Run time error for program /MRSS/SAPLRSG_PM_ORDER
Hi All,
When I am confirming the service order through transaction code IW41, I am getting a run time error which says " Error in Program /MRSS/SAPLRSG_PM_ORDER". In this client MRS is active.
Some details of Runtime error is as follows.
Trigger Location of Runtime Error
Program /MRSS/SAPLRSG_PM_ORDER
Include /MRSS/LRSG_PM_ORDERU03
Row 1.224
Module type (FUNCTION)
Module Name /MRSS/RSG_PM_ORDER_PUSH_TO_MRS
Source Code Extract
Line SourceCde
1194
1195 CLEAR: lv_failed, lt_messages.
1196
1197 lt_assignment_rfc[] = lt_assignment[].
1198 CALL FUNCTION '/MRSS/RSG_MAINTAIN_MRS'
1199 EXPORTING
1200 it_dem_h = lt_dem_h
1201 it_adm = lt_adm
1202 it_plr = lt_plr
1203 it_plrs = lt_plrs
1204 it_info = lt_info
1205 it_tool = lt_tool
1206 it_relat = lt_rel_dem
1207 it_qualif = lt_qualif_dem
1208 it_assignment = lt_assignment_rfc
1209 * iv_no_save = no_save
1210 iv_no_save = true
1211 iv_no_commit = no_commit
1212 it_status = lt_status_abst
1213 it_partner = lt_partner_ext
1214 it_address = lt_address
1215 it_operations = lt_opera_activity
1216 iv_no_authority_check = lv_no_authority_check
1217 it_split_upd_number = lt_split_upd_number
1218 IMPORTING
1219 et_demands = lt_demand_mrs
1220 ev_failed = lv_failed
1221 et_messages = lt_messages.
1222
1223 IF lv_failed = true.
>>>>> MESSAGE x000(/mrss/sge).
1225 ENDIF.
1226
Hi,
Can you try with T-code /n/MRSS/WFM_HR.
Make sure to open only one SAP session to run this.
Ask yor basis admin to look in to error details ,related SM21 logs,cancel jobs, Job logs and report analysis.
Regards
Nagaraju
Similar Messages
-
Run time error for program: RPCALCU0_CE
Hi Abapers,
When we execute the standard program: RPCALCU0_CE from SE38. Below run time error is getting trigerred before selection screen is displayed. Below are the run time error details -
Runtime Error UNCAUGHT_EXCEPTION
Exception CX_HRPA_INVALID_PARAMETER
Occurred on 08/04/2010 at 01:22:17
What happened?
The exception 'CX_HRPA_INVALID_PARAMETER' was raised but was not caught at any
stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_HRPA_RESOLVE_EXCEPTION=====CP', had to
be terminated.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_HRPA_INVALID_PARAMETER',
was neither
caught nor passed along using a RAISING clause, in the procedure
"RESOLVE_EXCEPTION" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Invalid parameter EXCEPTION, value
The occurrence of the exception is closely linked to the occurrence of a
previous exception, "CX_HRPA_VIOLATED_PRECONDITION", which occurred in the
program "CL_HRPA_MASTERDATA_FACTORY====CP" -
specifically in line 6 of the (Include) program
"CL_HRPA_MASTERDATA_FACTORY====CM004".
The reason for the exception was:
Precondition violated
Please suggest the solution to overcome this.Hey,
I could not figure your exact problem. But you can go to the transaction ST22 to take a better look at the error that you got. This gives a detailed explanation of the exact error that you are getting. The moment you enter this transaction, you will see the number of runtime errors you got today. Just click on 'Today'. This will give you the list of runtime errors. Click on the relevent error and you can get a much more detailed explanation of the same.
Hope this helps. -
Getting run time error for multiple counter plan
Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
SrinikaHi,
Please check reason for update termination in Transaction code SM13. -
Kp26 getting run time error in program "COCC2009 "
Dear all
Im getting run time error massage once the KP26 running . "The data object "ITDAT1" has no component called "TXTUPL", but there is a component called "TXTUP".
The following syntax error occurred in program "COCC2009 " in include "RKCCAI02
We are working on upgraded system. please hep me to solve this issue.
Regard,
nawaHi
I am using ECC 6.0 and when I checked the field mentioned TXTUPL, it is available there.
Can you check the COCC2009 program whether the field is there or not.
Shiva -
Run-time error for the chart - TBUtilities
Hello,
I'm trying to create a report template with the BI Publisher desktop plugin. The load of the xml file, the Table creation and PDF export work fine. When I want to add a chart to the template (Insert -> Chart...), I have a Microsoft Visual Basic Error:
Run-Time error '-2147024894(80070002)':
File or assembly name TBUtilities, or one of its dependencies, was not found.
I use Word 2000 (9.0.8950 - SP3), .Net framework 2.0 and Java JRE 1.5.0_05.
I checked the other topic about this type of error but I didn't find any solutions...
Is there a patch to fix this error ???
ThanksHas anybody got an answer for this one, as it has just happened to me
Gus -
ORA-01002 run-time error for help
Hi, All:
I modified little in Sample10.pc of PRO*C sample code to fit both NT and
Linux using 8i version precompiler, with VC++ and GCC Compiler respectively.
All process were fine when they connected to a DB Server(8i version), but
when they connected to the other Server(8 version), the error : ORA-01002
(Fetch out of sequence) was always issued at run-time. I checked the error
message and found that the program was stuck on the "PREPARE" description. I
have spent much more time debugging, but it still didn't work. Could you
help me? I'm so preciated.
Best regards,
Yen-Gou Pan
nullHello,
This error comes when there is an OpenSQL statement that tries to insert a record into a database table that is already existing.
You need to implement SAP Note 196113 and 1041894 along with technical consultant to help and overcome the issue.
Br,
Tushar -
Dear all,
I have some troubles with LabWindows CVI. Sometimes (maybe 2 or 3 times by week) my application crash with General protection error in cvirte adress. This crash never happens in the same part of the code is always happens in random way. The problem is that in debug mode we don't have any information about where the problem occurs in cvirte. This bugs can happens with differents application from very simple application to very complex applications.
Do you have some ideas that how can I solve these problems?
ThanksHello J. Romero!
Thank you for the crash information you provided!
Hover you managed to collaborate with NI France more in order to determine the cause of this crash?
Unfortunately, the information you provided is still not sufficient for us to determine the exact cause and circumstance of this crash:
The provided event logs only contain relative addresses of the locations. An absolute crash address can better suggest the exact location. Please provide a screenshot of the crash window dialog, which contains the exact absolute address of this crash.
In your original post, you mentioned that you can reproduce the crash with a "very simple application". Is it possible for you to send us the application on our incoming FTP server, so that we can build and run the program on our side?
Do you have a suspicion for any particular libraries, components or UI controls that you are using, which reproduce the crash. E.g. "whenever I perform this action in a Numeric Control, the crash occurs...". This will further help us to narrow down on the problem!
If #2 is not possible, one other solution would be to send us a crash dump of the application. Please follow the steps in this Developer Community post, in order to generate and send us a crash dump: https://decibel.ni.com/content/docs/DOC-1496
Best regards!
- Johannes -
In loading Itunes down on my PC using Vitsa I keep geeting an error message saying that a program is trying to load: Microsoft Visual C++ Runtime Library and ITunes will not complete the down load. Any Suggestions
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Run time Error while Creating Expense request
Dear Friends ,
In E-Payment ( Expense Claim ) creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LR_CONTEXT_ELEMENT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
"CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
"PRESET"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
in "PRESET".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 60
of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
in the RAISING clause of its signature.
The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
code begins in line
1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath -
Run time error while closing the CRM Order using BAPI
Hi Experts,
Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
For the custom program we will give input as the order number and execute it, this will close the order.
Here close the order means assigning it to Close status as well assign the reason code.
We have created some reason codes for closed status.
So when the program is run the Order moves from resolved status to closed status along with reason code.
But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
Please find my code which have used in the custom program
Closing the resolved SOs in the system
CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
EXPORTING
objnr = iv_guid
user_status = lc_status_closed
EXCEPTIONS
object_not_found = 1
status_inconsistent = 2
status_not_allowed = 3
OTHERS = 4.
IF sy-subrc <> 0.
WRITE : 'Error at maintaining status'.
ENDIF.
Set reason code
build lt_subject
ls_subject-ref_guid = iv_guid.
ls_subject-katalogart = 'A2'.
ls_subject-codegruppe = 'ZR000003'.
ls_subject-code = 'ZR33'. " Reason code
ls_subject-mode = 'A'.
APPEND ls_subject TO lt_subject.
build lt_ossset
ls_osset-ref_guid = iv_guid.
ls_osset-subject_profile = 'ZREASON03'.
ls_osset-profile_type = 'G'.
ls_osset-subject = lt_subject.
APPEND ls_osset TO lt_osset.
build lt_service_os
ls_service_os-ref_guid = iv_guid.
ls_service_os-ref_kind = 'A'.
ls_service_os-osset = lt_osset.
APPEND ls_service_os TO lt_service_os.
build lt_input_fields
REFRESH: lt_input_fields, lt_field_names.
CLEAR : ls_input_fields, ls_field_names.
ls_field_names-fieldname = 'CODE'.
APPEND ls_field_names TO lt_field_names.
ls_field_names-fieldname = 'CODEGRUPPE'.
APPEND ls_field_names TO lt_field_names.
ls_field_names-fieldname = 'KATALOGART'.
APPEND ls_field_names TO lt_field_names.
ls_field_names-fieldname = 'SERVICE_PROFILE'.
APPEND ls_field_names TO lt_field_names.
ls_input_fields-ref_guid = iv_guid.
ls_input_fields-ref_kind = 'A'.
ls_input_fields-objectname = 'SERVICE_OS'.
ls_input_fields-field_names = lt_field_names.
APPEND ls_input_fields TO lt_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_service_os = lt_service_os
CHANGING
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
IF sy-subrc <> 0.
WRITE : 'Error at maintaining reason'.
ENDIF.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
it_objects_to_save = lt_header_guid
iv_update_task_local = lv_update_task_local
IMPORTING
et_saved_objects = lt_saved_objects
EXCEPTIONS
document_not_saved = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE : 'Error at saving'.
ELSE.
WRITE : 'Successfully Closed'.
COMMIT WORK AND WAIT.
ENDIF.
Run time error is coming at COMMIT WORK AND WAIT statement.
Please let me know any corrections are required in the above program.
When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
Kindly provide your feedback.Hi Dinakar,
You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
Regards - Pawan -
I am getting below run time error while program executing ( program execution time one hour ) .
" No more storage space available for extending an internal table."
suspecting below code causing issue:
LOOP AT IT_ITEMS INTO WA_ITEMS.
CALL FUNCTION 'UDM_DC_NOTES_GET'
EXPORTING
im_guid = WA_ITEMS-case_guid
IMPORTING
es_return = ls_return
et_notes = lt_notes.
LOOP AT lt_notes INTO ls_notes TO 2.
CONCATENATE p_p_wa_output_notes ls_notes-tdline INTO p_p_wa_output_notes.
ENDLOOP.
ENDLOOP.
More ST22 Details::__
5052 PAR2 00 0000 0001 0000 CL_SCMG_CASE_API==============CM01O 78
5054 ABOO 03 0000 C007 0000 CL_SCMG_CASE_API==============CM01O 78
5056 mvqk 40 8081 0058 0000 CL_SCMG_CASE_API==============CM01O 86
5058 MOVE FF 024B C01C C007 CL_SCMG_CASE_API==============CM01O 87
5060 mvqs 04 8000 00A0 0001 CL_SCMG_CASE_API==============CM01O 88
>>>>> TAPP 00 0248 C011 C012 CL_SCMG_CASE_API==============CM01O 89
5064 MOVE FF 0244 0062 C011 CL_SCMG_CASE_API==============CM01O 90
5066 METH 13 0001 006A 8011 0000 0000 0000 0000 CL_SCMG_CASE_API==============CM01O 92
5070 PAR1 C5 C016 CL_SCMG_CASE_API==============CM01O 92
5071 PAR2 00 0000 0001 0000 CL_SCMG_CASE_API==============CM01O 92
5073 METH 13 0005 006B 8012 0000 0000 0000 0000 CL_SCMG_CASE_API==============CM01O 93
5077 PAR1 01 C007 CL_SCMG_CASE_API==============CM01O 93
Active Calls/Events
Chosen variables
No. 7 Ty. METHOD
Name CL_SCMG_CASE_API=>IF_SCMG_CASE_API~OPEN_CASE
IM_CASE_GUID
IT_DISPUTE_CASES
Table IT_5934[30017x344]
\PROGRAM=ZFR_185334_COLL_MGMT_EXTRACT\DATA=IT_DISPUT
Table reference: 61
TABH+ 0(20) = 000000011372F8B0000000000000000000000
TABH+ 20(20) = 0000003D0000172E0000754100000158FFFFF
TABH+ 40(16) = 040000000000158000102C9401800000
store = 0x000000011372F8B0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 61 (0x0000003D)
label = 5934 (0x0000172E)
fill = 30017 (0x00007541)
leng = 344 (0x00000158)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000100
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
ABAP Control Blocks (CONT)
No. Ty. Program Include Line
Name
7 METHOD CL_SCMG_CASE_API==============CP CL_SCMG_CASE_API==============CM01O 89
CL_SCMG_CASE_API=>IF_SCMG_CASE_API~OPEN_CASE
6 METHOD CL_SCMG_CASE_API==============CP CL_SCMG_CASE_API==============CM001 6
CL_SCMG_CASE_API=>IF_SCMG_CASE_API~GET_CASE
5 FUNCTION SAPLUDM_DC_INTERFACES LUDM_DC_INTERFACESU09 38
UDM_DC_NOTES_GET
4 FORM ZFR_185334_COLL_MGMT_EXTRACT ZFR_185334_COLL_MGMT_EXT_FORM 666
F_GET_NOTES
3 FORM ZFR_185334_COLL_MGMT_EXTRACT ZFR_185334_COLL_MGMT_EXT_FORM 619
F_GET_CASE_ATTR
2 FORM ZFR_185334_COLL_MGMT_EXTRACT ZFR_185334_COLL_MGMT_EXT_FORM 104
F_PROCESS_DATA
1 EVENT ZFR_185334_COLL_MGMT_EXTRACT ZFR_185334_COLL_MGMT_EXTRACT 93
START-OF-SELECTION
Please help how to fix this and let me know if you few more details..
or let me know if there any alternative for getting note..
Thanks
SireeshaHi sireesha,
Check SAP OSS NOTe : [1470549 |https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134373035343926]
Resolution
Split the selection criteria and therefore the memory consumption of the report : Look at the definition of the reports causing the short dump and the number of drill down characteristics selected. If all or most of the characteristics are selected, then this will lead to many records in internal tables that contain the aggregated data.
Enlarge the user quote for Heap (abap/heap_area_dia) and re-start the R/3 instance (note 103747)
Change the memory parameters dynamically with report RSMEMORY - You can refer to the Online Documentation for the detail: [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b52963524c307be10000000a42189b/frameset.htm |http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b52963524c307be10000000a42189b/frameset.htm ]
Regards,
koolspy. -
Run Time error in MIGO Posting
Dear Friends,
While Posting MIGO against a import PO system throws run time error for a particular plant. I have created 2 plants for the same company code. But first plant does not have any problem. Pl help me and let me know what may be the cause and its solution. No conditions maintained for the Vendor. After PO directly user creating MIGO.
Regards,
AshokPl find the Run Time error of Exception while posting. Before posting Document was OK while checking.
Runtime Errors MESSAGE_TYPE_X
Date and Time 11.01.2011 10:34:16
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Operation QM14 not available for this lot
Long text of error message:
Diagnosis
The desired operation does not fit the inspection lot (object
type).
System Response
The operation is not permitted and can therefore not be carried
out.
Procedure
Technical information about the message:
Message class....... "QV"
Number.............. 224
Variable 1.......... "QM14"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLMBWL
Include LMBWLU21
Row 62
Module type (FUNCTION)
Module Name MB_POST_GOODS_MOVEMENT
Source Code Extract
Line SourceCde
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ELSE. "1245374
43 l_mem_id = 'MKPF-XBLNR'. "1245374
44 FREE MEMORY ID l_mem_id. "1245374
45 ENDIF.
46 IF xmkpf-xabln IS INITIAL. "note 434093
47 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
48 ENDIF. "note 434093
49
50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
EXCEPTIONS
error_message = 4.
As soon as we have started to put things into UPDATE TASK, w
ensure that errors definitely terminate the transaction.
MESSAGE A is not sufficient because it can be catched from
external callers which COMMIT WORK afterwards, resulting in
incomplete updates. Read note 385830 for the full story.
IF NOT sy-subrc IS INITIAL.
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MESSAGE A263.
ENDIF.
Optische Archivierung
Spaete Erfassung mit Barcode
Redesign of barcode handling -> note 780365
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
xmkpf-mjahr
barcode.
MOVE-CORRESPONDING xmkpf TO emkpf.
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
EXCEPTIONS
error_message = 4.
MOVE-CORRESPONDING xmkpf TO emkpf.
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
EXCEPTIONS
error_message = 4.
IF NOT sy-subrc IS INITIAL.
Regards,
Ashok -
Run-time ERROR! Help Please...
Hello everyone,
I got a run time error for my very short program please anyone help me!!!
My source code is
//LKOracleDB.java
public class LKOracleDB
public static void main()
I set path to jdk14b2\bin ,
and I set classpath to jdk14b2\lib
I compiled it with no error by using
=>javac LKOracleDB.java
then when I tried to run it with
=>java LKOracleDB
It show this error
=>Exception in thread "main" java.lang.NoClassDefFoundError: LKOracleDB
.... What could be the problem? Please help..
Thanks in advance,
lenk....Is your source file in a package?No, my source file is not in any package what u see is all code in my .java file. Do I need to put it in package? If so please tell me a little bit more.
Are you running the java command from the same >directory that you compiled the code from?Yes, I recheck it.
Your main() should be (String[] args) or else it is not >considered a valid main for the JVM to start. I change it but It still not work...?
Thanks for your opinion
lenk -
Urgent help on this run time error LOAD_TYPEPOOL_VERSION_MISMATCH
hi i got this run time error for a stamdard transaction..can anyboby throw some light?
LOAD_TYPEPOOL_VERSION_MISMATCH
02.08.2007 21:23:11
ShrtText
Type group was changed at runtime.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLCOBADI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
The system attempted to correct the error
automatically, so you should try to restart
the program.
The type group "COBAI" was changed while the program was running, so that an
inconsistence occurred at runtime.
The type group "COBAI" has the version 20070627153024.
The program "%_CCOBAI" uses the version 20070802190113.
The internal session was started at 20070802212309.Dear Ramachandran Rakhunathan ,
this special error happens, when you change a table, e.g. table AUFM. Please do not change central data structures when the system is running. Please take a look at SAP Note <a href="https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=162991">162991</a> for further information.
Thanks,
Hannes Kuehnemund
SAP LinuxLab -
Getting run time error in organizer Photoshop Elements 5.0??
How do I fix run time error for Adobe PhotoShop Elements
5.0 when I pull up organizer?What operating system?
Maybe you are looking for
-
HT2534 how to get facetime on iphone 4 UAE model
how i get the app of FaceTime on my iphone 4 my iphone model is MC605AE could i anyone help me to get facetime app ??
-
Recovery without screen - G72-261US
I have recently aquired a G72-261US from a friend. The screen is completely busted. It works fine using my tv as a monitor via HDMI after windows as booted however I wanted to perform a recovery from the partition to start fresh. When I've restart
-
How many videos can Keynote handle?
I want to do a presentation using a lot of video clips -- MOVs at 1280 x 720. The idea is to have one clip per slide... perhaps about 12-15. We want to do a presentation where we have control over clicking forward to the next video clip, with possibl
-
when connecting my iTouch in iTunes, this message appears: "The iPod is synced with another iTunes library. Do you want to erase this iPod and sync with this library?" I did that, but it displays it every time I reconnect. I have only ever connected
-
Read/set HTML checkbox in JSP
Hello, I need to directly read and set the state of an HTML checkbox from a JSP page that contains it. It is not sufficient to submit the form and then get the value from the next page; I need to be able to set the value when the page loads, and then