Run-time error "ASSERTION_FAILED" occurred after BPC install
When I try to connect through the gui, it gives me a dump in the netweaver system.
Run-time error "ASSERTION_FAILED" occurred
Dump -
The ASSERT condition was violated.
http://localhost:1080/osoft/
Hi David,
We are running into the same issue too. Can you please provide more details as to how you fixed this?
We are on SAP EHP 1 for SAP NetWeaver 7.0, SAP_BW: SAPKW70103, CPMBPC: SAPK-70002INCPMBPC.
Thanks,
Shalin Shah
Similar Messages
-
Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred
When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
RogérioHi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj -
Hi All
Please help, I have recently got a new PC and reinstalled Contribute CS3. I had to update to MS Service Pack 3 due to other software requirements.
I previously had some shockwave files saved on to pages within my site, however each time i now try to update the pages with any shockwave file on the page, I get the following.
A Run Time Error has Occured
Do you wish to debug?
LIne '0'
Error 'Null' is Null or not an object.
With an option of YES or No
If I press 'No' I end up in a continous loop and end up having to carry out an End Task.
If I press 'YES' I end up In Microsoft Script Editor with the code below
try { document.getElementById("").SetReturnValue(__flash__toXML(getFlashLogLevel("xcelsius")) ); } catch (e) { document.getElementById("").SetReturnValue("<undefined/>"); }. There is no way of editing the code and I still end up ending the task.
Could anyone tell me if this is related to the installation of Serive Pack 3 or is there something more sinister going on.
Thanks fior reading and any adive would be gratefully received.
Thank
LukeHi Krishna
Thanks for your reply, it was while trying to "edit" the page containing the shockwave file however it’s a bit of a strange one, as When I reposted this post , I had been experiencing the problem for about a week. I then went on leave for a week and when I returned it started working again???. I queried with my IT department if anything had changed or been updated but they could not think of anything.
So for now it's working, but if you have any thoughts on what may of happened I would appreciate any suggestions?
Thanks again
Luke -
Run-time error "PXA_NO_SHARED_MEMORY" occurred
Hi All,
My production system is running fine. And when i check SM21 I saw a lot of error message Run-time error "PXA_NO_SHARED_MEMORY" occurred and Run-time error "SYSTEM_NO_ROLL" occurred. However I can't see any error in ST22. I had read sap note 307976. And dont know when I restart the SAP services is it will be fine?
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Feb 22 08:13:29 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.58)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 58
M intno 20020600
M make: multithreaded, ASCII
M pid 2440
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2440) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 11592 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 047D0040, size: 2510384)
M DpShMCreate: allocated sys_adm at 047D0040
M DpShMCreate: allocated wp_adm at 047D17A8
M DpShMCreate: allocated tm_adm_list at 047D44F0
M DpShMCreate: allocated tm_adm at 047D4518
M DpShMCreate: allocated wp_ca_adm at 049F2460
M DpShMCreate: allocated appc_ca_adm at 049F6AB0
M DpShMCreate: allocated comm_adm_list at 049F8220
M DpShMCreate: allocated comm_adm at 049F8238
M DpShMCreate: allocated vmc_adm_list at 04A27038
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 04A27060
M DpShMCreate: allocated wall_adm at 04A27068
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Feb 22 08:13:30 2010
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 58
C patchcomment MSSQL: Workaround for SQL2005 change in RpcNexecInsert (814383)
C np:(local) connection used on PKG-PRD
C CopyLocalParameters: dbuser is 'prd'
C
C Mon Feb 22 08:13:31 2010
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Provider Release:08.50.1022
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Mon Feb 22 08:13:42 2010
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache PKG-PRD_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [PKG-PRD] server_used : [np:(local)], dbname: PRD, dbuser: prd
C pn_id:PKG-PRD_PRDPRD_PRD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100222 081330 PKG-PRD
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Mon Feb 22 08:14:02 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 09E50040, size: 4400128)
M SHM_ROLL_AREA (addr: 12510040, size: 262144000)
M SHM_PAGING_AREA (addr: 617B0040, size: 113246208)
M SHM_ROLL_ADM (addr: 0A290040, size: 2616690)
M SHM_PAGING_ADM (addr: 0A510040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0A5A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0A5F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14
B dbtbxbuf: Buffer TABL (addr: 103500C8, size: 30000128, end: 11FEC4C8)
B dbtbxbuf: Buffer TABLP (addr: 0E5200C8, size: 10240000, end: 0EEE40C8)
B dbexpbuf: Buffer EIBUF (addr: 0EF000D0, size: 4194304, end: 0F3000D0)
B dbexpbuf: Buffer ESM (addr: 0F3100D0, size: 4194304, end: 0F7100D0)
B dbexpbuf: Buffer CUA (addr: 0F7200D0, size: 3072000, end: 0FA0E0D0)
B dbexpbuf: Buffer OTR (addr: 0FA100D0, size: 4194304, end: 0FE100D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 120D8040
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 121F0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 121F03E0
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 107 MB, reducing # of fragments
A System page size: 4kb, admin_size: 13396kb.
A Attached to PXA (address 21F30040, size 440000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
C The IRow interface is supported by this OLEDB provider
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
A
A Mon Feb 22 08:14:03 2010
A ABAP ShmAdm attached (addr=53EC5000 leng=20955136 end=552C1000)
A >> Shm MMADM area (addr=5422D180 leng=134720 end=5424DFC0)
A >> Shm MMDAT area (addr=5424F000 leng=17244160 end=552C1000)
A RFC Destination> destination pkg-prd_PRD_00 host pkg-prd system PRD systnr 0 (pkg-prd_PRD_00)
A RFC Options> H=pkg-prd,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 49
M ThrCreateShObjects allocated 14604 bytes at 0FFD0040
N
N Mon Feb 22 08:14:05 2010
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\PRD\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\PRD\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E
E Mon Feb 22 08:14:39 2010
E Replication is disabled
C
C Mon Feb 22 08:15:00 2010
C sloledb.cpp [DoDbcc,line 2930]: Error/Message: (err 2571, sev 0), User 'prd' does not have permission to run DBCC CACHEPROFILE.
C Procname: [No proc]
C
C Mon Feb 22 08:15:01 2010
C statement rerun with user dbo was successful, you can ignore the preceeding message
C
C Mon Feb 22 08:16:27 2010
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
S
S Mon Feb 22 08:19:23 2010
S found spool memory service RSPO-ACTIONS at 121F4C68
A
A Mon Feb 22 08:19:55 2010
A TH VERBOSE LEVEL FULL
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12304]
C Rollback Work (0)
A
A Mon Feb 22 08:19:59 2010
A Mon Feb 22 08:19:59 2010
A
A ABAP/4 Program /SDF/SAPLRI_SQLSERVER .
A Source /SDF/LRI_SQLSERVERU02 Line 264.
A Error Code CALL_FUNCTION_CONFLICT_LENG.
A Module $Id: //bas/640_REL/src/krn/runt/abfunc.c#14 $ SAP.
A Function FuncParams Line 2906.
C Rollback Work (0)
C
C Mon Feb 22 08:20:00 2010
C sloledb.cpp [DoDbcc,line 2930]: Error/Message: (err 2571, sev 0), User 'prd' does not have permission to run DBCC loginfo.
C Procname: [No proc]
C
C Mon Feb 22 08:20:01 2010
C statement rerun with user dbo was successful, you can ignore the preceeding message
C
C Mon Feb 22 08:20:07 2010
C sloledb.cpp [ParamStmtExec,line 12251]: Error/Message: (err 50000, sev 0), Table not found.
C Procname: [##Y3PKG_PRDprd00000024400000003365081342]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 99. stmt: [sap_get_table_size_info 'syscomments', 'prd', 'PRD'
C /* R3:CL_SQL_RESULT_SET=============CP:234 T: */
C ]
C Conn_i:2 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 222194
C dbdsmss: DBSL99 SQL50000
C Table not found.
B ***LOG BY2=> sql error 50000 performing FET [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY0=> Table not found. [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY1=> sql error 50000 [dbacds#2 @ 1187] [dbacds 1187 ]
B
B Mon Feb 22 08:26:10 2010
B dbmyclu : info : my major identification is 3232261128, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 31B87DDDE43B904B955F2E6B45F604BE.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
N login/password_change_for_SSO : 1 -> 1
B
B Mon Feb 22 08:32:54 2010
B table logging switched off for all clients
M
M Mon Feb 22 08:45:50 2010
M PfHIndInitialize: memory=<60720150>, header=<60720150>, records=<60720180>
S
S Mon Feb 22 08:55:52 2010
S handle memory type is RSTSPROMMM
M
M Mon Feb 22 09:18:08 2010
M *** ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c 423]
M *** ERROR => MsIAttachEx: NiBufConnect to /H/192.168.100.7/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001/sapmsOSS failed (rc=NIEROUT_SNC_FAILURE) [msxxi.c 633]
M *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_SNC_FAILURE) [lgxx.c 2984]
M *** ERROR => LgIGroup: LgIAttach(rc=-101) [lgxx.c 3504]
A TH VERBOSE LEVEL FULL
M
M Mon Feb 22 09:18:28 2010
M *** ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c 423]
M *** ERROR => MsIAttachEx: NiBufConnect to /H/192.168.100.7/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001/sapmsOSS failed (rc=NIEROUT_SNC_FAILURE) [msxxi.c 633]
M *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_SNC_FAILURE) [lgxx.c 2984]
M *** ERROR => LgIGroup: LgIAttach(rc=-101) [lgxx.c 3504]
A TH VERBOSE LEVEL FULL
C
C Mon Feb 22 10:01:09 2010
C Rollback Work (0)
A
A Mon Feb 22 10:18:24 2010
A TH VERBOSE LEVEL FULL
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12304]
C Rollback Work (0)
A
A Mon Feb 22 10:18:26 2010
A Mon Feb 22 10:18:26 2010
A
A ABAP/4 Program /SDF/SAPLRI_SQLSERVER .
A Source /SDF/LRI_SQLSERVERU02 Line 264.
A Error Code CALL_FUNCTION_CONFLICT_LENG.
A Module $Id: //bas/640_REL/src/krn/runt/abfunc.c#14 $ SAP.
A Function FuncParams Line 2906.
C Rollback Work (0)
C sloledb.cpp [DoDbcc,line 2930]: Error/Message: (err 2571, sev 0), User 'prd' does not have permission to run DBCC loginfo.
C Procname: [No proc]
C statement rerun with user dbo was successful, you can ignore the preceeding message
C
C Mon Feb 22 10:18:29 2010
C sloledb.cpp [ParamStmtExec,line 12251]: Error/Message: (err 50000, sev 0), Table not found.
C Procname: [##Y3PKG_PRDprd00000024400000012657081342]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 99. stmt: [sap_get_table_size_info 'syscomments', 'prd', 'PRD'
C /* R3:CL_SQL_RESULT_SET=============CP:234 T: */
C ]
C Conn_i:2 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 222194
C dbdsmss: DBSL99 SQL50000
C Table not found.
B ***LOG BY2=> sql error 50000 performing FET [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY0=> Table not found. [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY1=> sql error 50000 [dbacds#2 @ 1187] [dbacds 1187 ]
Could anybody advice me on this
Regards,
ZulHi,
I hope 440000 will not the cause,
this might occur due to many reasons,
1. make sure you have all the components(Applications,OSlevel,DBlevel) are at same level in entire the landscape.
2. you can observe the evenlogs at OSlevel to get the error information pointing to. Also check for the dumps/logs(work direcotry).
3. if not, can open SAP message.
regards
Nagaraju -
Getting AB0 Run-time error "RFC_NO_AUTHORITY" occurred.
We are using ecc5 with oracle 9i and windows 2003. I am getting dumps every day at same time and error AB0 Run-time error "RFC_NO_AUTHORITY" occurred.
.Please suggest how to correct them step.
Details Page 3 Line 29 System Log: Local Analysis of sap 1
Time Ty. Nr Cl. User Tcod MNo Text
20:50:59 DIA 01 000 TMSADM R68 Perform rollback
Details
Recording at local and central time........................ 04.11.2008 20:50:59
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1Problem class....... W Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000232200
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R6 8
Variable parts...... ThIRollroll bathxxhead1240
Details Page 3 Line 30 System Log: Local Analysis of sap 1
Time Ty. Nr Cl. User Tcod MNo Text Date : 04.11.08
20:51:01 DIA 01 000 TMSADM
*AB0 Run-time error "RFC_NO_AUTHORITY*" occurred
Details
Recording at local and central time........................ 04.11.2008 20:51:01
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abrfcfun
Line................ 3686
Error text.......... ab_RfcAuthorityCheck
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. RFC_NO_AUTHORITY
Technical details
File................ 000048
Position............ 0000232560
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_RfcAuthorityCheck abrfcfun3686
20:51:01 DIA 01 000 TMSADM
AB1 > Short dump "081104 205101 sap TMSADM " generated
Details
Recording at local and central time........................ 04.11.2008 20:51:01
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... SABP
ABAP Mini dump
Date................ 20081104
Time................ 205101
Host................ sapsm
User................ TMSADM
Documentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
Technical details
File................ 000048
Position............ 0000232740
Entry type.......... s ( ABAP Runtime Error )
Message ID.......... AB 1
Variable parts...... 081104205101sapsm TMSADM
Regards,Please find the Sqlnet.ora file details.
sqlnet.ora
Filename......: sqlnet.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
NAME.DEFAULT_ZONE = WORLD
SQLNET.EXPIRE_TIME = 0
SQLNET.AUTHENTICATION_SERVICES = *(NTS){*code}TCP.NODELAY=YES
*If i changes NTS to None then there is and error*
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\soladm.SAPSM>SQLPLUS
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 7 22:14:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: /as sysdba
ERROR:
ORA-01031: insufficient privileges
Regards,
Shiva
Edited by: SHIVA on Nov 8, 2008 11:56 AM -
Run-time error "CALL_FUNCTION_NOT_FOUND" occurred
Hi everyone:
I am proving an interface from a ficticious R/3 system to XI, but there is a problem when connecting with XI.
The outbound channel(sender to XI) is not created in the directory because of from a R/3 service you dont need to create one. In the system log of XI(sm21) appears this error log:
12:58:00 DIA 000 100 XIRWBUSER R68 Perform rollback
12:58:00 DIA 000 100 XIRWBUSER AB0 Run-time error "CALL_FUNCTION_NOT_FOUND" occurred
12:58:00 DIA 000 100 XIRWBUSER AB1 > Short dump "060320 125800 slde1s30 XIRWBUSER " generated
CAN SOMEBODY HELP ME PLEASE????Hi Alvaro,
you have to import a RFC to IB Repository, where it is to use as Outbound-Interface.
Call (asynchronous) at R/3 side with
CALL FUNCTION 'myFunction'
DESTINATION 'myDestination'
IN BACKGROUND TASK
... "parameters
COMMIT WORK.
Regards,
Udo -
Run-time error "OBJECTS_OBJREF_NOT_ASSIGNED" occurred
Hi sdners,
in sm21 i got this error, please tell me how to resolve this problem step by step..
Run-time error "OBJECTS_OBJREF_NOT_ASSIGNED" occurred
and
Database error: TemSe->XRTAB(2)->128 for table TST03 key CONNE_IMPORT_WRONG_COMP_TYPE
then what do i need to do....
thanks in advance, marks will awarded accordinglly....Hi Friends,
The problem is solved. The issue was with SICF service activation.
Certain system services were not activated.
Thanks,
Shashank Shirali -
제품 : FIN_GL
작성날짜 : 2003-11-20
[ADI]Budget upload fails with "A run-time error has occured:...
===========================
PURPOSE
아래의 오류사항에 대한 해결
Budget upload fails with "A run-time error has occured:current task will terminate".
Problem Description
ADI를 이용하여 GL의 Budget자료를 upload시 오류
Workaround
Solution Description
Client PC에서 regedit를 이용하여 NLS_LANG값들을 applications의 NLS_LANG과 같은 값으로 바꿔주세요
Reference Documents
-------------------Hi Krishna
Thanks for your reply, it was while trying to "edit" the page containing the shockwave file however it’s a bit of a strange one, as When I reposted this post , I had been experiencing the problem for about a week. I then went on leave for a week and when I returned it started working again???. I queried with my IT department if anything had changed or been updated but they could not think of anything.
So for now it's working, but if you have any thoughts on what may of happened I would appreciate any suggestions?
Thanks again
Luke -
Run-time error "CONVT_NO_NUMBER" occurred
Hi,
When I checked my Development System for logs (using SM21)I got the logs
which are as follows :
02:16:33 DIA 001 100 KMENON VF02 AB0 Run-time error "CONVT_NO_NUMBER" occurred
02:39:27 DIA 000 100 KMENON AB0 Run-time error "OBJECTS_NOT_CHAR" occurred
Can someone please help me to know what the above logs describe and what are the reasons for these Run-time errors and suggest the solution for these runtime errors.
Below is the description of the above logs which I can see in my Development System:
Details Page 2 Line 7 System Log: Local Analysis of SAPECCDEV 1
Time Ty. Nr Cl. User Tcod MNo Text Date : 10.09.07
02:16:33 DIA 001 100 KMENON VF02 AB0 Run-time error "CONVT_NO_NUMBER" occurred
Details
Recording at local and central time........................ 10.09.2007 02:16:33
Task................ 05532 / Dialog work process No. 01
User................ KMENON
Client.............. 100
Terminal............ alpha-pa
Session............. 2
Transaction code.... VF02
Program name........ SAPMV60A
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abmove1
Line................ 1892
Error text.......... ab_Zappy
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. CONVT_NO_NUMBER
Technical details
File................ 000008
Position............ 0000235800
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_Zappy abmove1 1892
Details Page 2 Line 10 System Log: Local Analysis of SAPECCDEV 1
Time Ty. Nr Cl. User Tcod MNo Text Date : 10.09.07
02:39:27 DIA 000 100 KMENON AB0 Run-time error "OBJECTS_NOT_CHAR" occurred
Details
Recording at local and central time........................ 10.09.2007 02:39:27
Task................ 05576 / Dialog work process No. 00
User................ KMENON
Client.............. 100
Terminal............ alpha-pa
Session............. 2
Transaction code....
Program name........
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abtchk
Line................ 0543
Error text.......... ab_jtychk
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. OBJECTS_NOT_CHAR
Technical details
File................ 000008
Position............ 0000236520
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_jtychk abtchk 0543Hi Joerg,
Actually I don't know about ABAP Programming but I can send you the ABAP source code which is as follows:
Modulpool zur Fakturierung
Report-Header / Tabellen / Daten / Field-Symbols
INCLUDE MV60ATOP.
PBO - Module alphabetisch geordnet
INCLUDE MV60AO0C.
INCLUDE MV60AO0D.
INCLUDE MV60AO0F.
INCLUDE MV60AO0I.
INCLUDE MV60AO0R.
INCLUDE MV60AO0S.
INCLUDE MV60AO0T.
INCLUDE MV60AO0V.
INCLUDE MV60AO0X.
INCLUDE MV60AOTX. "Textverarbeitung
PAI - Module alphabetisch geordnet
INCLUDE MV60AI0B.
INCLUDE MV60AI0D.
INCLUDE MV60AI0F.
INCLUDE MV60AI0K.
INCLUDE MV60AI0N.
INCLUDE MV60AI0R.
INCLUDE MV60AI0V.
INCLUDE MV60AI0X.
INCLUDE MV45AITX. "Textverarbeitung
PAI - Module alphabetisch geordnet
include mv60av0v.
FORM-Routinen alphabetisch geordnet
INCLUDE MV60AF0B.
INCLUDE MV60AF0C.
INCLUDE MV60AF0E.
INCLUDE MV60AF0F.
INCLUDE MV60AF0K.
INCLUDE MV60AF0N.
INCLUDE MV60AF0S.
INCLUDE MV60AF0T.
INCLUDE MV60AF0V.
INCLUDE MV60AF0X.
INCLUDE-Baustein zur Nachrichtensteuerung
INCLUDE FV61BF00.
INCLUDE MV60AI0P_PASS_FCODE.
INCLUDE MV60AI0G_GET_FCODE.
INCLUDE MV60AO0P_PRICING_SET_DATA.
INCLUDE MV60AI0P_PRICING_GET_DATA.
INCLUDE MV60AI0S_STATUS_6900.
INCLUDE MV60AO0F_TABLECONTR.
INCLUDE MV60AO0P_PBO_TABSTRIP.
INCLUDE MV60AF0P_PBO_TABSTRIP.
INCLUDE MV60AI0P_PAI_TABSTRIP.
INCLUDE MV60AF0P_PAI_TABSTRIP.
INCLUDE MV60AO0R_REGULIERER_ADRESSE.
INCLUDE MV60AI0X_XVBRP_INIT.
INCLUDE MV60AF0X_XVBRP_INIT.
INCLUDE MV60AF0P_PBO_TABSTRIP_EXPORT.
INCLUDE MV60AF0P_PBO_TABS_INIT_EX_ITEM.
INCLUDE MV60AF0P_PBO_TABS_EX_ITEM.
INCLUDE MV60AI0P_PAI_EXPORT_HEADER.
INCLUDE MV60AF0P_PAI_EXPORT_HEADER.
INCLUDE MV60AI0P_PAI_EXPORT_ITEM.
INCLUDE MV60AF0P_PAI_EXPORT_ITEM.
INCLUDE TCRTDATA.
INCLUDE MV60AF0K_KURGV_TXTPA_ERMITTELN.
INCLUDE MV60AI0S_SD_PARTNER_GET_FCODE.
INCLUDE MV60AF0S_SD_PARTNER_GET_FCODE.
*INCLUDE MV60AF0X_XVBRP_TCTRL_SCROLLEN.
INCLUDE MV60AO0X_XVBRP_CTRL_INIT.
INCLUDE MV60AO0X_XKOMFK_TCTRL_INIT.
INCLUDE MV60AF0X_XKOMFK_TCTRL_SCROLLEN.
*INCLUDE MV60AO0X_XVBRK_TCTRL_INIT.
INCLUDE MV60AF0X_XVBRK_TCTRL_SCROLLEN.
*INCLUDE MV60AO0X_XKOMFK_TCTRL_INIT.
INCLUDE MV60AO0X_XVBRK_TCTRL_INIT.
*INCLUDE MV60AF0X_XVBRK_TCTRL_SCROLLEN.
*INCLUDE MV60AO0X_XVBRP_CTRL_INIT.
INCLUDE MV60AF0X_XVBRP_TCTRL_SCROLLEN.
INCLUDE MV60AF0X_XVBPA_KURGV_ERMITTELN.
INCLUDE MV60AO0C_CUST_HEAD_SET_DATA.
INCLUDE MV60AF0C_CUST_HEAD_SET_DATA.
INCLUDE MV60AI0C_CUST_HEAD_PASS_FCODE.
INCLUDE MV60AF0C_CUST_HEAD_PASS_FCODE.
INCLUDE MV60AI0C_CUST_HEAD_GET_DATA.
INCLUDE MV60AF0C_CUST_HEAD_GET_DATA.
INCLUDE MV60AO0C_CUST_ITEM_SET_DATA.
INCLUDE MV60AF0C_CUST_ITEM_SET_DATA.
INCLUDE MV60AI0C_CUST_ITEM_PASS_FCODE.
INCLUDE MV60AF0C_CUST_ITEM_PASS_FCODE.
INCLUDE MV60AI0C_CUST_ITEM_GET_DATA.
INCLUDE MV60AF0C_CUST_ITEM_GET_DATA.
INCLUDE MV60AO0C_CUST_HEAD_ACTIVATE.
INCLUDE MV60AF0C_CUST_HEAD_ACTIVATE.
INCLUDE MV60AO0C_CUST_ITEM_ACTIVATE.
INCLUDE MV60AF0C_CUST_ITEM_ACTIVATE.
Regards,
Ashish Thakkar -
Run time error in VA01 after entering material at item
Syntax error in program "SAPFV45V ".
Error in the ABAP Application Program
The current ABAP program "SAPMV45A" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPFV45V " in include
"FV45VF0A_ADD_ATP_DATA_TO_VBAP " in
line 38:
"The data object "XVBAP_LOC" does not have a component called "STOCKLOC
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPMV45A" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Can you please let me know the reason for this error.
we have completed configuration in DEV and moved all the requests into QAS
and at the first transaction of [VA01] immediately after entering material and qty
it is throwing the run time error.
please let me know, whether this error is from functional side, or from technical
(BASIS).
Please also let me know, what can be done immediately.
Thanks
MaheshoeYou need to apply SAP Note to fix this.
find the note below:
[NOTE 1072316|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1072316]
Take assistance from your Basis. -
Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM
Hello Experts,
We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
Category ABAP Programming Error
Runtime Errors GETWA_NOT_ASSIGNED
ABAP Program SAPLFMBD_DATABASE_ACCESS
Application Component PSM-FM-BCS-BU
Date and Time 10.06.2014 13:28:36
Short text
Field symbol has not yet been assigned.
Requirement: Please let us know how to solve this issue
we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
Regards,
ChalapathiHello Shyam / Javed,
Thank you for your inputs.
I have solved issue, now it is working fine.
Activated EA-PS and included into transport request. executed program RGZZGLUX.
Note used to solve issue :0000908007
Regards,
Chalapathi -
Run-time error "DDIC_TYPE_INCONSISTENCY" occurred
Hello experts,
SAP version :SAP ECC 6.0
DB : Oracle 10.2.0.2
After a local client copy we had the following error showing in scc3:
Completed w. Dictionary Errors
ICLPART FS-CM DDIC Error (See SE14)
In SE14 when i check the db object all is well but when i check the runtime object i get :
Hdr: Active runtime object and Active source has Inconsistent
and....
Fields: Active runtime object and Active source has Inconsistent
ASSIGN_GUID does not exist
Do you have any idea how to solve this
Thanks for your help.
Regards
DirkHello Visser,
Please find the following link to goto a note which address this, Run-time error "DDIC_TYPE_INCONSISTENCY"
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=491022
Note number is: 491022
If you get the above error in ABAP dump, then it could be due the backgroung job which was showing the status cancelled daily.
Just delete the job from sm37 and it should fix the issue.
Hope it helps.
Cheers,
Satish. -
Run time error in MIGO after maintaining tax code
Hello Experts,
I had configured the new tax code ,which is working fine for the PO document ZLOC domestic and the account category Z.
While doing the MIGO for purchase document type ZGEN general purchase , I am getting run time error:
"Division by 0 (type P) in program "SAPLJ1IEX".
When I debugged the code i found that inside FM: 'J_1IEX_DEFAULT_EXCISE_DUTY'
one another FM is being called: 'J_1I6_UNIT_CONVERSION' which is returning the value "ls_ekpo-menge" as 0(Zero).
later in the code when "ls_ekpo-menge" used in calculation then divide by 0 runtime error is coming.
Please suggest what need to be done.
Is there anything related to tax code? How should I correct it?Hi,
There is not value in that field for PO quantity / Value it is missing while doing MIGO. Check whether you have maintained values for all required fields.
Kiran -
Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.
Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors CONVERSION_CODEPAGE_UNKNOWN
Date and Time 03.06.2008 14:27:46
|Short text
| Unable to convert from code page ' ' to code page '4103'. |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
| TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM RSDBSPVD RSDBSPVD 119
IMPORT_VARIANT_STATIC
3 FORM SAPLSVAR LSVARF07 522
IMPORT_VAR_SELC
2 FUNCTION SAPLSVAR LSVARU07 80
RS_VARIANT_CONTENTS
1 EVENT RS_VARIANT_VALUES RS_VARIANT_VALUES 22
| START-OF-SELECTIONSorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read = 1053698
Number of rows skipped = 0
Number of rows loaded = 1053698
Number of rows rejected = 0
Number of rows deleted = 0
Number of rows committed = 1053698
Do you think that convert codepage errore is due to this warning message? -
Installing on Windows 7, IE, get error message "run time error has occured in script"
when attempting to install latest version of Flash Player on Windows 7 computer with IE, during installation I get message "runtime error has occured in script".
& installation ceases. what can I do to obtain Flash Player on my computer? Aaron100,000 Thank you"s! I tried what you suggested, and can now
watch PLAYON through my Roku on the TV set. Previously, Roku insisted that I have Adobe Flash Player. Aaron
Senators Should Wear Uniforms like NASCAR Drivers So We Could Identify Their Corporate Sponsors.
Maybe you are looking for
-
No Payload in sxmb_moni call adapter
I did soap to soap asynchronous scenario.... my requirement is to send one systems soap request as it is to other systems soap response... i.e., sending soap message asynchronously... its often saying that queue is stopped... i am deleting that queue
-
When opening a jpg in illustrator it automatically rotates 90 degrees
I'm only new to illustrator so please excuse my ignorance. I'm trying to open a jpg and edit it but when I initally open it the picture is on a 90 degree angle. How do I fix this. Thanks
-
Performance issues, possibly video.
My computer is by no means new (p4 2.4, 2GB, 128MB AGP video), however, I get particularly crappy performance through most simple tasks. Scrolling in any browswer is SUPER choppy (CPU usage of browser & Xorg spikes when scrolling). Window performance
-
Hi, I am having several problems reinstalling CS4 Design premium on my new mac with Mountain Lion. Time machine backup reinstall didnt work I kept getting licensing no longer works 150:30 error. So I contacted Adobe and they told me I had to reinstal
-
VBScript doesn't work for UTF-8 text files
I'm new to scripting. When I tried to run the sample VBScript on page 8 of the PDF doc, "Adobe Introduction to Scripting," I got an error message, "Invalid Character, Line 1, Column 1." I'm running CS3 Design Premium on Windows XP Pro. The problem tu