Run time error in smart forms
For Printing out the Delivery chellan we are using the report to get prin out in PDF and Smartform print...we are fetching the values from the table(RG23D register for the depot) for one particular material document,it is giving the error tax procedure is invalid....if i try to debug it is going very interiorly,i cant set the break point manuallly in the code since it is in quality and not self devloped...! i found out the window where the error is coming i want to debug the particular window..............Pls suggest me on this
Dinesh Kumar
Hi,
What you can do is,
It seems that you are debugging a smartform which is not developed by you !! It is not at all difficult to find the source of error. The runtime error should clearly tell you the line number from where the error is occuring. Copy that part of code from where system is throwing a runtime error.
Goto SE37 and enter the function module corresponding to your smartform and display. Click on Find. Paste that line code and select In Main Program and the search.
Go to the inline documentation of the subroutine from where this code is written. You should see the following.
NODE -- Gives you the node name of Program Lines.
Regards,
Danish.
Similar Messages
-
ORACLE Forms Run Time error FRM -92050 failed to connect to server
server name:
osfsun.oklaXXX:9000
Details:
Java Exception
Java.netNoRouteToHostException: operation timed out
at java.net.plainsocketImpl.doConnect(Compiled Code)
at java.net.plainsocketImpl.connectToAddress(plainsocketImpl:124)
There is more....
I have opened the port 9000 in my LAN firewall, I have checked Jinitiator control panel, I'm able to resolve web address but receive this web run time error,.anyhelp would be appreaciated.
thanksI resolved this issue. It was related to the firewall using port 9000/ The issue was not related to Oracle.
-
hi
i am getting run time error while running DRIVER PROGRAM of smartform.
both driver program and smartform running successfully without any error while executing saprately.
while calling Smart Form by driver prg. it is giving error as :-
<u> <b> Events are already defined</b>.</u>
Description :- <b>You tried to define events for a section, but a section with
events is already active. You are not allowed to nest events.</b>
plz guide meHi,
Go to smartforms and check whether you had selected the events in the data tab of complex section or table which you had created which is under the short creteria
or.
check whter you had selected any events in the conditions tab of any of the node whether it maight be text element,table,section,window..etc.
Thanks,
Nethaji. -
Getting run time error while calling smartform
hi,
i am getting run time error of "maintain output device in your master data" while calling smart form.
p_output_options-xsfcmode = 'X' .
p_output_options-xsf = space .
p_output_options-xdfcmode = 'X' .
p_output_options-xdf = space .
p_output_options-tddest = 'LP01'.
p_output_options-tdnewid = 'X'.
p_output_options-tddelete = SPACE.
p_control_parameters-no_dialog = 'X' .
p_control_parameters-getotf = 'X' .
p_control_parameters-DEVICE = 'PRINTER'.Hi Neha
Your program looks out for the default printer configured against your user (Check SU01 : Constant tab ). You dont seem to have maintained it properly as a result of which you get this message. You will have to configure your printer device to overcome this error.
Choose menu: System -> User Profile -> Own data.
On the Defaults tab, give LOCL code for the output device.
You can also check the output device setting in transaction SPAD.
Regards,
Uday -
Hi Experts !
I have transported a request to prd. server . while executing the t.c error is comming " object hrpyoo11 of class RE and language EN dosent exist " but its not so in dev. server . also , when i am executing it by variant its showing run time error { message type " " is unknown} .plz help me in removing these error .
thanks .
ranjanahi,
what ur program has
for ex: if it is a smart form then while executing u get a name for a smartform [Function module name] and u use it in program in development server. when same program transported to production server there u might not be having the FM which leads to a error there so. in such situations if it is smart forms
then create a variable which holds the name of smartform and pass that variable. in production the smart form when executed creates a FM which is in the variable created by you.'
if it is in bdc then transport the flat file to production system --- it might be one cause......
if helpful reward some points.
with regards,
Suresh Aluri. -
Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors ASSERTION_FAILED
Date and Time 13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
involving the ASSERT statement that should not occur. A runtime error
occurred, either because there was no activation ID entered or because
the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
of the first 8 fields is as follows:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
"/SAPAPO/TIMESTAMP_DIFFERENCE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
Network address.......... "172.16.10.47"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "0002BFAAD700"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "scmprd"
Database type............ "ORACLE"
Database name............ "SCP"
Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Jan 18 2006 20:47:39"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 196923232
Heap..................... 0
Page..................... 98304
MM Used.................. 186636840
MM Free.................. 1895288
SAP Release.............. "640"
User and Transaction
Client.............. 950
User................ "SCMATP"
Language key........ "E"
Transaction......... "/SAPAPO/CCR "
Program............. "/SAPAPO/SAPLTIMESTAMP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
"/SAPAPO/TIMESTAMP_DIFFERENCE".
The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
program "/SAPAPO/LTIMESTAMPU08"
of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
610).
Source Code Extract
Line SourceCde
31 lv_time_int_low TYPE i,
32 lv_timediff_int TYPE i,
33 lv_datediff_int TYPE i,
34 lv_time TYPE t,
35 ls_time TYPE tstr_timestr.
36
37 * check timestamp parameter
38 * ASSERT NOT iv_timestamp_high IS INITIAL.
39 * ASSERT NOT iv_timestamp_low IS INITIAL.
40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
41 IF iv_timestamp_high IS INITIAL
42 OR iv_timestamp_low IS INITIAL.
43 RAISE invalid_parameter.
44 ENDIF.
45 IF iv_timestamp_high < iv_timestamp_low.
46 RAISE invalid_parameter.
47 ENDIF.
48
49 * prepare timestamps
50 * .. split into date and time integers
51 ls_timestamp_high = iv_timestamp_high.
52 lv_date_int_high = ls_timestamp_high-date.
53 lv_time_int_high = ls_timestamp_high-time.
54 ls_timestamp_low = iv_timestamp_low.
55 lv_date_int_low = ls_timestamp_low-date.
56 lv_time_int_low = ls_timestamp_low-time.
57
58 * .. calc date diff
59 * .. check against max. allowed integer difference
60 lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>> ASSERT lv_datediff_int <= lc_datediff_intmax.
62
63 * calc time diff
64 lv_timediff_int = lv_time_int_high - lv_time_int_low.
65 IF lv_timediff_int < 0.
66 ADD 86400 TO lv_timediff_int.
67 SUBTRACT 1 FROM lv_datediff_int.
68 ENDIF.
69
70 * calc total duration
71 lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
72 lv_time = lv_timediff_int.
73 ls_time = lv_time.
74 ls_duration-hours = lv_duration_int DIV 3600.
75 ls_duration-minutes = ls_time-minute.
76 ls_duration-seconds = ls_time-second.
77
78 ev_duration_packed = ls_duration.
79 ev_duration_integer = lv_duration_int.
80 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION /SAPAPO/SAPLTIMESTAMP /SAPAPO/LTIMESTAMPU08 61
/SAPAPO/TIMESTAMP_DIFFERENCE
4 FORM /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3F17 349
COMPARE_ORDER_HEADER
3 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U03 125
/SAPAPO/CIF_DELTA3_COMP_ORDER
2 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U01 871
/SAPAPO/CIF_DELTA3_COMP
1 EVENT /SAPAPO/CIF_DELTAREPORT3 /SAPAPO/CIF_DELTAREPORT3 189
START-OF-SELECTION
Chosen variables
Name
Val.
No. 5 Ty. FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No. 4 Ty. FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254544445444543222222222222222222
F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3EDear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen. -
Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred
When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
RogérioHi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj -
ALV issue: when save list using Local File command will get run time error!
help!!!!
report list using ALV method when to save this list using Local File.
i will get GETWA_NOT_ASSIGNED run time error information.
how resolve it?
source code :
REPORT ZIFT0103.
TABLES : MARA,MARC,CDHDR,CDPOS,MAKT.
******DEVK909212****************
****利用工厂来区分不同的SERVER的FTP ADDRESS ,user ,PASSWORD
DATA: FTP_WERKS LIKE MARC-WERKS.
********定义一个RANGE用来抓取MARC的信息
RANGES:R_MATNR FOR MARA-MATNR OCCURS 0.
********定义一个INTERNAL TABLE 来抓取MARC 的信息
DATA:BEGIN OF IT_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
FLAG_UI TYPE C,
END OF IT_MARC.
*******定义存放北京的数据的变量
DATA : BEGIN OF FTP_BEIJING OCCURS 0 ,
MATNR(25) ,
MATNR1(25) ,
MAKTX(30) ,
END OF FTP_BEIJING .
******定义福清的数据变量
DATA : BEGIN OF FTP_FUQING OCCURS 0 ,
MATNR(25) ,
MATNR1(25) ,
MAKTX(30) ,
END OF FTP_FUQING .
*******DEVK909212*****************
DATA : BEGIN OF FTP_ITEMDOC1 OCCURS 0 ,
MATNR(25) ,
MAKTX(30) ,
END OF FTP_ITEMDOC1 .
DATA : BEGIN OF FTP_ITEMDOC OCCURS 0 ,
MATNR(25) ,
MATNR1(25) ,
MAKTX(30) ,
END OF FTP_ITEMDOC .
DATA: WA_ZMSGTA TYPE ZMSGTA ,
l_ersda like MARA-ERSDA .
***********DEVK909553********************
****用来决定执行FTP还是显示LIST**********
DATA:g_tcode_flag.
***********DEVK909553********************
Error message process ******************************
DEFINE EXPLAIN_MSG.
break soe_richard.
CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
EXPORTING
ID = &1 "SY-MSGID
NUMBER = &2 "SY-MSGNO
LANGUAGE = SY-LANGU
TEXTFORMAT = &3
LINKPATTERN =
MESSAGE_V1 = &4 "SY-MSGV1
MESSAGE_V2 = &5 "SY-MSGV2
MESSAGE_V3 = &6 "SY-MSGV3
MESSAGE_V4 = &7 "SY-MSGV4
IMPORTING
MESSAGE = &8 "WA_ZMSGTA-MSE1
RETURN =
TABLES
TEXT =
END-OF-DEFINITION.
DEFINE ERROR_MSG_UPDATA.
CALL FUNCTION 'ZINSERT_MSG' "IN UPDATE TASK
EXPORTING
XZMSGTA = &1 "WA_ZMSGTA
EXCEPTIONS
UPDATE_ERROR = 1
OTHERS = 2.
END-OF-DEFINITION.
IF SY-TCODE = 'ZIFT103' .
g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = '请耐心等候,系统正在抓数据'.
ENDIF.
l_ersda = sy-datum - 1 . "取前一天产生的物料号码。
DATA:BEGIN OF it_change OCCURS 0,
OBJECTID TYPE CDHDR-OBJECTID,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
TABKEY TYPE CDPOS-TABKEY,
END OF it_change.
DATA:BEGIN OF it_cDhdr OCCURS 0,
OBJECTID type CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
END OF it_cdhdr.
DATA:search_len TYPE I.
DATA:BEGIN of it_insert OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
END OF it_insert.
DATA:BEGIN OF it_MAKT OCCURS 0,
MATNR TYPE MAKT-MATNR,
MAKTX TYPE MAKT-MAKTX,
END OF it_makt.
DATA IT_MARA TYPE TABLE OF MARA WITH HEADER LINE.
DATA:BEGIN OF IT_OUT OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
MTART TYPE MARA-MTART,
MEINS TYPE MARA-MEINS,
MATKL TYPE MARA-MATKL,
MAKTX TYPE MAKT-MAKTX,
PSTAT TYPE MARA-PSTAT,
BRGEW TYPE MARA-BRGEW,
NTGEW TYPE MARA-NTGEW,
GEWEI TYPE MARA-GEWEI,
FERTH TYPE MARA-FERTH,
KZUMW TYPE MARA-KZUMW,
ERNAM TYPE MARA-ERNAM,
ERSDA TYPE MARA-ERSDA,
END OF IT_OUT.
*-- DECLARE DATA FOR ALV
TYPE-POOLS: slis.
DATA : g_variant LIKE disvariant,
g_save(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE, "
gt_events TYPE slis_t_event,
gt_list_top_of_page TYPE slis_t_listheader,
gs_print TYPE slis_print_alv,
gs_layout TYPE slis_layout_alv .
******只能抓出系统有做更改的数据***************
******而第一次INSERT MARA的数据抓不出来********
START-OF-SELECTION.
SELECT AOBJECTID AUSERNAME AUDATE BTABKEY
INTO TABLE it_change
FROM ( CDPOS AS B INNER JOIN CDHDR AS A ON
AOBJECTCLAS = BOBJECTCLAS AND
AOBJECTID = BOBJECTID AND
ACHANGENR = BCHANGENR )
WHERE A~OBJECTCLAS = 'MATERIAL'
AND A~UDATE = l_ersda
AND B~TABNAME = 'MARC'
AND B~CHNGIND = 'I'.
LOOP AT it_change.
search_len = STRLEN( it_change-TABKEY ).
search_len = search_len - 4.
IF search_len > 0.
IT_MARC-WERKS = it_change-TABKEY+search_len(4).
ENDIF.
IT_MARC-MATNR = it_change-objectid+0(18).
IT_MARC-USERNAME = it_change-username.
IT_MARC-UDATE = It_change-udate.
IT_MARC-FLAG_UI = 'U'.
APPEND IT_MARC.
CLEAR IT_MARC.
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = IT_MARC-MATNR.
APPEND R_MATNR.
ENDLOOP.
****CDPOS is Cluster TABLE 所以没有办法用INNER JOIN******
SELECT OBJECTID CHANGENR USERNAME UDATE
INTO TABLE it_cdhdr
FROM CDHDR
WHERE OBJECTCLAS = 'MATERIAL'
AND UDATE = l_ersda.
AND TCODE = 'MM02'.
LOOP AT IT_cdhdr.
SELECT * FROM CDPOS
WHERE OBJECTCLAS = 'MATERIAL'
AND OBJECTID = IT_CDHDR-OBJECTID
AND CHANGENR = IT_CDHDR-CHANGENR
AND TABNAME = 'MARC'
AND CHNGIND = 'I'.
search_len = STRLEN( CDPOS-TABKEY ).
search_len = search_len - 4.
IF search_len > 0.
IT_MARC-WERKS = CDPOS-TABKEY+search_len(4).
ENDIF.
IT_MARC-MATNR = IT_cdhdr-objectid+0(18).
IT_MARC-USERNAME = IT_cdhdr-username.
IT_MARC-UDATE = IT_cdhdr-udate.
IT_MARC-FLAG_UI = 'U'.
APPEND IT_MARC.
CLEAR IT_MARC.
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = IT_MARC-MATNR.
APPEND R_MATNR.
CLEAR IT_MARC.
ENDSELECT.
ENDLOOP.
IF g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 20
TEXT = '处理好当天CHANGE的数据'.
ENDIF.
*******抓当天做了INSERT的数据*************
*******不需要***********************
SELECT BMATNR BWERKS INTO TABLE IT_INSERT
FROM MARC AS B JOIN MARA AS A
ON AMATNR = BMATNR
WHERE A~ERSDA = l_ersda.
LOOP AT IT_INSERT.
IT_MARC-MATNR = IT_INSERT-MATNR.
IT_MARC-WERKS = IT_INSERT-WERKS.
IT_MARC-FLAG_UI = 'I'.
APPEND IT_MARC.
CLEAR IT_MARC.
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = IT_MARC-MATNR.
APPEND R_MATNR.
ENDLOOP.
IF g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 40
TEXT = '处理好当天INSERT的数据'.
ENDIF.
IF g_tcode_flag = 'L'.
PERFORM get_MAKTX.
PERFORM get_mara.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 100
TEXT = '处理好数据,并开始显示数据'.
PERFORM do_data.
PERFORM display_alv.
ELSE.
PERFORM get_MAKTX.
PERFORM do_ftp.
ENDIF.
*& Form get_marktx
text
FORM get_maktx.
SELECT MATNR MAKTX INTO TABLE IT_MAKT FROM MAKT
WHERE MATNR IN R_MATNR AND SPRAS = '1'.
ENDFORM. "get_marktx
*& Form get_mara
text
FORM get_mara.
SELECT * INTO TABLE it_mara FROM MARA
WHERE MATNR IN R_MATNR.
ENDFORM. "get_mara
*& Form do_data
text
FORM do_data.
SORT IT_MARC BY MATNR WERKS.
DELETE ADJACENT DUPLICATES FROM IT_MARC COMPARING MATNR WERKS.
LOOP AT IT_MARC.
CLEAR IT_MAKT.
CLEAR IT_MARA.
READ TABLE IT_MAKT WITH KEY MATNR = IT_MARC-MATNR.
READ TABLE IT_MARA WITH KEY MATNR = IT_MARC-MATNR.
MOVE-CORRESPONDING IT_MARA TO IT_OUT.
IT_OUT-MAKTX = IT_MAKT-MAKTX.
IT_OUT-WERKS = IT_MARC-WERKS.
IF IT_MARC-FLAG_UI = 'U'.
IT_OUT-ERNAM = IT_MARC-USERNAME.
ENDIF.
APPEND IT_OUT.
CLEAR IT_OUT.
ENDLOOP.
ENDFORM. "do_data
*SELECT AMATNR BMAKTX INTO CORRESPONDING
*FIELDS OF FTP_ITEMDOC1 FROM MARA AS A JOIN MAKT AS B
*ON AMATNR = BMATNR WHERE A~ERSDA = l_ersda
*AND B~SPRAS = '1' . "代表为中文说明。
APPEND FTP_ITEMDOC1.
*******DEVK909212****************
*******添加RANGE*****************
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = FTP_ITEMDOC1-MATNR.
APPEND R_MATNR.
CLEAR FTP_ITEMDOC1.
*******DEVK909212****************
*ENDSELECT.
*******DEVK909212****************
****get WERKS information from MARC*******
*SELECT MATNR WERKS INTO TABLE IT_MARC
*FROM MARC
*WHERE MATNR IN R_MATNR.
*******DEVK909212****************
******DEVK909212****************
**MARK**************************
*LOOP AT FTP_ITEMDOC1 .
MOVE : FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR,
FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR1,
FTP_ITEMDOC1-MAKTX TO FTP_ITEMDOC-MAKTX.
APPEND FTP_ITEMDOC.
CLEAR FTP_ITEMDOC.
*ENDLOOP.
******DEVK909212****************
******DEVK909212***********************************
**根据IT_MARC中信息,往北京和福清的TABLE写数据*****
FORM do_ftp.
LOOP AT IT_MARC.
***福清的
IF IT_MARC-WERKS = '1010' OR IT_MARC-WERKS = '1020'
OR IT_MARC-WERKS = '1023' .
READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
MOVE : FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR,
FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR1,
FTP_ITEMDOC1-MAKTX TO FTP_FUQING-MAKTX.
CLEAR IT_MAKT.
READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
MOVE : IT_MARC-MATNR TO FTP_FUQING-MATNR,
IT_MARC-MATNR TO FTP_FUQING-MATNR1,
IT_MAKT-MAKTX TO FTP_FUQING-MAKTX.
APPEND FTP_FUQING.
CLEAR FTP_FUQING.
ENDIF.
***北京的
IF IT_MARC-WERKS = '1041' OR IT_MARC-WERKS = '1042'.
READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
MOVE : FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR,
FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR1,
FTP_ITEMDOC1-MAKTX TO FTP_BEIJING-MAKTX.
CLEAR IT_MAKT.
READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
MOVE : IT_MARC-MATNR TO FTP_BEIJING-MATNR,
IT_MARC-MATNR TO FTP_BEIJING-MATNR1,
IT_MAKT-MAKTX TO FTP_BEIJING-MAKTX.
APPEND FTP_BEIJING.
CLEAR FTP_BEIJING.
ENDIF.
ENDLOOP.
****清楚重复的数据**********
SORT FTP_FUQING.
DELETE ADJACENT DUPLICATES FROM FTP_FUQING.
SORT FTP_BEIJING.
DELETE ADJACENT DUPLICATES FROM FTP_BEIJING.
***传送数据********
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_FUQING[].
FTP_WERKS = '1010'.
PERFORM ftp_work.
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_BEIJING[].
FTP_WERKS = '1041'.
PERFORM ftp_work.
******DEVK909212***********************************
ENDFORM. "do_ftp
*& Form ftp_work
把以前FTP的工作做一个FORM
*******DEVK909212**************************
FORM ftp_work.
*******DEVK909212**************************
CHECK FTP_ITEMDOC[] IS NOT INITIAL.
FTP function *****************************************************
DATA : HDL TYPE I,
L_SLEN TYPE I ,
ERROR,
KEY TYPE I VALUE 26101957,
DEST TYPE RFCDES-RFCDEST VALUE 'SAPFTPA'.
DATA: FTP_RESULT TYPE TABLE OF TEXT.
DATA: P_FILE TYPE RLGRAP-FILENAME.
DATA: L_USER(16) TYPE C VALUE 'SFIS',
L_PWD(16) TYPE C VALUE 'SFIS',
L_HOST(16) TYPE C VALUE '172.16.31.17'.
*******DEVK909212**************************
*****根据不同的工厂来抓FTP的信息
CALL FUNCTION 'Z_FTP_SFIS'
EXPORTING
BLART = 'S'
WERKS = FTP_WERKS
IMPORTING
HOST = L_HOST
USER1 = L_USER
PASS1 = L_PWD.
*******DEVK909212**************************
CONCATENATE l_ersda '.KP' INTO P_FILE.
SET EXTENDED CHECK OFF.
ERROR = 0.
CHECK HDL IS INITIAL.
Connect to server
L_SLEN = STRLEN( L_PWD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = L_PWD
SOURCELEN = L_SLEN
KEY = KEY
IMPORTING
DESTINATION = L_PWD.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
TEXT = 'Connect to FTP Server'.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = L_USER
PASSWORD = L_PWD
HOST = L_HOST
RFC_DESTINATION = DEST
IMPORTING
HANDLE = HDL
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MOVE: 'B' TO WA_ZMSGTA-BLART,
l_ersda TO WA_ZMSGTA-REFNUMBER,
SY-MSGTY TO WA_ZMSGTA-MSGTY,
'MARA' TO WA_ZMSGTA-TBMA_VAL.
EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
SY-MSGV4 WA_ZMSGTA-MSE1.
ERROR_MSG_UPDATA WA_ZMSGTA.
EXIT.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = HDL
COMMAND = 'ascii'
TABLES
DATA = FTP_RESULT
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3.
IF SY-SUBRC <> 0.
EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
SY-MSGV4 WA_ZMSGTA-MSE1.
MOVE: 'B' TO WA_ZMSGTA-BLART,
l_ersda TO WA_ZMSGTA-REFNUMBER,
SY-MSGTY TO WA_ZMSGTA-MSGTY,
'MARA' TO WA_ZMSGTA-TBMA_VAL.
ERROR_MSG_UPDATA WA_ZMSGTA.
EXIT.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = P_FILE
CHARACTER_MODE = 'X'
TABLES
TEXT = FTP_ITEMDOC
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
SY-MSGV4 WA_ZMSGTA-MSE1.
MOVE: 'B' TO WA_ZMSGTA-BLART,
l_ersda TO WA_ZMSGTA-REFNUMBER,
SY-MSGTY TO WA_ZMSGTA-MSGTY,
'MARA' TO WA_ZMSGTA-TBMA_VAL.
ERROR_MSG_UPDATA WA_ZMSGTA.
EXIT.
ENDIF.
*******DEVK909212**************************
*******CLOSE FTP******************
CHECK NOT HDL IS INITIAL.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
DESTINATION = DEST
EXCEPTIONS
OTHERS = 1.
CLEAR HDL.
ENDFORM. "ftp_work
*******DEVK909212**************************
FORM DISPLAY_ALV .
*-- PREPARE ALV DATA
PERFORM EVENTTAB_BUILD USING GT_EVENTS[].
PERFORM COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
*-- LAYOUT SETTING
PERFORM PREPARE_ALV_FIELD USING GT_FIELDCAT[].
*-- ALV DISPLAY
PERFORM CALL_REUSE_ALV_GRID_DISPLAY.
ENDFORM. " display_alv
*& Form eventtab_build
text
-->P_GT_EVENTS[] text
FORM EVENTTAB_BUILD USING PT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = PT_EVENTS.
READ TABLE PT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
LS_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY PT_EVENTS FROM LS_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM. " eventtab_build
*& Form comment_build
text
-->P_GT_LIST_TOP_OF_PAGE[] text
FORM COMMENT_BUILD USING PT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
L_DATE(30),
l_v_BWKEY like T001W-BWKEY, "Valuation area
l_v_BUKRS like T001K-BUKRS. "Firm/Company
Listenerschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
select single BWKEY
into l_v_BWKEY
from t001w
where WERKS IN s_WERKS.
select single BUKRS
into l_v_BUKRS
from t001k
where BWKEY = l_v_BWKEY.
SELECT SINGLE butxt INTO LS_LINE-INFO
FROM t001
WHERE bukrs = l_v_BUKRS.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '报表名称:'.
LS_LINE-INFO = SY-TITLE.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印日期:'.
WRITE SY-DATUM TO LS_LINE-INFO.
ls_line-info = sy-datum.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印時間:'.
WRITE SY-UZEIT TO LS_LINE-INFO.
ls_line-info = sy-uzeit.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '使用者:'.
LS_LINE-INFO = SY-UNAME.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
ENDFORM. " comment_build
*& Form prepare_alv_field
text
-->P_GT_FIELDCAT[] text
FORM PREPARE_ALV_FIELD USING P_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_LINE TYPE SLIS_FIELDCAT_ALV.
*-- DEFINE MARCO
DEFINE APPEND_ALV_FIELD.
CLEAR LS_LINE.
LS_LINE-FIELDNAME = &1.
LS_LINE-TABNAME = &2.
LS_LINE-REPTEXT_DDIC = &3.
LS_LINE-SELTEXT_L = &3.
LS_LINE-SELTEXT_M = &3.
LS_LINE-SELTEXT_S = &3.
LS_LINE-QFIELDNAME = &4.
LS_LINE-QTABNAME = &5.
LS_LINE-NO_OUT = &6.
LS_LINE-NO_ZERO = &7.
LS_LINE-OUTPUTLEN = &8.
APPEND LS_LINE TO P_FIELDCAT.
END-OF-DEFINITION.
APPEND_ALV_FIELD: 'MATNR' 'IT_OUT' '料号'
'O' 'X' ''.
APPEND_ALV_FIELD: 'WERKS' 'IT_OUT' '工厂'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MTART' 'IT_OUT' 'MTyp'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MEINS' 'IT_OUT' 'BUn'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKL' 'IT_OUT' '物料组\分群码'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKX' 'IT_OUT' '物料描述'
'O' 'X' ''.
APPEND_ALV_FIELD: 'PSTAT' 'IT_OUT' '维护状态'
'O' 'X' ''.
APPEND_ALV_FIELD: 'BRGEW' 'IT_OUT' '毛重'
'O' 'X' ''.
APPEND_ALV_FIELD: 'NTGEW' 'IT_OUT' '净重'
'O' 'X' ''.
APPEND_ALV_FIELD: 'GEWEI' 'IT_OUT' 'WUn'
'O' 'X' ''.
APPEND_ALV_FIELD: 'FERTH' 'IT_OUT' '对外机种名'
'O' 'X' ''.
APPEND_ALV_FIELD: 'KZUMW' 'IT_OUT' '高关税标识'
'O' 'X' ''.
APPEND_ALV_FIELD: 'ERNAM' 'IT_OUT' '创建者'
'O' 'X' ''.
APPEND_ALV_FIELD: 'ERSDA' 'IT_OUT' '创建日期'
'O' 'X' ''.
ENDFORM. " prepare_alv_field
*& Form call_reuse_alv_grid_display
text
--> p1 text
<-- p2 text
FORM CALL_REUSE_ALV_GRID_DISPLAY .
gs_layout-f2code = 'DISPLAY'.
gs_print-no_print_listinfos = 'X'.
gs_layout-colwidth_optimize = 'X'. "列宽度自动根据内容优化
gs_layout-f2code = '&ETA'. "double check弹出详细信息
gs_layout-zebra = 'X'. "清单条纹显示
gs_layout-no_vline = ''. "是否显示列间隔线
gs_layout-box_fieldname = ''. "是否显示checkbox
gs_layout-confirmation_prompt = ''. "推出清单是否提示
gs_layout-detail_titlebar = '详细信息'."详细清单的标题
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_CALLBACK_PF_STATUS_SET = 'ALV_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'ALV_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = GT_LIST_TOP_OF_PAGE[]
IT_FIELDCAT = GT_FIELDCAT[]
IT_EVENTS = GT_EVENTS[]
I_STRUCTURE_NAME = 'IT_OUT'
I_SAVE = 'A'
IS_LAYOUT = GS_LAYOUT
IS_PRINT = GS_PRINT
TABLES
T_OUTTAB = IT_OUT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_reuse_alv_grid_display
*& Form PREPARE_ALV_FIELD
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "TOP_OF_PAGEHi,
Please check your field catalog and refer field names once again.
Check spelling, or Check strucutre properly.
There are something wrong in your catalog definition
aRs. -
Dear ALL,
When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
we are getting following run time error
Hoe to resolve this?
Runtime Errors SAPSQL_INVALID_FIELDNAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 15.01.2009 16:04:19
Short dump has not been completely stored (too big)
Short text
A dynamically specified column name is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ALAND" does not exist in any of the database tables from the FROM clause.
How to correct the error
Check the field name in the SELECT clause.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"
"SAPLV61Z" or "LV61ZU01"
"SEL_KONDTAB"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "slgsap-prd"
Network address...... "10.140.1.11"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SLGSAP-PRD"
Database type..... "MSSQL"
Database name..... "PRD"
Database user ID.. "prd"
Terminal................. "SD0123l"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 6 2008 00:13:21"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 159
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 20949200
Heap.... 0
Page.... 196608
MM Used. 15928048
MM Free. 828016
User and Transaction
Client.............. 900
User................ "ADMIN"
Language key........ "E"
Transaction......... "VA01 "
Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"
Program............. "SAPLV61Z"
Screen.............. "SAPMV45A 4900"
Screen line......... 930
Information on where terminated
Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".
The main program was "SAPMV45A ".
In the source code you have the termination point in line 672
of the (Include) program "LV61ZU01".
The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in
procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV61Z "; its source code begins in line
260 of the (Include program "LV61ZU01 ".
Source Code Extract
Line SourceCde
642 if se_prestep = yes or
643 se_read_only_one_record = yes.
644 if t681-ksdat is initial.
645 if se_read_all_prestep is initial.
646 select * from (t681-kotab) appending table <cond_tab>
647 up to 1 rows
648 where kappl = se_kappl
649 and kschl = se_kschl
650 and (coding_tab).
651 h_subrc = sy-subrc.
652 else.
653 select * from (t681-kotab) appending table <cond_tab>
654 where kappl = se_kappl
655 and kschl = se_kschl
656 and (coding_tab).
657 endif.
658
659 * it is enough to find one record in prestep
660 * (care must be taken with pool tables - depending on database this
661 * will cost performance instead of saving)
662 if select_split ne 0 and h_subrc ne 0.
663 modify coding_tab from coding_alter index select_split.
664 select * from (t681-kotab) appending table <cond_tab>
665 up to 1 rows
666 where kappl = se_kappl
667 and kschl = se_kschl
668 and (coding_tab).
669 endif.
670 else.
671 if se_read_all_prestep is initial.
>>>>> select * from (t681-kotab) appending table <cond_tab>
673 up to 1 rows
674 where kappl = se_kappl
Regards,
Akshay
Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
Edited by: Akshay Dalal on Jan 17, 2009 6:30 AMDear Akshay,
We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely. -
Hi,
while runing t,code FBZ5 , i am getting this run time error.
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 30.05.2009 13:12:34
Short text
Function module "OTF_LIST" not found.
What happened?
The function module "OTF_LIST" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSTXC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "OTF_SEND_SPOOL" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLSTXC" contains the CALL FUNCTION statement.
The name of the function module to be called is "OTF_LIST".
No function module exists with the name "OTF_LIST".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attention to
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
Line SourceCde
241 unknown_font = 2
242 others = 3.
243 if sy-subrc <> 0.
244 perform internal using 'OTF_SOFT_FONT_GET' sy-subrc.
245 endif.
246
247 * insert in otf table before(!) font call, i. e. append
248 check not otf[] is initial.
249 append lines of l_sfont to otf[].
250
251 endform.
252
253
254 form otf_send_spool tables otfdata structure itcoo
255 using param structure itcpp.
256 data: l_parlen type i,
257 l_dummy(1) type c,
258 l_mult type i,
259 l_actmult type i,
260 l_cp type tcp00-cpcodepage.
261
262 * right-to-left conversion
263 if itcpp-tdrtl = true. "RTL
264 if spool_external_print <> true. "RTL
265 perform otf_rtl_layout tables otf. "RTL
266 endif. "RTL
267 endif. "RTL
268 * use old 2.0 ABAP driver or spooler c-routines
269 if param-tdotfcall <> space.
270 check param-tddest <> c_dest_null.
>>>>> call function param-tdotfcall
272 tables otf = otfdata
273 exceptions others = 1.
274 if sy-subrc ne 0.
275 perform fatal.
276 call function 'SAPSCRIPT_MESSAGE'
277 exporting typ = 'A'.
278 endif.
279 else.
280 check param-tddest <> c_dest_null.
281
282 describe field l_dummy length l_mult in byte mode.
283 l_actmult = l_mult.
284
285 loop at otfdata.
286 case otfdata-tdprintcom.
287 when pc_id_string.
288 if c_unicode = false.
289 l_parlen = 7 + otfdata-tdprintpar+5(2).
290 else.
Regards,
baluHi,
Kindly check in debug wht the non existent FM 'OTF_LIST' is getting called?
Probably this seems to be a dynamic call to some FM and the FM name is not getting generated properly.
Regards,
Ankur Parab -
Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.
Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors CONVERSION_CODEPAGE_UNKNOWN
Date and Time 03.06.2008 14:27:46
|Short text
| Unable to convert from code page ' ' to code page '4103'. |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
| TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM RSDBSPVD RSDBSPVD 119
IMPORT_VARIANT_STATIC
3 FORM SAPLSVAR LSVARF07 522
IMPORT_VAR_SELC
2 FUNCTION SAPLSVAR LSVARU07 80
RS_VARIANT_CONTENTS
1 EVENT RS_VARIANT_VALUES RS_VARIANT_VALUES 22
| START-OF-SELECTIONSorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read = 1053698
Number of rows skipped = 0
Number of rows loaded = 1053698
Number of rows rejected = 0
Number of rows deleted = 0
Number of rows committed = 1053698
Do you think that convert codepage errore is due to this warning message? -
Frequent run-time errors during audio recording
While recording audio voice-over for a slide, I'll often do
several "takes" before finding the best one. All too frequently,
when I click OK, I encounter a run-time error that terminates the
Captivate 2 software. I've done the default installation on two
machines and encountered the same problem on both. Are other users
running into this problem as well? Any fixes / workarounds to
suggest? Is this problem fixed with Captivate 3?
Below is the message that appears.
Title Bar: Microsoft Visual C++ Runtime Library
Messaqe Text: Program: C:\Program Files\Adobe\Adobe Captivate
2\AdobeCaptivate.exe
This application has requested the Runtime to terminate it in
an unusual way. Please contact the application's support team for
more information.
Any input would be greatly appreciated. Thanks!Hi folks,
The first thing I would do is to remove the .dat file that
can be found via the following path:
C:\Document and Settings\Username\Application
Data\Adobe\Adobe Captivate\
Rename the captivate_v20.dat to something like
Old_captivate_v20.dat and then start up Adobe Captivate.
If this doesn't address the problem then report this as a bug
using the
Adobe
Captivate Feature Request/Bug Report Form
Let us know how you get on.
Best - Mark -
Run time Errors GETWA_NOT_ASSIGNED at Time of Print Reports.
Hello hy All experts.
I ma trying to print Reports, but at time of preview i got an error message. Run time Errors GETWA_NOT_ASSIGNED.
Please Give me Solutions.
Thnks
Bhavesh Panchal.
BarodaFORM fetch_data.
break mtabap.
SELECT *
FROM vbep
INTO TABLE it_vbep
WHERE edatu IN so_edatu
AND vbeln IN so_vbeln.
IF NOT it_vbep[] IS INITIAL.
SELECT *
FROM vbak
INTO TABLE it_vbak
FOR ALL ENTRIES IN it_vbep
WHERE vbeln = it_vbep-vbeln
AND kunnr IN so_kunnr.
ENDIF.
IF NOT it_vbak[] IS INITIAL.
SELECT *
FROM vbpa
INTO TABLE it_vbpa
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln
AND posnr = space.
SELECT *
FROM vbap
INTO TABLE it_vbap
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln.
Select all Customer Data
SELECT * FROM kna1 INTO TABLE it_kna1
FOR ALL ENTRIES IN it_vbak
WHERE kunnr = it_vbak-kunnr .
SELECT *
FROM vbkd
INTO TABLE it_vbkd
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln.
and posnr = IT_VBAP-POSNR.
SELECT *
FROM vbbe
INTO TABLE it_vbbe
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln
AND posnr = it_vbap-posnr.
SELECT *
FROM vbup
INTO TABLE it_vbup
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln
AND posnr = it_vbap-posnr.
SELECT *
FROM konv
INTO TABLE it_konv
FOR ALL ENTRIES IN it_vbak
WHERE knumv = it_vbak-knumv
AND kinak = space .
SELECT *
FROM vbrp
INTO TABLE it_vbrp
FOR ALL ENTRIES IN it_vbak
WHERE aubel = it_vbak-vbeln.
IF NOT it_vbrp[] IS INITIAL.
SELECT * FROM likp
INTO TABLE it_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
SELECT * FROM lips
INTO TABLE it_lips
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel
AND posnr = it_vbrp-vgpos.
ENDIF.
ENDIF.
LOOP AT it_vbap.
itab-posnr = it_vbap-posnr.
itab-posar = it_vbap-posar.
ITAB-BRGEW = IT_VBAP-BRGEW.
itab-brgew = it_vbap-brgew.
itab-ntgew = it_vbap-ntgew.
READ TABLE it_vbak WITH KEY vbeln = it_vbap-vbeln.
itab-vbeln = it_vbak-vbeln.
itab-netwr = it_vbak-netwr.
itab-kunnr = it_vbak-kunnr.
READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln.
itab-edatu = it_vbep-edatu.
READ TABLE it_kna1 WITH KEY kunnr = it_vbak-kunnr.
itab-name1 = it_kna1-name1.
READ TABLE it_vbkd WITH KEY vbeln = it_vbap-vbeln .
itab-bstdk = it_vbkd-bstdk.
itab-bstkd = it_vbkd-bstkd.
READ TABLE it_vbrp WITH KEY aubel = it_vbap-vbeln aupos = it_vbap-posnr.
READ TABLE it_lips WITH KEY vbeln = it_vbrp-aubel posnr = it_vbrp-aupos.
itab-delivery = it_lips-vbeln.
itab-lfimg = it_lips-lfimg.
READ TABLE it_likp WITH KEY vbeln = it_vbrp-aubel .
itab-lfdat = it_likp-lfdat.
itab-ntgew = it_likp-ntgew.
break mtabap.
READ TABLE it_vbup WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-lfsta = it_vbup-lfsta.
READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-wmeng = it_vbep-wmeng .
itab-bmeng = it_vbep-bmeng.
READ TABLE it_vbbe WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-omeng = it_vbbe-omeng .
READ TABLE it_konv WITH KEY knumv = it_vbak-knumv
kposn = it_vbap-posnr
kschl = 'PR00'.
ITAB-KBETR = IT_KONV-KBETR / 10. " CONDITION RATE
itab-kbetr = it_konv-kbetr.
itab-kwert = it_konv-kwert . "CONDITION VALUE
itab-pending_val = ITAB-OMENG * ITAB-KWERT .
itab-pending_val = itab-omeng * itab-kbetr .
APPEND itab.
ENDLOOP.
ENDFORM. "data_retrieval
*& Form build_listheader
text
-->IT_LISTHEADER text
Show quoted text -
FORM build_listheader USING it_listheader TYPE slis_t_listheader.
DATA HLINE TYPE SLIS_LISTHEADER.
DATA: ls_line TYPE slis_listheader.
bhavesh
HLINE-INFO = 'report Developed by Bhavesh'.
HLINE-TYP = 'H'.
Header
Bhavesh
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Sales ORDER Report'.
APPEND ls_line TO it_listheader.
bhavesh
***Selection
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
ls_line-key = 'Key 2'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
***Action
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Status list'.
APPEND ls_line TO it_listheader.
ENDFORM. "BUILD_LISTHEADER
*ENDFORM. "build_listheader
*& Form display
*& text
FORM display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = alv_layout
it_fieldcat = i_fieldcat
it_events = gt_events[]
i_callback_user_command = 'USER_COMMAND'
i_grid_title = 'BHAVESH REPORT'
TABLES
t_outtab = itab[].
CLEAR : itab .
ENDFORM. "display
*& Form top_of_page
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader[].
i_logo = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE -
REP-1437: Run time error in the PL/SQL development environment (DE).
I have a report that has always worked. Now I get the following error
REP-0003: Warning: Unable to open global preference file.
Starting report STCONF6 [Mon Nov 10 21:38:59 2008] ...
REP-1437: Run time error in the PL/SQL development environment (DE).
PDE-PSD001 Could not resolve reference to <Unknown Program Unit> while loading <Unknown> <Unknown>.
End report STCONF6 [Mon Nov 10 21:39:10 2008].
What is it? I DON'T know.
Regards SILVIAI recall my report from a form, I get the parameter form with my parameters, then click on the traffic light to run and the error appears here
Silvia -
Run time error for program: RPCALCU0_CE
Hi Abapers,
When we execute the standard program: RPCALCU0_CE from SE38. Below run time error is getting trigerred before selection screen is displayed. Below are the run time error details -
Runtime Error UNCAUGHT_EXCEPTION
Exception CX_HRPA_INVALID_PARAMETER
Occurred on 08/04/2010 at 01:22:17
What happened?
The exception 'CX_HRPA_INVALID_PARAMETER' was raised but was not caught at any
stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_HRPA_RESOLVE_EXCEPTION=====CP', had to
be terminated.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_HRPA_INVALID_PARAMETER',
was neither
caught nor passed along using a RAISING clause, in the procedure
"RESOLVE_EXCEPTION" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Invalid parameter EXCEPTION, value
The occurrence of the exception is closely linked to the occurrence of a
previous exception, "CX_HRPA_VIOLATED_PRECONDITION", which occurred in the
program "CL_HRPA_MASTERDATA_FACTORY====CP" -
specifically in line 6 of the (Include) program
"CL_HRPA_MASTERDATA_FACTORY====CM004".
The reason for the exception was:
Precondition violated
Please suggest the solution to overcome this.Hey,
I could not figure your exact problem. But you can go to the transaction ST22 to take a better look at the error that you got. This gives a detailed explanation of the exact error that you are getting. The moment you enter this transaction, you will see the number of runtime errors you got today. Just click on 'Today'. This will give you the list of runtime errors. Click on the relevent error and you can get a much more detailed explanation of the same.
Hope this helps.
Maybe you are looking for
-
How do I open a frame in a new window or tab?
I want to be able to open frames into their own tabs or window... So how do you do this, or is Firefox NOT CAPABLE of this... i.e. it's LAME and should be shot? (=:] How do I open a frame in a new window or tab? ======================== Basically...
-
Upgraded to Firefox6 a week ago when "suggested" by pop-up screen. Since then, computer will not open gmail using Mozilla but will access it through IE. I get the following message:- * The connection has timed out * The server at www.google.com is ta
-
New eCATT page on SDN / eCATT forum
Hi all, we have recently created a new SDN page on eCATT: [eCATT: The Extended Computer Aided Test Tool.|eCATT: The Extended Computer Aided Test Tool] Comments and proposals for improvement are welcome. Additionally eCATT related questions should in
-
Hi ABAP Gurus, I have the following code. DATA: BEGIN OF i_p0000 OCCURS 0, pernr LIKE pa0000-pernr, begda LIKE pa0000-begda, endda LIKE pa0000-endda. DATA: END OF i_p0000. DATA: v_date_from TYPE d, v_date_to
-
Iweb : site en 2 parties ?
j'ai créé un site avec 2 parties une sans mot de passe et une avec mot de passe. Comment faire pour avoir accèse à la partie avec mot de passe ? Est-ce possible ?