Run time eroor for customer report after upgrade DYNP_TOO_MANY_RADIOBUTTONS

Hi friends,
I am getting runtime error after upgrade of our systems from sap 4.7 to ECC 6.0.There is a report which has three radio butons,in which third radio button is set as default .there are 5 variants for the report.If select any variant which selects the second radio button.Getting runtime error.
The error is DYNP_TOO_MANY_RADIOBUTTONS_ON.
Thanks & Reghards,
Manoj

Might be case two buttons are set on at single time....
see this:
handle the exception on radibutton.
DYNP_TOO_MANY_RADIOBUTTONS_ON

Similar Messages

'CONVT_NO_NUMBER' run time error in custom program of upgraded ECC system.

Hi,
I am getting a run time error in custom program and st22 shows 'CONVT_NO_NUMBER' as the cause.
We have just upgraded system to ECC6 and with 4.7 we were not getting this error.
Can you please let me know if there is any SAP note to address this ?
Thanks,
Avinash

Hi Avinash,
Please see the below link for Sap Notes:
[Program is giving a Short Dump u201CCONVT_NO_NUMBERu201D.;
Regards,
Md Ziauddin

Incompatibility for custom Report is not working properly

Hi Gurus,
Need your help to diagnose the issue here.
The problem here is as under
We have a custom report CP1 which fills a table T1 during the process (table is truncated in the begining of the procedure). This CP1 is set incompatible to itself so that table architecture will work properly.
but the problen here is the next run starts ( 2sec, 5 secs or 10 secs) prior to the actual completion of the last run.
the data is as
CONCURRENT_ REQUEST ACTUAL_START ACTUAL_COMPLETION_
PROGRAM_ID ID                DATE     DATE
138361     3033673     7/3/2012 10:31:46 AM     7/3/2012 10:57:13 AM
138361     3033671     7/3/2012 10:28:47 AM     7/3/2012 10:31:42 AM
138361     3033670     7/3/2012 10:25:22 AM     7/3/2012 10:28:48 AM
138361     3033669     7/2/2012 7:07:21 PM     7/3/2012 10:25:37 AM
138361     3033665     7/2/2012 7:05:10 PM     7/2/2012 7:07:15 PM
here as you see the req 3033670 starts @7/3/2012 10:25:22 AM whereas the req 3033669 ends at 7/3/2012 10:25:37 AM (though we have terminated the 3033669 ) similarly for 3033670 and 3033671.
the following query is giving 1 row
select * from FND_CONCURRENT_PROGRAM_SERIAL
where RUNNING_CONCURRENT_PROGRAM_ID = 138361 is
We have bounced the CM after setting the incompatibility as per the
Setting up Incompatibility Rules for Custom Reports [ID 107224.1] suggested by Hussein on this forum.
This is happening on our prod env. kindly suggest something.
We are on 12.1.1 (r12).
Thanks
-Shivdeep Singh
Edited by: user1054040 on Jul 2, 2012 10:58 PM

Hi Srini,
We have raised a SR with oracle for this it seems to be a bug in 12.1.1 release I will update the same once I got any fix or patch from oracle.
from the intial investigation it seems to be that the imcompatibility wit itself feature is not working as expected.
Also this is the latest case
CONCURRENT_
PROGRAM_ID REQUEST_ID ACTUAL_START_DATE ACTUAL_COMPLETION_DATE COMPLETION_TEXT
150364     3036174     7/3/2012 4:55:03 PM     7/3/2012 4:57:04 PM     Normal completion
150364     3036178     7/3/2012 4:55:57 PM     7/3/2012 4:57:47 PM     Normal completion
150364     3036181     7/3/2012 4:57:27 PM     7/3/2012 4:58:09 PM     Normal completion
the request id 3036178 should have been started after the completion of 3036174 ie after 7/3/2012 4:57:04 PM but it actually starts 7/3/2012 4:55:57 PM
hope this give the better understanding for the scenario here.
Thanks
-Shivdeep Singh
Edited by: user1054040 on Jul 4, 2012 11:36 PM

Time Machine says Backup Delayed After Upgrading to Lion

Time Machine says Backup Delayed After Upgrading to Lion on both my Macs. It backs up fine when ever I connect to the USB drive but now seems to want to back up hourly when before weekly was OK. When it does not compleye an hourly backup it reports a delayed backup - failure on both machines. How do it revert back to it reminding me to do weekly backups?

I'm having the same issue with Time Machine on OS X Lion!
According to this webpage: http://web.me.com/pondini/AppleTips/LionChanges.html
Backups (i.e., Time Machine, SD, CCC, etc.) will only save the current "Version" of files.
The above statement sounds like the issue @iJRB and myself are having after upgrading to Lion where Time Machine shows the following error message below within "System Preferences > Time Machine"
@iJRB: Is this the error message you are seeing?

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Transaction code for Custom report

Hi,
How to create transaction code for Custom report ?
the custom report is a drilldown report of COPA, which can seen in tcode FDI3.
then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
Thanks,
Swetha

Hi Swetha,
There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
--Ram

Problem: Run Time Evaluation for Future Period

Hi SAP Gurus, can someone help me solving this problem:
My client need to run time evaluation for 2-months period ahead of time. But every time I tried, time evaluation always stops at end of the current month, no further dates in the future. I had created attendance data 2002 for all the future dates. IT7, 2002, 2006 and all configurations seem to be OK (T510S,T569R). Test run is also OK with good future results. What could possibly be missing? Thank you in advance.
Bill

Thank you very much, Arun, Banu, Stefan and Om.
Yes, I have entered the "Evaluation up to" date (60 days later);
The schema has a function "Check FUT".
Test future run result was generated correctly.
Still I can't have future results in real run.
So, what else I should check into?
Thanks again.
Bill

An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Thamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null

InfoObject is missing in report after upgrade

Hi,
My InfoObject Statistical ID is missing in Report after Upgrading from 3.5 to 7.0.
I did comparison of report before and after upgrade and found this issue.
the data content is the same but only this infoObject cannot be seen in the report
how do I correct this issue.
thanks
Edited by: Bhat Vaidya on Aug 6, 2008 12:24 PM

This not fixed. SAP couldn't explain why

I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion.

I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion. ANy ideas how to get rid of it? I have uncheked everything in mu users and groups and unchecked restore windows in the general file.

When you logout did you uncheck the Reopen windows when logging back in check box at the bottom of the logout window.

Getting run time error for multiple counter plan

Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
Srinika

Hi,
Please check reason for update termination in Transaction code SM13.

Modification assistant for customer reports

Hi,
How to enable modification assistant for the reports in customer namespace ?
Regards,
Rafal Olechowski

sorry for the late reply.
No You can not do it through Modifictaion Overview for Custom reports, unless and untill its an standard SAP program.
Might be there any standard functions which could help you, but am not sure of this.
And as i said the version management and the version comparision can help you know the changes done in any report. in the version management only you can find the version comparision based on the requests.
Regards
Gopi

Tip: adding metadata for customized reporting

Users sometimes build their own custom reports around dimensions specific to their company. For example, a bank may want to know about financial data elements that are high priority, but violate completeness rules. You can do this with Data Insight 11.5.1.1.
Simply have your Data Insight administrator choose weights, dimensions, priorities, and so on in their Data Insight UI. All of the users can choose Rule Classifications when they edit/create a rule and specify the appropriate items. This metadata is stored in the repository, which you can easily query for custom reports.
For more details, check the Data Insight User's Guide. Enjoy!

Hi,
I hope you wont mind me asking for the steps on how to do this.
The customized data source which i had obtained from the ecc6 is zskat. And the local language which are actually being maintained in the R/3 FI-GL. The following fields in zskat datasource are:
KTOPL     Chart of Accounts
MCOD1     Search Term for Matchcode Search
SAKNR     G/L Account Number
SPRAS     Language Key
TXT20       G/L account short text
TXT50       G/L Account Long Text
If i am not wrong, SPRAS would be the key to the language right? I found that it is in the table T002, but again, how would i know which one would be the correct text?
Since the language translation had been maintained in the source system, i guess i wont need to use the flat file option do i?
Should I find the text data from the source system and load as you had advised? Should I do it through DTP and so on?
Could you show me some steps by steps if possible? Simple one if possible.
Cheers
Tommy
Edited by: Yu Tommy on Jul 23, 2008 12:14 PM
Edited by: Yu Tommy on Jul 23, 2008 12:16 PM
Edited by: Yu Tommy on Jul 23, 2008 12:27 PM

Duplicate Reports after upgrading to SCCM 2012 R2 CU1

Single Primary Site with SCCM 2012 R2 CU1.
Upgraded from SCCM 2012 SP1.
Duplicate Reports after upgrading to SCCM 2012 R2 CU1
SCCM 2012 R2 CU1
SQL 2008 SP3 CU 14

This is known to happen if you modified any of the default reports
I've seen that happening even in my lab (and and customers) where I am sure that I did not modify them. Just delete them (they should be prefixed with "_").
Torsten Meringer | http://www.mssccmfaq.de

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

Run time eroor for customer report after upgrade DYNP_TOO_MANY_RADIOBUTTONS

Similar Messages

Maybe you are looking for