Run time error message

why is my program shutting down when I get this message.
I have been trying for months to get an answer

You need to define your RETURN1 structure like this:
Data: RETURN1 type BAPIRET1.
REgards,
Naimesh Patel

Similar Messages

  • Run time error message when I try to open itunes?

    I cannot open itunes afte using it for 3 years.  I receive a run time error message. 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Iam getting run time error message when i try to open dream weaver cs4

    iam getting run time error message when i try to open dream weaver cs4

    exact message am getting when i try to open dreamweaver cs4- this application has requested the run time to terminate in it in an unusual  way . please contact the applications support team for more information.

  • Migration from Access97 - Run time error message

    When I am trying to migrate from Access 97 to Oracle 8i Using Migration Work Bench I am getting the following error message.
    Microsoft Visual C++ Run Time Library (Message Title)
    Runtime Error
    Program: C:\ProgramFiles\Oracle\jre\1.1.7\JREW.EXE
    Abnormal Program Termination
    OK (button to click.)
    Please help me with your valuable input.
    null

    And is a boolean operator. Try it like this instead:
    Select Case ComboBox1.Text
    Case "Banks"
    Sector = "Bank"
    Index = -0.086
    Case "Mobile Telecommunications"
    Sector = "Mobile Telecommunications"
    Index = -0.024
    Case "Real Estate Investment Trusts"
    Sector = "Real Estate Investment Trusts"
    Index = 0.132
    End Select
    Still lost in code, just at a little higher level.

  • I cannot access my openoffice documents. I keep getting a run time error message

    When I try to open any OpenOffice.org 3.0 file I get a message that says Run time error! This application has asked the Run Time to terminate it in an unusual way.

    Please try updating to version 19.0
    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Run TIme Error Message- Array Out of Bounds Exception

    Good evening all,
    I seem to have a run time error with the below segment of code. I've changed the (args[0]) a variety of ways but still get the same message.
    I have a few questions regarding my methodology. First, am I headed down the right path (no spoonfeeding allowed please! I need to grasp and learn this myself). Second, would it be something causing error that is on another line and I'm not seeing it. Third, should I have added the entire class file?
    public static void main(String [] args) throws IOException
       Inventory store = new Inventory ( 15);  // Sets store inventory
       Scanner inFile = new Scanner(new File(args [0])); // _Line 27 in the program_
       PrintWriter outfile = new PrintWriter(args [1]); 
       String temp; .
       double price; 
       int quantity; .
       inFile.next();
       int x = 0; Run time error received:
    java.lang.ArrayIndexOutOfBoundsException: 0
         at StoreBusiness.main(StoreBusiness.java:27)
    Thank you in advance everyone.

    WarriorGeek wrote:
    Thanks Flounder,
    I feel pretty dumb after posting my answer.
    I read the arrays tutorial and understand all that's described there but with what I've learned you have to start your array out at zero like I did. Should I use the variable name that I gave it in lieu of zero?No. The point is that since you didn't provide any arguments when you started your program, there is no arr[0] or arr[anything else]. It doesn't matter if you put an int literal between the brackets or a variable or a method that returns int. You can't access elements that don't exist.
    So instead of java MyClass you need to do java MyClass something The "something" becomes args[0]. If you're using an IDE instead of the command line, there will be a place to configure what arguments you want to pass when you run your program.

  • WAD run time error message

    Hi,
    I have problem opening template in WAD on my computer.  I will get the below error message every time i am trying to open a template.
    My WAD version is Release 2004s, Patch 700, Revision 172.
    Does anyone encounter the same problem before?
    [http://img2.freeimagehosting.net/uploads/5758023e39.jpg]

    >
    Claire Tan wrote:
    > Hi,
    >
    > Thanks for your help.
    >
    > I managed to get my WAD working after i installed 7 patches from SAP market place but i still have problem in WAD.
    >
    > When i click on a dropdown box in my WAD template, the properties panel on the left didn't refresh by itself.
    >
    > Has anyone encounter this problem before?
    >
    > I am currently on support package 17, patch 1, revision 452 for my WAD.
    >
    >
    > Thanks.
    Hi,
    Thanks for your prompt reply.
    I closed WAD and get it restarted twice and the problem above is solved.
    Here it comes another problem, when you click on execute button, it will pop up a page in Internet Explorer.
    I  managed to log into the portal but later got this javascript error:
    Line: 98
    Char: 7
    Error: Access is denied.
    Code:0
    URL: https://blahblahblah....my template name
    Do you have any idea what went wrong this time?
    I am running WAD version - BI AddOn 7.x(based on 6.40), support package 17, patch 1, revision 452
    My internet explorer version - 6.0.2900.2180.xpsp_sp2_qfe.070227-2300
    Thanks

  • LabVIEW 8.2 -- "unable to locate LabView run-time" error message

    I am trying to run a LabVIEW version 8 exe file and keep getting the
    "Unable to locate" error. I downloaded LabVIEW_8.2_Runtime_Engine.exe
    from the NI website and installed the entire contents of the
    distribution. After getting the error, I have tried uninstalling and
    reinstalling several times, with the same result.
    Is there some way I can troubleshoot this? Is there a configuration
    file or a registry entry I can check to see where LabVIEW is looking
    for the run-time?

    Michael,
    As Dennis said you need to make sure the version of the Runtime Engine matches the version of LabVIEW the executable was created with.
    You can find different versions of the Runtime Engine on our webpage here.
    Regards,
    Simon H
    Applications Engineer
    National Instruments

  • I am getting a run time error message when I am trying to reinstall itunes and I'm not sure how to fix it. Can someone tell me what I need to do to get itunes back? Thanks!

    I'm not sure how or why this is happening and it has just started...I tried to update and then it would not allow me to open the file at all giving me a runtime error message and multiple windows (because of the help feature). It has been successfully reinstalled but I'm still getting the error message...what do I do?

    Hello, MommaLloyd24. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Custom run time error message into C# UI

    Hi,
    I'm trying to get the error message for the last step into my C# UI (using TestStand3.5).
    I've tryed the GetRunTimeErrorMessage in the UIMsg_Trace message event, but it doesn't work.
    Probably I should use the PostStepRunTimeError callback instead? Is there a sample code available in C# using it?  

    I'm getting the error code and the message, se below, but I also want to get the location info as in the standard TS error popup.
    The boolean Occurred parameter seems to be false even if I get an error. Is it reset to false or something? 
    int frameID = 0;
    errorCode = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValNumber("Parameters.ErrorLoad.Code", 0);
    details = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValString("Parameters.ErrorLoad.Msg", 0);
    location = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValBoolean("Parameters.ErrorLoad.Occurred", 0); 

  • Run time error message - Conversion from string "Mobile Telecommunications" to type 'Boolean' is not valid.

    I get a error message when I select an element in the combo box, please review my variables:
     Public Sector As String
        Public Index As Decimal
    ...and code
     Select Case ComboBox1.Text
                Case "Banks"
                    Sector = "Bank" And Index = -0.086
                Case "Mobile Telecommunications"
                    Sector = "Mobile Telecommunications" And Index = -0.024
                Case "Real Estate Investment Trusts"
                    Sector = "Real Estate Investment Trusts" And Index = 0.132
            End Select

    And is a boolean operator. Try it like this instead:
    Select Case ComboBox1.Text
    Case "Banks"
    Sector = "Bank"
    Index = -0.086
    Case "Mobile Telecommunications"
    Sector = "Mobile Telecommunications"
    Index = -0.024
    Case "Real Estate Investment Trusts"
    Sector = "Real Estate Investment Trusts"
    Index = 0.132
    End Select
    Still lost in code, just at a little higher level.

  • Unable to open attachments in my aol email account, i get a run time error. I am able to open them in ie. Also unable to open up a downloaded doc in word.

    Since updating to firefox 15. whatever and now 16.0.1, i have been unable to open up any email attachments in my aol email account. I am able to view them via internet explorer. Initially the attachment will open (i can see it) but then a message of "run time error" comes up and when I close that window, the document goes blank. Also, today I clicked on a link via an aol news story and the same thing happened. It went to my firefox downloads, I was able to see part of the document and then that window with "run time error" message in it popped up. Help!!!!

    This is a tip I got from ehow.com:
    "While less common in Firefox, runtime errors can still occur on that browser. To prevent it from happening again, merely uninstall and reinstall Firefox on your computer."

  • Run time error while closing the CRM Order using BAPI

    Hi Experts,
    Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
    I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
    For the custom program we will give input as the order number and execute it, this will close the order.
    Here close the order means assigning it to Close status as well assign the reason code.
    We have created some reason codes for closed status.
    So when the program is run the Order moves from resolved status to closed status along with reason code.
    But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
    Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
    Please find my code which have used in the custom program
    Closing the resolved SOs in the system
        CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
            EXPORTING
              objnr                     = iv_guid
              user_status          = lc_status_closed
           EXCEPTIONS
             object_not_found          = 1
             status_inconsistent       = 2
             status_not_allowed       = 3
             OTHERS                        = 4.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining status'.
        ENDIF.
    Set reason code
    build lt_subject
        ls_subject-ref_guid = iv_guid.
        ls_subject-katalogart = 'A2'.
        ls_subject-codegruppe = 'ZR000003'.
        ls_subject-code       = 'ZR33'.                      " Reason code
        ls_subject-mode       = 'A'.
        APPEND ls_subject TO lt_subject.
    build lt_ossset
        ls_osset-ref_guid        = iv_guid.
        ls_osset-subject_profile = 'ZREASON03'.
        ls_osset-profile_type    = 'G'.
        ls_osset-subject         = lt_subject.
        APPEND ls_osset TO lt_osset.
    build lt_service_os
        ls_service_os-ref_guid  = iv_guid.
        ls_service_os-ref_kind  = 'A'.
        ls_service_os-osset     = lt_osset.
        APPEND ls_service_os TO lt_service_os.
    build lt_input_fields
        REFRESH: lt_input_fields, lt_field_names.
        CLEAR  : ls_input_fields, ls_field_names.
        ls_field_names-fieldname    = 'CODE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'CODEGRUPPE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'KATALOGART'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'SERVICE_PROFILE'.
        APPEND ls_field_names TO lt_field_names.
        ls_input_fields-ref_guid    = iv_guid.
        ls_input_fields-ref_kind    = 'A'.
        ls_input_fields-objectname  = 'SERVICE_OS'.
        ls_input_fields-field_names = lt_field_names.
        APPEND ls_input_fields TO lt_input_fields.
         CALL FUNCTION 'CRM_ORDER_MAINTAIN'
          EXPORTING
            it_service_os     = lt_service_os
          CHANGING
            ct_input_fields   = lt_input_fields
          EXCEPTIONS
            error_occurred    = 1
            document_locked   = 2
            no_change_allowed = 3
            no_authority      = 4
            OTHERS            = 5.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining reason'.
        ENDIF.
        CALL FUNCTION 'CRM_ORDER_SAVE'
          EXPORTING
            it_objects_to_save   = lt_header_guid
            iv_update_task_local = lv_update_task_local
          IMPORTING
            et_saved_objects     = lt_saved_objects
          EXCEPTIONS
            document_not_saved   = 1
            OTHERS               = 2.
        IF sy-subrc <> 0.
          WRITE : 'Error at saving'.
        ELSE.
          WRITE : 'Successfully Closed'.
          COMMIT WORK AND WAIT.
        ENDIF.
    Run time error is coming at COMMIT WORK AND WAIT statement.
    Please let me know any corrections are required in the above program.
    When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
    For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
    There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
    Kindly provide your feedback.

    Hi Dinakar,
    You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
    Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
    Regards - Pawan

  • Asset master creation (run time error)

    Dear all
    I am facing problem with  asset accounting at that time creation of asset master getting to  run time error message
    Error message: GETWA_NOT_ASSIGNED
    Fields symbol not yet been assigned(segment 32770)
    Thanks & Regards
    suresh
    Edited by: prasad y on Jul 5, 2011 3:23 PM

    Dear:
                  Please check notes, they have to be implemented in the system
                   992846
                   988238
                   Regards

  • Run Time Error when attempting to use pse 10 editor

    While using the editor in PSE 10, it suddenly stopped working, giving me a "run time error" message. I have created a new user account, created restore points on my PC, attempted to change the preference files, all to no avail. The software came installed on my PC, so I'm unable to do an uninstall and reinstall as I don't have the installation CD. The PC manufacturer and Adobe support have been unable to help (neither providing me with a product key). Can someone help me fix the "run time error"?  Until it's fixed, the product is unusable.

    Can you share the exact error message or probably a screenshot which might help us reviewing it and suggest you any solution.
    Thanks,
    Garry

Maybe you are looking for