Run time error when trying to import bookmarks from firefox
When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.
In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
* The first (gear) button is the Organize button with basic edit menu items for bookmarks
* The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
* The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
Hover each button to see the tooltip or click each of them to see what they do.
* https://support.mozilla.org/kb/how-do-i-use-bookmarks
Similar Messages
-
Run Time Error when trying to get into the organizer
Does anyone know when I keep getting a run time error when I'm trying to go into the organizer and how I get it to go away?
The answer is that maybe someone does know ... but unless you give us the basic details of what you are doing, we probably can't help.
So ...
What version of PSE?
What operating system?
What is the EXACT word-for-word verbatim error you are seeing?
Does any part of PSE (like the "splash" screen) pop up before this error? If so, describe it or give us a screen capture.
Please provide all requested information. -
I get aq run time error when trying to load the latest version of iTunes. Help.
I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?
Hi jalbany,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Run time error when trying to complete a build
Hi,
I'm running a copy of CS5 Master Collection on a Windows 7 64 bit PC and using Encore to build an interactive DVD. I have been using the program for about a year and had no problems however this week I have been unable to complete a build.
When I set the program to run a build, it spends a long time (over an hour) building motion menus, then moves on to 'Transcoding' and at some point in this process I will get a "C++ Run Time" error message and I am forced to shut down the program and start again.
I have tried building both a DVD Disk and a DVD image but both have the same result. I have also set the assets files to 'Dont transcode' in the project bin however this does not make any difference.
Can anyone suggest anything else I could do?
Thanks
ChrisHi,
Many thanks for the advice. I wanted to give you a bit more information.
I have just attempted another build using 'Run as Administrator' ( to rule it out) however it has come up with the same message at the same point.
The message is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C:\...
This application has requested the Runtime to terminate it in an unusual way
Please contact the application's support team for more information.
To answer your questions: I am not using Dynamic Link or Premiere Pro for this project. The video files I have imported were created in either 3D Max or Aftereffects. These files were rendered as lossless AVI's and then we used Sorensen Squeeze to convert them all into DVD native MPEG2 files. The audio files we are using were converted to DVD native audio files (MPEG2 audio) in Aftereffects.
We did this in an effort to ensure a high standard of quality.
Regarding the kind of files - we are giving encore the MPEG2 video files, MPEG2 audio files and PSD menus.
One other thing to mention - the error comes up at the same point each time I try a build. The progress screen on encore says 'Transcoding' however we have set all of the files to 'Don't Transcode' - this seemed strange to me however I could be wrong.
We do have some long file names in the project so I may have to amend these however I wanted to see if you could suggest anything else first.
Thanks again,
Chris -
Getting Run time error when trying to open WAD
I get the following message when opening WAD either from Business Explorer or from the start menu of the window.
run time error '438'.
Object does not support this property or method.
Any Insights? I was able to do this earlier.
Thanks
Amit.Stefan,
What is your front end patch level ? to find out , open the Logon pad ad right click on the icon on the status bar and select about , you will know the patch level for the same , that might give you some idea , what you have to possibly do is implement a front end patch.
Arun -
Have a problem importing my photos to iphoto '11. Keep getting an error message. Tried deleting some photos from iphoto as well as my camera, but it didn't help. Can anybody tell me why this is happening?
what happens when you use Image Capture (in your applications folder) and see what happens
LN -
AMIE:javac error when trying to import devices from Zenworks
Hi.
Service Dek 6.5, Zenworks 11.1. I'm trying to import device information from zenworks into Service Desk using AMIE. I can connect to the Zenworks database fine in the, but when I click import I get an administrator alert: "javac is not available. Make sure you are using the JDK"
This is reported as an informational alert rather than an error. Synchronisation in progress is reported, but when it completes nothing appears to have been imported.
I've tried ZENworks Configuration Management v11.1 (LiveTime Software Inc.) Import and ZENworks Configuration Management v11.1 - Hardware (LiveTime Software Inc.) import.
Can anyone advise please?
Many Thanks
Osh..Am 20.12.2011 14:06, schrieb Sector osh:
>
> Hi.
>
> Service Dek 6.5, Zenworks 11.1. I'm trying to import device information
> from zenworks into Service Desk using AMIE. I can connect to the
> Zenworks database fine in the, but when I click import I get an
> administrator alert: "javac is not available. Make sure you are using
> the JDK"
>
> This is reported as an informational alert rather than an error.
> Synchronisation in progress is reported, but when it completes nothing
> appears to have been imported.
>
> I've tried ZENworks Configuration Management v11.1 (LiveTime Software
> Inc.) Import and ZENworks Configuration Management v11.1 - Hardware
> (LiveTime Software Inc.) import.
>
>
> Can anyone advise please?
>
> Many Thanks
>
> Osh..
>
>
You have to install the JDK without JRE!
(You have to deselect JRE during JDK installation, else the
NSD-installer takes the JRE-path and not the JDK-path.)
HTH
Hans-Dieter -
Run Time Error when trying to select hierarchy node
Hy all,
the situation is the following:
i attempt to create a variable of type "hierarchy node" (for cost center cha) in my planning area, i used the replacement type "user defined value", check on "input allowed by user" and then i create the user entry, in selection condition i run match code and when i try to select a single cost center (not a hierarchy node) expanding the hierarchy tree the system goes dump with the following message:
Runtime Errors MESSAGE_TYPE_X
Error analysis
Short text of error message:
Program is inconsistent -> see long text
Technical information about the message:
Diagnosis:
An inconsistent program status has occurred. The program cannot be continued.
System response:
The system crashes.
Procedure
1. Look in OSS for a note under the error message UPC099.
2. When you open a problem message, send the first pages of the
system crash message including the section 'Source code excerpt
' with the message.
Procedure for System Administration
Message classe...... "UPC"
Number.............. 099
Selecting a hierarchy node (not a single cost center but a text node grouping more cost conter) this problem does not occur.
I appreciate (and reward) any hints.
Thanks in advance
FabioHi,
Go through the oss notes with error message UPC099
Dump during hierarchy selection:<b>536694</b>
Dump when reading a hierarchy with intervals :<b>423953</b>
Regards-
Siddhu
Message was edited by: sidhartha -
I keep getting a run time error when trying to update to the current software.
It says that the connection has timed out? I have tried a renaming the file but that does not work either? any help?
Some possibilities:
You are on a network that blocks streaming content or otherwise won't let you access it
You have restrictions set to block some content (Settings App, General, Resrrictions). -
Why do I get a run-time error when trying to start Organizer in PSE10?
This problem started a few days ago. I've un-installed and re-installed the program, but the problem remains. How can I get it back on the air?
This problem started a few days ago. I've un-installed and re-installed the program, but the problem remains. How can I get it back on the air?
-
Run time error when calling a pro*c from oracle apps
When I try to execute a pro*c program from ORACLE APPS it gives
the following error
< program was terminated by signal 11>
But the same program I can able to run from unix
Can Anyone help me out
rgds
-sukuThanks a lot,
I also discovered that dragging the user control onto my user interface doesn't allow alternate activation.
( I actually tried stopping and then starting but the result was the same )
Calling the routines as indicated in the header comments also gave some hiccups ( I had to remark some code to get the system working progrtammatically.
public void Start()
#region Update UI
this.switch1.Caption = "On";
this.switch1.Value = true;
#endregion
daqmxTask.Start();
public void Stop()
#region Update UI
this.switch1.Caption = "Off";
this.switch1.Value = false;
#endregion
daqmxTask.Stop();
#region Methods -
ABAP Run time error when display the Customs Export declarations
Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar type /sapsll/corpar_t
lt_corpar_ht type /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
"/SAPSLL/CUHD_LOAD_SELECTION".
The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
In the source code you have the termination point in line 144
of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep MaddiHi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors ITAB_DUPLICATE_KEY
ABAP Program /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep -
XLRepoter - Run Time Error When running xlreporter report in MS2003 Execel
Hi,
I got this error when trying to XLReporter report in MS2003 Execel : Microsoft Visual C++ Runtime Library. Runtime Error! Program: C:\Program Files\SAP\SAP Business One\SAP Business One.exe. Abnormal program termination. Then the process was terminate.
Regards,
VivianPlease check this thread to have a reference:
XLR run-time error when upgrading from 2007A PL 39 to PL 42
Thanks,
Gordon -
Run time error when loding the WEB clint
Dear
All
I am in sap ides 4.0 I am trying to login the web Clint thru the BSP application in the se80 t code I got in to that code select the BSP application after that cic_ic and F8.
New internet explore opened and asked for user id password after that. The page is loding after that no action but I refresh the page it is saying that ending the section.
I find that i am getting two types of run time errors when page loding i find this thru st22 list of run time errors.
that are 20.10.2008
1.09:26:15 gopinath SAPUSER 800 C SYNTAX_ERROR CRM_MKTTG_PROC_TG_FEXP_BATCH 1
2.18.10.2008 14:05:55 gopinath 000 C DBIF_RSQL_INVALID_REQUEST SAPMSYST 1
and i check in event viewer also in that it is showing that.
SAP-Basis System: Transaction Canceled 00 671 ( SYNTAX_ERROR 20081020092615gopinath SAPUSER 8001 )
with Regards,
Prakesh.Hi
I would suggest you to create a OSS request using service.sap.com and ask SAP to help on this
Regards
Madhan -
It generates an error when trying to import a version apex 4.0 production.
It generates an error when trying to import a version 4 application to production. The copy was made as an apex 4 EA 2, (I have backups of different times in July). The error:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 4, column 1: PLS-00306: wrong number or types of arguments in call to 'CREATE_PAGE_ITEM' ORA-06550: line 4, column 1: PL/SQL: Statement ignored <pre>declare h varchar2(32767) := null; begin wwv_flow_api.create_page_item( p_id=&gt;298101103038895115 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_flow_step_id=&gt; 45, p_name=&gt;'P45_PRODUCTBACKLOG'This is the response that sends the team apex.
Production is very different than our EA versions. On our EA site, we explicitly stated that an export from there may not work against 4.0. From your error, it looks as if the create_page_item procedure changed between EA2 and production. The only recommendation is to take an export from production and compare the statements used for create_page_item. If you can update your EA export to match the new format, you might be able to import but again, that action is unsupported.
-- APEX Support Team
Maybe you are looking for
-
Reading from the Applet's JAR file.
Is it possible to read a file stored in the jar file that the (unsigned) applet is being executed in? I have a line that goes like (in is just an InputStream): in = getClass().getResource( "/exercise.xml" ).openStream(); and then, in another class, i
-
HT201272 My cloud songs no longer show up in my itunes library
I chose to view items in the cloud so that my cloud songs would show up in iTunes alongside my downloaded songs. That is no longer an option and I can no longer access my cloud items. What could be the problem?
-
Hi All, Can any one help to know different payment exceptions in automatic payment run i.e f110. Thanks in advance
-
Problem with Date Format in a Table.
Hi, I have several views, in each views I have two tables with two fields of date. This data are from an adaptive RFC function exported in Date ABAP format. The webdynpro is showing me the date in mm/dd/yyyy format, and I want to change that to dd/mm
-
All of a sudden my mac started running very slow. first i opened activity-monitor to see what was wrong. I didnt see any unusual ram-usage. But the kernel_task had a CPU-time of 32 000. I cant seem to find any other explenation for why this is happen