Run time data types

Hello every body,
i want to create a run time data type CHAR_10
IS THERE ANY WAAY like
create data dataref type ('C').
this statement creates a data reference of type C
but can i specify CHAR_10
create data dataref type ('CHAR_10')??????

Hi,
Try using the field-symbols..
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: V_CHAR(10) VALUE 'TEST'.
ASSIGN V_CHAR TO <FS>.
WRITE: / <FS>.
Thanks,
Naren
Thanks,
Naren

Similar Messages

Which is the best alignment for a Date-time data type (WPF)

Hello,
sorry If I'm asking this question in the wrong place (If you could help me where to ask it :) )
I have read the Microsoft guidelines for Layout. Left and right alignment are briefly described... but I don't see anything for Date/Time data type? What is the best alignment for this type of data?
Can you tell me where I can find the relevant information? Microsoft guidelines or other?
We are using WPF.
Thank you very much :)

Welcome to the discussion area!
+1) Will using the TC on a wireless network as a repeater half my connection speed while doubling my coverage?? In that case it might be worth it..+
Unfortunately, the Time Capsule will only "extend" a wireless network if the network has been created by another Apple "n" router. So the Netgear would not be compatible with the Time Capsule for this purpose.
If you could connect the Netgear and Time Capsule together using an ethernet cable, you would be able to create one large wireless network.
+2) Do I have any reason to believe I could get better coverage using the TC as the Base Station and trying to virtually impossible task of setting up the Netgear as a bridge?+
Not sure about "better coverage", but the Time Capsule would create dual band networks operating at both 5 GHz and 2.4 GHz so faster devices could connect at 5 GHz for maximum speed and slower devices would connect to the 2.4 GHz band.
In addition, if the Time Capsule connects directly to your cable modem, you could enable the "guest" network feature if you needed that function. (However, if the Time Capsule is configured in the network as a "bridge", the guest network feature cannot be enabled).
On a quick glance, your Netgear router does not appear to be a simultaneous dual band device. If that's the case, you could configure it to expand either the 2.4 GHz band or 5 GHz band (assuming it will handle 5 GHz) for wider wireless coverage. But, the connection between devices would need to be via ethernet cable, and as you point out, the Netgear would need to configured as a "bridge" in this type of setup.
If running the ethernet cable is simply not possible, take a look at a pair of ethernet powerline adapters to accomplish the same task using the AC wiring in your home to transmit the ethernet signal. While not as good as a straight ethernet cable, this type of connection would still yield better performance than wireless only, if the devices were compatible.

How to change at run-time the type of a step?

Hi,
How topic title, i need to know how change at run-time the type of a step. I have, i my sub-sequence, a step whose type must change at run-time based upon the occurrence of a condition. How can do it?
Thanks.

I need to do this: At verify of a condition, one specific step at the end of sequence must change from statement to numeric limit test and viceversa.
However, is right to no writing self-modifyinf sequence unless handle rece condition on step that i want change at run-time.
Moreover i ask myself: If for change the type of a step i need first delete the substep and later create a new one relative to the step that I want, then it is better and make more sense to create dynamically the step that i would like to have depending on the condition that occurs, right?
Thanks

UNDERSTAND THE NEW DATE AND TIME DATA TYPES IN ORACLE 9I

제품 : SQL*PLUS
작성날짜 : 2001-08-01
UNDERSTAND THE NEW DATE AND TIME DATA TYPES IN ORACLE 9I
========================================================
PURPOSE
Oracle 9i 에서 소개되는 새로운 datetime data type 에 대해 소개한다.
Explanation
Example
1. Datetime Datatypes
1) TIMESTAMP
: YEAR/MONTH/DAY/HOUR/MINUTE/SECOND
2) TIMESTAMP WITH TIME ZONE
: YEAR/MONTH/DAY/HOUR/MINUTE/SECOND/
TIMEZONE_HOUR/TIMEZONE_MINUTE( +09:00 )
or TIMEZONE_REGION( Asia/Seoul )
3) TIMESTAMP WITH LOCAL TIME ZONE
: YEAR/MONTH/DAY/HOUR/MINUTE/SECOND
4) TIME WITH TIME ZONE
: HOUR/MINUTE/SECOND/TIMEZONE_HOUR/TIMEZONE_MINUTE
2. Datetime Fields
1) YEAR/MONTH/DAY/HOUR/MINUTE
2) SECOND(00 to 59.9(N) is precision) : Range 0 to 9, default is 6
3) TIMEZONE_HOUR : -12 to 13
4) TIMEZONE_MINUTE : 00 to 59
5) TIMEZONE_REGION : Listed in v$timezone_names
3. DATE 와 TIMESTAMP 와의 차이점
SQL> select hiredate from emp;
HIREDATE
17-DEC-80
20-FEB-81
SQL> alter table employees modify hiredate timestamp;
SQL> select hiredate from employees;
HIREDATE
17-DEC-80 12.00.00.000000 AM
20-FEB-81 12.00.00.000000 AM
단, 해당 Column 에 Data 가 있다면 DATE/TIMESTAMP -> TIMESTAMP WITH
TIME ZONE 으로 Convert 할 수 없다.
SQL> alter table employees modify hiredate timestamp with time zone;
alter table employees modify hiredate timestamp with time zone
ERROR at line 1:
ORA-01439: column to be modified must be empty to change datatype
4. TIMESTAMP WITH TIME ZONE Datatype
TIMESTAMP '2001-05-24 10:00:00 +09:00'
TIMESTAMP '2001-05-24 10:00:00 Asia/Seoul'
TIMESTAMP '2001-05-24 10:00:00 KST'
5. TIMESTAMP WITH LOCAL TIME ZONE Datatype
SQL> create table date_tab (date_col TIMESTAMP WITH LOCAL TIME ZONE);
SQL> insert into date_tab values ('15-NOV-00 09:34:28 AM');
SQL> select * from date_tab;
DATE_COL
15-NOV-00 09.34.28.000000 AM
SQL> alter session set TIME_ZONE = 'EUROPE/LONDON';
SQL> select * from date_tab;
DATE_COL
15-NOV-00 12.34.28.000000 AM
6. INTERVAL Datatypes
1) INTERVAL YEAR(year_precision) TO MONTH
: YEAR/MONTH
: Year_precision default value is 2
SQL> create table orders (warranty interval year to month);
SQL> insert into orders values ('2-6');
SQL> select warranty from orders;
WARRANTY
+02-06
2) INTERVAL DAY (day_precision) TO SECOND (fractional_seconds_precision)
: DAY/HOUR/MINUTE/SECOND
: Logon time 확인시 주로 사용
: day_precision range 0 to 9, default is 2
SQL> create table orders (warranty interval day(2) to second);
SQL> insert into orders values ('90 00:00:00');
SQL> select warranty from orders;
WARRANTY
+90 00:00:00.000000
7. Interval Fields
- YEAR : Any positive or negative integer
- MONTH : 00 to 11
- DAY : Any positive or negative integer
- HOUR : 00 to 23
- MINUTE : 00 to 59
- SECOND : 00 to 59.9(N) where 9(N) is precision
8. Using Time Zones
1) Database operation
- Defined at CREATE DATABASE
- Can be altered with ALTER DATABASE
- Current value given by DBTIMEZONE
2) Session operation
- Defined with environment variable ORA_SDTZ
- Can be altered with ALTER SESSION SET TIME_ZONE
- Current value given by SESSIONTIMEZONE
3) TIMESTAMP WITH LOCAL TIMEZONE
- TIME_ZONE Session parameter
: O/S Local Time Zone
Alter session set time_zone = '-05:00';
: An absolute offset
Alter session set time_zone = dbtimezone;
: Database time zone
Alter session set time_zone = local;
: A named region
Alter session set time_zone = 'America/New_York';
Reference Document
------------------

Hi ,
I am facing the same problem and my scenario is also same (BAPI's).
So can you please tell me how you overcome this problem .
Thanks,
Rahul

Run time data of ME21N

Hello People,
I need to check whether the user has inputted the print parameters in message box of me23n.
where do i get these print data on run time.
thanks in advance.
regards,
roshan.

Sorry, None of them exists...
is there any Fm which gives run time data?
regards,
roshan.

Run time data binding via FormCalc/JavaScript+wrong text formating

Hello Everybody
I need to print a text block with company details depending on company code (different details for different codes). I tried to use this code for event "calculate":
if ($record.LS_HEADER.BUKRS == "1000") then
$ = $record.COMP_DETAILS_1000
elseif ($record.LS_HEADER.BUKRS == "1000") then
$ = $record.COMP_DETAILS_2000
endif
$record.COMP_DETAILS_1000, $record.COMP_DETAILS_2000 are elements from the form context which are linked to textmodules.
This code works and it prints correct textmodules for different company codes. But the printed text is not formated like text in the textmodules. The most important thing here is that these texts are always printed as a single long string and I need paragraphs like in the textmodules. It's a problem... If I use a statical binding (without FormCalc programming) the text modules will be printed with correct formating.
Using of checkbox "Allow Multiline Lines" hasn't helped here...
Have you any idea how should I do the run time data binding?
Thank you very much in advance!

Hello,
the important part is "If I use a statical binding (without FormCalc programming) the text modules will be printed with correct formating." That means you can get the text in the shape you want. Just do that. Get all the texts. Next use the JS/FC scripting to hide all but one text. You get only one text to display and you use static binding to get the proper text format.
Hope this helps, Otto

Run time data source credentials in SUP

Hi Experts,
I am trying to use run time data source credentials for a custom application which I developed for iphone. But during run time I get JCO error - Incorrect username/password. However if I use normal static connections then I am able to fetch data.
Has anyone encountered similar issue with SUP ?
Regards,
Victor

I can be wrong, but I will try to help you.
Did you get this problem when you are trying to deploy the MBO?
IF yes make sure that you are using same user/pass that you use in the back-end, usually the application uses the sup credencial {supAdmin/s3pAdmin}. You can use the openDS to create a new user <SUPInstall>.....\openDS\bat\control-panel.bat after you create a new user, and when you login in, user will be automatic linked to the device.
and check if you have the latest JCO connector [dll's and jar's] placed in the right place.
I hope I helped you.

SQL connection string reader Date time data type format

I am using below script to fetch data fields from DB. Script runs fine but at the end receiving following error as
Exception calling "GetDateTime" with "1" argument(s): "Specified cast is not valid."
At line:6 char:36
+ $termdate = $reader.GetDateTime <<<< (23)
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
$sqlconstr = 'Data Source=Server;Initial Catalog=DB;User ID=User;pwd=$XXXX;'
$sqlconn = New-Object system.Data.SqlClient.SqlConnection
$sqlconn.connectionstring = $sqlconstr
$sqlconn.open()
$sqlquery1 = "SELECT * from TERMDB"
$SqlCmd = New-Object System.Data.SqlClient.SqlCommand ($sqlquery1,$SqlConn)
$reader=$sqlcmd.ExecuteReader()
while ($reader.read())
$emp = $reader.GetString(0)
$fn = $reader.GetString(3)
$ln = $reader.GetString(5)
$termdate = $reader.GetDate(24)
"$emp,$fn,$ln,$termdate" | out-file -FilePath "C:\testing1.txt" –append
$sqlconn.close()
Please help with the data type required for Date time.

Thanks.
When i run syntax i gets below error.
$conn = New-Object system.Data.SqlClient.SqlConnection
$conn.connectionstring='Data Source=Server;Initial Catalog=DB;User ID=User;pwd=$XXXX;'
$conn.open()
PS X:\> $cmd=$conn.CreateCommmand()
Method invocation failed because [System.Data.SqlClient.SqlConnection] doesn't contain a method named 'CreateCommmand'.
At line:1 char:26
+ $cmd=$conn.CreateCommmand <<<< ()
+ CategoryInfo : InvalidOperation: (CreateCommmand:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFound
I will mark it as Answered & open new thread for AD cmdlet.

Convert Data type from Oracle Data time string to SQL Date time data type

I have a time stamp column pulled from oracle into a SQL server db table varchar datatype column.
Now i want to change that column to date time.
Following is the data present in the table:
01-APR-11 02.15.00.026000 AM -08:00
01-APR-11 04.15.00.399000 AM -08:00
01-APR-11 06.15.00.039000 AM -08:00
I want to convert this data into sql server datetime data type.
Please advice.
Thanks,
Sam.
I am unable to find the solution in other sites which is why I have posted it in Oracle forum for seeking solution.
Thanks in Advance.
Sam.

Sam,
How are you actually loading the data into SQL*Server - are you using something like an Oracle gateway, BCP or another Microsoft utility of some sort ?
If you are using an Oracle problem then we may be able to help but if using a Microsoft utility then you should really follow up with Microsoft to know what format the data should be in to use a Microsoft utility.
Regards,
Mike

Time Data Type

Hi,
I am using Oracle Database 11.2.1. I have created a new column on a table to store just the time element in format (HH24:MI:SS) and selected data type 'TIMESTAMP' but I get the following error when inserting a record:
insert into t values('08:45:00');
ORA-01843: not a valid month
Does the session need to be altered or a different data type required?
Thanks

You have to make it date type value by using to_date. like:-
SQL> drop table t;
Table dropped.
SQL> create table t (col date);
Table created.
SQL> insert into t values(to_date('08:45:00','HH24:MI:SS'));
1 row created.
SQL> select * from t;
COL
01-JUL-13
SQL> select to_char(col,'HH24:MI:SS') res from t;
RES
08:45:00
{OR}
SQL> alter session set nls_date_format = 'HH24:MI:SS';
Session altered.
SQL> select col from t;
COL
08:45:00
SQL>
NB:- No need of creating TIMESTAMP datatype column, DATE type column can store HH24:MI:SS format information.

Time Data Type when Exporting to Excel

Hello,
I have a report I wrote using crystal reports XI. There is a datetime field which I converted to a time field through the use of a formula and the time function. When I right click on the field and view the data type it says time.
However, when I export to excel the field comes up as a custom field. How do I get it so that the exported field will appear as a time field in excel?
Thank you for your help.

>
Vitaly Izmaylov wrote:
> As far as I know, Crystal Reports does not export field type - only data.
>
> MS Excel defines the type by reviewing first top records and there is a knowledge base article on Microsoft website on this subject.
>
> Could you please give us an example how your time fields look like in Crystal Reports?
The time looks like this:
21:38
10:53
00:14
Thanks,
Athalia

TIMS DATA TYPE

Hi friends
i want to import some current time to one function module...(only time : the format is (HH:MM:SS)..
for this i want to declare a variable.. for this what type od data type can i use..
ex: DATA : ctime TYPE I or ?
regards
Babu

Hi,
Declare a variable
DATA: curr_time(6) type c.
Get current time into the variable by passing sy-uzeit to the variable i.e.
curr_time = sy-uzeit.

For further processing of time in HRS,MIN $ Sec format, you can use offset concept with the variable curr_time.
*Always reward points for useful answers
Regards,
Amit

Accessing the run time data of processed output types in VA02

Hello All,
I have to write a code to make entriesin the Ztable when the user processes the output tpe in the VA02 transaction. How I can know that user has attached a new output type for that order?
I am writing my code at the save button of the VA02 tcode in the exit: userexit_save_document.
I checked for the Xnast, ynast, inast entries. But none of them store the current data of the processing of output types screens.
Please help.,
Thanks in advance
Rgds,
Madhuri

data :it_xnast like vnast OCCURS 20 WITH HEADER LINE,
 it_x1nast like vnast OCCURS 20 WITH HEADER LINE.
field-symbols :
 <Fs1> type ZSDTT_VNAST,<Fs2> type ZSDTT_VNAST .
data: wa_xnast type vnast, wa_x1nast type vnast.
 assign ('(SAPLV61B)XNAST[]') TO <fs2>.
 assign ('(SAPLV61B)VNAST[]') TO <fs1>.

Date and Time data types

I've read that there are limitations with EJB QL queries when dealing with Date and Time objects. Specifically, Ive read that its recommended that longs (milliseconds) should be used in EJB QL queries instead of java.sql.Date and java.sql.Time. Ive also read that, in the where clause, the operators >= and <= cant be used when comparing date or time objects. Is this accurate?
If the first limitation is true, then does the date and time fields have to be represented as longs in the entity beans? and do the mapped columns (in the tables) have to be of numeric types for successfull synchronization?
When using longs for dates and times, can the >= and <= operators be used in the where clause?

Hi ,
I am facing the same problem and my scenario is also same (BAPI's).
So can you please tell me how you overcome this problem .
Thanks,
Rahul

UPDATE SQL query using WHERE and a date/time data type... Multiple changes...

I'm using the LabView Database Connectivity Toolset and am using the following query...
UPDATE IndexStation
SET Signal_Size=200
WHERE 'StartTime=12:05:23'
Now the problem is that this command seems to update all rows in the table IndexStation... Not just specifically the row where StartTime=12:05:23
I have tries all sorts of {} [] / ' " around certain characters and column names but it always seems to update all rows...
I've begun to use the SQL query tab in Access to try and narrow down as to why this happens, but no luck!
Any ideas!?
Thanks,
Chris.

Chris Walter wrote:
I completely agree about the Microsoft issue.
But it seems no SQL based manual states that { } will provide a Date/Time constant.
Is this an NI only implementation? Because I can't seem to get it to function correctly within LabView or in any SQL query.
Chris.
There is nothing about the database toolkit in terms of SQL syntax that would be NI specific. The database Toolkit simply interfaces to MS ADO/DAO and the actual SQL syntax is usually implemented in the database driver or database itself although I wouldn't be surprised if ADO/DAO does at times munch a bit with that too.
The Database Toolkit definitely does not. So this might be a documentation error indeed. My understanding of SQL syntax is in fact rather limited so not sure which databases might use what delimiters to format date/time values. I know that SQL Server is rather tricky thanks to MS catering for the local date/time format in all their tools and the so called universal date/time format has borked on me on several occasions.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Run time data types

Similar Messages

Maybe you are looking for