Run time error in Web Application design

I have several run time errors whe I deal with big web templates in WAD. Sometimes the error raises when i try to move in html section of the web template (run time error 5: invalid procedure call or argument), some time when i try to open the template (run time error 9: subscript out of range).Did someone have the same problem? I saw a forum specking about librfc.dll file, but i couldn't find many details.
Thanks.
Valentina

hi V.,
support package level for front end 3.5 ?
you can check in bex, 'business explorer'->help->about.
the info version 3500.x.yy; x is the support package level.
i have tried to use front end 3.5 to access bw 3.0, WAD open like to errors, after patch 7 applied, seems ok.
you may try with front end 3.0b
hope this helps.

Similar Messages

TS1277 I recently allowed an iTune update to be downloaded to my PC. SInce then I'm getting a Run time Error "R6034 An application has made an attempt to load the C runtime library incorrectly." THen I cannot run iTunes.

I recently allowed an iTune update to be downloaded to my PC. SInce then I'm getting a Run time Error "R6034 An application has made an attempt to load the C runtime library incorrectly." Then I cannot run iTunes. I tried "fixing" it, "Un-installing and re-installing iTunes. Still getting the same message and not able to run iTunes.

Follow the directions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

Error in Web application designer in BI7.0

Hi,
If we try to create the template and save, it is showing the following error.
JAVA COMMUNICATION ERROR RFC_DESTINATION IS NOT CONFIGURED.
we tried some RFC connections in the backend . It is showing BI metadata for BSM is outdated. I checked the necessary settings according to note :888687.
But we are able to check the RFC connection between ABAP and portal.
But we are getting the same error. While saving the template which created. it showing the error and i am not able to save the template
Please help in this issue..
thanks in advance.
Regards,
Mohankumar.G

I was working on similar issue for 2 days & I am able to overcome the error mention by you related to WAD now I am able to execute the WAD application through portal.
Send me your mail Id I will fwd u the configuration steps
Meanwhile chk Trans: SM59 for RFC connection
IN Visual Admin check the JCo RFC Provider is properly configured with backend username.
Chk all the JCo related to BI are working properly either with SSO or User mapping
Chk in Table RSPOR_T_PORTAL the portal URL is proper or not
(transaction code SM30).
2. Enter RSPOR_T_PORTAL as the table.
3. Choose Maintain.
4. Choose New Entries to create a new entry.
5. Maintain the connected portal:
RFC destination: <RFC_DESTINATION>
System name: <SYSTEMALIAS>
Default: <DEFAULT>
Portal URL prefix: <PORTAL_URL_PREFIX>, for example, http://<portalserver><domain>:<port>
Prefix of RM for BW Metadata: <KM_RM_METADATA_PREFIX>, for example, /bw_metadata
KM service URL: <blank>
Referesh the MetaData Service in BI Web Application Designer under settings try to connect you SAPRFC.ini file set enviroment variables for the same.
Swapnil

Error in Web Application Designer

I hope that somebody can help me, we migrated the system BW of version 3.1 to 3.5, but when trying to enter the Web Application Designer throws the following error:
you are logged on to application server that does not support HTTP
thank's

Hi,
Goto transaction SMICM and see if the ICM is active: Do you see a Red or Green light here? If Red, then use menu Administration > ICM > Restart > Yes
Check the services (Shift+F1) and see if HTTP is active.
Hope this helps...

Can't open itunes. i get this message "run time error R6034 an application has made an attempt to load the "C" runtime library incorrectly" ???

I can't open itunes on my PC i get this error message "runtime error R6034 an application has made an attempt to load the "C" runtime library incorrectly" ??? i also get this message "itunes was not installed correctly please reinstall" error 7(windows error 1114) still no luck. ???

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Run Time Errors in BEx Report Designer?....asking for Portal Setup??

In BEx Report Designer, I keep getting short dumps and timeouts when trying to design flashy reports.
I keep getting 2 errors when I time out:
1. 'Query (view) definition cannot be retrieved from Portal.
Please try again or check query and Portal Setup!
Time limit exceeded.
2. xxx Error when reading Query (via BICS)
Please check query and Portal setup!
Time limit exceeded.
We are running ECC 6.0, BI2004s, and SEM 6.0. All in Sandbox/Dev environment.
We are NOT running EP.
I am aware that we have some memory issues, and we're adding 4Gb more on Thursday....can the solution be that simple, or are these errors telling me we need Portals installed? I was under the impression that Portals were NOT required for 2004s, so long as you did not use WAD etc.
Any thoughts??

You would need to install portals(EP) for the report designer to work. When you design your flashy report in designer and try it launch it... it would try to connect to EP to publish it. It bombs when it doesnt find the portal.
On a personal note: Report designer have a long way to go when you think the output would be something like crystal .. NO not yet ... But SAP just got started ... I think they would be there pretty soon. And they promise many enhancements as of SP 13.. so lets all wait.

Edit Chart error in web application designer

Hello,
Whenever I try to edit a chart in de WAD the edit popup window is empty (no edit fields). Does anyone know how to solve this error. BW is running on WAS 6.20 and I am running SAP GUI 6.40 patch 22.
Kind regards,
Raymond Does

Problem solved!
My graphics adapter was set to 128% DPI. This caused 2 errors:
1. The tabs below the template window where "overwritten" by the template window.
2. The "edit chart" popup window remained blank.
After setting my graphics adaper to 96 dpi (default) everything worked fine.

Chart problems in Web-Application Designer

Hello,
I am trying to use CHART in Web Application Designer.
But whatever TYPE I select in that (pie/stack/..),
It shows the report with default chart type..
Then after one /two trials, I have run time error. & Web application Designer crashes. In preview of that chart on template, it shows the chart type I have selected.
What am I missing in my steps. Or is some library missing..
Thanks for you suggestion.
Is very urgent & as I need to show report tomorrow.
Regards,
Santosh

Hi Santosh,
Defining the Width and Height of the Entire Chart
in the Properties
Enter the desired values in fields Width and Height of the window in which you are editing the chart. The entries should be in pixels.
Choose Apply.
The size of the entire chart is changed according to your specifications.
Changing the Size of the Entire Chart with the Mouse
Point to the border of the preview window with the mouse.
The cursor becomes a double arrow.
Click on the border and pull the preview window to the required size.
The size of the entire chart is changed when you let go of the mouse key.
Changing the Size of the Plot Area or the Legend with the Mouse
Click on the element whose size you want to change (plot area or legend).
The element is enclosed in a move handle.
Point to one of the move handles with the mouse.
The cursor becomes a double arrow.
If the cursor does not become a double arrow, you might not have selected the right element, for example the chart area instead of the plot area. In this case click again on the element whose size you want to change.
Click on the move handle and keep the mouse key pressed.
The cursor becomes a cross.
Pull the element to the desired size.
The size of the element is changed when you let go of the mouse key.
Avoid stretching the plot area over the whole area of the chart. The outermost border of the plot area disappears from the visible area in this case and cannot be clicked on again. You cannot change the size of the plot area. If you made the plot area too large by accident, you can undo it with the menu option Undo in the context menu. You can reset the plot area to its original size with Reset, but you will lose all the changes you made to the chart.

It is simple issue D't worry..And one morething is Check the Specific Properties of the Template in Design of the web template.
Thanks
Bhima Chandra Sekhar

Run time error when trying to import bookmarks from firefox

When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.

In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
* The first (gear) button is the Organize button with basic edit menu items for bookmarks
* The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
* The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
Hover each button to see the tooltip or click each of them to see what they do.
* https://support.mozilla.org/kb/how-do-i-use-bookmarks

I cannot access my openoffice documents. I keep getting a run time error message

When I try to open any OpenOffice.org 3.0 file I get a message that says Run time error! This application has asked the Run Time to terminate it in an unusual way.

Please try updating to version 19.0
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Error run web application designer 3.X

hello forum,
When I run the tool designer of the web application version 3.x.
jumps the following error:
Run-time error "75"
Path / file access error.
I have installed the patch:
gui710_7-10002995.exe: Patch Level 7 for SAP Logon.
bi710sp05_500-10004472.exe: BI Add-on 7.x, Support Package 5, Patch Level 5.
And he still does not work, you know if I need to install any more patch or perform some sort of setup?
A greeting and thanks.

Hi,
You are talking in the query designer?
But that will only appear the result (with value) red or green or yellow, correct?
The idea is not to show the value, only the light.
Example:
I have the following:
Client|Value|
11    | 10eur
12    | 12eur
13    | -2eur|
The idea is to have the following:
Client|Alert|
11    | Green
12    | Green
13    | Red
Green to positive, red to negative, but only a light, no values displayed.
Thanks!
Edited by: Pedro Taveira on Nov 3, 2011 2:03 PM

Web Application Designer -Unknown Error Occured during Portal Communication

we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAM

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

Run time error when loding the WEB clint

Dear
All
I am in sap ides 4.0 I am trying to login the web Clint thru the BSP application in the se80 t code I got in to that code select the BSP application after that cic_ic and F8.
New internet explore opened and asked for user id password after that. The page is loding after that no action but I refresh the page it is saying that ending the section.
I find that i am getting two types of run time errors when page loding i find this thru st22 list of run time errors.
that are 20.10.2008
1.09:26:15     gopinath     SAPUSER     800     C     SYNTAX_ERROR               CRM_MKTTG_PROC_TG_FEXP_BATCH     1
2.18.10.2008     14:05:55     gopinath          000     C     DBIF_RSQL_INVALID_REQUEST               SAPMSYST     1
and i check in event viewer also in that it is showing that.
SAP-Basis System: Transaction Canceled 00                  671 ( SYNTAX_ERROR 20081020092615gopinath                        SAPUSER     8001        )
with Regards,
Prakesh.

Hi
I would suggest you to create a OSS request using service.sap.com and ask SAP to help on this
Regards
Madhan

Run Time Error while Transferring data to Application server

Hello Abaper's,
I have generated a XML data using the FM : " SAP_CONVERT_TO_XML_FORMAT ".
While transferring the data to a File on Application Server using the statement
DATA : wa_xmltab TYPE truxs_xml_line,
 it_xmltab TYPE truxs_xml_table.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
 TRANSFER wa_xmltab TO FNAME. <<<<<<<<<<<<<< Getting Error here
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
The Run Time Error i am Facing is
Short text
 The current statement is only defined for character-type data objects.
Error analysis
 For the statement
 "TRANSFER f TO ..."
 only character-type data objects are supported at the argument position
 "f".
 In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
 current program is a Unicode program. In the Unicode context, the type
 'X' or structures containing not only character-type components are
 regarded as non-character-type.
Regards
jv

Hello Volker Binder ,
Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
Actual No. of Records in Internal table :
matnr matkl meins
0-BUY1 012 PC
0-BUY2 012 PC
1 EA
2 012 L
3 01 EA
12 EA
23 001 ST
24 015` EA
28 010 EA
29 015` AU
XML Format for the above 10 fields is :
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
This 4th record data in XML is also incomplete..
The above XML format is generated only for 4 records out of 10 Records.
Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
Regards
Jv

Run time error in Web Application design

Similar Messages

Maybe you are looking for