Run time change # of radio button and boolean text

does Labview 8 support run time programmically change number of radio button and boolean text for each radio button?
Thanks,
DG

You can also customize a slide control to look like radio buttons. You can control the text labels and the number of element through a property (by changing the scale properties). If you really want it to look like radio buttons, you can try ripping the images from the dialog radio button. Also, to save some time, you can get the OpenG buttons package, which includes a slide customized to look like radio buttons. The main problem with this is that changing the number of items does not change the size of the control and that makes the dot filling the radio buttons look compressed.
Another option is to create an array of radio buttons, but then you will have to handle the logic yourself.
Try to take over the world!

Similar Messages

Radio button and show text

hello
i am assigned to create a page (index and action page) where
the index page has a group of radio buttons ( 4 of them) . if one
of the four the radio button is selected then a text (paragraph of
about 30 lines) is shown in the action page after a submitt button
or next button . can this be done????
if it can be done how and what is the code for it
thanks

display paragraph comes from???
i dont know yet. would it be better if
can i just store it on same page where the radio button is
declared?? then send it to the action page myactionpage.cfm
this is the example so if a radio button ( a combination of
radio button it will display in a page)
what will be displayed for every combination there will be a
paragraph.
for example if a radio button bob and camping then i will
show in the action page (for ex) "BOB had an exciting camping trip"
if bob and kickback is selected then the message on
myactionpage.cfm will say in text" bob Kickback and stayed home"
can this be done.
if so how
here is what my example:
<html>
<head>
<title>My sample Page</title>
</head>
<body>
<form name="myform" action="
http://www.myactionpage.com/
" method="POST">
<div align="center"><br>
<input type="radio" name="group1" value="bob">
bob<br>
<input type="radio" name="group1" value="ken" checked>
ken<br>
<input type="radio" name="group1" value="Carol"> Carol
<hr>
<input type="radio" name="group2" value="camping">
camping<br>
<input type="radio" name="group2" value=" riverrafting
"> riverrafting<br>
<input type="radio" name="group2" value="kickback"
checked> kickback<br>
</div>
</form>
</body>
</html>
<form name="myform" action=
http://www.myactionpage.com
method="POST">
<div align="center">
<br><input type="submit"
value="combinationofradiobuttons!"><br>
</div>
</form>
</body>
</html>

Adobe Captivate - Multiple Choice Quiz Question - Radio Button and Text Alignment

I have created a quiz with multiple choice questions.
No matter what I do I cannot align the radio button and the text for the choices (see below).
I would like to align the center of the radio button with the center of the letter A) and B).
I have tried every option that I can think of in the Properties options.
Please let me know if anyone has a solution for this.
Thank you

Thanks for the reply.
Previously I tried several different combinations of fonts and font sizes, but didn't see any change.
Does anyone else know of anything else that could effect this situation?

How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?

How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?
So this what I'm trying to do:
(     )   |TEXT FIELD|
(     )   |TEXT FIELD|
(     )   |                  |
(     )   |TEXT FIELD|
I have a radio button: (     )
and a text field: |TEXT FIELD|
The third text field is blank, and I would like for the radio button next to it greyed out (user can't click on it) since the text field is blank. Is this possible to achieve? I'm assuming I'll have to use javascript, but what would the code be and would it be entered in the javascript editor for the text field or the radio button?
Thanks in advance guys

Hey, thanks, but it didn't work
I have the text fields as read only. Could that be why it's not working? Should I make the fields not read only?
Thanks,

Radio buttons and Checkboxes to change appearance when selected

Hi guys!
Help needed.
I want my check boxes and radio buttons when selected to change color from black to "0,64,128", size from 12 to 14 and to become bold.
Also the default appearance for checkboxes is cross, but I need it to be a check mark.
I would be so much thankful if you could give me some advice.
THANK YOU!
Maria

Hi Bibhu,
Thanks for quick response!
For check mark -- thanks! How could I not see that option!
For radio button -- it's not working.
I found this helpful tips on changing appearance of the radio buttons and check boxes. http://www.assuredynamics.com/wp-content/uploads/2010/11/Assure-Dynamics-Checkboxes-and-Ra dio-Buttons-Rev-1.pdf
I used the first script, but I got an error message. I can't understand what I am doing wrong. It says: "Syntax error near token "{" on line 2, column 1.
I am confused.
Help appreciated.

Radio Buttons and Event Structures

Guys, I am hoping for some help here on something I probably should know but cant figure out how to do. I am using a set of radio buttons and an event structure to run a UI. The radio buttons are acting as both a user input and indicator of current status selected by the user. I have the event structure set to run on value change of the radio button. All works great unless the operator decides that he wants to repeat the selection that the radio button is already set to. The event structure does not recognize this as a change of value and will not execute. Is there a way to set the event structure up to run even if the same selection of the radio button is made a second time? I attached a crude example to this post. Basically everytime I press the button, I want an entry made into the text box, regardless if the selected item was already pressed. Any thoughts.
Troy
Attachments:
Radio Button Test.vi ‏16 KB

Instead of hacking around the inherent nature of radio buttons, why not just use a Cluster? Its behavior in the UI is more customizable. Check this out:
I just replaced your radio buttons with a cluster, and added a little logic to the event structure to get it to behave the way you describe. I've attached the VI below, saved in 8.2, if you want to try it out.
Hope this helps,
-D
Message Edited by Darren on 11-07-2006 10:45 AM
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
cluster_buttons.png ‏7 KB
Cluster Test.vi ‏17 KB

What is the difference between "System" buttons and boolean buttons?

I'm writing a VI with an event structure that allows me to push different buttons to control external instruments, but I found two types of buttons worked: "System" buttons and "Boolean" buttons. On the surface, the functionality seems the same: I can write the VI so that either one works, and they work in the same way, but which one is right?
Here is a little more info on what I'm doing. I have a case structure that has one "timeout" case, which just measures the position of a movable stage. Another case, if a "system"-type button is pressed, moves the stage to an absolute position. Another case activated by a "boolean"-type button moves the stage to the zero point. I could switch these and it would still work, but I don't understand how the buttons are different.
Also, right now I'm using the "run continuously" function so that the loop just repeats. Is this the right way to do it? I could put everything inside a loop, and make my own stop button for it. Would that be better? Worse? --> I think I found the answer to my own question: run continuously will stop and start the code at each instance, so a while loop will be better because it doesn't start and stop repeatedly. (True?)
Thanks,
Karl
Message Edited by Karl T. on 03-31-2008 05:43 PM

Karl,
You never want to design your program to have to use the run continuously button. It is more for debugging than anything else. Using a while loop with your own stop button is the preferred method of doing things.
The System, 3-D, and Classic Booleans all basically work the same. The appearance is different. The System buttons look like your OS buttons that you see on all your other programs. The 3-D were introduced in LV6 and remain standard across different OS's and are not affected by System color changes or System theme changes. The classics behave similarly to the 3-D, but they are the older controls that existed prior to LV6 and have been kept for legacy's sake.
There are arguments for using system controls vs. 3-D controls (I don't think most people use the classic controls much anymore). So, you really have to make a personal decision as to which you prefer to use. NI pushes the system controls, but you'll notice there is a large number of controls which are not available in the system pallette. I have made versions that look like system controls, but they do not automatically update for theme or system color changes.

How to create popup window with radio buttons and a input field

Hi Guys,
Can somebody give some directions to create a stand alone program to create a window popup with 2 radio button and an input field for getting text value. I need to update the text value in a custom table.
I will call this stand alone program from an user exit.
Please give me the guidance how go about it or please give any tutorial you have.
Thanks,
Mini

Hi,
There are multiple aspects of your requirements. So let's take them one at a time.
You can achieve it in the report program or you can use a combination of the both along.
You can create a standalone report program using the ABAP Editor (SE38). In the report program you can call the SAP Module pool program by CALL Screen <screen number>. And then in the module pool program you an create a subscreen and can handle the window popup with 2 radio button and an input field for getting the text.
For help - Module Pool programs you can search in ABAP Editor with DEMODYNPRO* and you will ge the entire demo code for all dialog related code.
For Report and other Module pool help you can have a look at the following:
http://help.sap.com/saphelp_nw70/helpdata/en/47/a1ff9b8d0c0986e10000000a42189c/frameset.htm
Hope this helps. Let me know if you need any more details.
Thanks,
Samantak.

Radio button and group

Hi All,
Not quite follow what dev guide says about radio button and group implementation.
I tried but always got strange behavior.
I have a subtab with two radio buttons (rbt1 and rbt2)
rbt1 property defined as:
Initial Value: Y
Checked Value: Y
Unchecked Value: N
rbt2 property defined as:
Initial Value: Y
Checked Value: N
Unchecked Value: Y
Also, In my subtab PR, I init these two bts as a group:
OAMessageRadioButtonBean colButton1 =
(OAMessageRadioButtonBean)webBean.findChildRecursive("rbt1");
colButton1.setName("colGroup");
colButton1.setSelectedValue("Y");
OAMessageRadioButtonBean colButton2 =
(OAMessageRadioButtonBean)webBean.findChildRecursive("rbt2");
colButton2.setName("colGroup");
colButton2.setSelectedValue("N");
When the subtab render first time, rbt1 is checked and rbt2 is unchecked as expected. but when I go to other subtab then come back, the rbt1 is unchecked and rbt2 is checked (switch automatically).
The subtab PR is the only place I set this radio button value and group as showing above. Somewhere wrong with my logic or setting?
Regards,
KJ

Hi All,
Got issue resolved. When I was replying Ranjit previous post, I mentioned both of buttons bind to same VO attribute. Since the first rbt1 has defined checked and unchecked values (Y & N) and both of buttons are defined in same group, so I took off second rbt2 attribute binding then it works (won't switch automatically anymore).
I still defined init values for both of buttons and also removed setSelectedValue() method calls from PR.
Thanks again for the great helping.
KJ

Acrobat 9.1 Mac How do you change from Radio buttons to Check boxes?

I have a DMV Form I Downloaded and had to convert to PS then back to PDF (written originally on PC Acrobat was in XML format).
So on new form, I am able to add fields. I used the the Forms manager to automatically create the fields. Fields that were made Radio Buttons should have been Check boxes. How do change the Radio buttons to check boxes. There are a lot of them and I don't wish to have to re-key them in.
Suggestions?

Well when I click on the box it shows a Check mark in the box. That exactly what I need because in the instructions it requires a Check mark in each of the check boxes. Normally the Med form is sent as a paper copy from DMV every two years.
Also another Tip. A PDF that has XML Content. (PC Acrobat Version).
If you want a usable PDF on Mac and get rid of the XML do the following:
Open the XML Based PDF on Mac Acrobat 9.X .
Now choose export and save as Postscript File (.ps).
Now locate and drop on Distiller 9.X.
When PDF created will be a Pristine exact replica of the XML file except Mac Acrobat can edit and create forms with it.

Please help! How can I validate Radio Buttons and List Menu with PHP.

Hello everyone, I have been learning PHP step by step and
making little projects.
The point is I find it easy to learn by doing "practical
projects."
I have been reading the David Powers's Book on PHP Solutions
and it's really great, however there is nothing mentioned regarding
Validating Radio buttons. I know the book cannot cover every aspect
of PHP and maybe someone in here can help.
I have been learning how to process HTML forms with PHP.
The problem is every book or tutorial I have read or
encountered fall short on validation.
I'm wondering how I can learn to validate Radio Buttons and
Select List Menu.
I have managed to create validation for all other fields but
have no clue as to how I can get validation for Radio Buttons and
List Menu.
I would also like an error message echoed when the user does
not click a button or make a selection and try to submit the form.
I would appreciate any help.
Patrick

It's not that default value is "None." In fact it's not. It
will only be
"none" when the form is submitted.
Also if your submit button is names 'send' then
$_POST['send'] will only be
set if the form was submitted.
Make sure you didn't hit the refresh button on your browser
which usually
reposts the information. Also make sure you did not reach the
form from
another form with the same button names.
Otherwise paste the snippet.
Also you can check what fields are set in the post array by
adding this to
the top of (or anywhere on) your page:
print_r($_POST);
Cosmo
"Webethics" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Off the top of my head this should be no different than
your radio buttons
> except that 'productSelection' will always fail the
!isset check when the
> form is submitted since the default value is "None", and
therefore always
> set. :-)
>
> So how about this..?
> <?php
> if (isset($_POST['send']) and
($_POST['productSelection'] == "None"))
> {echo "Please select a product.";}
> ?>
>
>
>
>
> "Webethics" <[email protected]> wrote
in message
> news:[email protected]...
> > Another question - how do i applied the code you
just showed me to
> > select
> > menu
> > or select list?
> >
> > This is the list:
> >
> > <div class="problemProduct">
> > <label for="productSelection"><span
class="product_label">Product
> > Name.</span></label>
> > <select name="productSelection" id="products"
class="selection">
> > <option value="None">-------------Select a
product----------</option>
> > <option value="Everex DVD Burner">Everex DVD
Burner</option>
> > <option value="Vidia DVD Burner">Vidia DVD
Burner</option>
> > <option value="Excerion Super Drive">Excerion
Super Drive</option>
> > <option value="Maxille Optical Multi
Burner">Maxille Optical Multi
> > Burner</option>
> > <option value="Pavilion HD Drives">Pavilion
HD Drives</option>
> > </select>
> > </div>
> >
> > I thought I could just change the name is the code
from operatingSystem
> > to
> > productSelection.
> >
> > Something like this:
> >
> > From this:
> >
> > <?php
> > if (isset($_POST[send]) and
!isset($_POST['operatingSystem']))
> > {echo "Please select an operating system.";}
> > ?>
> >
> > To this:
> >
> > <?php
> > if (isset($_POST[send]) and
!isset($_POST['productSelection']))
> > {echo "Please select an operating system.";}
> > ?>
> >
> > But this does not work, any ideas?
> >
> > Patrick
> >
>
>
>
>
> Hey, I tried this about but as you mentioned, since the
default product
> value
> is "None" an error message appears when the page loads.
>
> Is there a way to code this things so that even though
the default value
> is
> "None" there ia no error message untle you hit the
submit?
>
> When I applied the code, it messes up the previous code,
now the operating
> system is requiring an entry on page load.
>
> When I remove the code from the list menu everything
goes back to normal.
>
> I know this is a little much but I have no other
alternatives.
>
> Patrick
>

Check boxes, Radio Buttons, and XML Field Order

I am working with Adobe Designer Version 7.0. Hopefully this forum can still address my issues.
I am creating a registration form that will often be submitted via email to us for processing. To help make the data both easy to transfer for us into our excel file and to minimize the errors made by the people using the form, I need the form to be able to do a couple of things that I am having a hard time figuring out. My questions are the following:
I have a list of 7 check boxes that each insert a dollar value into a seperate numeric field on the form. Each check box has a unique dollar value associated with it. Is there any way to design the form so the user can only choose one of the check boxes? I tried using radio buttons in a group, but if a user mistakenly chose the wrong radio button and then selected another button from that group, it would add to the total in the Application Fee field and not subtract out the previous amount. Below is the code i used for one of the check boxes.
I have two numeric fields that the user must choose one or the other. Can I design those two fields (numHomes and numBuildings) so that if the you enter a value for one field, you cannot enter a value for the other field? Both fields are then calcuated in a seperate numeric field. Below is the code i used for the numeric field.
I want to be able to take the data emailed to us as an XML file when a user submits the results via email and directly paste it into our Excel file. To keep the cut and paste process simple, I want to make sure the order of the XML fields matches the order of the database fields so it can be done in one shot. Do you know how to organize the XML fields? They do not seem to correspond to the ordering found under the Hierarchy tab. Any thoughts on this?
Thanks
if (this.rawValue == 1) then
numAppFee.rawValue = numAppFee.rawValue + 350;
else
numAppFee.rawValue = numAppFee.rawValue - 350;
endif
numHomes * 50 + numBuildings * 100 + numDups * 10

Create an XML Schema (XSD) and define that as the default form schema. The form data will conforms to the order of fields defined in the XML schema.
Hope that helps.
Nith

Dynamic radio button and group

Hi, we have create dynamic radio button and group on “application creation complete” event , but which I am try to get number of radio button its show zero, see below code
import flash.utils.setTimeout;
import mx.controls.Alert;
import mx.events.FlexEvent;
import spark.components.RadioButton;
import spark.components.RadioButtonGroup;
private var rbg:RadioButtonGroup;
private var rb1:RadioButton;
private var rb2:RadioButton;
private var dcount:int = 0;
protected function application1_creationCompleteHandler(event:FlexEvent):void
     // TODO Auto-generated method stub
     // TODO Auto-generated method stub
     rb1 = new RadioButton();
     rb2 = new RadioButton();
     rbg = new RadioButtonGroup();
     rb1.label = "Radio1";
     rb2.label = "Radio2";
     rb1.group = rbg;
     rb2.group = rbg;
     vbox1.addChild(rb1);
     vbox1.addChild(rb2);
     checkRadioButton ();
protected function checkRadioButton ():void
     Alert.show("In checkRadioButton function : " + rb1.group.numRadioButtons.toString());
If I put some Time interval to call checkRadioButton function its working fine,
//checkRadioButton ();
setTimeout(checkRadioButton,1000);
but this is not best practice.
why this happen ….can anybody clear this or any other way to do this.
Thanks in advance

@manjeet.patel,
Just write the below line of code
vbox1.validateNow();
You need not use setTimeout() function
vbox1.addChild(rb1);
vbox1.addChild(rb2);
vbox1.validateNow();
Thanks,
Bhasker

Save Status of Radio Buttons and Variables

I designed a form that uses a Raddio Button with three choices. These choices selectibles enable/disable areas of the form. The user will save the form with a different name for archival. Right now if I save the form, the status of the Radio Button and variables used in the JS code are not stored. So if I open the saved file, the form will not reflect the original status of Radio Button and variables.
What's the best way to implement this?
Can I save the status of the Radio Button (choice selected) and variables when the user saves the form and then restore them when opened back?
Thank you.

Without knowing more about what you're doing, it's hard to give specific information. I'm not sure what you mean about the status of the radio buttons since when a form is saved, their state won't change when it's reopened. For saving data, you certainly could use a hidden field and read it in using a script that executes when the form is opened.

Radio button and associated functionality is not working!

Hi Pros,
I am facing the following problem:
1.I have an interactive PDF created in Acrobat 9 Pro.
2.PDF have few radio buttons, each radio buttons ahave assigned valus(eg: 1,2,3 etc)
3.I have a text box in which the value of selected radio button is displayed.
4.PDF is working fine on my machine.
5.Client is having Internet Explorer version 7.0.5 and Adobe reader:8.2.6
6.The radio buttons and associated functionality is not working on client's machine.
7.The text box shows '0' even if we a radio button with value 2 or 1 is selected.
What will be the problem? How can I fix this issue?
Please help.

Thanks alot for helping me on this.
Thanks to u also ~graffiti

Run time change # of radio button and boolean text

Similar Messages

Maybe you are looking for