Run time error when loding the WEB clint
Dear
All
I am in sap ides 4.0 I am trying to login the web Clint thru the BSP application in the se80 t code I got in to that code select the BSP application after that cic_ic and F8.
New internet explore opened and asked for user id password after that. The page is loding after that no action but I refresh the page it is saying that ending the section.
I find that i am getting two types of run time errors when page loding i find this thru st22 list of run time errors.
that are 20.10.2008
1.09:26:15 gopinath SAPUSER 800 C SYNTAX_ERROR CRM_MKTTG_PROC_TG_FEXP_BATCH 1
2.18.10.2008 14:05:55 gopinath 000 C DBIF_RSQL_INVALID_REQUEST SAPMSYST 1
and i check in event viewer also in that it is showing that.
SAP-Basis System: Transaction Canceled 00 671 ( SYNTAX_ERROR 20081020092615gopinath SAPUSER 8001 )
with Regards,
Prakesh.
Hi
I would suggest you to create a OSS request using service.sap.com and ask SAP to help on this
Regards
Madhan
Similar Messages
-
ABAP Run time error when display the Customs Export declarations
Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar type /sapsll/corpar_t
lt_corpar_ht type /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
"/SAPSLL/CUHD_LOAD_SELECTION".
The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
In the source code you have the termination point in line 144
of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep MaddiHi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors ITAB_DUPLICATE_KEY
ABAP Program /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep -
Category ABAP Programming Error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
ABAP Program ZMM_MIGO_GOODS_ISSUE
Application Component Not assigned
Date and Time 26.05.2014 14:28:30
Short Text
"C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception has occurred which is explained in more detail below. The
exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
in procedure
"%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated thisHI CHIRUI,
I have changed and tried but still i a getting the same thing..
otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
DATA : BEGIN OF IT_DATA OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Material Slip No
DEL_NOTE(16), " delivery note
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
BWART TYPE RM07M-BWARTWA, " Movement Type
SOBKZ(1), " Special Stock
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
PS_POSID TYPE PS_POSID, " WBS Element
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
SERNR TYPE RIPW0-SERNR, " Serial Number
END OF IT_DATA,
BEGIN OF IT_HEAD OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Reference document number
"HEADER_TXT(25), " Header Text
BWART TYPE RM07M-BWARTWA, " Movement Type
END OF IT_HEAD,
BEGIN OF IT_ITEM OCCURS 0,
ID(10),
"ID1(10),
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
VAL_TYPE TYPE BWTAR_D,
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
CHARG TYPE MSEG-CHARG, " Batch
BWTAR TYPE BWTAR_D,
PS_POSID TYPE PS_POSID, " WBS Element
ERFME TYPE MSEG-ERFME, " Unit
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
CUSTOMER TYPE EKUNN, " Account Number of Customer
SERNR TYPE RIPW0-SERNR, " Serial Number
AMOUNT_LC TYPE BAPI_EXBWR,
SOBKZ(1),
END OF IT_ITEM,
HEADER LIKE BAPI2017_GM_HEAD_01,
CODE LIKE BAPI2017_GM_CODE,
ITEMS LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
SERIAL LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
RETURN LIKE BAPI2017_GM_HEAD_RET,
RET LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
TESTRUN LIKE BAPI2017_GM_GEN-TESTRUN,
IT_TAB TYPE FILETABLE,
GD_SUBRC TYPE I,
L_FILE TYPE RLGRAP-FILENAME,
IT_RAW TYPE TRUXS_T_TEXT_DATA,
COUNT(2) TYPE N,
TEXT_C(30).
DATA: DATA LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
* p_test AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
CHANGING
FILE_TABLE = IT_TAB
RC = GD_SUBRC.
READ TABLE IT_TAB INTO P_FILE INDEX 1.
START-OF-SELECTION.
PERFORM GET_EXCEL_DATA.
PERFORM GET_HEADER_ITEM.
PERFORM UPDATE_DATA.
*& Form GET_EXCEL_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_EXCEL_DATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = P_FILE
IMPORTING
OUTPUT = L_FILE.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_LINE_HEADER = 'X'
I_TAB_RAW_DATA = IT_RAW
I_FILENAME = L_FILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_EXCEL_DATA
*& Form GET_HEADER_ITEM
* text
* --> p1 text
* <-- p2 text
FORM GET_HEADER_ITEM .
DATA : FLAG(1).
LOOP AT IT_DATA.
CLEAR FLAG.
IF IT_DATA-ID IS NOT INITIAL.
AT NEW ID.
FLAG = 'X'.
ENDAT.
ENDIF.
IF FLAG = 'X'.
MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
APPEND IT_HEAD.
ENDIF.
MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
APPEND IT_ITEM.
ENDLOOP.
DATA[] = IT_ITEM[].
IT_TEMP[] = IT_ITEM[].
IT_TEMP1[] = IT_ITEM[].
ENDFORM. " GET_HEADER_ITEM
*& Form UPDATE_DATA
* text
* --> p1 text
* <-- p2 text
FORM UPDATE_DATA .
DATA : COUNT1(10),
L_QTY TYPE I,
DAT(10).
CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
LOOP AT IT_HEAD.
ON CHANGE OF IT_HEAD-ID.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BUDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-PSTNG_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BLDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-DOC_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE : '2' TO HEADER-VER_GR_GI_SLIP,
'X' TO HEADER-VER_GR_GI_SLIPX.
* IF r1 EQ 'X'.
MOVE '05' TO CODE-GM_CODE.
HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
"HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
* ELSEIF r2 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ELSEIF r3 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ENDIF.
* IF p_test = 'X'.
* MOVE 'X' TO testrun.
* ENDIF.
ENDON.
IT_ITEM1[] = IT_ITEM[].
*delete it_item[] where werks = '' and id = it_head-id.
DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
* ON CHANGE OF it_item-id1.
COUNT1 = COUNT1 + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = IT_ITEM-MATNR
IMPORTING
OUTPUT = ITEMS-MATERIAL.
MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
IT_ITEM-LGORT TO ITEMS-STGE_LOC,
* it_item-lgort1 TO items-move_stloc,
IT_ITEM-CHARG TO ITEMS-BATCH,
* IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
'FRESH' TO ITEMS-VAL_TYPE,
IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
* it_item-erfme TO items-entry_uom,
* it_item-sgtxt TO items-item_text,
* it_item-exbwr TO items-amount_lc,
IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
"IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
IT_ITEM-ERFMG TO L_QTY,
IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
IT_ITEM-ORDER TO ITEMS-ORDERID.
* items-SPEC_MVMT = 'R'.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-WBS_ELEM
IMPORTING
OUTPUT = ITEMS-WBS_ELEM.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-VAL_WBS_ELEM
IMPORTING
OUTPUT = ITEMS-VAL_WBS_ELEM.
* CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
* EXPORTING
* input = it_item-lifnr
* IMPORTING
* output = items-vendor.
APPEND ITEMS.
* ENDON.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
DATA: MAT_ITM TYPE MBLPO,
SERNP TYPE SERAIL.
MAT_ITM = '0001'.
LOOP AT IT_TEMP.
SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
IF SERNP IS NOT INITIAL.
LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
* MOVE : it_item1-id TO serial-matdoc_itm,
* MOVE : mat_itm TO serial-matdoc_itm,
SERIAL-MATDOC_ITM = MAT_ITM .
SERIAL-SERIALNO = IT_TEMP1-SERNR.
APPEND SERIAL.
CLEAR IT_ITEM1.
ENDLOOP.
MAT_ITM = MAT_ITM + 1.
ENDIF.
CLEAR IT_TEMP.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = HEADER
GOODSMVT_CODE = CODE
TESTRUN = TESTRUN
* GOODSMVT_REF_EWM =
IMPORTING
GOODSMVT_HEADRET = RETURN
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
TABLES
GOODSMVT_ITEM = ITEMS
GOODSMVT_SERIALNUMBER = SERIAL
RETURN = RET
* GOODSMVT_SERV_PART_DATA =
* EXTENSIONIN =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
* IMPORTING
* RETURN =
IF NOT RETURN IS INITIAL.
WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
ELSE.
LOOP AT RET.
WRITE : RET-TYPE, RET-MESSAGE.
* log-index = sy-index.
* log-matnr = header-material.
* log-message = ret1-message.
* APPEND log.
ENDLOOP.
ENDIF.
REFRESH : ITEMS,RET.
CLEAR : HEADER,RETURN.
CLEAR: TESTRUN ,
RETURN,
ITEMS[],
SERIAL[],
RET[],
HEADER,
IT_TEMP[] ,
IT_TEMP1[].
IT_TEMP[] = DATA[].
IT_TEMP1[] = DATA[].
ENDLOOP.
ENDFORM. " UPDATE_DATA
Regards,
Suresh bheema -
Run time error when using search
I get a run time error when using the search in iTunes store. Running current iTunes version.
Duplicate post -- Client ADI display A runtime error in Office 2010
-
Run time error when set filter on the request id in the output query.
Hi all,
I am getting a run time error when I select the request id and set filter on that and when i am selecting all the request id it contains around 2lacs values in that If i cliked ok on that .
It popped up a msg like this
" Run time error 61706
Insufficient memory to perform operation "User was educated not to select the entire data in the filter
-
I get aq run time error when trying to load the latest version of iTunes. Help.
I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?
Hi jalbany,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Run Time Error when trying to get into the organizer
Does anyone know when I keep getting a run time error when I'm trying to go into the organizer and how I get it to go away?
The answer is that maybe someone does know ... but unless you give us the basic details of what you are doing, we probably can't help.
So ...
What version of PSE?
What operating system?
What is the EXACT word-for-word verbatim error you are seeing?
Does any part of PSE (like the "splash" screen) pop up before this error? If so, describe it or give us a screen capture.
Please provide all requested information. -
Run time error when we click "Leave overview " in ESS - pl help
Hi Gurus ,
We are getting run time error when we
click the 'Leave Overview' in
ESS.
when emloyee applies for leave he may
need to wait for aproval during
that time he cannot access the 'leave
overview' screen he will be
facing run time error .
because of this run time error system
performance become very slow .
please help me .i will give points for valid answers .
:-Suneetha reddyHi ,
I am soory for late reply ,
I changed the runtime parameter to 1200 and monitaring the system .
Now there is no Run time error but still Leave overview is taking time .
Please help
Thanks,
Sunitha -
Run Time Error When opening PDF File on Computer
I am getting a run time error when I try to open up PDF's on my computer. The error message reads, "The application has requested the runtime to terminate in an unusual way. When I click ok the error box I get a message that says adobe reader has stopped working and the program has been closed. FYI I am using the latest version of adobe reader
Operating system is Windows Vista Home Premium..
Version of Adobe Reader is 10.1.13.
Any thoughts on what the issue is? -
ABAP Run time Error whle executing the Balance sheet report in FGI0
Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors MESSAGE_TYPE_X
Date and Time 06/12/2009 15:17:17
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
RAISE RKD_CONDITION_READ (internal error)
Long text of error message:
Diagnosis
The program was terminated because a situation occurred which
should not have arisen.
Procedure
Analyze the situation and contact SAP.
Technical information about the message:
Message class....... "KH"
Number.............. 299
Variable 1.......... "RKD_CONDITION_READ"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLKYPR
Include LKYPRU31
Row 36
Module type (FUNCTION)
Module Name RKD_CONDITION_READ
Thanks
SupriyaHello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi -
XLRepoter - Run Time Error When running xlreporter report in MS2003 Execel
Hi,
I got this error when trying to XLReporter report in MS2003 Execel : Microsoft Visual C++ Runtime Library. Runtime Error! Program: C:\Program Files\SAP\SAP Business One\SAP Business One.exe. Abnormal program termination. Then the process was terminate.
Regards,
VivianPlease check this thread to have a reference:
XLR run-time error when upgrading from 2007A PL 39 to PL 42
Thanks,
Gordon -
Have Elements 11 and I get a Run Time Error when going into editor?
I have Elements 11 and I am getting a run time error when I select editor. It worked 2 weeks ago and now I get the message. I use Windows 7 and it nothing has changed in the past two weeks that I know of. The error is Microsoft Visual C ++ runtime Library
Windows was installed in 2013, so it is whatever that dumb version was with
no 'off'...
I have Photoshop Elements 10.0
I have no idea what an optimized computer means.
When I say 'either editor' I mean I can't use the Full or Quick editor,
they both produce the same message stream.
As follows:
Box pops up that is Microsoft Visual C ++ Runtime Library with the
message:
Runtime Error
Program : C:\Program files
THis application has requested the Runtime to terminate it is an
unusual way....
PLease contact the application support team for more information
If I click the OK button then I get an Adobe Photoshop Elements 10 box that
pops up which says
"Elements 10 has stopped working"
I have no problem downloading images into the program or renaming files or
pulling images back out I just can't edit.
Hope that helps.
Leslie
On Tue, Mar 31, 2015 at 11:27 AM, A.T. Romano <[email protected]> -
Run time error when loading external dimensions in Dev Studio
Hi,
I'm getting a run-time error when I try to load externally managed dimensions in Dev Studio using "Discover" button. The dimensions appear in the state folder so they got loaded fine but not sure why they are not being loaded into dev studio.Your question relates to the Endeca Commerce product(s), and would be better asked in this forum: Technical Questions .
-
Algebra CD keeps displaying "Script run-time error" when I try to open it
I have a CD that came with my Algebra book (I bought it used) for Technical School and it keeps displaying Scrip run-time error when I try to open it. I have updated Quick-time player, just in case that was the problem.
b noir wrote:
Is CoreGraphics.dll cited in the iTunes events?
Also check for error events happening a few seconds prior to the iTunes events. Open those events. Do they all cite the same .ttf file? If so, what's the precise spelling of the .ttf (font) file?
YES! There is a CoreGraphics.dll cited in the iTunes event. This is what exactly the window said
"Faulting application iTunes.exe, version 9.0.3.15, faulting module CoreGraphics.dll, version 1.0.60.0, fault address 0x00266560."
For the .ttf file, this is what it showed.
"Windows cannot access the file C:\WINDOWS\Fonts\ARIALUNI.TTF for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program ARIALUNI.TTF because of this error.
Program: ARIALUNI.TTF
File: C:\WINDOWS\Fonts\ARIALUNI.TTF"
I hope this will help. I still cant open iTunes. -
Errors when compiling the web service (SAP Web Service Design Tool)
After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PMHello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]
Maybe you are looking for
-
Would lIke to know how to add an Logo to a Local Catalog in iProcurement
Here is My Requirements: I have created a Local Catalog in iProcurement. By going to eContent Manager...one has the ablility to create a logo and attach it to the local catalog. I did attach a logo from a url address. And I am able to see logo but th
-
TS3899 Problem with e-mails after upgrade to IOS6 on iPhone 4S
I can no longer sync my e-mails (Yahoo) on my iPhone 4S after I upgraded to IOS6. It was fine with my previous version of IOS5... I tried all of the methods suggested already (restarting device, deleting and adding mail account again) but still no lu
-
Adobe Acrobat 5.0 - Text Free Tool Problem
I'm using Adobe Acrobat 5.0 on my office pc. When I use text free tool to key in the text, the letters are not visible. Therefore you will not able see letters when you start typing or keying in the text box. Is there any solution? Pls help......
-
No G/L account has been specified for O /USD for the bank
Dear All, When i run automatic payment using F110 there are an error message "No G/L account has been specified for O /USD for the bank" What should I do to solve this problem ? Thank You. -tweety-
-
My organisation is planing to move from IE to firefox. need help
we are planing to move from Ie to firefox. we will be doing it on a large scale it will be on linux platform wht will be the requirements to do so how good is firefox on linux do we have any process docs on how to do it