Run time error(Time out) in KEI1 transaction code

Hi All,
When i go to KEI1 transaction code -> select A1 structure -> double clicking on Assignment Lines -> selecting Input price variance
-> double clicking on Source is resulting in timeour error.
Please help me in resolving the issue in ECC6.0 EHP 4.
Thanks in Advance,
Durga Naresh

Hi,
Come out of the Transcation code and rerun it , Run time Error would be if there there is any cost element or cost element group variant assigned in source. check weather the cost element and CE Group is created or not.bez I think you have assigned these CE or CEG in other server and transported it. so check if the respective CE or CE Group created or not .if not create them.
Hope the above suggections helps you in clearning tht Error.
Thanks
Goutam

Similar Messages

Portal run time error while accessing R/3 transaction code

Hi all,
We have configured R/3 system and BW system to the Portal.
In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
Can any body have some ideas about this , pts will be assigned,
Thanks ..

Have you collected the error log details which looks similar to the below one??
"The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

Run-time error '7': Out of memory - Cisco Clean Access problem

Hi all,
I hope this question is in the appropriate place. I'm trying to use my company's vpn service. Here's how the process should work:
1) Log on with username/password using Cisco AnyConnect VPN Client
2) Log-in to the portal. During this step the Cisco Clean Access Agent is supposed to automatically log-in. However I get the following error:
Run-time error '7':
Out of memory
My company's network services didn't seem to be much of a help so I was hoping one of you would have a good suggestion(s).
Please keep in mind that I'm not great with computers. I know how to use them and all that but I'm not familiar with the inner-workings at all (registry editing etc.)
Thanks in advance!
-Bill

I should add that the version of CCA is 4.1.10

At the time of doing subsequient credit in Transaction code MIRO

Hi SAPians
i have a querry
At the time of doing subsequient credit in Transaction code MIRO what are the accounting entries generated and especially i would like to know what transaction keys will come into the picture.

Hi,
For subsequent Credit, Vendor account and the Material Account will be triggered. If the Purchase Order is for Consumable Materials, then instead of the Material Account, the G/L specified in the Purchase Order will be triggered
Vendor account will be Debited and the Material / Consumption account will be credited. In case of a Material Purchase Order, and there is no stock exists for the Material then it will hit Price Difference account
For Material Account, G/L related to BSX Tr Key will be triggered. For consumption posting anyway G/L derivation is from the Purchase Order only.
Hope it is helpful
Regards
Ramakrishna Mangena

How i can find out number of transaction code created in last 6 month

Dear Friends,
How i can find out number of transaction code created in last 6 month and last used date for each transaction code.
System - ECC 5.0
Plz help.
Thanks,
Regards,
Sachin

Hi,
As per your query you can find out the list of t-code not to use in last time details in suim t-code.
Anil

Getting run time error when executing stanard SAP transaction

Hi experts,
I am trying to run the standard SAP report transaction S_ALR_87013557. but it is giving the run time error "LOAD_PROGRAM_NOT_FOUND". i also check the program name that appears in the short dump with SE38. it gives the message that no program exist.
but when i try to run other S_ALR_ trasactions, they are running correctly.
So can just help me in this regards.

Check if this program GPA8PD2X83M8PML7SBUU3COEFIK exist in your system.
if yes then see which transaction it is attached.
if that transaction is executing properly, then functional person can tell if that's the report they are looking for.
if no u can execute this prog from se38 & check. if that works, then you can create z transaction & attach that program.
This will be workaround, ideally you should raise OSS ticket. SAP may release new Note .

Run time error in MIGO after maintaining tax code

Hello Experts,
I had configured the new tax code ,which is working fine for the PO document ZLOC domestic and the account category Z.
While doing the MIGO for purchase document type ZGEN general purchase , I am getting run time error:
"Division by 0 (type P) in program "SAPLJ1IEX".
When I debugged the code i found that inside FM: 'J_1IEX_DEFAULT_EXCISE_DUTY'
one another FM is being called: 'J_1I6_UNIT_CONVERSION' which is returning the value "ls_ekpo-menge" as 0(Zero).
later in the code when "ls_ekpo-menge" used in calculation then divide by 0 runtime error is coming.
Please suggest what need to be done.
Is there anything related to tax code? How should I correct it?

Hi,
There is not value in that field for PO quantity / Value it is missing while doing MIGO. Check whether you have maintained values for all required fields.
Kiran

I want to load 500 data points in binary, using Power Basic for DOS. IBRDI will not compile in Power Basic. ILRDI will compile, but I can not get it to work. I get a run time error"subscript out of range"

According to NI manual for DOS IL functions return the value of ibsta, which is an integer. So what is the problem, or is Power Basic 3.1 a special case. If so what is the solution

The subscript error I get does obviously relate to the array, but I know in advance how much data will be transfered, 500 data points of a trace and I have DIM the array just prior to the transfer code, in the same subroutine. Also I have attemped to make the transfer a for next loop and it I get the same error at the start of the loop? The has to be another cause of this problem.

Measure time for a program in SE30 transaction code

where should i get the help files and i want to know how should we measure the time for the two different programs and upto how much time the program will take if the program is exactly right means with no errors and in the graph it is showing when i'm analyzing the performance of a program i.e abap with 77% in red, database with 10% in green, and system with 20% in green what does it represent. for a exactly correct program how much percentage should needed and it should be in which color?

Hi,
for a good program,
the database and system time values should be green always.
abap program can be red also not a problem.
but if database is in red colour, (after it crosses 50%), then it means that it gives much load in database server and you should change your code performance.
Regards,
Sakthi Sri.

Getting Error Message on the MC84 transaction code MG144

The field is defined as a required field; it does not contain an entry ... Message no. MG144 ...
We are unable to get past the initial screen of the t-c mc84. getting the above error. The product group's material type is PROD. The only reqd entry in the screen is the base unit of measure which I am entering as EA (eaches)
We have included the views Basic Data1 & MRP1 for this material type.
I learnt that for mc84 to be successfull, no other views for the material/ prod-group shall contain any required entries. So I figured out some of the entries such as 'profit centre' and made it optional. However, I was not able to make the MRP-type as optional. someone suggested to remove the MRP view to eliminate the error.
Nothing is working, how to make the mc84 t-code work?

Dear Raghu,
Check these links,
how to create product group?error?
Product group error
If this does helps you means please revert back.
Regards
Mangalraj.S

Error while posting material using transaction code MB1C

Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHER

Dear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER.

Error release purchase order using transaction code me29n

i have warning error this purchasing document number cannot be released.
while i enter me29n t code.why?
then how to release purchase order using me29n t code?
can anyone answer this two questions.

hi
i have warning error this purchasing document number cannot be released. while i enter me29n t code.why?
is the release strategy is triggred for the po ?? check thisin P order in me23n ,in header level check release strategy tab ,
then how to release purchase order using me29n t code? can anyone answer this two questions.
just go to me29n >release strategy tab here just click on the release button in front of the release code

Run TIme Error Message- Array Out of Bounds Exception

Good evening all,
I seem to have a run time error with the below segment of code. I've changed the (args[0]) a variety of ways but still get the same message.
I have a few questions regarding my methodology. First, am I headed down the right path (no spoonfeeding allowed please! I need to grasp and learn this myself). Second, would it be something causing error that is on another line and I'm not seeing it. Third, should I have added the entire class file?
public static void main(String [] args) throws IOException
   Inventory store = new Inventory ( 15); // Sets store inventory
   Scanner inFile = new Scanner(new File(args [0])); // _Line 27 in the program_
   PrintWriter outfile = new PrintWriter(args [1]);
   String temp; .
   double price;
   int quantity; .
   inFile.next();
   int x = 0; Run time error received:
java.lang.ArrayIndexOutOfBoundsException: 0
     at StoreBusiness.main(StoreBusiness.java:27)
Thank you in advance everyone.

WarriorGeek wrote:
Thanks Flounder,
I feel pretty dumb after posting my answer.
I read the arrays tutorial and understand all that's described there but with what I've learned you have to start your array out at zero like I did. Should I use the variable name that I gave it in lieu of zero?No. The point is that since you didn't provide any arguments when you started your program, there is no arr[0] or arr[anything else]. It doesn't matter if you put an int literal between the brackets or a variable or a method that returns int. You can't access elements that don't exist.
So instead of java MyClass you need to do java MyClass something The "something" becomes args[0]. If you're using an IDE instead of the command line, there will be a place to configure what arguments you want to pass when you run your program.

Run Time Error - Timeout (QA32)

Hi Gurus,
Iam getting Run time error when i execute QA32 transaction. it is throwing a short dump while saving the document after entering the details in Usage decision.
Please let me know how to go about it.
thanking you all advance for your kind help.
rgds

Hi Nagesh,
Thanks for your answer, can please let me know how to configure this. my client is using UDcode as 'UD01' and 001 Accepted. and when he is trying to save this. the system is saying performing stock posting and after sometime throws the runtime error.
can you please give me step by step configuration for the above. i will be very much thankful to you.
Rgds

Run time error on Product view

Hi Guys,
I got a run time error when I open the transaction to view Product /SAPAPO/ MAT1.
The error message says "DBIF_RSQL_TABLE_UNKNOWN" with the description "A table is unknown or does not exist". Whereas, when I verified in the database, the Table exists in the system.
What could be the issue can anyone throw some light on this?
Regards
aarvey

Hi Suresh,
I checked the database connectivity.. and I am getting the communication back. So there is no problem with RFC connectivity.
I dont know if it helps, I am getting another problem and as u mentioned abt the planning version, may be it helps...
Actually the model is active...but when I go to the product view in IPP, I am getting the error "Invalid planning version"
Regards,
aarvey

Run time error(Time out) in KEI1 transaction code

Similar Messages

Maybe you are looking for