Run Rapid Install error:InDbCtxFile.uploadCtx()
Hi,
We are upgrading from 11.5.10.2(Database 10.2.0.3) to 12.0.4,while doing the Rapid Install wizard to lay down the file system,i have seen the errors in logfile as below.
1)Attempting upload of Context file and templates to database...ERROR: InDbCtxFile.uploadCtx() : Exception : Error executng BEGIN
fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; The element reports_port is missing from the context file
/u1690/oracle/oad6/inst/apps/oad6_dnalx750/appl/admin/oad6_dnalx750.xml. The context file upload will not continue.
FAILED
2)Executing service control script:
/u1690/oracle/oad6/inst/apps/oad6_dnalx750/admin/scripts/adformsctl.sh start
script returned:
Please let me know,how to resolve this errors.
Hi,
Did the installation complete successfully (i.e. the "Validate System Configuration" verifies that the configuration is correct)? If so, then you can ignore those errors and proceed with the upgrade.
From the (Upgrade Manual), Page 2-19 ..
Rapid Install (as it runs AutoConfig) records errors in the AutoConfig log file. These errors occur because the database has not yet been upgraded. They can be safely ignored. The errors will be resolved when you run Rapid Install (and AutoConfig) in Step 2 of the Finish the Upgrade section of Chapter 3.
Regards,
Hussein
Edited by: hsawwan on Apr 3, 2009 9:57 PM -- Added the paragrpah from the "Upgrade Manual"
Similar Messages
-
ERROR: InDbCtxFile.uploadCtx() : Exception While Running Autoconfig
While running autoconfig, we are getting this error.
Attempting upload of Context file and templates to database...ERROR: InDbCtxFile.uploadCtx() : Exception : Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; The element reports_port is missing from the context file /u01/R12/inst/apps/upg_peabody/appl/admin/upg_peabody.xml. The context file upload will not continue.
oracle.apps.ad.autoconfig.oam.InDbCtxFileException: Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; The element reports_port is missing from the context file /u01/R12/inst/apps/upg_peabody/appl/admin/upg_peabody.xml. The context file upload will not continue.
at oracle.apps.ad.autoconfig.oam.InDbCtxFile.uploadCtx(InDbCtxFile.java:281)
at oracle.apps.ad.autoconfig.oam.CtxSynchronizer.uploadToDb(CtxSynchronizer.java:328)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:678)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1583)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:684)If this is part of the upgrade,
yes< we are doing Upgrade 11i to R12
please note that Rapid Install (as it runs AutoConfig) records errors in the AutoConfig log file. These errors occur because the database has not yet been upgraded. They can be safely ignored. The errors will be resolved when you run Rapid Install (and AutoConfig) in Step 2 of the Finish the Upgrade section of Chapter 3.
Sawwan, We already upgraded database to 10g (10.2.0.4) -
Prepare for the up-grade - Run Rapid Install
Hi,
During up-grade of 11.5.9 to R-12 on Windows 2003.
Ch-2 Prepare for the Upgrade
Step-3, Run Rapid Install.
I have confusion before running to Step-3,
Is there need to install pre-requisite of R-12 installetion like (Visual c++ 2005, MKS, GNU) with reference to note 402311.1 ??
Best Regards,Is there need to install pre-requisite of R-12 installetion like (Visual c++ 2005, MKS, GNU) with reference to note 402311.1 ??Yes, you need to have all pre-req. software installed before starting RapidWiz.
-
EBS 12.1.1 Windows x86 Rapid Install Errors
By this point, I am CONVINCED that R12.1.1 is broken for windows x86, in the form that it is delivered at edelivery. I have tried installing it on 2k3 and XP all with the exact same errors. I have also tried the latest rapid install/StartCD version 12.1.1.10 released on 29th June with the EXACT same results.The following are the most common problems:
1) After starting Rapid Install, the first step is to cache the StartCD in the Temp directory under windows. Just as this step is about to complete you get the following error:
Windows cannot find '.\jre\NT\1.5.0\bin\java'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
2) Sooooo, I copied a JRE 1.5.X folder contents into the new \jre\NT\1.5.0 folder under rapidwiz, the absence of which was causing the above error. This allowed me to go past this error only to stumble on this next error. At this point, Rapid Install just stops abruptly. The error as stated in the rapidwiz log is as follows:
Starting from CD area C:\temp\07261549
RW-50010: Error: - script has returned an error: 2
Returning - 0
Funny thing is, one of the bug fixes in 12.1.1.10 is the above error. I dont know what was fixed, but I do not see a difference in the behavior.
NOTE: I tried keeping the 1.6.0 JRE that comes with the startcd in to the newly created 1.5.0 folder with the same results.
I can't help thinking that the two errors are related, ie., my fix for bypassing the first error might be causing the second error.
As most of you are likely to ask some standard questions, I'll just post their answers before you do.
1) My setup is a VM under VMWare Workstation 6.5 with a single network adapter that is a Host Only networked adapter with a static IP.
2) It does not matter if I do a Express Install or otherwise.
3) Errors are repeatable on multiple hardware platforms, my host system is an 8 core opteron server with 16GB RAM. My VMs have 3GB RAM and 2 virtual processors assigned. Errors were repeatable on a laptop with a turion x2 processor and one with an Intel Core 2 Duo.
4) I am using CYGWIN and it was installed using the Metalink note describing how CYGWIN needs to be installed/configured for oracle applications install.
5) R 11.5.10.2 was successfully installed on all VMs/Laptops.
6) There are no spaces in any of the paths.
7) The staging area was created with StageR12 as the root folder under a Local Hard Drive to the VM/Machine.
8) I get ABSOLUTELY no warnings/errors with my Rapid Install during the pre-requisites check phase. Following is a sample log:
Oracle Applications Rapid Install Wizard Install log
Using Rapid Wizard Version : 12.1.1.10
Install session started : Sun Jul 26 15:54:42 EDT 2009
Rapid Wizard source location : C:\temp\07261549\rapidinstall
Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : oapps
Host Operating System : Windows (32-bit)
User running Install : Administrator
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Create configuration
Description : Creates a new instance configuration.
InstUpgPanel
User action : Install Oracle Applications
Install type : Express Install
Disabling OCM Configuration
Derived ports from port pool: 0
Derived ports from port pool: 20
Database Port : 1541
RPC Port : 1646
Web SSL Port : 4463
ONS Local Port : 6120
ONS Remote Port : 6220
ONS Request Port : 6520
Web Listener Port : 8020
Active Web Port : 8020
Forms Port : 9020
Metrics Server Data Port : 9120
Metrics Server Request Port : 9220
JTF Fulfillment Server Port : 9320
MSCA Server Port : 10320-10325
MCSA Telnet Server Port : 10320,10322,10324
MSCA Dispatcher Port : 10860
Java Object Cache Port : 12365
OC4J JMS Port Range for Oacore : 23100-23104
OC4J JMS Port Range for Forms : 23600-23604
OC4J JMS Port Range for Home : 24100-24104
OC4J JMS Port Range for Oafm : 24600-24604
OC4J AJP Port Range for Oacore : 21600-21604
OC4J AJP Port Range for Forms : 22100-22104
OC4J AJP Port Range for Home : 22600-22604
OC4J AJP Port Range for Oafm : 25100-25104
OC4J RMI Port Range for Oacore : 20100-20104
OC4J RMI Port Range for Forms : 20600-20604
OC4J RMI Port Range for Home : 21100-21104
OC4J RMI Port Range for Oafm : 25600-25604
DB ONS Local Port : 6320
DB ONS Remote Port : 6420
Oracle Connection Manager Port : 1541
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
ExpressInstallPanel
Writing configuration file to: O:\oracle\VISN\db\tech_st\11.1.0\appsutil\conf_VISN.txt
Adding ports for Server0_oapps
Setting port s_db_ons_localport to 6320
Setting port s_db_ons_remoteport to 6420
Setting port s_cmanport to 1541
Adding ports for Server1_oapps
Setting port s_rpcport to 1646
Setting port s_webssl_port to 4463
Setting port s_ons_localport to 6120
Setting port s_ons_remoteport to 6220
Setting port s_ons_requestport to 6520
Setting port s_webport to 8020
Setting port s_active_webport to 8020
Setting port s_formsport to 9020
Setting port s_metdataport to 9120
Setting port s_metreqport to 9220
Setting port s_jtfuf_port to 9320
Setting port s_mwaPortNo to 10320-10325
Setting port s_mwaTelnetPortNo to 10320,10322,10324
Setting port s_mwaDispatcherPort to 10860
Setting port s_java_object_cache_port to 12365
Setting port s_oacore_jms_portrange to 23100-23104
Setting port s_forms_jms_portrange to 23600-23604
Setting port s_home_jms_portrange to 24100-24104
Setting port s_oafm_jms_portrange to 24600-24604
Setting port s_oacore_ajp_portrange to 21600-21604
Setting port s_forms_ajp_portrange to 22100-22104
Setting port s_home_ajp_portrange to 22600-22604
Setting port s_oafm_ajp_portrange to 25100-25104
Setting port s_oacore_rmi_portrange to 20100-20104
Setting port s_forms_rmi_portrange to 20600-20604
Setting port s_home_rmi_portrange to 21100-21104
Setting port s_oafm_rmi_portrange to 25600-25604
Writing configuration file to: O:\oracle\VISN\apps\apps_st\appl\admin\oapps\conf_VISN.txt
Adding ports for Server0_oapps
Setting port s_db_ons_localport to 6320
Setting port s_db_ons_remoteport to 6420
Setting port s_cmanport to 1541
Adding ports for Server1_oapps
Setting port s_rpcport to 1646
Setting port s_webssl_port to 4463
Setting port s_ons_localport to 6120
Setting port s_ons_remoteport to 6220
Setting port s_ons_requestport to 6520
Setting port s_webport to 8020
Setting port s_active_webport to 8020
Setting port s_formsport to 9020
Setting port s_metdataport to 9120
Setting port s_metreqport to 9220
Setting port s_jtfuf_port to 9320
Setting port s_mwaPortNo to 10320-10325
Setting port s_mwaTelnetPortNo to 10320,10322,10324
Setting port s_mwaDispatcherPort to 10860
Setting port s_java_object_cache_port to 12365
Setting port s_oacore_jms_portrange to 23100-23104
Setting port s_forms_jms_portrange to 23600-23604
Setting port s_home_jms_portrange to 24100-24104
Setting port s_oafm_jms_portrange to 24600-24604
Setting port s_oacore_ajp_portrange to 21600-21604
Setting port s_forms_ajp_portrange to 22100-22104
Setting port s_home_ajp_portrange to 22600-22604
Setting port s_oafm_ajp_portrange to 25100-25104
Setting port s_oacore_rmi_portrange to 20100-20104
Setting port s_forms_rmi_portrange to 20600-20604
Setting port s_home_rmi_portrange to 21100-21104
Setting port s_oafm_rmi_portrange to 25600-25604
Writing configuration file to: O:\oracle\VISN\inst\apps\VISN_oapps\conf_VISN.txt
Adding ports for Server0_oapps
Setting port s_db_ons_localport to 6320
Setting port s_db_ons_remoteport to 6420
Setting port s_cmanport to 1541
Adding ports for Server1_oapps
Setting port s_rpcport to 1646
Setting port s_webssl_port to 4463
Setting port s_ons_localport to 6120
Setting port s_ons_remoteport to 6220
Setting port s_ons_requestport to 6520
Setting port s_webport to 8020
Setting port s_active_webport to 8020
Setting port s_formsport to 9020
Setting port s_metdataport to 9120
Setting port s_metreqport to 9220
Setting port s_jtfuf_port to 9320
Setting port s_mwaPortNo to 10320-10325
Setting port s_mwaTelnetPortNo to 10320,10322,10324
Setting port s_mwaDispatcherPort to 10860
Setting port s_java_object_cache_port to 12365
Setting port s_oacore_jms_portrange to 23100-23104
Setting port s_forms_jms_portrange to 23600-23604
Setting port s_home_jms_portrange to 24100-24104
Setting port s_oafm_jms_portrange to 24600-24604
Setting port s_oacore_ajp_portrange to 21600-21604
Setting port s_forms_ajp_portrange to 22100-22104
Setting port s_home_ajp_portrange to 22600-22604
Setting port s_oafm_ajp_portrange to 25100-25104
Setting port s_oacore_rmi_portrange to 20100-20104
Setting port s_forms_rmi_portrange to 20600-20604
Setting port s_home_rmi_portrange to 21100-21104
Setting port s_oafm_rmi_portrange to 25600-25604
Writing configuration file to: C:\Temp\07261554\conf_VISN.txt
Adding ports for Server0_oapps
Setting port s_db_ons_localport to 6320
Setting port s_db_ons_remoteport to 6420
Setting port s_cmanport to 1541
Adding ports for Server1_oapps
Setting port s_rpcport to 1646
Setting port s_webssl_port to 4463
Setting port s_ons_localport to 6120
Setting port s_ons_remoteport to 6220
Setting port s_ons_requestport to 6520
Setting port s_webport to 8020
Setting port s_active_webport to 8020
Setting port s_formsport to 9020
Setting port s_metdataport to 9120
Setting port s_metreqport to 9220
Setting port s_jtfuf_port to 9320
Setting port s_mwaPortNo to 10320-10325
Setting port s_mwaTelnetPortNo to 10320,10322,10324
Setting port s_mwaDispatcherPort to 10860
Setting port s_java_object_cache_port to 12365
Setting port s_oacore_jms_portrange to 23100-23104
Setting port s_forms_jms_portrange to 23600-23604
Setting port s_home_jms_portrange to 24100-24104
Setting port s_oafm_jms_portrange to 24600-24604
Setting port s_oacore_ajp_portrange to 21600-21604
Setting port s_forms_ajp_portrange to 22100-22104
Setting port s_home_ajp_portrange to 22600-22604
Setting port s_oafm_ajp_portrange to 25100-25104
Setting port s_oacore_rmi_portrange to 20100-20104
Setting port s_forms_rmi_portrange to 20600-20604
Setting port s_home_rmi_portrange to 21100-21104
Setting port s_oafm_rmi_portrange to 25600-25604
Setting temp directory to: C:\Temp\07261554\
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VIS_db.xml
dest : C:\Temp\07261554\oapps_VIS_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1541
Database Port Value = 1541...... Available
DB ONS Local Port available: Port Value = 6320
DB ONS Local Port Value = 6320...... Available
DB ONS Remote Port available: Port Value = 6420
DB ONS Remote Port Value = 6420...... Available
-- apps node ports --
RPC Port available: Port Value = 1646
RPC Port Value = 1646...... Available
Web SSL Port available: Port Value = 4463
Web SSL Port Value = 4463...... Available
ONS Local Port available: Port Value = 6120
ONS Local Port Value = 6120...... Available
ONS Remote Port available: Port Value = 6220
ONS Remote Port Value = 6220...... Available
ONS Request Port available: Port Value = 6520
ONS Request Port Value = 6520...... Available
Web Listener Port available: Port Value = 8020
Web Listener Port Value = 8020...... Available
Forms Port available: Port Value = 9020
Forms Port Value = 9020...... Available
Metrics Server Data Port available: Port Value = 9120
Metrics Server Data Port Value = 9120...... Available
Metrics Server Request Port available: Port Value = 9220
Metrics Server Request Port Value = 9220...... Available
JTF Fulfillment Server Port available: Port Value = 9320
JTF Fulfillment Server Port Value = 9320...... Available
MSCA Server Port available: Port Value = 10320
MSCA Server Port available: Port Value = 10321
MSCA Server Port available: Port Value = 10322
MSCA Server Port available: Port Value = 10323
MSCA Server Port available: Port Value = 10324
MSCA Server Port available: Port Value = 10325
MSCA Server Port Value = 10320-10325...... Available
MSCA Dispatcher Port available: Port Value = 10860
MSCA Dispatcher Port Value = 10860...... Available
Java Object Cache Port available: Port Value = 12365
Java Object Cache Port Value = 12365...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23100
OC4J JMS Port Range for Oacore available: Port Value = 23101
OC4J JMS Port Range for Oacore available: Port Value = 23102
OC4J JMS Port Range for Oacore available: Port Value = 23103
OC4J JMS Port Range for Oacore available: Port Value = 23104
OC4J JMS Port Range for Oacore Value = 23100-23104...... Available
OC4J JMS Port Range for Forms available: Port Value = 23600
OC4J JMS Port Range for Forms available: Port Value = 23601
OC4J JMS Port Range for Forms available: Port Value = 23602
OC4J JMS Port Range for Forms available: Port Value = 23603
OC4J JMS Port Range for Forms available: Port Value = 23604
OC4J JMS Port Range for Forms Value = 23600-23604...... Available
OC4J JMS Port Range for Home available: Port Value = 24100
OC4J JMS Port Range for Home available: Port Value = 24101
OC4J JMS Port Range for Home available: Port Value = 24102
OC4J JMS Port Range for Home available: Port Value = 24103
OC4J JMS Port Range for Home available: Port Value = 24104
OC4J JMS Port Range for Home Value = 24100-24104...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24600
OC4J JMS Port Range for Oafm available: Port Value = 24601
OC4J JMS Port Range for Oafm available: Port Value = 24602
OC4J JMS Port Range for Oafm available: Port Value = 24603
OC4J JMS Port Range for Oafm available: Port Value = 24604
OC4J JMS Port Range for Oafm Value = 24600-24604...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21600
OC4J AJP Port Range for Oacore available: Port Value = 21601
OC4J AJP Port Range for Oacore available: Port Value = 21602
OC4J AJP Port Range for Oacore available: Port Value = 21603
OC4J AJP Port Range for Oacore available: Port Value = 21604
OC4J AJP Port Range for Oacore Value = 21600-21604...... Available
OC4J AJP Port Range for Forms available: Port Value = 22100
OC4J AJP Port Range for Forms available: Port Value = 22101
OC4J AJP Port Range for Forms available: Port Value = 22102
OC4J AJP Port Range for Forms available: Port Value = 22103
OC4J AJP Port Range for Forms available: Port Value = 22104
OC4J AJP Port Range for Forms Value = 22100-22104...... Available
OC4J AJP Port Range for Home available: Port Value = 22600
OC4J AJP Port Range for Home available: Port Value = 22601
OC4J AJP Port Range for Home available: Port Value = 22602
OC4J AJP Port Range for Home available: Port Value = 22603
OC4J AJP Port Range for Home available: Port Value = 22604
OC4J AJP Port Range for Home Value = 22600-22604...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25100
OC4J AJP Port Range for Oafm available: Port Value = 25101
OC4J AJP Port Range for Oafm available: Port Value = 25102
OC4J AJP Port Range for Oafm available: Port Value = 25103
OC4J AJP Port Range for Oafm available: Port Value = 25104
OC4J AJP Port Range for Oafm Value = 25100-25104...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20100
OC4J RMI Port Range for Oacore available: Port Value = 20101
OC4J RMI Port Range for Oacore available: Port Value = 20102
OC4J RMI Port Range for Oacore available: Port Value = 20103
OC4J RMI Port Range for Oacore available: Port Value = 20104
OC4J RMI Port Range for Oacore Value = 20100-20104...... Available
OC4J RMI Port Range for Forms available: Port Value = 20600
OC4J RMI Port Range for Forms available: Port Value = 20601
OC4J RMI Port Range for Forms available: Port Value = 20602
OC4J RMI Port Range for Forms available: Port Value = 20603
OC4J RMI Port Range for Forms available: Port Value = 20604
OC4J RMI Port Range for Forms Value = 20600-20604...... Available
OC4J RMI Port Range for Home available: Port Value = 21100
OC4J RMI Port Range for Home available: Port Value = 21101
OC4J RMI Port Range for Home available: Port Value = 21102
OC4J RMI Port Range for Home available: Port Value = 21103
OC4J RMI Port Range for Home available: Port Value = 21104
OC4J RMI Port Range for Home Value = 21100-21104...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25600
OC4J RMI Port Range for Oafm available: Port Value = 25601
OC4J RMI Port Range for Oafm available: Port Value = 25602
OC4J RMI Port Range for Oafm available: Port Value = 25603
OC4J RMI Port Range for Oafm available: Port Value = 25604
OC4J RMI Port Range for Oafm Value = 25600-25604...... Available
OS User and Group Check
Domain=OAPPS
,Username=Administrator
,PC-Name=OAPPS
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0
Database ORACLE_HOME admin folder available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0\appsutil\log\VISN_oapps
Database Install Out Directory available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0\appsutil\out\VISN_oapps\templbac
Database Install Out Directory available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0\appsutil\out\VISN_oapps\templbac
OCM configuration target directory available:
Mount Point = O:\oracle\VISN\db\tech_st\11.1.0\appsutil\clone
Database System File Directory available:
Mount Point = O:\oracle\VISN\db\apps_st\data
Database Log File Directory available:
Mount Point = O:\oracle\VISN\db\apps_st\data
Database Transaction File Directory available:
Mount Point = O:\oracle\VISN\db\apps_st\data
Database Archive File Directory available:
Mount Point = O:\oracle\VISN\db\apps_st\data
Database OraInventory File Directory available:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP available:
Mount Point = O:\oracle\VISN\apps\apps_st\appl
APPL_TOP admin available:
Mount Point = O:\oracle\VISN\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = O:\oracle\VISN\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = O:\oracle\VISN\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = O:\oracle\VISN\apps\apps_st\appl
COMMON_TOP available:
Mount Point = O:\oracle\VISN\apps\apps_st\comn
JAVA_TOP available:
Mount Point = O:\oracle\VISN\apps\apps_st\comn\java\classes
Temp Directory available:
Mount Point = O:\oracle\VISN\inst\apps\VISN_oapps\temp
APPL_TOP admin Install Log Directory available:
Mount Point = O:\oracle\VISN\inst\apps\VISN_oapps\admin\log
Apps ORACLE_HOME available:
Mount Point = O:\oracle\VISN\apps\tech_st\10.1.3
Tools ORACLE_HOME available:
Mount Point = O:\oracle\VISN\apps\tech_st\10.1.2
OCM configuration target directory available:
Mount Point = O:\oracle\VISN\apps\tech_st\10.1.3\appsutil\clone
OCM configuration target directory available:
Mount Point = O:\oracle\VISN\apps\tech_st\10.1.2\appsutil\clone
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: O:\oracle\VISN\db\tech_st\11.1.0\appsutil\conf_VISN.txt
Adding ports for Server0_oapps
Setting port s_db_ons_localport to 6320
Setting port s_db_ons_remoteport to 6420
Setting port s_cmanport to 1541
Adding ports for Server1_oapps
Setting port s_rpcport to 1646
Setting port s_webssl_port to 4463
Setting port s_ons_localport to 6120
Setting port s_ons_remoteport to 6220
Setting port s_ons_requestport to 6520
Setting port s_webport to 8020
Setting port s_active_webport to 8020
Setting port s_formsport to 9020
Setting port s_metdataport to 9120
Setting port s_metreqport to 9220
Setting port s_jtfuf_port to 9320
Setting port s_mwaPortNo to 10320-10325
Setting port s_mwaTelnetPortNo to 10320,10322,10324
Setting port s_mwaDispatcherPort to 10860
Setting port s_java_object_cache_port to 12365
Setting port s_oacore_jms_portrange to 23100-23104
Setting port s_forms_jms_portrange to 23600-23604
Setting port s_home_jms_portrange to 24100-24104
Setting port s_oafm_jms_portrange to 24600-24604
Setting port s_oacore_ajp_portrange to 21600-21604
Setting port s_forms_ajp_portrange to 22100-22104
Setting port s_home_ajp_portrange to 22600-22604
Setting port s_oafm_ajp_portrange to 25100-25104
Setting port s_oacore_rmi_portrange to 20100-20104
Setting port s_forms_rmi_portrange to 20600-20604
Setting port s_home_rmi_portrange to 21100-21104
Setting port s_oafm_rmi_portrange to 25600-25604
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = O:\oracle\VISN\db\tech_st\11.1.0
required = 5600.0
actual = 446808.046875
Disk space on system acceptable:
Database System File Directory = O:\oracle\VISN\db\apps_st\data
required = 20200.0
actual = 441208.046875
Disk space on system acceptable:
Database Log File Directory = O:\oracle\VISN\db\apps_st\data
required = 950.0
actual = 421008.046875
Disk space on system acceptable:
Database Transaction File Directory = O:\oracle\VISN\db\apps_st\data
required = 103350.0
actual = 420058.046875
Disk space on system acceptable:
Database Archive File Directory = O:\oracle\VISN\db\apps_st\data
required = 64500.0
actual = 316708.046875-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = O:\oracle\VISN\apps\apps_st\appl
required = 5800.0
actual = 252208.046875
Disk space on system acceptable:
APPL_TOP mount 2 = O:\oracle\VISN\apps\apps_st\appl
required = 2800.0
actual = 246408.046875
Disk space on system acceptable:
APPL_TOP mount 3 = O:\oracle\VISN\apps\apps_st\appl
required = 8400.0
actual = 243608.046875
Disk space on system acceptable:
APPL_TOP mount 4 = O:\oracle\VISN\apps\apps_st\appl
required = 3100.0
actual = 235208.046875
Disk space on system acceptable:
COMMON_TOP = O:\oracle\VISN\apps\apps_st\comn
required = 3200.0
actual = 232108.046875
Disk space on system acceptable:
Apps ORACLE_HOME = O:\oracle\VISN\apps\tech_st\10.1.3
required = 1400.0
actual = 228908.046875
Disk space on system acceptable:
Tools ORACLE_HOME = O:\oracle\VISN\apps\tech_st\10.1.2
required = 1400.0
actual = 227508.046875
Disk space on system acceptable:
Temp Directory = O:\oracle\VISN\inst\apps\VISN_oapps\temp
required = 1024.0
actual = 226108.046875
Host/Domain
command: ping -n 1 oapps
Pinging oapps.oracle.local http://192.168.163.4 with 32 bytes of data:
Reply from 192.168.163.4: bytes=32 time=2ms TTL=128
Ping statistics for 192.168.163.4:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 2ms, Average = 2ms
host ping has succeeded
command: ping -n 1 oapps.oracle.local
Pinging oapps.oracle.local http://192.168.163.4 with 32 bytes of data:
Reply from 192.168.163.4: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.163.4:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\temp\07261549\rapidinstall\bin\adchkutl.cmd C:\cygwin\bin C:\MSVS8\VC
C:\temp\07261549\rapidinstall>echo off
Setting environment for using Microsoft Visual Studio 2005 x86 tools.
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/MSVS8/VC/BIN/cl
'cc' is available.
/cygdrive/c/MSVS8/VC/BIN/link
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has succeeded
Database Port : 1541
RPC Port : 1646
Web SSL Port : 4463
ONS Local Port : 6120
ONS Remote Port : 6220
ONS Request Port : 6520
Web Listener Port : 8020
Active Web Port : 8020
Forms Port : 9020
Metrics Server Data Port : 9120
Metrics Server Request Port : 9220
JTF Fulfillment Server Port : 9320
MSCA Server Port : 10320-10325
MCSA Telnet Server Port : 10320,10322,10324
MSCA Dispatcher Port : 10860
Java Object Cache Port : 12365
OC4J JMS Port Range for Oacore : 23100-23104
OC4J JMS Port Range for Forms : 23600-23604
OC4J JMS Port Range for Home : 24100-24104
OC4J JMS Port Range for Oafm : 24600-24604
OC4J AJP Port Range for Oacore : 21600-21604
OC4J AJP Port Range for Forms : 22100-22104
OC4J AJP Port Range for Home : 22600-22604
OC4J AJP Port Range for Oafm : 25100-25104
OC4J RMI Port Range for Oacore : 20100-20104
OC4J RMI Port Range for Forms : 20600-20604
OC4J RMI Port Range for Home : 21100-21104
OC4J RMI Port Range for Oafm : 25600-25604
DB ONS Local Port : 6320
DB ONS Remote Port : 6420
Oracle Connection Manager Port : 1541
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxdbctx.tmp
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_db.xml
dest : C:\Temp\07261554\oapps_VISN_db.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\temp\07261549\rapidinstall\etc\adxmlctx.tmp
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
instantiate file:
source : C:\Temp\07261554\oapps_VISN_apps.xml
dest : C:\Temp\07261554\oapps_VISN_apps.xml
ExpressInstallPanel
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from CD area C:\temp\07261549
RW-50010: Error: - script has returned an error: 2
Returning - 0 -
Rapid install error while installeing v12
Hello -
I am getting the following error when trying to install ORacle applications v12 on oracle enterprise linux4 update5 on the desktop
Regards
mahesh mattupalli
Statusstring Installing Applications Technology Stack
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
Checking Disk contents in - /u01/StageR12/startCD/Disk1/rapidwiz
Checking Disk contents in - /u01/StageR12/oraAS/Disk1
Checking Disk contents in - /u01/StageR12/oraAS/Disk1
Unzip Count:56
Processing Disk1....
Processing Disk2....
RW-00041: Error: - Invalid disk.label file disk.label. Incorrect value for Label, Number or for OS
AC-00023: Error: Exception: java.io.FileNotFoundException: /d01/oracle/PROD/inst/apps/PROD_oradev/temp/restart.xml (Permission denied) occured while writing Context file - /d01/oracle/PROD/inst/apps/PROD_oradev/temp/restart.xml
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 3 :
Checking Disk contents in - /u01/StageR12/startCD/Disk1/rapidwiz
Checking Disk contents in - /u01/StageR12/oraAS/Disk3
Checking Disk contents in - /u01/StageR12/startCD/Disk1/rapidwiz
Checking Disk contents in - /u01/StageR12/startCD/Disk1/rapidwiz
Checking Disk contents in - /u01/StageR12/startCD/Disk1/rapidwiz
Checking Disk contents in - /u01/StageR12/
Checking Disk contents in - /u01/StageR12/http://oradev.mahesh.com:8000/OA_HTML/AppsLogin
Not Found
The requested URL /OA_HTML/AppsLogin was not found on this server.
I was not able to produce java exception error. Server rebooted.
In order to bring the apps server up i ran the script adstrtal.sh as applmgr user, the following is the error log.
thanks for your help.
===
==
==
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_CRP.
adalnctl.sh: exiting with status 127
adalnctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
grep: /d01/oracle/CRP/inst/apps/CRP_oradev/ora/10.1.2/network/admin/listener.ora: No such file or directory
======
==
==
You are running adapcctl.sh version 120.6
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 150
adapcctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adapcctl.txt for more information ...
====
==
==
You are running adoacorectl.sh version 120.11
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 150
adoacorectl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
===
==
==
script returned:
You are running adformsctl.sh version 120.12
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 150
adformsctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
====
==
==
You are running adoafmctl.sh version 120.6
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
===
==
==
You are running adoafmctl.sh version 120.6
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
====
==
==
adalnctl.sh: exiting with status 127
adalnctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
grep: /d01/oracle/CRP/inst/apps/CRP_oradev/ora/10.1.2/network/admin/listener.ora: No such file or directory
.end err out
===
==
==
adalnctl.sh: exiting with status 127
adalnctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
grep: /d01/oracle/CRP/inst/apps/CRP_oradev/ora/10.1.2/network/admin/listener.ora: No such file or directory
.end err out.
===
==
==
ServiceControl is exiting with status 1
Setting service Root Service Group to mode 2
Administering services for the service group Root Service Group
Executing service control script:
/d01/oracle/CRP/inst/apps/CRP_oradev/admin/scripts/adopmnctl.sh start
Timeout specified in context file: 100 second(s)
==
==
==
You are running adapcctl.sh version 120.6
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 150
adapcctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adapcctl.txt for more information ...
.end std out.
==
==
==
You are running adoacorectl.sh version 120.11
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 150
adoacorectl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out
==
==
==
You are running adformsctl.sh version 120.12
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 150
adformsctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
==
==
\==
You are running adoafmctl.sh version 120.6
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
==
==
==
Checking for FNDFS executable.
Starting listener process APPS_CRP.
adalnctl.sh: exiting with status 127
adalnctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
grep: /d01/oracle/CRP/inst/apps/CRP_oradev/ora/10.1.2/network/admin/listener.ora: No such file or directory
.end err out.
==
==
==
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_CRP.
adalnctl.sh: exiting with status 127
adalnctl.sh: check the logfile /d01/oracle/CRP/inst/apps/CRP_oradev/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
grep: /d01/oracle/CRP/inst/apps/CRP_oradev/ora/10.1.2/network/admin/listener.ora: No such file or directory -
11i Install errors on Windows 2003
Hi all
I've downloaded 11i.10.2 from the edelivery site, and unzipped all files to E:, so my staging area looks like E:\startCD, E:\oraDB, etc.
All the pre-install checks come up fine, however, the install fails on step 2 with the following error:
RW-50004:Error code received while running external process.Check log file for details.
Running Database Install Driver for ACC instance.
[Aside: This is the second time this has happened, the first using VIS for the SID. I now can't use VIS or ACC for the SID, as there are services set up for each of these. Does any one know how to remove these services (Start -> Administrative Tools -> Services)?]
The log file for the error shows the following (only the last part - it's too long to post the whole thing, even this is a bit long):
E:\startCD\Disk1\rapidwiz>(set date=19/05/2007 )
E:\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
E:\startCD\Disk1\rapidwiz>(set time=08:13 )
E:\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : DATABASE : 19/05/2007 08:13
STARTED INSTALL PHASE : DATABASE : 19/05/2007 08:13
E:\startCD\Disk1\rapidwiz>SET JRE_PATH=E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\bin\java
E:\startCD\Disk1\rapidwiz>SET JRE_CP=.;E:\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\rt.jar;E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\i18n.jar;E:\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;E:\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;E:\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;E:\startCD\Disk1\rapidwiz\jlib\jnls.jar;E:\startCD\Disk1\rapidwiz\jlib\acc.jar;E:\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;E:\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;E:\startCD\Disk1\rapidwiz\jlib\netcfg.jar;E:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;E:\startCD\Disk1\rapidwiz\jlib\java
E:\startCD\Disk1\rapidwiz>SET XML_FILE=f:\Oracle\accdb\9.2.0\appsutil\ACC_alardserver.xml
E:\startCD\Disk1\rapidwiz>SET PATH=E:\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;D:\VisualStudio\VC\bin;D:\VisualStudio\VC;D:\GNU;D:\GNU\make-3.81\WinRel;D:\GNU\make-3.81\WinDebug
E:\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
E:\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=8 )
E:\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Install database will only happen, if database is "db920"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "db920" == "db817" goto :NO_DB
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Display path and classpath settings for logging
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Setting PATH to - E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\bin\java -"
"Setting PATH to - E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\bin\java -"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Setting CLASSPATH to - .;E:\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\rt.jar;E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\i18n.jar;E:\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;E:\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;E:\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;E:\startCD\Disk1\rapidwiz\jlib\jnls.jar;E:\startCD\Disk1\rapidwiz\jlib\acc.jar;E:\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;E:\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;E:\startCD\Disk1\rapidwiz\jlib\netcfg.jar;E:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;E:\startCD\Disk1\rapidwiz\jlib\java -"
"Setting CLASSPATH to - .;E:\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\rt.jar;E:\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\i18n.jar;E:\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;E:\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;E:\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;E:\startCD\Disk1\rapidwiz\jlib\jnls.jar;E:\startCD\Disk1\rapidwiz\jlib\acc.jar;E:\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;E:\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;E:\startCD\Disk1\rapidwiz\jlib\netcfg.jar;E:\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;E:\startCD\Disk1\rapidwiz\jlib\java -"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM These steps only happen when dbseed is not "No Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "Vision Demo" == "No Database" goto :NO_DB
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM UPDATE rollback segs in context
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "Vision Demo" == "Fresh Install" goto :FI_DB
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set DRVNAME=gvision.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 0 == 0 goto :UPD_RBS_VI_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>goto :DONE_WITH_RBS
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "f:\Oracle\accdb\9.2.0\temp\ACC_alardserver\adrundb.cmd" == "f:\Oracle\accdb\9.2.0\temp\ACC_alardserver\adrundb.cmd" (if not "runProcess_3" == "FALSE" (goto :runProcess_3 ) else (goto :runProcess_1 ) )
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_3"
"runProcess_3"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Start up the net8 listener
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>call f:\Oracle\accdb\9.2.0\appsutil\scripts\ACC_alardserver\addlnctl.cmd start ACC
ECHO is off.
ECHO is off.
19/05/2007 08:13
ECHO is off.
ECHO is off.
19/05/2007 08:13
ACC_alardserver.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : f:\Oracle\accdb\9.2.0
LOCAL : ACC
ORACLE_SID :
PATH : f:\Oracle\accdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;f:\Oracle\accdb\9.2.0\bin;f:\Oracle\accdb\9.2.0\jre\1.4.2\bin;f:\Oracle\accdb\9.2.0\jre\1.4.2\bin;E:\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;D:\VisualStudio\VC\bin;D:\VisualStudio\VC;D:\GNU;D:\GNU\make-3.81\WinRel;D:\GNU\make-3.81\WinDebug
LD_LIBRARY_PATH : f:\Oracle\accdb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"f:\Oracle\accdb\9.2.0\appsutil\log\ACC_alardserver\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process ACC ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 19-MAY-2007 08:13:39
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCACC))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=alardserver.alardserver.alard.net)(Port=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
32-bit Windows Error: 60: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 19-MAY-2007 08:14:01
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is f:\Oracle\accdb\9.2.0\network\admin\ACC_alardserver\listener.ora
Log messages written to f:\Oracle\accdb\9.2.0/network/admin\acc.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCACCipc)))
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=alardserver.alardserver.alard.net)(Port=1521))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
"Error returned while starting net8 listener"
There was an error while running the command - f:\Oracle\accdb\9.2.0\temp\ACC_alardserver\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 3
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for ACC instance
Database Availability Check
command : cmd.exe /c E:\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd f:\Oracle\accdb\9.2.0\ACC_alardserver.cmd sqlplus E:\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
E:\startCD\Disk1\rapidwiz>echo off
19/05/2007
08:14
ECHO is off.
ECHO is off.
19/05/2007 08:14
ACC_alardserver.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : f:\Oracle\accdb\9.2.0"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : f:\Oracle\accdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;f:\Oracle\accdb\9.2.0\bin;f:\Oracle\accdb\9.2.0\jre\1.4.2\bin;f:\Oracle\accdb\9.2.0\jre\1.4.2\bin;D:\Perl\site\bin;D:\Perl\bin;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;D:\VisualStudio\VC\bin;D:\VisualStudio\VC;D:\GNU;D:\GNU\make-3.81\WinRel;D:\GNU\make-3.81\WinDebug"
" LD_LIBRARY_PATH : f:\Oracle\accdb\9.2.0\lib"
SQL*Plus: Release 9.2.0.6.0 - Production on Sat May 19 08:14:09 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
connect test returning code 3
ERRORCODE = 3 ERRORCODE_END
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command : cmd.exe /c E:\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd f:\Oracle\accora\8.0.6\ACC_alardserver.cmd plus80 E:\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
E:\startCD\Disk1\rapidwiz>echo off
19/05/2007
08:14
"Cannot find environment file "f:\Oracle\accora\8.0.6\ACC_alardserver.cmd""
ERRORCODE = 0 ERRORCODE_END
Apps ORACLE_HOME connection test has succeeded
Environment File Check
Database ORACLE_HOME environment file passes instantiated variables test:
File = f:\Oracle\accdb\9.2.0\ACC_alardserver.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = f:\Oracle\accora\iAS\ACC_alardserver.cmd
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = f:\Oracle\accora\8.0.6\ACC_alardserver.cmd
RW-50016: Error: - APPL_TOP environment file was not created:
File = f:\Oracle\accappl\ACC_alardserver.cmd
RW-50016: Error: - ADOVARS environment file was not created:
File = f:\Oracle\accappl\admin\adovars.cmd
RW-50016: Error: - APPSCONFIG was not created:
File = f:\Oracle\accappl\admin\adconfig.txt
DBC File Check
RW-00023: Error: - DBC file was not created:
File = f:\Oracle\accappl\fnd\11.5.0\secure\ACC_alardserver\acc.dbc
HTTP Check
checking URL = http://alardserver.alardserver.alard.net:8000
Any help would be greatly appreciated.
Thanks
Alex
Message was edited by:
SparrowDCLXVII've downloaded 11i.10.2 from the edelivery site, and unzipped all files to E:, so
my staging area looks like E:\startCD, E:\oraDB, etc.You have to correct the set up of the stage area directory. The installation file system must contain a directory, Stage11i, in which the downloaded files will be unzipped. The file structure under that top-level directory will be automatically created when unzipping the files.
So, all what you need to do is the following:
- Create new directory E:\Stage11i
- Place all the zip files you have downloaded under this directory
- Unizip the files within this directory
By the end, you should have a directory structure similar to the following:
E:\Stage11i\startCD
E:\Stage11i\oraDB
E:\Stage11i\oraAppDB
E:\Stage11i\oraiAS
E:\Stage11i\oraApps
E:\Stage11i\oraNLS
Run Rapid Install from the Stage11i directory. -
Rapid Install cannot open a new window.
Hello all DBA Gurus,
I am trying to Install R12 on VM ware machine (linux , RHEL 4) , created the operating system users and setup the staging area.
When i run the rapidwiz from the command prompt I am getting the following error.
Could you please , help me fix this one.
Below is the text on the screen , during running rapid install.
===========================================
[root@db ~]# cd /u02/stage/startCD/Disk1/rapidwiz/
[root@db rapidwiz]# ./rapidwiz -restart
Rapid Install Wizard is validating your file system......
4 dvd labels found
Rapid Install Wizard will now launch the Java Interface.....
[root@db rapidwiz]# Rapid Install cannot open a new window.
java.lang.NullPointerException
at oracle.apps.ad.util.PortPool.parsePorts(PortPool.java:194)
at oracle.apps.ad.util.PortPool.<init>(PortPool.java:139)
at oracle.apps.ad.rapidwiz.ui.ExpressInstallPanel.<init>(ExpressInstallPanel.java:152)
at oracle.apps.ad.rapidwiz.RIWizard.<init>(RIWizard.java:489)
at oracle.apps.ad.rapidwiz.RIWizard.main(RIWizard.java:1449)
=============================================
Thanks,
Rizwan.Hi,
If the DISPLAY is set properly and you still get the same error, then I would suggest you download the latest RapidWiz version (Patch 7308107 - Rapid Install 12.0.4.9).
I am installaing it in a vm ware image by connecting an External HDD of 1 TB to a laptop with 2 GB RAM, do you advise me to try installing it on a desktop with higher configuration ? IT has close to 270 GB of free space.With this configuration, you should be to install 12.0.4 directly on the laptop.
For 12.0.4, the total space required for a standard system (not including the stage area) is 73 GB for a fresh install with a production database, and 161 GB for a fresh install with a Vision Demo database.
For the stage area, you need at least 33 GB to accommodate the file system and database files in the stage area.
Oracle Applications Installation Guide: Using Rapid Install - 12.0.4
http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf
Regards,
Hussein -
Error installing RAPID INSTALL R12 on Linux
I did a Rapid Install of Oracle Applications R12 (which contains 10g database) from the root user. After the installation, the system validates the configuration and it shows some problem with database availability. I have attached the log for database availability (bottom of this email), which shows the error "RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2"
Log for Database Availability :-
Database Availability
command: su oracle -c "/home/apps_rapid_install/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/oracle/VIS/db/tech_st/10.2.0/VIS_localhost.env APPS/APPS"
riwTDBup.sh started at Wed Sep 26 10:50:45 PDT 2007
Parameters passed are : /d01/oracle/VIS/db/tech_st/10.2.0/VIS_localhost.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/VIS/db/tech_st/10.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/oracle/VIS/db/tech_st/10.2.0/perl/bin:/d01/oracle/VIS/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle/VIS/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/home/apps_rapid_install/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/jre1.5.0_06/bin:/root/bin:/sbin:/usr/sbin:/usr/java/jre1.5.0_06/bin
LD_LIBRARY_PATH : /d01/oracle/VIS/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/VIS/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle/VIS/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle/VIS/db/tech_st/10.2.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: su applmgr -c "/home/apps_rapid_install/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/oracle/VIS/inst/apps/VIS_localhost/ora/10.1.2/VIS_localhost.env APPS/APPS"
riwTDBup.sh started at Wed Sep 26 10:50:47 PDT 2007
Parameters passed are : /d01/oracle/VIS/inst/apps/VIS_localhost/ora/10.1.2/VIS_localhost.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /d01/oracle/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/home/apps_rapid_install/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/jre1.5.0_06/bin:/root/bin:/sbin:/usr/sbin:/usr/java/jre1.5.0_06/bin
LD_LIBRARY_PATH : /d01/oracle/VIS/apps/tech_st/10.1.2/lib32:/d01/oracle/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
Executable : /d01/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
As the database is not available, the login page does not come up. It gives this error.
Login Page
checking URL = http://localhost.localdomain:8016/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
Even the Configuration Upload gives this error :-
Configuration Upload
uploading config file at /d01/oracle/VIS/db/tech_st/10.2.0/appsutil/conf_VIS.txt
Failed upload of config file at /d01/oracle/VIS/db/tech_st/10.2.0/appsutil/conf_VIS.txt
Can you please advice on where I could be going wrong. There was no error during the installation. It seems that some setups may be missing in the Linux Box.Hi Tom,
This excerpts the pre-upgrade patches MW recommends:
Patch 4685497...11i UPGRADE TO R12: OPTIONAL
PRE-UPGRADE PROGRAMS IN 11i Product: General Ledger
Patch 4676589...11i.ATG_PF.H.RUP4 Product:
Applications Technology Family
Patch 3438354...Patch 11i.ATG_PF.H Product:
Applications Technology Family
Patch 5120936...TUMS for R12: TO DELIVER TUMS UTILITY
FOR UPGRADES FROM 11i TO R12
Patch 4712852...Minipack 11i.AD.I.4 Product:
Applications DBA
Patch 4963569...CN UPGRADE - PRE-UPGRADE PATCH FOR
RELEASE 12.0 Product: Incentive Compensation
Patch 5382135...CSD R12 PRE-UPGRADE DATA VERIFICATION
PATCH UPDATE Product: Depot Repair
Patch 5259121...R12.FIN.A.UI.XB.3: ASM PRE/POST
DIAGNOSIS PROGRAM OUTPUT EDITS Product: General
Ledger
Patch 3649470...11i.10 Pre-Upgrade patch to find
carrier ship method inconsistencies Product: Shipping
Execution Common
Patch 3464936...AD.I NT PREREQ Product: Applications
DBA
Patch 5233248...SLA PRE-UPGRADE PROGRAM MODIFICATIONS
FOR 11i Product: Subledger Accounting.These are either optional pre-upgrade patches where you can control how much 11i data you migrate, or were included in the list of R12 upgrade patches provided.
And this excerpts the patches listed in 403339.1 Path C:
For all platforms:
* 4733582 - APPSPERF: AQ: UPGRADE SCRIPT
(A1001000.SQL) DELETES STATISTICS ON AQ TABLES. -
Product: RDBMS Server
* 4906594 - APPSST10201:ORA-39706 WHILE UPGRADE
FROM 8174 TO 10201 - Product: Oracle Intermedia
* 5567658 - ORACLE CONFIGURATION MANAGER UPDATE -
Product: Oracle Configuration Manager Family
* 5601428 - MLR BACKPORT FOR 5126270, 5238255 ON
TOP OF VERSION 10.2.0.2 - Product: RDBMS Server
* 4247037 - RFID-EPC GENERATION FEATURE FROM
DATABASE SERVER. TO BE USED WITH APPS WMS R12 -
Product: Spatial
* 4868804 - REGRESSION WHEN PATCH 4628170 IS
APPLIED TO 10.1.0.4 AND 10.2.0.1. ENV - Product:
RDBMS Server
* 4898580 - APPSST10G: UNABLE TO EXTRACT COMMENT
COLUMN DEFINITION ON A MVIEW - Product: RDBMS
Server
* 5005469 - NEED SCRIPT TO ASSIST WITH MIGRATION
FROM KOREAN_LEXER TO KOREAN_MORPH_LEXER - Product:
Oracle Text
* 5153209 - R12: AS10G: REHOST JRE 1.5.0_06 FOR
RDBMS ORACLE HOME 10.2.0.2 - Product: Techstack
* 5477912 - APPST:MEMORY LEAK ISSUE FOR R12 -
Product: RDBMS Server
* 5865568 UPDATE TO JVM TIME ZONE CLASSES NEEDED -
Product: Java/VM
or Linux and Unix only:
* 4380928 - APPSST102 : ALTER MATERIALIZED VIEW
LOG FAILS WITH ORA-03113 ERROR - Product: RDBMS
Server
* 4518443 - LISTENER GETS HUNG UP - Product:
Oracle Database Family
* 4592596 - APPSST102: ORA-01410 INVALID ROWID
WHEN SELECTING FROM A TABLE - Product: RDBMS Server
* 4639977 - APPSST102: ORA-00600: [KKQCBY: QBCFKKC
NOT ZERO], - Product: RDBMS Server
* 4643322 - APPSST: GETTING ERROR "ORA-22167"
WHILE DOING BULK UPDATE OPERATION - Product: RDBMS
Server
* 4686006 - QUERY ON VIEW WITH EXISTS AND HAVING
CLAUSE RAISES ORA-600 [KKQSALJG:NOBJS IS 0] -
Product: RDBMS Server
* 4689959 - DST RULE CHANGE IN US, NEED PATCHED
TIMEZONE FILES - Product: CORE
* 4744317 - SCMATGR12:D5 APPSST-XSLT TRANS FAILS
WHEN TAG CONTAINS '_' AT BEGINNING IN 10GR2 -
Product: XML Developers Kit
* 4751145 - ARRAYINDEXOUTOFBOUNDSEXCEPTION ON
QUERY EXECUTION WITH 10G JDBC - Product: JDBC
* 4932527 - CLIENT SIDE PLSQL CRASHES PASSING
RECORD PARAMETER TO STORED FUNCTION - Product: RDBMS
Server
* 4949257 - UNNESTED SUBQUERY RETURNS WRONG RESULT
- Product: RDBMS Server * 4966417
* 4967236 - APPSST10201:ORA 600[17282], WHILE
PERFORMING DATA IMPORT. R12 PROJECT - Product: XML
Developers Kit
* 5128946 - APPSPERF: RDBMS: MEMORY LEAK DUE TO
DDL REPARSE - Product: RDBMS Server
* 5150177 - APPSST: CREATE INTERMEDIA (TEXT)
INDEX ON 10G TAKES A LONG TIME - Product: Oracle
Text
* 5206570 - DUMP IN KSUSRS() WHEN SESSION FROM SQL
DEVELOPER IS SNIPED - Product: RDBMS Server
* 5254539 - INTERNAL ERROR CODE ON EXECUTING
HIERARCHICAL QUERY - Product: RDBMS Server
* 5434572 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5106909 4151363 - Product: RDBMS Server
* 5455623 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5392772 4759183 - Product: RDBMS Server
* 5460159 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 4417341 5092134 - Product: RDBMS Server
* 5548758 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5253806 5125886 5117856 - Product: RDBMS
Server
* 5718367 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5647056 5691091 5199213 - Product: RDBMS
Server
* 4450497 - UPGRADE 9.0.1.4.0 TO 10.1.0.4 RESULTS
IN SDO_INDEX_METADATA NULL FETCH - Product: Spatial
* 5066528 -
DBMS_TRACE.SET_PLSQL_TRACE(DBMS_TRACE.TRACE_ALL_EXCEP
IONS) ROWS - Product: PLSQL
* 5612127 - (Except HP-UX Itanium) THE OLAP C-
MINUS PATCH - Product: Oracle OLAPThese patches are required if you upgrade you 11.5.9 or higher 9i database to 10.2.0.2 in preparation for an R12 upgrade. You can do this and run 11i on 10.2.0.2 for some time before the R12 upgrade in order to split up your downtimes. When you install the R12 Upgrade Filesystem, the 10.2.0.2 Oracle Home includes all of these database patches already. After the database upgrade, you just need to run the manual steps from these patch readmes, which can be condensed down to the following:
cd $ORACLE_HOME/rdbms/admin
sqlplus “/as sysdba”
spool post_install.log
@?/rdbms/admin/catdph
@?/rdbms/admin/catdpb
@?/md/admin/catmgdidcode
@?/rdbms/admin/dbmsxmld.sql
@?/rdbms/admin/prvtxmld.plb
@?/rdbms/admin/dbmspbt.sql
@?/rdbms/admin/prvtpbt.plb
@?/rdbms/admin/tracetab.sql
@?/rdbms/admin/prvtaw.plb
@?/olap/admin/apsrelod.sql
@?/olap/admin/xoqrelod.sql
@?/olap/admin/amdpatch.sql
@?/rdbms/admin/utlrp.sql
cd $ORACLE_HOME/md/admin
alter session set current_schema=MDSYS;
@?/md/admin/prvtimd.plb
spool off
exit
cd ORACLE_HOME/javavm/lib/zi/
@fix5075470a.sql
shutdown immediate
startup
@fix5075470b.sql
Install OLAP and ODM for R12 Analytical Workspaces:
Install Oracle Data Mining and OLAP (conditional)
Verify that Oracle Data Mining and OLAP are installed in your database by using SQL*Plus to connect to the database as SYSDBA and running the following command:
SQL> select comp_id from dba_registry where comp_id='ODM' or comp_id='AMD';
If the query does not return ODM, then you do not have Oracle Data Mining installed. To install Data Mining, use SQL*Plus to connect to the database as SYSDBA and run the following command:
SQL> @$ORACLE_HOME/rdbms/admin/dminst.sql SYSAUX TEMP
If the query does not return AMD, then you do not have OLAP installed. To install OLAP, use SQL*Plus to connect to the database as SYSDBA and run the following command:
SQL> @$ORACLE_HOME/olap/admin/olap.sql SYSAUX TEMP -
Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic -
Rapid install gettin error when create control file
hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons -
Hello,
After install Netweaver 7 by the tool Rapid Install, i Want deploy the ERP 6.0 EhP 3.
During one step, the system check my configuration.
(serveur Windows 2K3 I386 32 bits with db Oracle 10).
I have the following error : "Prerequsit for Check Role pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.13.bp_folder/com.sap.pct.erp.mss.13.roles/com.sap.pct.erp.mss.manager_self_service
Please check the prerequisites!
Check if ERP Business Package is deployed
(role is missing : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.13.bp_folder/com.sap.pct.erp.mss.13.roles/com.sap.pct.erp.mss.manager_self_service)
Do you have an explication or solution to help me ?
Thanks a lot.Hi JACKY,
Please spell check your posts!
It appears that the business package for MSS has not been deployed.
Best Regards,
Matt -
Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Rayhttps://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4) -
I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard. When I run the Snow Leo install it errors saying I need OS 10.5 to run the install. How do I get around this? I've read that it's possible to go direcectly from 10.4 to 10.6.
To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088 -
I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
Beta cs6 will not install error bridge running but it is not running
Can not install cs6 error close bridge but bridge is not running
I am running windows 7, I check task manager and bridge is not running
Date: Mon, 26 Mar 2012 19:36:19 -0600
From: [email protected]
To: [email protected]
Subject: beta cs6 will not install error bridge running but it is not running
Re: beta cs6 will not install error bridge running but it is not running
created by Howard Pinsky in Photoshop CS6 - View the full discussion
Which operating system are you running? It might still be running in the background. You may want to check your Task Manager or Activity Monitor. Or better yet, if you feel uncomfortable with that, try logging out of your user account, then back in. That might kill any stray processes.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4293603#4293603
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4293603#4293603. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
How to transfer an iTunes library from an iPhone to a new Macbook Air
I just received a new macbook air and I would like to transfer the music from my iPhone to my new laptop. My old laptop that contained my itunes library is dead so I don't know how to get the music from my iPhone onto my new computer.
-
Why am I having problems charging my phone after upgrade to IOS 6?
I just updated my phone to the IOS system yesterday. Ever since I did that, my phone will not charge right! I keep getting an error saying my charger is not compatible with my phone anymore..but yet it was before the update? Any suggestions to fix th
-
Regarding equipment creation..
Hi Genius, Now I want some details about Equipment creation in PM module, and what r all the table comes... please send some link to learn equipment creation.
-
Best way to accomplish this configuration UC540
Hi there, Customer wants all calls to main DID to go to a prompt and automatically transfer to a blast group. Is there an easy way to do this minus BACD? Thanks! HelpDesk
-
Unregistering Non-Existant Computors
All I want to do is register this newly reformatted computer to sync music from my iPod into it, but I've already registered 5 computers. Problem is, 2 of those computers don't exist, one was this one until a virus took over, and the other one was an