Run time error equals shortdumps

Hi ALL,
While monitoring  SM21 & ST22 , we crosscheck that,
NO of "run time errors" in SM21 which should match equal  to the  NO of "short dumps" in ST22 for that   particular date.
Today i am getting 9 run time errors & 8 short dumps. 1 run time error is not been displayed in ST22
What could be the reason? Pl let me know ASAP.
Thanks & regards
Rajendra Tattu

are you using APPS servers?
not all runtime errors will result in an aBAP dump.

Similar Messages

  • While doing SO, im getting run time error - reg;

    Hi,
    While doing sales order and whenever im doing save its  getting runtime error.
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          14.12.2011 10:55:26
    Short dump has not been completely stored (too big)
    Short text
        The current application triggered a termination with a short dump.
    What happened?
        The current application program detected a situation which really
        should not occur. Therefore, a termination with a short dump was
        triggered on purpose by the key word MESSAGE (type X).
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        Short text of error message:
        Maintain the current CRM release (table CRMPAROLTP)
        Long text of error message:
         Diagnosis
             Various transfer errors occur when transferring SAP sales orders to
             CRM or there is no status update or the status update has errors
             when transferring from CRM to the SAP system. This is caused by an
             incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
             no entry is maintained at all.
         System Response
             To avoid data inconsistencies, this message causes a short dump.
         Procedure
             Maintain table CRMPAROLTP in your SAP system as is described in SAP
             Note 691710 and then repeat the process again.
         Procedure for System Administration
        Technical information about the message:
        Message class....... "V3"
        Number.............. 302
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          14.12.2011 10:55:26
    hort dump has not been completely stored (too big)
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
        "BAPIDATEN_ERMITTELN"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.
    System environment
        SAP-Release 700
        Application server... "personal"
        Network address...... "192.168.2.11"
        Operating system..... "Windows NT"
        Release.............. "5.2"
        Hardware type........ "4x Intel 80686"
        Character length.... 16 Bits
        Pointer length....... 32 Bits
        Work process number.. 1
        Shortdump setting.... "full"
        Database server... "PERSONAL"
        Database type..... "ORACLE"
        Database name..... "GCU"
        Database user ID.. "SAPSR3"
        Char.set.... "C"
        SAP kernel....... 700
        created (date)... "Aug 29 2006 00:18:21"
        create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
        Database version. "OCI_10201_SHARE (10.2.0.1.0) "
        Patch level. 75
        Patch text.. " "
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          14.12.2011 10:55:26
    hort dump has not been completely stored (too big)
        Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
        SAP database version. 700
        Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
        Memory consumption
        Roll.... 8176
        EM...... 30311496
        Heap.... 0
        Page.... 139264
        MM Used. 14538320
        MM Free. 91952
    User and Transaction
        Client.............. 100
        User................ "INFO_SD"
        Language key........ "E"
        Transaction......... "VA01 "
        Program............. "SAPMV45A"
        Screen.............. "SAPMV45A 4001"
        Screen line......... 65
    Information on where terminated
        Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
        The main program was "SAPMV45A ".
        In the source code you have the termination point in line 338
        of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
    Edited by: kiran35086 on Dec 14, 2011 6:30 AM

    Dear  kiran,
    This might be many reasons.If you have not done  configuration properly system will take you to dump(Run time error).
    Try read the diagnosis possibly you may understand the problem.
    If not You coordinate with your technical team.
    Thanks&Regards
    Raghu.k

  • ABAP run time error

    Dear ALL,
    When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
    we are getting following run time error
    Hoe to resolve this?
    Runtime Errors         SAPSQL_INVALID_FIELDNAME                                                    
    Except.                CX_SY_DYNAMIC_OSQL_SEMANTICS                                                
    Date and Time          15.01.2009 16:04:19                                                         
    Short dump has not been completely stored (too big)                                                                               
    Short text                                                                               
    A dynamically specified column name is unknown.                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLV61Z" had to be terminated because it has                       
        come across a statement that unfortunately cannot be executed.                                
    What can you do?                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                        
        administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   
        at and manage termination messages, and you can also                                          
        keep them for a long time.                                                                    
    Error analysis                                                                               
    An exception occurred that is explained in detail below.                                      
        The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was                 
         not caught in                                                                               
    procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.                  
        Since the caller of the procedure could not have anticipated that the                         
        exception would occur, the current program is terminated.                                     
        The reason for the exception is:                                                              
        An Open SQL clause was specified dynamically. The contained field name                        
        "ALAND" does not exist in any of the database tables from the FROM clause.                    
    How to correct the error                                                                               
    Check the field name in the SELECT clause.                                                                               
    If the error occures in a non-modified SAP program, you may be able to                        
        find an interim solution in an SAP Note.                                                      
        If you have access to SAP Notes, carry out a search with the following                        
        keywords:                                                                               
    "SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"                                     
        "SAPLV61Z" or "LV61ZU01"                                                                      
        "SEL_KONDTAB"                                                                               
    If you cannot solve the problem yourself and want to send an error                            
        notification to SAP, include the following information:                                                                               
    1. The description of the current problem (short dump)                                                                               
    To save the description, choose "System->List->Save->Local File                            
        (Unconverted)".                                                                               
    2. Corresponding system log                                                                               
    Display the system log by calling transaction SM21.                                        
           Restrict the time interval to 10 minutes before and five minutes                           
        after the short dump. Then choose "System->List->Save->Local File                             
        (Unconverted)".                                                                               
    3. If the problem occurs in a problem of your own or a modified SAP                           
        program: The source code of the program                                                       
           In the editor, choose "Utilities->More                                                     
        Utilities->Upload/Download->Download".                                                                               
    4. Details about the conditions under which the error occurred or which                       
        actions and input led to the error.                                                                               
    The exception must either be prevented, caught within proedure                                
        "SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the                    
        RAISING clause of the procedure.                                                              
        To prevent the exception, note the following:                                                 
    System environment                                                                               
    SAP-Release 700                                                                               
    Application server... "slgsap-prd"                                                            
        Network address...... "10.140.1.11"                                                           
        Operating system..... "Windows NT"                                                            
        Release.............. "5.2"                                                                   
        Hardware type........ "8x AMD64 Level"                                                        
        Character length.... 16 Bits                                                                  
        Pointer length....... 64 Bits                                                                 
        Work process number.. 0                                                                       
        Shortdump setting.... "full"                                                                               
    Database server... "SLGSAP-PRD"                                                               
        Database type..... "MSSQL"                                                                    
        Database name..... "PRD"                                                                      
        Database user ID.. "prd"                                                                               
    Terminal................. "SD0123l"                                                                               
    Char.set.... "C"                                                                               
    SAP kernel....... 700                                                                         
        created (date)... "May 6 2008 00:13:21"                                                       
        create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"                              
        Database version. "SQL_Server_8.00 "                                                                               
    Patch level. 159                                                                               
    Patch text.. " "                                                                               
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"                              
        SAP database version. 700                                                                     
        Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows                
         NT 6.0"                                                                               
    Memory consumption                                                                               
    Roll.... 16192                                                                               
    EM...... 20949200                                                                               
    Heap.... 0                                                                               
    Page.... 196608                                                                               
    MM Used. 15928048                                                                               
    MM Free. 828016                                                                               
    User and Transaction                                                                               
    Client.............. 900                                                                      
        User................ "ADMIN"                                                                  
        Language key........ "E"                                                                      
        Transaction......... "VA01 "                                                                  
        Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"                                                                               
    Program............. "SAPLV61Z"                                                               
        Screen.............. "SAPMV45A 4900"                                                          
        Screen line......... 930                                                                      
    Information on where terminated                                                                   
        Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".                       
        The main program was "SAPMV45A ".                                                                               
    In the source code you have the termination point in line 672                                 
        of the (Include) program "LV61ZU01".                                                          
        The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"                    
         occurred in                                                                               
    procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor                      
         declared                                                                               
    in the RAISING clause of its signature.                                                                               
    The procedure is in program "SAPLV61Z "; its source code begins in line                       
        260 of the (Include program "LV61ZU01 ".                                                      
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    642     if se_prestep              = yes or                                                     
      643        se_read_only_one_record = yes.                                                       
      644       if t681-ksdat is initial.                                                             
      645         if se_read_all_prestep is initial.                                                  
      646           select * from (t681-kotab) appending table <cond_tab>                             
      647                  up to 1 rows                                                               
      648                  where kappl  = se_kappl                                                    
      649                  and   kschl  = se_kschl                                                    
      650                  and   (coding_tab).                                                        
      651           h_subrc = sy-subrc.                                                               
      652         else.                                                                               
    653           select * from (t681-kotab) appending table <cond_tab>                             
      654                  where kappl  = se_kappl                                                    
      655                  and   kschl  = se_kschl                                                    
      656                  and   (coding_tab).                                                        
      657         endif.                                                                               
    658                                                                               
    659 * it is enough to find one record in prestep                                                
      660 * (care must be taken with pool tables - depending on database this                         
      661 *  will cost performance instead of saving)                                                 
      662         if select_split ne 0 and h_subrc ne 0.                                              
      663           modify coding_tab from coding_alter index select_split.                           
      664           select * from (t681-kotab) appending table <cond_tab>                             
      665                  up to 1 rows                                                               
      666                  where kappl  = se_kappl                                                    
      667                  and   kschl  = se_kschl                                                    
      668                  and   (coding_tab).                                                        
      669         endif.                                                                               
    670       else.                                                                               
    671         if se_read_all_prestep is initial.                                                  
    >>>>>           select * from (t681-kotab) appending table <cond_tab>                             
      673                  up to 1 rows                                                               
      674                  where kappl  = se_kappl     
    Regards,
    Akshay
    Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
    Edited by: Akshay Dalal on Jan 17, 2009 6:30 AM

    Dear Akshay,
    We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
    Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
    There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
    Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
    Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely.

  • Getting run time errors while executing the copied SAP programs

    Hi folks,
    i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
    i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include  programs.i am copying them to z programs like
    RQ00MF10 copied to z_RQ00MF10
    RQALVF14 copied to z_RQALVF14
    RQALVF16 copied to z_RQALVF16
    RQALVTOP copied to z_RQALVTOP.
    now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
    <b>runtime error---</b>
    The termination occurred in the ABAP program "Z_RQEEAL10" in           
    "SELECT_FIELDS_MANIP2_F16".                                           
    The main program was "Z_RQEEAL10 ".                                                                               
    The termination occurred in line 257 of the source code of the (Include)
    program "RQALVF16"                                                    
    of the source code of program "RQALVF16" (when calling the editor 2570).
    --Error in ABAP statement when processing an internal table.  
    --When changing or deleting one or more lines of the internal table         
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table   
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as                  
    the line index. An index less than or equal to zero is not                
    allowed.                                                                               
    The error can occur when using the following options:                     
    1. "INDEX idx" for specifying the line number in the table                
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"                                 
       where you want to change, insert or delete.                            
    2. "FROM idx" for specifying the start index when deleting a line         
       area from or inserting a line area into the table                      
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".                                
    3. "TO idx" for specifying the end index when deleting a line             
       area from or inserting a line area into the table                      
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".                                                                               
    When the program terminated, the table had 2 lines.                       
    these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
    Thanks & regards

    Hi Madhu,
    I will give you one more check point where you have to give your concentration while copying the standard programs....
    Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
    one more is also here
    You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
    ~~Guduri

  • Run time error QA32 of QM

    We are geting following run time error when executeing QA32 t-code of QM , error as follows ,
    Error analysis
    After a specific time, the program is terminated to make the work area
    available to other users who may be waiting.
    This is to prevent a work area being blocked unnecessarily long by, for
    example:
    - Endless loops (DO, WHILE, ...),
    - Database accesses with a large result set
    - Database accesses without a suitable index (full table scan)
    The maximum runtime of a program is limited by the system profile
    parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
    time limit is
    exceeded, the system attempts to cancel any running SQL statement or
    signals the ABAP processor to stop the running program. Then the system
    waits another 60 seconds maximum. If the program is then still active,
    the work process is restarted.
    How to correct the error
    Programs with long runtime should generally be started as background
    jobs. If this is not possible, you can increase the system profile
    parameter "rdisp/max_wprun_time".
    Depending on the cause of the error, you may have to take one of the
    following measures:
    - Endless loop: Correct program;
    - Dataset resulting from database access is too large:
    Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
    (for example);
    - Database has unsuitable index: Check index generation.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    Runtime Errors TIME_OUT
    Date and Time 30.06.2009 10:17:31
    Short dump has not been completely stored (too big)
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TIME_OUT" " "
    "SAPLBSVA" or "LBSVAU14"
    "STATUS_PRE_READ"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "GALT"
    Network address...... "202.54.13.238"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "2x Intel 80686"
    Character length.... 8 Bits
    Pointer length....... 32 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "GALT"
    Database type..... "ORACLE"
    Database name..... "PRD"
    Database user ID.. "SAPSR3"
    Char.set.... "English_United State"
    SAP kernel....... 700
    created (date)... "Oct 13 2006 00:08:41"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 80
    Patch text.. " "
    Runtime Errors TIME_OUT
    Date and Time 30.06.2009 10:17:31
    Short dump has not been completely stored (too big)
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8112
    EM...... 16724736
    Heap.... 0
    Page.... 450560
    MM Used. 6688784
    MM Free. 626280
    User and Transaction
    Client.............. 400
    User................ "MGMTSER"
    Language key........ "E"
    Transaction......... "QA11 "
    Program............. "SAPLBSVA"
    Screen.............. "SAPMQEVA 0200"
    Screen line......... 41
    Information on where terminated
    Termination occurred in the ABAP program "SAPLBSVA" - in "STATUS_PRE_READ".
    The main program was "SAPMQEVA ".
    In the source code you have the termination point in line 61
    of the (Include) program "LBSVAU14".
    Source Code Extract
    Line SourceCde
    31
    32 OBJNR_TAB[] = JSTO_PRE_TAB[].
    33
    34 * Merken: jeweils bisherige Anzahl Einträge im Puffer
    35 DESCRIBE TABLE JSTO_BUF LINES JSTO_BUF_LINES.
    36 DESCRIBE TABLE JEST_BUF LINES JEST_BUF_LINES.
    37 DESCRIBE TABLE OBJNR_TAB LINES OBJNR_TAB_LINES. "Note978655
    38 ADD 1 TO JSTO_BUF_LINES.
    39
    40 l_percentage = OBJNR_TAB_LINES * 100 / JSTO_BUF_LINES. "Note978655
    41 * Small number of object numbers to be read, insert records "Note978655
    42 * sequentially to avoid expensive SORT on JSTO_BUF,JEST_BUF "Note978655
    43 IF ( l_percentage <= 1 OR OBJNR_TAB_LINES < 20 ) AND "Note978655
    44 get_change_documents IS INITIAL. "Note978655
    45 LOOP AT objnr_tab. "Note978655
    46 SELECT * FROM JSTO CLIENT SPECIFIED "Note978655
    47 FOR ALL ENTRIES IN OBJNR_TAB "Note978655
    48 WHERE MANDT EQ CLIENT "Note978655
    49 AND OBJNR = OBJNR_TAB-OBJNR. "Note978655
    50 READ TABLE JSTO_BUF WITH KEY MANDT = JSTO-MANDT "Note978655
    51 OBJNR = JSTO-OBJNR "Note978655
    52 BINARY SEARCH. "Note978655
    53 IF SY-SUBRC <> 0. "Note978655
    Runtime Errors TIME_OUT
    Date and Time 30.06.2009 10:17:31
    Short dump has not been completely stored (too big)
    54 JSTO_BUF = JSTO. "Note978655
    55 CLEAR JSTO_BUF-MOD. "Note978655
    56 JSTO_BUF-STSMA_OLD = JSTO_BUF-STSMA. "Note978655
    57 INSERT JSTO_BUF INDEX SY-TABIX. "Note978655
    58 ENDIF. "Note978655
    59 ENDSELECT. "Note978655
    60 "Note978655
    >>>>> SELECT * FROM JEST CLIENT SPECIFIED "Note978655
    62 FOR ALL ENTRIES IN OBJNR_TAB "Note978655
    63 WHERE MANDT EQ CLIENT "Note978655
    64 AND OBJNR = OBJNR_TAB-OBJNR. "Note978655
    65 READ TABLE JEST_BUF WITH KEY MANDT = JEST-MANDT "Note978655
    66 OBJNR = JEST-OBJNR "Note978655
    67 STAT = JEST-STAT "Note978655
    68 BINARY SEARCH. "Note978655
    69 IF SY-SUBRC <> 0. "Note978655
    70 JEST_BUF = JEST. "Note978655
    71 CLEAR JEST_BUF-MOD. "Note978655
    72 JEST_BUF-INACT_OLD = JEST_BUF-INACT. "Note978655
    73 INSERT JEST_BUF INDEX SY-TABIX. "Note978655
    74 ENDIF. "Note978655
    75 ENDSELECT. "Note978655
    76 ENDLOOP. "Note978655
    77 CLEAR: JSTO_BUF,JEST_BUF. "Note978655
    78 EXIT. "Note978655
    79 ENDIF. "Note978655
    80
    Contents of system fields
    Name Val.
    SY-SUBRC0
    SY-INDEX0
    SY-TABIX15
    SY-DBCNT15
    SY-FDPOS1
    SY-LSIND0
    SY-PAGNO0
    SY-LINNO1
    SY-COLNO1
    SY-PFKEYA101
    SY-UCOMMBU
    SY-TITLE Record Usage Decision: Characteristic Overview
    SY-MSGTY
    SY-MSGID
    SY-MSGNO000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO0
    SY-DATUM20090630
    SY-UZEIT101723
    SY-XPROGSAPLQAMB
    SY-XFORMCONVERSION_EXIT
    Edited by: Raghavendra Balegar on Jul 3, 2009 12:21 PM

    No Dear,
    Not at all. I think it should work for atleast one month period.
    But sometimes depending on the database size and hardware, this criteria can vary.
    Regds,
    Anil

  • Run-Time Errors cause wierdness

    I have a remote object call that sends a query string to a
    database. I am trying to catch errors coming from the database
    because of bad sql statements. In my code there is an IF statements
    that checks if the first row returned is an object by trying to
    convert it to a string. If it is not equal to "[object Object]"
    then I know its an error message generated from the database. My
    problem is as soon as I uncomment the IF statement and test my app
    everything begins acting wierd as soon as my app hits that logic.
    Items highlight, tree controls show junk, etc. If I comment out the
    IF everything works fine but I get a alert for rows returned and
    one with the error message. I tried enclosing everything in a try
    catch but there seems to be no run-time error occuring. Has anybody
    else experience wierd things when errors occur?
    private function queryResults(event:ResultEvent):void
    var call:Object = event.token;
    var isError:Boolean = false;
    if( call.state == "FillGrid" )
    results = event.result as ArrayCollection;
    if( results.length == 1 )
    var errMsg:String = results.getItemAt(0).toString();
    //if( errMsg != "[object Object]" )
    Alert.show(errMsg,"Error");
    //isError = true;
    if( !isError)
    results.filterFunction = searchData;
    Alert.show( results.length.toString() + " Rows Returned!
    ","Results");
    SortColumns();
    if( results.length > 0 )
    calculateGrandTotals(results);

    I have adjusted some of the logic in my code and now it works
    fine. I would still like to know what was causing the wierd stuff.
    private function queryResults(event:ResultEvent):void
    var call:Object = event.token;
    var isError:Boolean = false;
    var msg:String = "";
    var msgHeader:String = "Results";
    if( call.state == "FillGrid" )
    var tmpResults:ArrayCollection = event.result as
    ArrayCollection;
    msg = tmpResults.length.toString() + " Rows Returned! ";
    if( tmpResults.length == 1 )
    var errMsg:String = tmpResults.getItemAt(0).toString();
    if( errMsg != "[object Object]" )
    msg = errMsg;
    msgHeader = "Error";
    isError = true;
    Alert.show( msg,msgHeader);
    if( isError == false )
    results = tmpResults;
    results.filterFunction = searchData;
    SortColumns();
    if( results.length > 0 )
    calculateGrandTotals(results);
    }

  • Run time error CONVT_OVERFLOW

    dear Sir
    we have window 7 for new oc as soon runned teh program cv01n i got run time error msg  CX_SY_CONVERSION_OVERFLOW,plese guide
    Runtime Errors         CONVT_OVERFLOW                                                              
    Except.                CX_SY_CONVERSION_OVERFLOW                                                   
    Date and Time          03.05.2010 14:26:31                                                                               
    Short text                                                                               
    Overflow when converting from "-1"                                                           
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLCV120" had to be terminated because it has                     
        come across a statement that unfortunately cannot be executed.                               
    What can you do?                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                       
        administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                  
        at and manage termination messages, and you can also                                         
        keep them for a long time.                                                                   
    Error analysis                                                                               
    An exception occurred that is explained in detail below.                                     
        The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not               
         caught in                                                                               
    procedure "SYS_GET_WINDOW_SYSTEM" "(FORM)", nor was it propagated by a RAISING               
         clause.                                                                               
    Since the caller of the procedure could not have anticipated that the                        
        exception would occur, the current program is terminated.                                    
        The reason for the exception is:                                                             
        When attempting to convert the value "-1", an overflow occurred.                             
    How to correct the error                                                                         
        If the error occurred in your own ABAP program or in an SAP                                  
        program you modified, try to remove the error.                                                                               
    If the error occures in a non-modified SAP program, you may be able to                       
        find an interim solution in an SAP Note.                                                     
        If you have access to SAP Notes, carry out a search with the following                       
        keywords:                                                                               
    "CONVT_OVERFLOW" "CX_SY_CONVERSION_OVERFLOW"                                                 
        "SAPLCV120" or "LCV120F28"                                                                   
        "SYS_GET_WINDOW_SYSTEM"                                                                               
    If you cannot solve the problem yourself and want to send an error                           
        notification to SAP, include the following information:                                                                               
    1. The description of the current problem (short dump)                                                                               
    To save the description, choose "System->List->Save->Local File                           
        (Unconverted)".                                                                               
    2. Corresponding system log                                                                               
    Display the system log by calling transaction SM21.                                       
           Restrict the time interval to 10 minutes before and five minutes                          
        after the short dump. Then choose "System->List->Save->Local File                            
        (Unconverted)".                                                                               
    3. If the problem occurs in a problem of your own or a modified SAP                          
        program: The source code of the program                                                      
           In the editor, choose "Utilities->More                                                    
        Utilities->Upload/Download->Download".                                                                               
    4. Details about the conditions under which the error occurred or which                      
        actions and input led to the error.                                                                               
    The exception must either be prevented, caught within proedure                               
        "SYS_GET_WINDOW_SYSTEM" "(FORM)", or its possible occurrence must be declared                
         in the                                                                               
    RAISING clause of the procedure.                                                             
        To prevent the exception, note the following:                                                
    System environment                                                                               
    SAP-Release 700                                                                               
    Application server... "APP2"                                                                 
        Network address...... "132.147.166.13"                                                       
        Operating system..... "Windows NT"                                                           
        Release.............. "5.2"                                                                  
        Hardware type........ "2x IA64 Level 3"                                                      
        Character length.... 16 Bits                                                                 
        Pointer length....... 64 Bits                                                                
        Work process number.. 0                                                                      
        Shortdump setting.... "full"                                                                               
    Database server... "DB"                                                                      
        Database type..... "MSSQL"                                                                   
        Database name..... "ELP"                                                                     
        Database user ID.. "elp"                                                                               
    Char.set.... "C"                                                                               
    SAP kernel....... 700                                                                        
        created (date)... "Aug 23 2009 22:38:30"                                                     
        create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"                             
        Database version. "SQL_Server_8.00 "                                                                               
    Patch level. 221                                                                               
    Patch text.. " "                                                                               
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"                             
        SAP database version. 700                                                                    
        Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows               
         NT 6.0"                                                                               
    Memory consumption                                                                               
    Roll.... 16192                                                                               
    EM...... 29328880                                                                               
    Heap.... 0                                                                               
    Page.... 655360                                                                               
    MM Used. 3095760                                                                               
    MM Free. 1091456                                                                               
    User and Transaction                                                                               
    Client.............. 900                                                                     
        User................ "CPTN_SAPC5"                                                            
        Language key........ "E"                                                                     
        Transaction......... "CV03N "                                                                
        Transactions ID..... "C29156DF1F2DF180BE040017A4AB426D"                                                                               
    Program............. "SAPLCV120"                                                             
        Screen.............. "SAPLCV110 0101"                                                        
        Screen line......... 3  
    regards
    kunal

    Hi Kunal,
    you can display both type of document 2003 and 2007 also. You need to configure these applications in define workstation application by using t-code DC30.
    then you can display these files.
    Regards,
    Ravindra

  • R6025 run-time error in Visual C++

    Does anyone else get this error when exporting their dashboards from Xcelsius 2008 SP1?
    I have created several dashboards that I have inserted Web Intelligence content into via Live Office.  All data connections are set to 'Refresh on Load'.  We do have equations (INDEX, VLOOKUP, etc.) that are based on the Live Office content that we are importing.
    About 50% of the time I export the dashboard to a SWF file or to BOE, then I get the following Excel error:  R6025 run-time error in Visual C++
    runtime error R6025 - pure virtual function call
    http://support.microsoft.com/kb/125749
    Any ideas what could be causing this?  Other people have also tried exporting the file on their machines and they are getting the same error.
    Thanks.

    Hey Ulrich -
    I have 2 gb of RAM on this machine, but I have also tried it on a machine with 3 gb of RAM and I get the same error.
    If you notice, I am not getting the same runtime error that you were getting...  You were getting an error that was causing Xcelsius to crash altogether because it was running out of memory between the RAM and paging file.
    I'm getting a runtime error that is caused by Excel and is not caused by a memory issue.
    My runtime error is due to a Pure Virtual Function call - I only started getting this error when I imported the Live Office WEBI content into my Excel model - it must be caused due to this...
    By the way, I have also tried your other solution of setting a paging file size equal to 8 gb fixed size, but this did not work either.
    Any other ideas?

  • Smartform-Run time Error

    HI All,
    In my smartform I have 2 pages.
    There is one interface parameter 'COM' which is getting from the driver program.
    If COM = F, then I want to show 2 pages.
    If COM not equal to F, then I want to show only second page.
    For this I create a COMMAND , GO TO second page ( Based on this condition), in the first page.
    But now I a getting a Run time Error.
    How can I do this....
    Regards,
    Nikhil

    Hi,
    if you want them in the same spool:
    you have to set parameter SSFCOMPOP-TDNEWID.
    At the first print it is ON the next prints it is OFF.
    So you can in your printprogram decide if you print your fax version or your other version
    Thias will do i think.
    Gr., Frank

  • Getting run time error in organizer Photoshop Elements 5.0??

    How do I fix run time error for Adobe PhotoShop Elements
    5.0 when I pull up organizer?

    What operating system?

  • Run time error

    Dear All,
    During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
    This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
    Runtime Errors         ASSERTION_FAILED                                                            
    Date and Time          13.07.2007 10:13:37                                                         
    ShrtText                                                                               
    The ASSERT condition has been violated.                                                       
    What happened?                                                                               
    In the current application program, the system recognized a situation                         
        involving the ASSERT statement that should not occur. A runtime error                         
        occurred, either because there was no activation ID entered or because                        
        the ID of the activation mode used was set to "Cancel.                                        
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                      
        and make a note of the actions and input that caused the                                      
        error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                
        You can use transaction ST22 (ABAP Dump Analysis) to view and administer                      
         termination messages, especially those beyond their normal deletion                          
        date.                                                                               
    is especially useful if you want to keep a particular message.                                                                               
    Error analysis                                                                               
    The following activation ID was used: "No checkpoint group specified"                                                                               
    If the FIELDS addition was used with this ASSERT statement, the content                       
        of the first 8 fields is as follows:                                                          
        " (not used) "                                                                               
    " (not used) "                                                                               
    " (not used) "                                                                               
    " (not used) "                                                                               
    " (not used) "                                                                               
    " (not used) "                                                                               
    " (not used) "                                                                               
    " (not used) "                                                                               
    How to correct the error                                                                               
    Probably the only way to eliminate the error is to correct the program.                                                                               
    You may able to find an interim solution to the problem                                       
        in the SAP note system. If you have access to the note system yourself,                       
        use the following search criteria:                                                                               
    "ASSERTION_FAILED" C                                                                               
    "/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"                                            
        "/SAPAPO/TIMESTAMP_DIFFERENCE"                                                                
        If you cannot solve the problem yourself and you wish to send                                 
        an error message to SAP, include the following documents:                                                                               
    1. A printout of the problem description (short dump)                                         
           To obtain this, select in the current display "System->List->                              
           Save->Local File (unconverted)".                                                                               
    2. A suitable printout of the system log                                                      
           To obtain this, call the system log through transaction SM21.                              
           Limit the time interval to 10 minutes before and 5 minutes                                 
           after the short dump. In the display, then select the function                             
           "System->List->Save->Local File (unconverted)".                                                                               
    3. If the programs are your own programs or modified SAP programs,                            
           supply the source code.                                                                    
           To do this, select the Editor function "Further Utilities->                                
           Upload/Download->Download".                                                                               
    4. Details regarding the conditions under which the error occurred                            
           or which actions and input led to the error.                                               
    System environment                                                                               
    SAP Release.............. "640"                                                                               
    Application server....... "scmprd"                                                            
        Network address.......... "172.16.10.47"                                                      
        Operating system......... "AIX"                                                               
        Release.................. "5.3"                                                               
        Hardware type............ "0002BFAAD700"                                                      
        Character length......... 16 Bits                                                             
        Pointer length........... 64 Bits                                                             
        Work process number...... 0                                                                   
        Short dump setting....... "full"                                                                               
    Database server.......... "scmprd"                                                            
        Database type............ "ORACLE"                                                            
        Database name............ "SCP"                                                               
        Database owner........... "SAPSCP"                                                                               
    Character set............ "C"                                                                               
    SAP kernel............... "640"                                                               
        Created on............... "Jan 18 2006 20:47:39"                                              
        Created in............... "AIX 1 5 00538A4A4C00"                                              
        Database version......... "OCI_920 "                                                                               
    Patch level.............. "109"                                                               
        Patch text............... " "                                                                               
    Supported environment....                                                                     
        Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE                        
         10.2.0.."                                                                               
    SAP database version..... "640"                                                               
        Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"                                                                               
    Memory usage.............                                                                     
        Roll..................... 16192                                                               
        EM....................... 196923232                                                           
        Heap..................... 0                                                                   
        Page..................... 98304                                                               
        MM Used.................. 186636840                                                           
        MM Free.................. 1895288                                                             
        SAP Release.............. "640"                                                                               
    User and Transaction                                                                               
    Client.............. 950                                                                      
        User................ "SCMATP"                                                                 
        Language key........ "E"                                                                      
        Transaction......... "/SAPAPO/CCR "                                                           
        Program............. "/SAPAPO/SAPLTIMESTAMP"                                                  
        Screen.............. "SAPMSSY0 1000"                                                          
        Screen line......... 6                                                                        
    Information on where terminated                                                                   
        The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in                       
         "/SAPAPO/TIMESTAMP_DIFFERENCE".                                                              
        The main program was "/SAPAPO/CIF_DELTAREPORT3 ".                                                                               
    The termination occurred in line 61 of the source code of the (Include)                       
         program "/SAPAPO/LTIMESTAMPU08"                                                              
        of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor                
         610).                                                                               
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    31     lv_time_int_low      TYPE i,                                                            
       32     lv_timediff_int      TYPE i,                                                            
       33     lv_datediff_int      TYPE i,                                                            
       34     lv_time              TYPE t,                                                            
       35     ls_time              TYPE tstr_timestr.                                                 
       36                                                                               
    37 * check timestamp parameter                                                                 
       38 * ASSERT NOT iv_timestamp_high IS INITIAL.                                                  
       39 * ASSERT NOT iv_timestamp_low  IS INITIAL.                                                  
       40 * ASSERT iv_timestamp_low <= iv_timestamp_high.                                             
       41   IF iv_timestamp_high IS INITIAL                                                           
       42   OR iv_timestamp_low  IS INITIAL.                                                          
       43     RAISE invalid_parameter.                                                                
       44   ENDIF.                                                                               
    45   IF iv_timestamp_high < iv_timestamp_low.                                                  
       46     RAISE invalid_parameter.                                                                
       47   ENDIF.                                                                               
    48                                                                               
    49 * prepare timestamps                                                                        
       50 * .. split into date and time integers                                                      
       51   ls_timestamp_high = iv_timestamp_high.                                                    
       52   lv_date_int_high  = ls_timestamp_high-date.                                               
       53   lv_time_int_high  = ls_timestamp_high-time.                                               
       54   ls_timestamp_low  = iv_timestamp_low.                                                     
       55   lv_date_int_low   = ls_timestamp_low-date.                                                
       56   lv_time_int_low   = ls_timestamp_low-time.                                                
       57                                                                               
    58 * .. calc date diff                                                                         
       59 * .. check against max. allowed integer difference                                          
       60   lv_datediff_int = lv_date_int_high - lv_date_int_low.                                     
    >>>>>   ASSERT lv_datediff_int <= lc_datediff_intmax.                                             
       62                                                                               
    63 * calc time diff                                                                               
    64   lv_timediff_int = lv_time_int_high - lv_time_int_low.                                     
       65   IF lv_timediff_int < 0.                                                                   
       66     ADD 86400 TO lv_timediff_int.                                                           
       67     SUBTRACT 1 FROM lv_datediff_int.                                                        
       68   ENDIF.                                                                               
    69                                                                               
    70 * calc total duration                                                                       
       71   lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.                              
       72   lv_time = lv_timediff_int.                                                                
       73   ls_time = lv_time.                                                                        
       74   ls_duration-hours   = lv_duration_int DIV 3600.                                           
       75   ls_duration-minutes = ls_time-minute.                                                     
       76   ls_duration-seconds = ls_time-second.                                                     
       77                                                                               
    78   ev_duration_packed  = ls_duration.                                                        
       79   ev_duration_integer = lv_duration_int.                                                    
       80 ENDFUNCTION.                                                                               
    Contents of system fields                                                                         
    Name     Val.                                                                               
    SY-SUBRC 0                                                                               
    SY-INDEX 0                                                                               
    SY-TABIX 1                                                                               
    SY-DBCNT 1                                                                               
    SY-FDPOS 6                                                                               
    SY-LSIND 0                                                                               
    SY-PAGNO 0                                                                               
    SY-LINNO 1                                                                               
    SY-COLNO 1                                                                               
    SY-PFKEY                                                                               
    SY-UCOMM                                                                               
    SY-TITLE CIF - Comparison/Reconciliation of Transaction Data                                      
    SY-MSGTY                                                                               
    SY-MSGID                                                                               
    SY-MSGNO 000                                                                               
    SY-MSGV1                                                                               
    SY-MSGV2                                                                               
    SY-MSGV3                                                                               
    SY-MSGV4                                                                               
    Active Calls/Events                                                                               
    No.   Ty.          Program                             Include                             Line   
          Name                                                                               
    5 FUNCTION     /SAPAPO/SAPLTIMESTAMP               /SAPAPO/LTIMESTAMPU08                  61  
          /SAPAPO/TIMESTAMP_DIFFERENCE                                                                
        4 FORM         /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3F17                349  
          COMPARE_ORDER_HEADER                                                                        
        3 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U03                125  
          /SAPAPO/CIF_DELTA3_COMP_ORDER                                                               
        2 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U01                871  
          /SAPAPO/CIF_DELTA3_COMP                                                                     
        1 EVENT        /SAPAPO/CIF_DELTAREPORT3            /SAPAPO/CIF_DELTAREPORT3              189  
          START-OF-SELECTION                                                                          
    Chosen variables                                                                               
    Name                                                                               
    Val.                                                                               
    No.       5 Ty.          FUNCTION                                                                 
    Name  /SAPAPO/TIMESTAMP_DIFFERENCE                                                                
    IV_TIMESTAMP_HIGH                                                                               
    #q1###                                                                               
    02073899                                                                               
    2001125C                                                                               
    IV_TIMESTAMP_LOW                                                                               
    ##q!####                                                                               
    00720899                                                                               
    2011125C                                                                               
    EV_DURATION_INTEGER                                                                               
    0                                                                               
    0000                                                                               
    0000                                                                               
    EV_DURATION_PACKED                                                                               
    000000                                                                               
    00000C                                                                               
    SYST-REPID                                                                               
    /SAPAPO/SAPLTIMESTAMP                                                                         
        0000000000000000000000000000000000000000                                                      
        0000000000000000000000000000000000000000                                                      
        2545454254545444554452222222222222222222                                                      
        F31010FF310C49D5341D00000000000000000000                                                      
    %_SPACE                                                                               
    0                                                                               
    0                                                                               
    2                                                                               
    0                                                                               
    LS_TIMESTAMP_HIGH                                                                               
    22000713182959                                                                               
    00000000000000                                                                               
    00000000000000                                                                               
    33333333333333                                                                               
    22000713182959                                                                               
    LV_DATE_INT_HIGH                                                                               
    803363                                                                               
    0042                                                                               
    0C23                                                                               
    LS_TIMESTAMP_HIGH-DATE                                                                               
    22000713                                                                               
    00000000                                                                               
    00000000                                                                               
    33333333                                                                               
    22000713                                                                               
    LV_TIME_INT_HIGH                                                                               
    66599                                                                               
    0002                                                                               
    0147                                                                               
    LS_TIMESTAMP_HIGH-TIME                                                                               
    182959                                                                               
    000000                                                                               
    000000                                                                               
    333333                                                                               
    182959                                                                               
    LS_TIMESTAMP_LOW                                                                               
    20071210182959                                                                               
    00000000000000                                                                               
    00000000000000                                                                               
    33333333333333                                                                               
    20071210182959                                                                               
    LV_DATE_INT_LOW                                                                               
    733021                                                                               
    0025                                                                               
    0BFD                                                                               
    LS_TIMESTAMP_LOW-DATE                                                                               
    20071210                                                                               
    00000000                                                                               
    00000000                                                                               
    33333333                                                                               
    20071210                                                                               
    LV_TIME_INT_LOW                                                                               
    66599                                                                               
    0002                                                                               
    0147                                                                               
    LS_TIMESTAMP_LOW-TIME                                                                               
    182959                                                                               
    000000                                                                               
    000000                                                                               
    333333                                                                               
    182959                                                                               
    SY-UNAME                                                                               
    SCMATP                                                                               
    000000000000                                                                               
    000000000000                                                                               
    544455222222                                                                               
    33D140000000                                                                               
    SCREEN-INPUT                                                                               
    1                                                                               
    0                                                                               
    0                                                                               
    3                                                                               
    1                                                                               
    LV_DATEDIFF_INT                                                                               
    70342                                                                               
    001C                                                                               
    0126                                                                               
    LV_TIMEDIFF_INT                                                                               
    0                                                                               
    0000                                                                               
    0000                                                                               
    SYST                                                                               
    #######################################&#332;###############################################&#19800; C#&#1280;##
        0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
        000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
        0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
        0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
    SY-REPID                                                                               
    /SAPAPO/SAPLTIMESTAMP                                                                         
        0000000000000000000000000000000000000000                                                      
        0000000000000000000000000000000000000000                                                      
        2545454254545444554452222222222222222222                                                      
        F31010FF310C49D5341D00000000000000000000                                                      
    %_DUMMY$$                                                                               
    0000                                                                               
    0000                                                                               
    2222                                                                               
    0000                                                                               
    No.       4 Ty.          FORM                                                                     
    Name  COMPARE_ORDER_HEADER                                                                        
    SYST-REPID                                                                               
    /SAPAPO/SAPLCIF_DELTA3                                                                        
        0000000000000000000000000000000000000000                                                      
        0000000000000000000000000000000000000000                                                      
        2545454254544445444543222222222222222222                                                      
        F31010FF310C396F45C413000000000000000000                                                      
    GC_APPEND_MODE                                                                               
    3                                                                               
    0                                                                               
    0                                                                               
    3                                                                               
    3                                                                               
    LS_FIELDS_TO_COMPARE-DUEDATE                                                                      
        X                                                                               
    0                                                                               
    0                                                                               
    5                                                                               
    8                                                                               
    SYST                                                                               
    #######################################&#332;###############################################&#19800; C#&#1280;##
        0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
        000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
        0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
        0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
    LS_APO_ORDER-ORDTYPE                                                                               
    5                                                                               
    0                                                                               
    0                                                                               
    3                                                                               
    5                                                                               
    GC_PLANNED_ORDER                                                                               
    5                                                                               
    0                                                                               
    0                                                                               
    3                                                                               
    5                                                                               
    LS_R3_ORDER-STATUSCNF                                                                               
    0                                                                               
    0                                                                               
    2                                                                               
    0                                                                               
    GC_ORDER_STATUS_NO_CONF                                                                               
    1                                                                               
    0                                                                               
    0                                                                               
    3                                                                               
    1                                                                               
    LS_APO_ORDER-STATUSCNF                                                                               
    0                                                                               
    0                                                                               
    2                                                                               
    0                                                                               
    GC_PRED_OUT_DEL                                                                               
    A                                                                               
    0                                                                               
    0                                                                               
    4                                                                               
    1                                                                               
    GC_TND_DELETE                                                                               
    CN                                                                               
    00                                                                               
    00                                                                               
    44                                                                               
    3E                                                

    Dear Sajit,
    Go through the following OSS Notes:
    <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
    Regards,
    Naveen.

  • Interface Mapping run time error...java.lang.nullpointerException  thrown

    Hi,
    I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
    Interface Mapping run time error...java.lang.nullpointerException  thrown during application mapping.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
      <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Service>CAMEL_BS_01</SAP:Service>
      <SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>Camel_BService_01</SAP:Service>
      <SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
    - <SAP:Mapping notRequired="M">
      <SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
      <SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
      <SAP:SP>-1</SAP:SP>
      </SAP:Mapping>
      </SAP:Receiver>
      <SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
      <SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
      <SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20070108</SAP:Date>
      <SAP:Time>224350</SAP:Time>
      <SAP:Host>gbdci550</SAP:Host>
      <SAP:SystemId>PI7</SAP:SystemId>
      <SAP:SystemNr>03</SAP:SystemNr>
      <SAP:OS>AIX</SAP:OS>
      <SAP:DB>DB6</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>014</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PIAFUSER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>002</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
      <SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
      <SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>168</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
      <SAP:InterfaceAction>DEL</SAP:InterfaceAction>
      <SAP:RandomNumber>67</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
      <SAP:Serialize_Children>X</SAP:Serialize_Children>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
      <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="T">Party normalization: receiver</Trace>
      <Trace level="1" type="T">Receiver scheme external =</Trace>
      <Trace level="1" type="T">Receiver agency external =</Trace>
      <Trace level="1" type="T">Receiver party external =</Trace>
      <Trace level="1" type="T">Receiver party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0008</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
      <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
      <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
      <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
      <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
    - <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MainDocument</SAP:Name>
      <SAP:Description />
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>
    Please I request to give me some hint how to troubleshoot this issue.
    Thanks a lot,
    Srujan

    Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
    i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
    Here is the Java exception
    Mappage d'interface
    Can someone be helpful for that ?
    Regards
    Laurent
    Message was edited by:
            Laurent Gitton

  • Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

    I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
    Run-Time error '-2147417848 (80010108)
    Automation error
    The object invoked has disconnected from its clients.
    CR exits after this error message.
    I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
    Anyone ever had this?
    Thank you,
    R.

    Is this still an issue?

  • Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi,
    Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi Shilpa ,
    Please refer to the following link and see if that helps you out.
    https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
    Are you trying to access the PDF with Acrobat or Adobe Reader?
    Regards
    Sukrit Dhingra

  • Xml Publisher  run time error '5148'

    Dear
    I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
    run time error '5148'
    The number must be between 1 to 63
    I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
    Please help on this regard. thanks in advance.

    Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
    Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
    If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
    So - Import them, a few at a time. Then move them all into one group and you're good to go.

Maybe you are looking for