Run time error in TestStand

Hi ,
I am getting run time error in teststand can any one suggest me how to use the #NoValidation directive in the expression?
I was executing the same seq before but now i am getting error and it is getting strack when it comes to Action step( VI call) .
Thanks in advance
Manasa

http://zone.ni.com/reference/en-XX/help/370052N-01/tsfundamentals/infotopics/novalidation/
#NoValidation only applies to edit time. Not Run Time. You will still get the error. #NoValidation is great for runstate variables that don't exist during edit time but will exist during run time. This way the sequence analyzer will not report these as errors.
Hope this helps!
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

Automatic Retry run-time error step in TestStand

Hi, I am using an instrument at many places in my sequence (let's say 5 times). I am using the Labview instrument driver. Sometimes (every 50 calls), the instrument driver call gives me a run-time error because the instrument is somehow busy. But usually by doing a retry on the step that caused the run-time error, it works. However, in few cases, the instrument is really defective. In order to make my sequence more robust, I want all that handled in TestStand (I want the operator to stay away from the big grey popup. Many of them freaks out when they see this…). I was thinking adding 2 callbacks to my sequence: 1) Post run-time error: a. If local “index” == 1, run cleanupb. If “index” == 0, retry the current step (by manipulating the current step id)c. Incrementing “index” to 12) Post step:a. If step.Result.Status != “Èrror”, ”index” = 0 Index is a local variable in my sequence This algo might work, but is there another way of doing this? You can loop on the failures, but not on the errors.
Thanks
Alexandre

Alexandre,
there are many ways to accomplish your task.
Here's a small list:
- Disable default error handling and "do error handling in your sequence" (using gotos with precondition)
- Use the SequenceFilePostStepRuntimeError Callback
- Handle the retry-functionality within your codemodule
I'd suggest you to choose either the second or third option. As Juergen already stated, you can alter the behaviour of TS in regard to runtime errors. The default behaviour displays a dialog asking the operator on how to react. On automated systems, this setting is nonsense, therefore it is suggested to switch to "Run Cleanup". I wouldn't choose any other setting here.
Using the Callback Sequence is nice since it can be used in a very general way and you can call certain alternativ test strategies if the instrument fails to work.
Implementing the error handling within the codemodule nevertheless optimizes execution times and could be better in other aspects as well. But on the other side, you have to deside what should happen if the error cannot be solved by the module itself.....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Run time error running Vision Builder AI inspection from TestStand

Hello,
I have TestStand 3.1 and Vision Builder for AI v2.6.1.
I would like to run from TestStand a Vision Builder Program or steps. For to achieve that, I have followed the instructions on Application Note 215, Running a Vision Builder AI Inspection from TestStand.
After installation, the option in TestStand InsertStep>NI Vision Builder AI>Inspection works properly.
But when try to execute a step with that inspection, and whatever operation of that one, the result is the following error:
Run-Time Error
Details: Error executing substep 'Post'.
An error occurred calling 'ExecuteStep' in '_NIVBAITestStandSteps' of 'NIVBAITestStandAPI'.
Error Code: -2147417851; User defined code. Possible System Error: The server sent an exception.
At this point really I don´t know what to do, and I don't find any extra help apart of application note.
I will appreciate some suggestion.
Gonzalo.

Hello,
I've found some more information that may help. Since these TestStand steps are simply call a DLL with an exported ActiveX API, path issues may exist. In fact, the overwhelming number of times this error appears, paths seems to be the case. I am not sure why the error is an indication of a path issue, but that seems to be the case. I would recommend that you would reregister the DLL, this time in the same directory as the example sequence. To do this:
- Unregister the current DLL by going to Start Menu>>Run, and typing: regsvr32 /u NIVBAITestStandAPI.dll
- Move the DLL from the system32 folder to the folder in which the example sequence is saved.
- Reregister the DLL from the run command (regsvr32 <folder path>\NIVBAITestStandAPI.dll)
- Restart TestStand if it is open
I apologize for not having any concrete answers, but this one is proving tough without me being able to replicate the issue.
crisR

Run Time Errors (Don't show this dialog again...)

We often create some long TestStand (TS 4.0) sequences and run them overnight or weekend.  Occasionally, for one reason or another, we may see the "Run Time Error" messagebox pop up, stopping the test sequence.
If you then select the checkbox in the Run Time Error window "Don't show this dialog again for this execution", the sequence will continue.
Is there a way to set up TestStand to ALWAYS ignore the Run Time Errors and just generate a failure error instead?
     Setup for TestStand as a confuguration?
or
     Setup as a command in our Custom Steps?
Mikef

Hi Mikef,
One solution would be to use the SequenceFilePostStepRuntimeError callback sequence. Have a look at the example ErrorHandlerExample.seq in the TestStand\Examples\Callbacks\PostStepRuntimeErrorCallback folder.
Obviously you wont what a dialog to appear, but using the callback, you can reset the Step.Result.Error, maybe set the status and record that an error did occur in the Steps ReportText.
Hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer

Break execution after custom run-time error handler callback

I am using Teststand 2010 SP1 and have written a custom runtime error handler based on the ErrorHandlerExample example that ships with TestStand. It has been implemented as a StationPostStepRuntimeError callback in my Station Callbacks folder. I have modified the example as follows:
(1) Added code to turn off the UUT transmitter if it was on.
(2) Added a call to an executable that sends an email to the currently logged in user.
(3) Calls the standard TestStand run-time error dialog using the Engine DisplayRunTimeErrorDialog method.
(4) Processes the user's selection, then turns on the UUT transmitter for any option other then Abort.
The callback also checks the status of the Break and "Don't Show again for this execution" options selected by the user. If the user selects Break then the only option I can find is to call the API Execution.Break() method which breaks the execution right there in my callback. The user then has to single step there way out of the callback. Is there a way of instructing TestStand to complete the callback execution and break immediately after completing the callback (i.e.at the step following the error)? I've zipped up and attached my modified sequence.
Alternatively, is there a better way of doing this?
Regards,
David
Solved!
Go to Solution.
Attachments:
StationCallbacks.7z ‏13 KB

Didn't have a chance to try it yet but maybe StepOut is your solution?
From the TS Help:
StepOut Method
Syntax
Execution.StepOut
Purpose
Resumes the execution from a suspended state and then suspends the execution again after execution of the current sequence completes.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Run-time error calling TestComplete

Hi,
I have a COM interface setup between TestStand and another software (TestComplete). The two software were working and communicating well together for few month. But yesterday I received an "error occurred calling TestComplete Library- Testcomplete in playing state." Please see attachment.
I have all the test scripts running on a network drive, never had a problem before. What could be the cause of the problem? Any help would be greatly appreciated!
Best Regards,
ph2
Attachments:
run-time error msg.doc ‏38 KB

Hi Ph2,
I hope you are doing well today! As Ray has mentioned, it does seem that this error is being caused due to the current state that your TestComplete software is in when trying to communicate with it. I am not familiar with TestComplete myself, but the specific dialog of the error, "An error occurred calling 'RunRoutineEx' in 'ItcIntegration' of 'TestCompleteLibrary' TestComplete is already in the playing state," sounds like it might be trying to put the TestComplete program in the play state while it is already in this state.
The best bet would be to touch base with Smartbear as this does not look like a TestStand specific error. I hope this helps, Ph2. Have a great day!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

RUN TIME error - Error code: system level exception -17502

1. During running of my sequence in a TestStand Operator Interface   i got following run-time error:
    Details: Error executing substep 'Post'.Parameter 'Input cluster 6 [OUT]': System Level Exception.
    Location: Step 'sequence 'SequenceFilePostStep' in 'Sequence X.seq'
    In my SequenceFilePostStep i transfer some information between the LabVIEW 8.0 and TestStand 3.5.
    In my xxx.vi I have 6 clusters and every cluster from 14 to 20 variables.
   The cluster #6 has 70 variables.
   Perhaps, the error that i got is from cluster #6 due to 70 variables? is it to much for cluster?
2. What can i check? How i can fix it?
Please ask questions if you do not understand something, i am want to resolve it!
   Thank you to all!
Message Edited by Yuri_IL on 07-30-2006 10:54 AM
Thank you & Best Regards
*I use LabVIEW 8.X & TestStand 3.5/4.0.1 versions only

Thank you Sam R,
I think that error caused due the overflowing of some string that i have in my cluster.
Because i also get I/O open file error and the name of that file i hold at my cluster.
Do you think that the incorrect string can caused to that system level exception error?
p.s. screenshot is attached
Thank you & Best Regards
*I use LabVIEW 8.X & TestStand 3.5/4.0.1 versions only
Attachments:
io_error.JPG ‏11 KB

I get run time error in step Set Report in reportgen_xml sequence

I get run time error in step "Set Report" in reportgen_xml.seq. The error code is "Out of memory".
I don't know what to do.
I use BatchModel, I have 6 batch loops. The problem appears on the 3d loop. I have NI 3.5.
Help me!!!!!!
I send attachment (screen of error).
Attachments:
problem.jpg ‏106 KB

Hi Terry, it happened again :-(
Actually I see that the problem appeares in the same subsequence of my sequence. In that subsequence I have approximately 25 numeric steps, 6 of them are on skip now.
The problem appeares suddenly after many batch loops. I have the message "Error, Parameter new value: Out of memory. [Error code -17000, out of memory].
After that on next loop I see it runs and writes reports for others subsequences and steps, but on the "problem subsequence" again I get message "Out of memory"...
At the one of the problem loops I saw other message "An error occured calling 'Process One Result' in ITSO FlyReportGen of TestStand on-the-Fly-Report-Generator. Out of memory. Source: TSOTFRG [Error Code: -17000, Out of memory].
I use "Discard Results or Disable Results " enable option in the ModelOptions. But without success. Is this a problem of TestStand or may be is this the special problem of my subsequence or any step in that subsequence?

Make Custom (Run-Time Error Dialog Box)

I would like to Customize the Run-Time Error Dialog Box
bcos I want to use H/Wbuttons (need to Init the H/W) & not mouse to navigate thr the box
is the Dialog box available in Labview also

Hello aparab,
You won't be able to edit the dialog in LabVIEW for sure. Not sure if NI provide CVI / C++ source for that.
You can have your own dialog by handling the run-time error using SequenceFilePostStepRuntimeError callback. Look at this example:
http://zone.ni.com/reference/en-XX/help/370052M-01/tsexamples/infotopics/callbacks_sequencefileposts...
The example ships with TestStand as mentioned in the above link. You just have to use the information which will be in Parameters.Step container for error details and to customise your dialog.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Getting run time error in organizer Photoshop Elements 5.0??

How do I fix run time error for Adobe PhotoShop Elements
5.0 when I pull up organizer?

What operating system?

Run time error

Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors         ASSERTION_FAILED
Date and Time          13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
    involving the ASSERT statement that should not occur. A runtime error
    occurred, either because there was no activation ID entered or because
    the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
    of the first 8 fields is as follows:
    " (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
    "/SAPAPO/TIMESTAMP_DIFFERENCE"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
    Network address.......... "172.16.10.47"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "0002BFAAD700"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 0
    Short dump setting....... "full"
Database server.......... "scmprd"
    Database type............ "ORACLE"
    Database name............ "SCP"
    Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
    Created on............... "Jan 18 2006 20:47:39"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
Patch level.............. "109"
    Patch text............... " "
Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
    Roll..................... 16192
    EM....................... 196923232
    Heap..................... 0
    Page..................... 98304
    MM Used.................. 186636840
    MM Free.................. 1895288
    SAP Release.............. "640"
User and Transaction
Client.............. 950
    User................ "SCMATP"
    Language key........ "E"
    Transaction......... "/SAPAPO/CCR "
    Program............. "/SAPAPO/SAPLTIMESTAMP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
     "/SAPAPO/TIMESTAMP_DIFFERENCE".
    The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
     program "/SAPAPO/LTIMESTAMPU08"
    of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
     610).
Source Code Extract
Line SourceCde
31     lv_time_int_low      TYPE i,
   32     lv_timediff_int      TYPE i,
   33     lv_datediff_int      TYPE i,
   34     lv_time              TYPE t,
   35     ls_time              TYPE tstr_timestr.
   36
37 * check timestamp parameter
   38 * ASSERT NOT iv_timestamp_high IS INITIAL.
   39 * ASSERT NOT iv_timestamp_low IS INITIAL.
   40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
   41   IF iv_timestamp_high IS INITIAL
   42   OR iv_timestamp_low IS INITIAL.
   43     RAISE invalid_parameter.
   44   ENDIF.
45   IF iv_timestamp_high < iv_timestamp_low.
   46     RAISE invalid_parameter.
   47   ENDIF.
48
49 * prepare timestamps
   50 * .. split into date and time integers
   51   ls_timestamp_high = iv_timestamp_high.
   52   lv_date_int_high = ls_timestamp_high-date.
   53   lv_time_int_high = ls_timestamp_high-time.
   54   ls_timestamp_low = iv_timestamp_low.
   55   lv_date_int_low   = ls_timestamp_low-date.
   56   lv_time_int_low   = ls_timestamp_low-time.
   57
58 * .. calc date diff
   59 * .. check against max. allowed integer difference
   60   lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>>   ASSERT lv_datediff_int <= lc_datediff_intmax.
   62
63 * calc time diff
64   lv_timediff_int = lv_time_int_high - lv_time_int_low.
   65   IF lv_timediff_int < 0.
   66     ADD 86400 TO lv_timediff_int.
   67     SUBTRACT 1 FROM lv_datediff_int.
   68   ENDIF.
69
70 * calc total duration
   71   lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
   72   lv_time = lv_timediff_int.
   73   ls_time = lv_time.
   74   ls_duration-hours   = lv_duration_int DIV 3600.
   75   ls_duration-minutes = ls_time-minute.
   76   ls_duration-seconds = ls_time-second.
   77
78   ev_duration_packed = ls_duration.
   79   ev_duration_integer = lv_duration_int.
   80 ENDFUNCTION.
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
5 FUNCTION     /SAPAPO/SAPLTIMESTAMP               /SAPAPO/LTIMESTAMPU08                  61
      /SAPAPO/TIMESTAMP_DIFFERENCE
    4 FORM         /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3F17                349
      COMPARE_ORDER_HEADER
    3 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U03                125
      /SAPAPO/CIF_DELTA3_COMP_ORDER
    2 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U01                871
      /SAPAPO/CIF_DELTA3_COMP
    1 EVENT        /SAPAPO/CIF_DELTAREPORT3            /SAPAPO/CIF_DELTAREPORT3              189
      START-OF-SELECTION
Chosen variables
Name
Val.
No.       5 Ty.          FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No.       4 Ty.          FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254544445444543222222222222222222
    F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
    X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3E

Dear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen.

Interface Mapping run time error...java.lang.nullpointerException thrown

Hi,
I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
Interface Mapping run time error...java.lang.nullpointerException thrown during application mapping.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>CAMEL_BS_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>Camel_BService_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
- <SAP:Mapping notRequired="M">
<SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
<SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
<SAP:SP>-1</SAP:SP>
</SAP:Mapping>
</SAP:Receiver>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
<SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
<SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070108</SAP:Date>
<SAP:Time>224350</SAP:Time>
<SAP:Host>gbdci550</SAP:Host>
<SAP:SystemId>PI7</SAP:SystemId>
<SAP:SystemNr>03</SAP:SystemNr>
<SAP:OS>AIX</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>014</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>002</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
<SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>168</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>67</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
<SAP:Serialize_Children>X</SAP:Serialize_Children>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- 
<Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MainDocument</SAP:Name>
<SAP:Description />
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Please I request to give me some hint how to troubleshoot this issue.
Thanks a lot,
Srujan

Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
Here is the Java exception
Mappage d'interface
Can someone be helpful for that ?
Regards
Laurent
Message was edited by:
Laurent Gitton

Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
Run-Time error '-2147417848 (80010108)
Automation error
The object invoked has disconnected from its clients.
CR exits after this error message.
I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
Anyone ever had this?
Thank you,
R.

Is this still an issue?

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

Xml Publisher run time error '5148'

Dear
I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
run time error '5148'
The number must be between 1 to 63
I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
Please help on this regard. thanks in advance.

Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
So - Import them, a few at a time. Then move them all into one group and you're good to go.

Run time error in TestStand

Similar Messages

Maybe you are looking for