Run Profile Deletion and Speeding up portal access

Hi,
My FIM 2010 R2 architecture uses 4 servers as follows:
1 x fim server, 1 x fim sql DB (fim service DB), 1 x sync server + fim SQL DB and 1 x SSPR
I have a PowerShell sync scripts running every 5 minutes which take fim portal changes and export those changes to AD.
I've created some PowerShell scripts for removing old run profiles, but am not sure how many run profiles to keep? Reading online I came across one blog post which mentions that Ms recommend no more than 10,000 run profile history entries - about 4 days
worth (although I can't find official Ms recommendations).
I'm assuming it's OK, but are there any issues with one script running a run profile at the same time as another script which deletes older run profiles?
On a side note, if anyone has any tips for speeding up fim portal access I'd be glad to hear them - each page in my environment takes about 30 seconds to load, regardless of the number of users connected.
thanks in advance
IT Support/Everything

On a side note, if anyone has any tips for speeding up fim portal access I'd be glad to hear them - each page in my environment takes about 30 seconds to load, regardless of the number of users connected.
If every page load of the FIM Portal is taking 30 seconds, something is broken in your environment. I get better performance than that running an entire test FIM configuration in virtualized machines on my laptop (AD, Exchange, FIM Portal/Service/Sync, etc.)
When you first start up the environment and bring up a given page the first time, it can take some time, but once you get to steady state, you should not be seeing delays like that.
Any chance you have an authentication configuration error (Kerberos settings, SPN assignment, DNS settings, etc.) that is causing authentication to time out on each page load?
During that 30 second delay, are any of your servers pegged on CPU or IO?
If this is a virtual environment or if you are using SAN based disk, do you have enough IOPS allocated?

Similar Messages

Unable to delete and update an ms access db

Hi,
I am presently working on a project in dreamweaver 8 which is
connected to an ms access db. I am completely new to both
applications but i have been able to connect to my database and
display information. As it is now i have both a delete button and
an edit button in a dynamic table which i created. How do i make
these buttons work. When the user clicks delete a message should
come up confirming the deletion. If anyone can assist me it will be
greatly appreciated. I have searched the internet for blocks of
code but cannot interpret the codes due to my lack of programming
knowledge. The following is the sample code for the delete button.
I dont know how to make the edit button work here also. I

I do not think that everything is already set as the password, the new e-mail. Now I have to update the application with no.
And a warning, as it!! Your Apple ID has been disabled!!.
If possible, you may be able to check my ID.
And to the point. So let me do the right thing.
..............................................Thanks again......................................................

I have a MacBook Pro 15" laptop PS CC, InD CC and Illust CC but cannot download Lightroom. The CC apps are running on an Intel chips, the mac is a 2006 model. Why won't Lightroom download if the other apps run just fine. and I can also access the Creativ

When I try to download Lightroom it tells me that it is no longer supported on the platform that Ii currently have. As stated I am using PS, InD and Illist all from the Creative Cloud without any problems, what gives?

Hi,
When you say you get an error message running the MacOS x installer disc, is it when you boot on the CD or when you insert the disc in your SuperDrive during an open session? Have you tried booting from the CD and running the Apple Hardware Test? From your list of trouble, it looks like a bad RAM, or maybe a corrup hard drive sector, but it could be something else entirely. Next time you boot, try verbose (press Command-V right after the gong), you'll see every step of boot on screen, it'll give some indication as to what makes your MBP hang up. You can also try to run AppleJack in Single-User mode (first install AppleJack ; download from here : http://applejack.sourceforge.net/ ; install as admin is required ; boot in SU by pressing Command-S at the gong): it's done wonders on my machine more than once...
"Oh, one more thing"... Is there anything connected to your MBP via USB/Firewire/Bluetooth? If so, try and unplug/disconnect everything, then boot up, just so we can rule a bad driver out.

Re: profile reset and speed too slow Again

I have just signed upto BT phone & Broadband, my line was connected on the 29th June 2012. Since then i have nothing but problems. No proper phone line until the 6th of July, thankfuly thats working well now.
Broadband was promised 17meg as im only 380 meters from the exchange, well thats what the engineer told me when installed the line.
I have raised a number of queries with customer support, first one got closed off with out being resolved, so now have raised the same issue again. So now have a new ref number
Problem being i only get 2.6meg download & point 0.83 upload speed, returns the same result which ever speedtest site you use.
I am now going to ask what my profile is & request a new one, I am spending every night on the phone to BT being told different stories.
I was told i will get a call back tomorrow at 4pm to find out if its improved at all, i don't expect a call back. As no one ever does. Im sorry BT when it comes to customer service you fail in every area.
I am in the process of wrinting a letter to your CEO Ian Livingstone to complain the way i have been treated.
If you have any ideas what the issue maybe then please feel free to post something of use, But if you are going to tell me to do a wired connection or reset the router & switch off for minutes & then try again. Please don't bother as ive been there & have a number of T shirts to show for it
Regards
a disgruntled BT customer, who is at the point of being an ex Bt customer.
Solved!
Go to Solution.

So are you saying i wll only ever get 2.6meg?
As requested
Line state:
Connected
Connection time:
0 day, 02:10:48
Downstream:
3,072 Kbps
Upstream:
1,179 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
30.2 dB / 8.7 dB
Line attenuation (Down/Up):
24.5 dB / 14.7 dB
Output power (Down/Up):
0.0 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
3 / 6

My iMac is running windows 7 and I can't access mac os to erase it

Hi there,
I've just bought a lovely early 2009 iMac which boots only into Windows 7. I know nothing of its history. I do not want this - I have a 10.7 disc I made ages ago. However when I try to do any of the normal things to install 10.7 I just get windows things. For example option-c brings up a "grub" command box, command-option just gives me a windows 7 option. Any ideas? Thank you

Please try the Alt key and see what happens.
GRUB also allows booting from USB or Live CDs. That is an option, if you want to try those.
If you can post a screen shot of the initial GRUB screen, it may be helpful to figure out other options.
Please see http://www.syslinux.org/wiki/index.php/ISOLINUX

Accidentally deleted firefox "profiles.ini" and now says firefox is already running when I try to open it.

Accidentally deleted firefox "profiles.ini" and now says firefox is already running when I try to open it. "a copy of firefox is already open. only one copy of firefox can be open at one time. Now I'm aware this happens often and people have posted solutions to this, but this situation is slightly different. The "profiles" that possibly had parental lock on it were deleted and I don't know how to get it back. Re-downloading firefox obviously does nothing. Opening the task manager and to try and close all mozilla/firefox files and apps doesn't work either. Tried using Onyx to turn invisible files visible but that didn't work either. I think it's cause I deleted the profiles. Suggestions?

Any chance of restoring that profiles.ini file via the Time Machine?
*http://kb.mozillazine.org/profiles.ini_file
If not then you need to use the Profile Manager to re-register that no longer recognized profile.<br />
You do that by creating a new profile and use Choose Location to point the your lost profile.
*http://kb.mozillazine.org/Profile_in_use
*http://kb.mozillazine.org/Recovering_a_missing_profile

After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

HELP! I tunes wouldn't update so I tried to delete and reinstall. I keep getting a message stating the installation source for this product is not available. Verify that the source exists and that you can access it. please help!!

Help! Itunes wouldn't update so I tried to delet and reinstall. I keep getting a message: The instillation source for this product is not available. Verify that the source exists and that you can access it. I also get this message: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below. Help I have no idea what that means or how to fix it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Firefox cannot find profile, even after deleting and re-installing.

I un-installed firefox when the problem first started, then re-installed it. Still cannot find profile. I went through the Profile Manager Wizard, but that didn't work. It couldn't find the program. I'm not on firefox now since it won't load.

See:
*https://support.mozilla.org/kb/how-run-firefox-when-your-profile-missing-or-inacc
This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 in this file is no longer present on the hard drive.
*Windows: %AppData%\Mozilla\Firefox\<br>C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Understanding run profiles and syncing

Hello,
I working on a FIM setup with the following run profiles:
File Ma -full import and delta sync (imports a bunch of users and email addresses from a CSV)
FIM Ma - Export, Delta Import, Delta Sync (Exports update MV changes to portal, imports to confirm the changes and then performs a sync for some reason)
AD Ma - Export and Delta Import
My understanding is that whenever a sync is done, it is done against the connector space and the MV, with each MA doing an import or export to the relevant CDS. What I'm not sure about is why I don't need to perform an AD Ma sync before exporting to
AD. My sync rules have been configured in the portal - would this be the reason?
If I didn't have my AD sync rules configured in the portal and ran everything from the sync service application would I need to do an AD MA sync?
Just trying to get a better understanding....
Thanks

Hi Peter,
Short answer is yes because the trigger to create the person in AD would be based on the synchronization rule and provisioning configuration being in the Portal. In reality its a bit more complex and really depends on how the provisioning is being done in
your environment.
Running a synchronization on the AD MA wouldn't normally result in a person being created in AD, its normally be for finding users in AD that need updating because their data is out of sync or flowing information back into FIM that AD is the authoritative
source for (such as user's objectSID) - there are other reasons but listing them all would take a while. I would recommend adding a synchronization step to your AD MA though to ensure that all the data is in sync.
Based on what you have described I'm assuming the provisioning is using the Set/MPR/Workflow triple in the Portal to create a user in AD - so below is a rundown of what is more than likely what is happening in the background.
1. File MA Import & Delta Sync - Imports the user from the file and synchronizes them into FIM Metaverse. The synchronization step also tells FIM to create them in the FIM Portal on the next export
Breaking up the next one a bit
2a. FIM MA - Export - this creates the user in the FIM Portal.
When the user is created in the Portal your AD Provisioning logic within the Portal gets applied to the user; and adds information telling FIM to create them in AD.
2b. FIM MA - Import - this imports the user from the FIM Portal including the information telling FIM to create them in AD
2c. FIM MA - Delta Sync - this synchronizes the updated information from the Portal into the Metaverse. When this synchronization runs FIM finds that the user needs to be created in AD on the next export
3. AD MA Export & Delta Import - The export creates the user in Active Directory and then the import "confirms" that the user has been created.
There are a few other ways that provisioning can happen but based on your description it sounds like the outline above should be what is happening in your environment.
Hope this helps! But I'd also recommend checking out some of the Technet articles on outbound/inbound synchronization -> http://technet.microsoft.com/en-us/library/ee621259(v=ws.10).aspx
Andrew.

TS3276 Accessing Gmail suddenly stopped working on both my Powerbook pro running latest OS and Mail versions and on my iPhone. I can access via the web. I get the error that my password or username is incorrect. I reset my password in Gmail and confirmed

Accessing Gmail suddenly stopped working on both my Powerbook pro running latest OS and Mail versions and on my iPhone. I can access via the web. I get the error that my password or username is incorrect. I reset my password in Gmail and confirmed it works on gmail, I then changed it on my Iphone and Mac Mail. It still does not work. I deleted the gamil account on mail on my mac and reinstalled it and it still will not work

I too started having my password rejected in MAIL.app for imap.mail.me.com for my icloud email address. Can login to icloud with web browser fine. This has been happening off and on for several days.....if I wait 2-3 hours it will suddenly start working again, but then problem re-asserts itself ;-)

User cannot access Crystal reports after user was deleted and recreated

We are using Crystal Enterprise XIr2. We are using Windows AD authentication. We had an issue with a user where they were deleted in Active Directory. Now they can no longer run Crystal reports. When I go into the CMC and open users I see this user. When I try to open this user I get the following error
There was an error while retrieving data from the server: Active Directory Authentication failed to get the Active Directory groups for the account with ID "8B003DF11D45B244AC3B61AB36B6C445:ALLENDG". Please make sure this account is valid and belongs to an accessible domain.
I think Crystal is still trying to access the user's old Active Directory account.
I cannot delete the user either in CMC.
Is there someway I can correct this user.
Thanks
Adam

Arjun - Thank you for your help. I looked in Central Management Console but I could not find what you indicated.
CMC--> Public Folder --> Administration Tools
In administration tool, there are two objects
1) Update Windows AD Group Graph
2) Update Windows AD Group Graph and Aliases --> Right click on this Report and click on RUN Now.
I ended up deleting the records for this user in these SQL tables and then user could access InfoView
CMS_Aliases5 (2 records for this user)
CMS_InfoObjects5 (1 record with both aliases)

Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

You can click on the text that says 'processing' in the main windows and it will open (toggle) the Activity Window, (can also be accessed via the Window menu -> Show Activity.
It will tell you what Aperture is doing with more precision and perhaps even how many photos it still needs to process. It is generally best to wait until all that processing is done before you start working with the photos (well it is best to first turn of options what you dont want to use, perhaps Faces or Previews and then let it process the new photos).

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

I corrupted the firefox profile file using profile manager and firefox thinks it is still running and asks me to close but there is no instance of it running...I have tried several re-installs but cannot resolve the problem....

.........I have deleted the .ini file associated with the profile file and the profile file itself...have tried to locate the "lock" file but cannot find the file in the specified path on the support forum for this problem....I believe there is a file mounted in another directory somewhere that firefox is seeing....I would really like to be able to use firefox as the default browser on this new linux (ubuntu) install...it was working prior to my trying to import my profile from the windows partition.....

See this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Run Profile Deletion and Speeding up portal access

Similar Messages

Maybe you are looking for