Run Time Error ASSERTION_FAILED while moving Transformation from Quality to Prodcution
Hi All,
Need your urgent Help here !
we had moved 4 transformations into prodcution from Quality out of which 3 were succesful adn one Transformation has failed due to RC12 "ASSERTION_FAILED" . In the attached screenshot , you can find few more details.
The transformation we are moving is a new one and after the transport failure we can still see that in Prodcution , but when we double click on it , it is throwing dump of "ASSERTION_FAILED"(I can see only T versions of routines and formula exisitng in RSTRANSTEPROUT Table in Production)
we are currently in SAP 7.3 and with SP 8 . I have seen so many solutions with lot of SAP note recommendations but we are not sure of the exact solution .
Please let know the correct solution .
Hi Vinod,
while moving to quality you didn't face any problem?
Again try to import same request at bw prod and see.
if its failed again then again collect into transport request at dev system and move to qua/prod.
While collecting transformations you need to collect all routines.
Best way to collect transformations is RSA1-->transport connection, expand middle pane, transforamtions-->select object-->find your transformations and drag to rigth side screen.
at right side screen, expand your transformations and select all routines which are exist.
After that you can released and import at target systems.
Thanks
Similar Messages
-
Run-time error "ASSERTION_FAILED" occurred after BPC install
When I try to connect through the gui, it gives me a dump in the netweaver system.
Run-time error "ASSERTION_FAILED" occurred
Dump -
The ASSERT condition was violated.
http://localhost:1080/osoft/Hi David,
We are running into the same issue too. Can you please provide more details as to how you fixed this?
We are on SAP EHP 1 for SAP NetWeaver 7.0, SAP_BW: SAPKW70103, CPMBPC: SAPK-70002INCPMBPC.
Thanks,
Shalin Shah -
Run time error '9' while installing BIP Desktop 10.1.3.4.1 for Windows
Hi,
I've been getting 'run time error '9' Subscript out of range error while installing BIP Desktop.
I have MS Word 2003 and the laptop's OS is Windows XP SP3. I have searched the net and this forum for suggestions
and followed what was recommended (install .NET framework 2.0, make sure no MS Office processes are not running while
installing the software, Admin rights at Registry level on BI Publisher folder etc..) but no use.
This is a new laptop which I just received. On my existing laptop (which has similar configuration), I've installed BIP long time
ago and do not remember facing this error. If any one has come across this problem recently and was able to trouble shoot it,
please share with me how you were able to overcome the problem.
Thanks and Regards,
SriniHello,
Since I haven't heard from any one, I have opened a service request with Oracle support.
Support recommended that I down load a desktop publisher from edelivery.oracle.com but even that didn't help.
Will keep you posted.
Regards,
Srini -
Run-time Error '429' when copying queries from one userid to a new userid
Hello,
One of the users is having an issue when copying queries from an old user id to a new user id.
She is getting the visual basic run-time error '429' - active x component can't create object while copying.
This is not consistent. From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
Please let me know either way. I have found minimal posts on this issue. Most that I have found are outside the sdn forum and talk about registry issues?
Thank you,
LyndaAccording to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{ -
How to debug a run time error encountered while executing ZFunction Module
Hi all,
My requirement is to create a ZFunction Module that Generated a sales order
for multiple line items and works for both Variant Configurable material and a Normal Material.
I am using BAPI_SLSTRANSACT_CREATEMULTI in my Zfunction Module to create a
Sales order
My ZFunction Module works well if I give normal material as input.
It also works well and generates a sales order if I give all Variant Configurable materials as input.
But if I give both Variant Configurable material and a normal material it throws a run time error.
Can some one tell me what is wrong? can some one suggest me how to debug this run time error
Termination occurred in the ABAP program "SAPLCRM_CONFIG_OW" - in
"CONFIG_TO_CBASE".
The main program was "RS_TESTFRAME_CALL ".
In the source code you have the termination point in line 63
of the (Include) program "LCRM_CONFIG_OWF02".
Source Code Extract
Line SourceCde
| 33| LT_CUXI_CUPRT
| 34| LT_CUXI_CUVAL
| 35| LT_CUXI_CUVK
| 36| LS_CUXI_CUCFG.
37
| 38| PERFORM CREATE_PRICING_CSTIC USING IS_CONFIG-CUCFG-CFGINFO.
39
| 40|* set config to cbase
| 41| CALL FUNCTION 'COM_CUXI_SET_SINGLE_CFG'
| 42| EXPORTING
| 43| I_CFG_HEADER = LS_CUXI_CUCFG
| 44| I_ROOT_INSTANCE = CV_INT_OBJ_NO
| 45| I_LOGSYS = LV_LOGSYS
| 46| IMPORTING
| 47| E_ROOT_INSTANCE = CV_INT_OBJ_NO
| 48| TABLES
| 49| I_TAB_INSTANCES = LT_CUXI_CUINS
| 50| I_TAB_PART_OF = LT_CUXI_CUPRT
| 51| I_TAB_VALUES = LT_CUXI_CUVAL
| 52| I_TAB_VAR_KEYS = LT_CUXI_CUVK
| 53| I_TAB_RESTRICTIONS = LT_CUXI_CURES
| 54| EXCEPTIONS
| 55| INVALID_INSTANCE = 1
| 56| INTERNAL_ERROR = 2
57
OTHERS = 3. 58
| 59| IF SY-SUBRC <> 0.
| 60| if sy-msgno is initial.
| 61| MESSAGE X010 WITH 'COM_CUXI_SET_SINGLE_CFG'.
| 62| else.
|>>>>>| MESSAGE ID SY-MSGID TYPE 'X' NUMBER SY-MSGNO
| 64| WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
| 65| endif.
| 66| ENDIF.
67
| 68|ENDFORM. " CONFIG_TO_CBASEHey Amit...
Can I Create a Sales order for VC and Non VC items using BAPI_SLSTRANSACT_CREATEMULTI
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI
I am trying to create a Sales Order using a Zprogram. I have used BAPI_SLSTRANSACT_CREATEMULTI. If I give the input as Normal material I am able to generate a sale order. If I give the input as VC material I am able to generate a sales order. But if I give both VC and Normal material as input, I get a run time error as follows.
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI that we cannot create a sales order with both VC and Non-VC items or am I missing some data which I need to pass when I give both VC and Non VC items? I get this error only for my Zprogram. But if I try to create an order on screen manually I donu2019t get any error. This happens only if I create an order with my Zprogram.
Some one please help me u2026I am just stuggling to get this doneu2026
I dint find any posts that gives me information about this error.
CUX1 034 u201CNo root instance found in header datau201D
In the source code you have the termination point in line 63 of the (Include) program "LCRM_CONFIG_OWF02". -
Run time error occured while clicking the Log off
Hello Experts,
I have customized masthead file. In the masthead, when i click the log off link, the pop-up window will showing the Runtime error message. Its not working properly. I didnt make any changes in log off method. I traced the error,
<%if (!isPreview){%>
if (EPCM.getUAType() == EPCM.MSIE)
if(EPCM.getGlobalDirty())
// unsaved data on the page, display modified dialog
var val = window.showModalDialog('<%=GetLogoffConfirmUnsavedMsgURL(componentRequest)%>', '', '<%=LOGOFF_CONFIRM_MSG_ARGS_IE%>');
if (val == 'logoff')
disableWorkProtectCheck = true;
logoff();
else //no unsaved data
// data saved, nothing get lost on the page, display normal dialog
var val = window.showModalDialog('<%=GetLogoffConfirmMsgURL(componentRequest)%>', '', '<%=LOGOFF_CONFIRM_MSG_ARGS_IE%>');
if (val == 'logoff')
logoff();
else
if(EPCM.getGlobalDirty())
window.open('<%=GetLogoffConfirmUnsavedMsgURL(componentRequest)%>', '<%=LOGOFF_CONFIRM_WINDOW_NAME%>', '<%=LOGOFF_CONFIRM_MSG_ARGS_NS%>');
else
window.open('<%=GetLogoffConfirmMsgURL(componentRequest)%>', '<%=LOGOFF_CONFIRM_WINDOW_NAME%>', '<%=LOGOFF_CONFIRM_MSG_ARGS_NS%>');
<%}%>
In this code having if condition if(EPCM.getGlobalDirty()) is set as true means, then only properly executed and it shows the Log off message. In my part it goes to the else part. Then it shows run time error message.
I cannt able to find out the solution.Pls help me in this regarding.
Regards
Prakash THi,
see if running SFC /Scannow helps. This basically restores missing/corrupt system files.
Click Start/Run and type CMD
Type SFC /Scannow
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):
http://support.microsoft.com/kb/310747/EN-US/
Please Reward Points if Helpful.
Kind Regards,
Vamsi. -
Getting Error ASSERTION_FAILED while activating transformation.
Hi Experts,
I am getting an error "The ASSERT condition was violated" while activating a transformation in BI. I applied SAP NOTE 1137447 and I am still getting this error given below.
Runtime Errors ASSERTION_FAILED
Date and Time 09.10.2009 16:53:20
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
Trigger Location of Runtime Error
Program CL_RSTRAN_FOBU_APPL===========CP
Include CL_RSTRAN_FOBU_APPL===========CM007
Row 37
Module type (METHOD)
Module Name GET_CODE
Line SourceCde
7 l_formula_id_32 TYPE sfbeid,
8 l_s_fobu TYPE rsfob_s_formula,
9 l_r_formula TYPE REF TO cl_foev_formula.
10
11
12 IF p_r_formula IS BOUND AND
13 p_mode is not initial.
14 CALL METHOD cl_rsar_formulas=>reset_formula_foev_object
15 EXPORTING
16 i_formex = p_formex
17 i_objvers = p_objvers
18 i_r_formula = p_r_formula
19 EXCEPTIONS
20 no_entry = 1
21 invalid = 2
22 OTHERS = 3.
23 ASSERT sy-subrc = 0. "invalid call
24
25 ENDIF.
26
27 CALL METHOD cl_rsar_formulas=>get_formula_foev_object
28 EXPORTING
29 i_formex = p_formex
30 i_objvers = p_objvers
31 RECEIVING
32 r_r_formula = l_r_formula
33 EXCEPTIONS
34 no_entry = 1
35 invalid = 2
36 OTHERS = 3.
>>>>> ASSERT sy-subrc = 0. "invalid call
38
39
40 l_r_formula->compile( EXPORTING i_structure_prefix = 'SOURCE_FIELDS'
41 IMPORTING e_abap_formula = e_t_abap_source ).
42
43 ENDMETHOD.
Kindly help me.
Thanks in advance,
With Kind Regards,
Kannan JagadeesanTry applying the following OSS Notes:
[OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
[OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17). -
Run time error during message mapping transformation
Hello,
i created a scenario and tried to execute . i got this error .
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception:[java.lang.RuntimeException: Error: Occurred in RFC Look UpPlain exception:Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ] in class com.sap.xi.tf._XiameterBasicRegistration_MM_ method crmRfcLookUp$[, , , , Test_ReceiverSystem, , com.sap.aii.mappingtool.tf3.rt.Context@26dd0a50]
can any one tel me wats going wrong ??The error shows that you are using business system and comm. channel in UDF for doing some processing. The error is because it is not able to locate the specified comm channel for the business sytem.
please check if the comm. channel name and business system names are spelled correctly. Also you can try refreshing the CPA cache/ XI cache. -
I am new to DAQmx and .NET.
In my application I need to activate a clock out on counter 2 (HW pci 16 E 4).
I went through all the steps like the sampling examples but instead of Analog input
I used counter output , and setup the pulse ratios.
When I click the switch in the user interface ( a user control databinded to the clock output)
the output works. Since I need to activate it programmatically I tried to call the daQmxUserControl11.Start()
method but this causes the following error :
An unhandled exception of type 'NationalInstruments.DAQmx.DaqException' occurred in nationalinstruments.daqmx.dll
Additional information: Specified operation cannot be performed while the task is running.
Task Name: DAQmxTask1
Status Code: -200479
Any ideas on what am I doing wrong?
Thanks DavidThanks a lot,
I also discovered that dragging the user control onto my user interface doesn't allow alternate activation.
( I actually tried stopping and then starting but the result was the same )
Calling the routines as indicated in the header comments also gave some hiccups ( I had to remark some code to get the system working progrtammatically.
public void Start()
#region Update UI
this.switch1.Caption = "On";
this.switch1.Value = true;
#endregion
daqmxTask.Start();
public void Stop()
#region Update UI
this.switch1.Caption = "Off";
this.switch1.Value = false;
#endregion
daqmxTask.Stop();
#region Methods -
Category ABAP Programming Error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
ABAP Program ZMM_MIGO_GOODS_ISSUE
Application Component Not assigned
Date and Time 26.05.2014 14:28:30
Short Text
"C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception has occurred which is explained in more detail below. The
exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
in procedure
"%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated thisHI CHIRUI,
I have changed and tried but still i a getting the same thing..
otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
DATA : BEGIN OF IT_DATA OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Material Slip No
DEL_NOTE(16), " delivery note
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
BWART TYPE RM07M-BWARTWA, " Movement Type
SOBKZ(1), " Special Stock
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
PS_POSID TYPE PS_POSID, " WBS Element
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
SERNR TYPE RIPW0-SERNR, " Serial Number
END OF IT_DATA,
BEGIN OF IT_HEAD OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Reference document number
"HEADER_TXT(25), " Header Text
BWART TYPE RM07M-BWARTWA, " Movement Type
END OF IT_HEAD,
BEGIN OF IT_ITEM OCCURS 0,
ID(10),
"ID1(10),
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
VAL_TYPE TYPE BWTAR_D,
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
CHARG TYPE MSEG-CHARG, " Batch
BWTAR TYPE BWTAR_D,
PS_POSID TYPE PS_POSID, " WBS Element
ERFME TYPE MSEG-ERFME, " Unit
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
CUSTOMER TYPE EKUNN, " Account Number of Customer
SERNR TYPE RIPW0-SERNR, " Serial Number
AMOUNT_LC TYPE BAPI_EXBWR,
SOBKZ(1),
END OF IT_ITEM,
HEADER LIKE BAPI2017_GM_HEAD_01,
CODE LIKE BAPI2017_GM_CODE,
ITEMS LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
SERIAL LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
RETURN LIKE BAPI2017_GM_HEAD_RET,
RET LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
TESTRUN LIKE BAPI2017_GM_GEN-TESTRUN,
IT_TAB TYPE FILETABLE,
GD_SUBRC TYPE I,
L_FILE TYPE RLGRAP-FILENAME,
IT_RAW TYPE TRUXS_T_TEXT_DATA,
COUNT(2) TYPE N,
TEXT_C(30).
DATA: DATA LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
* p_test AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
CHANGING
FILE_TABLE = IT_TAB
RC = GD_SUBRC.
READ TABLE IT_TAB INTO P_FILE INDEX 1.
START-OF-SELECTION.
PERFORM GET_EXCEL_DATA.
PERFORM GET_HEADER_ITEM.
PERFORM UPDATE_DATA.
*& Form GET_EXCEL_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_EXCEL_DATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = P_FILE
IMPORTING
OUTPUT = L_FILE.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_LINE_HEADER = 'X'
I_TAB_RAW_DATA = IT_RAW
I_FILENAME = L_FILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_EXCEL_DATA
*& Form GET_HEADER_ITEM
* text
* --> p1 text
* <-- p2 text
FORM GET_HEADER_ITEM .
DATA : FLAG(1).
LOOP AT IT_DATA.
CLEAR FLAG.
IF IT_DATA-ID IS NOT INITIAL.
AT NEW ID.
FLAG = 'X'.
ENDAT.
ENDIF.
IF FLAG = 'X'.
MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
APPEND IT_HEAD.
ENDIF.
MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
APPEND IT_ITEM.
ENDLOOP.
DATA[] = IT_ITEM[].
IT_TEMP[] = IT_ITEM[].
IT_TEMP1[] = IT_ITEM[].
ENDFORM. " GET_HEADER_ITEM
*& Form UPDATE_DATA
* text
* --> p1 text
* <-- p2 text
FORM UPDATE_DATA .
DATA : COUNT1(10),
L_QTY TYPE I,
DAT(10).
CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
LOOP AT IT_HEAD.
ON CHANGE OF IT_HEAD-ID.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BUDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-PSTNG_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BLDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-DOC_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE : '2' TO HEADER-VER_GR_GI_SLIP,
'X' TO HEADER-VER_GR_GI_SLIPX.
* IF r1 EQ 'X'.
MOVE '05' TO CODE-GM_CODE.
HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
"HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
* ELSEIF r2 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ELSEIF r3 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ENDIF.
* IF p_test = 'X'.
* MOVE 'X' TO testrun.
* ENDIF.
ENDON.
IT_ITEM1[] = IT_ITEM[].
*delete it_item[] where werks = '' and id = it_head-id.
DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
* ON CHANGE OF it_item-id1.
COUNT1 = COUNT1 + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = IT_ITEM-MATNR
IMPORTING
OUTPUT = ITEMS-MATERIAL.
MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
IT_ITEM-LGORT TO ITEMS-STGE_LOC,
* it_item-lgort1 TO items-move_stloc,
IT_ITEM-CHARG TO ITEMS-BATCH,
* IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
'FRESH' TO ITEMS-VAL_TYPE,
IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
* it_item-erfme TO items-entry_uom,
* it_item-sgtxt TO items-item_text,
* it_item-exbwr TO items-amount_lc,
IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
"IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
IT_ITEM-ERFMG TO L_QTY,
IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
IT_ITEM-ORDER TO ITEMS-ORDERID.
* items-SPEC_MVMT = 'R'.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-WBS_ELEM
IMPORTING
OUTPUT = ITEMS-WBS_ELEM.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-VAL_WBS_ELEM
IMPORTING
OUTPUT = ITEMS-VAL_WBS_ELEM.
* CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
* EXPORTING
* input = it_item-lifnr
* IMPORTING
* output = items-vendor.
APPEND ITEMS.
* ENDON.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
DATA: MAT_ITM TYPE MBLPO,
SERNP TYPE SERAIL.
MAT_ITM = '0001'.
LOOP AT IT_TEMP.
SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
IF SERNP IS NOT INITIAL.
LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
* MOVE : it_item1-id TO serial-matdoc_itm,
* MOVE : mat_itm TO serial-matdoc_itm,
SERIAL-MATDOC_ITM = MAT_ITM .
SERIAL-SERIALNO = IT_TEMP1-SERNR.
APPEND SERIAL.
CLEAR IT_ITEM1.
ENDLOOP.
MAT_ITM = MAT_ITM + 1.
ENDIF.
CLEAR IT_TEMP.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = HEADER
GOODSMVT_CODE = CODE
TESTRUN = TESTRUN
* GOODSMVT_REF_EWM =
IMPORTING
GOODSMVT_HEADRET = RETURN
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
TABLES
GOODSMVT_ITEM = ITEMS
GOODSMVT_SERIALNUMBER = SERIAL
RETURN = RET
* GOODSMVT_SERV_PART_DATA =
* EXTENSIONIN =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
* IMPORTING
* RETURN =
IF NOT RETURN IS INITIAL.
WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
ELSE.
LOOP AT RET.
WRITE : RET-TYPE, RET-MESSAGE.
* log-index = sy-index.
* log-matnr = header-material.
* log-message = ret1-message.
* APPEND log.
ENDLOOP.
ENDIF.
REFRESH : ITEMS,RET.
CLEAR : HEADER,RETURN.
CLEAR: TESTRUN ,
RETURN,
ITEMS[],
SERIAL[],
RET[],
HEADER,
IT_TEMP[] ,
IT_TEMP1[].
IT_TEMP[] = DATA[].
IT_TEMP1[] = DATA[].
ENDLOOP.
ENDFORM. " UPDATE_DATA
Regards,
Suresh bheema -
Run time Error DBIF_RSQL_SQL_ERROR while logging and executing some tcodes
Hi all,
Hi all,
When i try to login into my system (ECC 6.0 with Oracle DB), i have been directed to dump -->
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Missing RAISING Clause in Interface
Program SAPFSDS1
Include FSDS1E01
Row 365
Module type (FORM)
Module Name TRANSFORM_NEW_OLD
Trigger Location of Exception
Program SAPFSDS1
Include FSDS1E01
Row 380
Module type (FORM)
Module Name TRANSFORM_NEW_OLD
In the source code the the cause for the error is shown in the below line"
SELECT SINGLE * FROM TDCLD
WHERE DOKCLASS EQ DOKCLASS.
"How to correct the error"
Database error text........: "ORA-32255: Message 32255 not found;
product=RDBMS; facility=ORA#"
Internal call code.........: "RSQL/READ/TDCLD "
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be abl
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the follo
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPFSDS1" or "FSDS1E01"
"TRANSFORM_NEW_OLD"
When i tried to look for the error ORA-32255, i am unable to get any information regarding this?
Could you please suggest me..
I have made the following changes trying to solve the error:
shared_pool_size = 401832601 and
i have executed sql command --> alter system set "_object_statistics"=false scope=spfile;
Message from Alert Log file:
Incremental checkpoint up to RBA [0x1076.10c61.0], current log tail at RBA [0x1076.10e4d.0]
Message from dev_w0 file:
OCI-call failed with -1=OCI_ERROR
C SQL error 32255: 'ORA-32255: Message 32255 not found; product=RDBMS; facility=ORA
C '
C *** ERROR => Error 32255 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12720]
C *** ERROR => ORA-32255 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12739]
C sc_p&H05B11F10,no&H110,idc_p&H00000000,con=0,act=1,sle n&H103,smax&H256,#vars=2,stmt
8718D8,table=ATAB
C SELECT "TABNAME" , "VARKEY" , "DATALN" , "VARDATA" FROM "ATAB" WHERE "TABNAME" = :A0 AND "VARKEY" = \
C :A1;
C sc_p&H05B11F10,no&H110,idc_p&H00000000,con=0,act=1,sle n&H103,smax&H256,#vars=2,stmt
8718D8,table=ATAB
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p &H00000000,ocistmth_p
872784
C IN : cols=2,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rs ize&H28,vmax&H32,bound=1,iobuf_p&H05BF4F28,vda_p
873CA8
C lobs=0,lmax=0,lpcnt=0,larr&H00000000,lcurr_p&H0000000 0,rret=0
C OUT: cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rs ize&H124,vmax&H32,bound=1,iobuf_p&H05BEBAF8,vda_p
874118
C lobs=0,lmax=0,lpcnt=0,larr&H00000000,lcurr_p&H0000000 0,rret=0
C SELECT "TABNAME" , "VARKEY" , "DATALN" , "VARDATA" FROM "ATAB" WHERE "TABNAME" = :A0 AND "VARKEY" = \
C :A1;
B ***LOG BY4=> sql error 32255 performing SEL on table ATAB [dbtran#11 @ 7512] [dbtran 7512 ]
B ***LOG BY0=> ORA-32255: Message 32255 not found; product=RDBMS; facility=ORA
[dbtran#11 @ 7512] [dbtran 7512 ]
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B RSLT: {dbsl=99, tran=1}
B FHDR: {tab='ATAB', fcode&H17, mode=2, bpb=0, dbcnt=0, crsr=0,
B hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
B init:p&H00000000, init:#=0, wa:p=0X031902F0, wa:#&H15000}
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B STMT:
B CRSR: {tab='', id=0, hold=0, prop=0x80000, max.in@0=1, fae:blk=0,
B con:id=0, con:vndr=5, val=2,
B key:#=2, xfer=0, xin:#=1, row:#=0, upto=1, wa:p=0X031902F0}
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sun Apr 05 22:38:04 2009
A
A ABAP Program SAPFSDS1 .
A Source FSDS1E01 Line 380.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#9 $ SAP.
A Function HandleRsqlErrors Line 778.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
A
I have started the local client copy and have stopped it in the middle. i have logged off and tried to login again, this is the start of the dump.
I am unable to resolve it. PLEASE give a solution
Thanks & Regards,
Subbu.Hi Subbu,
We were in touch when you previously posted this, but somehow I got an error when I tried to access the thread. I remember that your DB was still 10.2.0.1 and that this may have caused a corruption. The only explanation for ORA-32255 that looks remotely interesting is that it may occur with the OCI (Oracle Call Interface) accessing a NULL LOB (and ATAB does contain a LOB field). Do you have any chance of upgrading the database where you have the problem to 10.2.0.4?
I don't know whether we'll learn anything useful from this (you might just get an ORA-32255 again) but could you execute the following statement in SQLPLUS:
select count(*) from <sapuser>.ATAB where VARDATA IS NULL;
(replace <sapuser> with the name of the SAP schema owner)
Regards,
Mark -
Time_out & TSV_TNEW_PAGE_ALLOC_FAILED Run time error on MB5B
Hi expert,
Time_out & TSV_TNEW_PAGE_ALLOC_FAILED Run time error getting while executing Tx-MB5B.
ECC 6.0
oracle 10g
HPux
Regards,Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 08.02.2012 14:50:11
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "\PROGRAM=RM07MLBD\DATA=G_T_COLOR" could not be further
extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 76
Number of rows: 3
Allocated rows: 3
Newly requested rows: 128 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 5720752
Extended memory (EM)........... 502807584
Assigned memory (HEAP)......... 1842267952
Short area..................... " "
Paging area.................... 40960
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"RM07MLBD" or "RM07MLBD"
"COLORIZE_TOTALS_FLAT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error. -
Reg:Run time error in cjv4
Hi,
I am getting run time error during transfer of project from
a)version --->version
b)Version--->operative
Can anybody suggest some notes to resolve this issue.
With Regards
Rohit PrakashHi,
I have found following error type:-
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "CO_LA_OPER_SEQ_PRE_READ_DB_VER" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"TPLNR" does not exist in any of the database tables from the FROM clause.
With Regards
Rohit Prakash -
SAP Gui 6.40 BeX Analyser problem (Run Time Error)
Dear All
Really need some help
We get the following error in EXCEL 2003 when running transaction rrmx from SAP easy access:
Run time error 91 Object variable or with block variable not set
When debugging we get the following error message:
call pAddin.SetConnectionFromHandle(p_connectionObj).
We've rolled out the same package globally to all our users, some machines have this problem and some don't - which has been making this very difficult to resolve and troubleshoot.
We've tried patch level 29 of the GUI and this did not resolve.
I've read lots of threads relating to the .net framework and made sure all the service packs are installed, and also tried .net framework 2.0 and 3.0 - the problem still existed with both.
I'm really stuck and appreciate any guidance.
If we manually launch Analyzer (SAP BW 3.x) from the start menu, EXCEL and the BW add-in works fine... we only get the run time error when using transaction rrmx from SAP GUI.
Please help!
Thanks.OK, so I've done the following - which DID work and i no longer get the RUN TIME error:
-uninstalled SAPGUI
-uninstalled Office 2003
-uninstalled all .net framework versions + updates.
-install .net framework 2.0 with SP1
-install microsoft office 2003 + SP3
install sap gui 6.40 + patch level 29
However, if anyone out there has got an easier and quicker solution to this problem I'd REALLY appreciate it. I have got lots of our users with this problem and it took a long time to complete all the steps above.. there must be something easier to do to fix this...
thanks for your help -
Run time error while logging from a client
hi all,
My server is connected to 10 clients. out of that 2 clients are suddenly showing error while logging.
Microsoft visual studio C++(error window)
run tme error
debug
error c:/program files/sap/sap business one/sapbusiness one.exe
This is the error window showing. I have uninstalled the client and again installed it but with no results. I found in the path mentioned above there should be the client run file "sap business one.exe", which is not present. I mean the .exe is missing. the file shows "sap business one" only.
whenever we install the client then i the folder
c:/program files/sap/sap business one
there is a .exe file. which is not being installed in this client machine. what is being installed is a
sap business one (not a .exe)
when the client icon in the desktop is made to run, the log in screen appears, the list of company and db appears. I have recently upgraded the server to PL 42. so when a company is selected for log in then the client upgrade message also appears. when "ok" is clickd the run time error appears.
where as all other clients are running well after the upgrade.
please help with a solution.
regards,
Raj
Edited by: debraj bhattacharyya on Dec 5, 2008 5:37 PMI have explored all the areas and I hope the problem is with the exe file only. Because I have tried an option. I copied the entire file SAP Business One (in the C:
Program Files\sap) from one client which is working to the client where the error was showing. Then the it started working properly.
But I donot think this will be a permanent solution. Because on reinstaling the client the SAPBusiness One.exe does not appear and to the best of my research i am quite sure that may be the problem.
Any idea from any one for a perfect reason.
Regards,
Raj
Maybe you are looking for
-
Error message when trying to install snow leopard
Hello, I just tried to install snow leopard version 10.6 and get an error message mid installation that kicks the cd out of the drive and stalls. I can't complete the installation. I have a macbook pro 1,1 with 1.83 ghz processor with 1gb of ram and
-
Why do my audio files constantly corrupt and slip out of sync?
Whether using .caf or .aif (no MP3 audio), I get this strange issue were audio is randomly slipping out of sync. If I use the slip tool to scrub the audio track, I can usually hear an audible digital hit in the file. For example, I placed an explos
-
Quadro 4000 dvi-d to hdmi 1.4 tv as monitor please
hello, i am looking into a monitor solution to start doing 3d work 3d tv's these days seem to have hdmi 1.4 however quadro 4000 only has display port and dvi-i dual link and i can't seem to locate a correct adapter so i'm wondering if anyone has a so
-
Why is VO getter not called for custom VO attributes?
Hi, The requirement is to add couple of fields on a OAF page. Here is what I did: - Created custom VO by extending the standard VO - Added fields to the page via personalization. The issue is that the values for the custom fields on the page were not
-
JDEV 10.1.3 build 3565 database diagram error
The cardinality is inverted on the diagram when a table is referenced from an another schema. To reproduce 1) create a table with a primary key 2) change the schema by your own 3) don't change the default schema for the project ! 4) create an another