Run time error while installing Labview 8.6.1 in Vista x64
hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....
Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...
Similar Messages
-
Error while installing LabVIEW on Linux
Getting Error while installing LabVIEW on Linux and unable to use VISA.
Please check the installation Log i Have attached.
nilesh
Attachments:
Installation Log LV2012 Linux.txt 25 KBI could not find a trail version for LINUX.
Its only available for Windows and mac.
Will it possible for you to give just the C++ library and include files?? -
Run Time Error while Entering Quantity in Sales Order
Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 ScreenshotDear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson -
Run-time error while executing alv grid report
Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER_1
EXPORTING CONTAINER_NAME = CONTAINER_1.
CREATE OBJECT GRID1
EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'VBAK
CHANGING IT_OUTTAB = IT_VBAK.
Reward points if useful. -
MIGO run time error while excution
Hi,
I have getting run time error while executing MIGO transaction.
Syntax error in program "CL_EX_MB_MIGO_BADI============CP ".
the type "MB_MIGO_BADI" is unknown.
Regards
AbdulHi Rashid
The error clearly states that the BADI MB_MIGO_BADI is not present in your system.
Just go to SE18 & enter the name of the above BADI & check if it exists there.
Also if the BADI exists, just check if there is an implementation created for the same.
Hope this helps.
Regards
Abhii -
Run time error while doing VL10B transaction for STO
Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
in
procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umeshThese Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures. -
Run time error while using Class gcl_error
Hi All,
I am getting run time error while using class gcl_error
type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson -
Run time error while Creating IDN and Inbound Delivery
Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@MHi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath -
System is giving ABAP run time error while perform LT06 or create TO with r
Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav -
ABAP run time error while perform LT06 or create TO with respect to posting
Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
> P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper. -
Portal run time error while accessing R/3 transaction code
Hi all,
We have configured R/3 system and BW system to the Portal.
In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
Can any body have some ideas about this , pts will be assigned,
Thanks ..Have you collected the error log details which looks similar to the below one??
"The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)" -
Run time error while logging from a client
hi all,
My server is connected to 10 clients. out of that 2 clients are suddenly showing error while logging.
Microsoft visual studio C++(error window)
run tme error
debug
error c:/program files/sap/sap business one/sapbusiness one.exe
This is the error window showing. I have uninstalled the client and again installed it but with no results. I found in the path mentioned above there should be the client run file "sap business one.exe", which is not present. I mean the .exe is missing. the file shows "sap business one" only.
whenever we install the client then i the folder
c:/program files/sap/sap business one
there is a .exe file. which is not being installed in this client machine. what is being installed is a
sap business one (not a .exe)
when the client icon in the desktop is made to run, the log in screen appears, the list of company and db appears. I have recently upgraded the server to PL 42. so when a company is selected for log in then the client upgrade message also appears. when "ok" is clickd the run time error appears.
where as all other clients are running well after the upgrade.
please help with a solution.
regards,
Raj
Edited by: debraj bhattacharyya on Dec 5, 2008 5:37 PMI have explored all the areas and I hope the problem is with the exe file only. Because I have tried an option. I copied the entire file SAP Business One (in the C:
Program Files\sap) from one client which is working to the client where the error was showing. Then the it started working properly.
But I donot think this will be a permanent solution. Because on reinstaling the client the SAPBusiness One.exe does not appear and to the best of my research i am quite sure that may be the problem.
Any idea from any one for a perfect reason.
Regards,
Raj -
Run-time error R6025 exiting Labview
After I modify a VI and/or Project, I exit from labview by clicking on file->exit. It will generate a R6025 run-time error. If I just open and close labview, this will not occur.
I am running Labview 8.0.1 on windows XP.Humm…..
Sorry to hear that the Norton configuration is locked down,
because we have about half a dozen instances of this error occurring and all
but one were fixed by changing the Norton settings.
There are a couple of other questions that I didn’t ask but
might be relevant if there is to be any workaround. Are you running any VIs
before closing LabVIEW, or just modifying them?
Does this happen on every VI you use, or just on a particular VI? Is there anything else unusual about the
development machine – do you have a different version of Win XP (such as media
edition, or tablet)? Do you have the
same problem with other computers? Would
you be allowed to temporarily disable the script blocking in Norton while you
work in LabVIEW?
I don’t know what role (if any) NI Serial might have in
this, but if you are interested in getting that driver, you can find it here: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BE600707F28?opendocument&node=1...
Thanks again for the reply, let me know how things go-
Travis M
LabVIEW R&D
National Instruments -
Run time error while creating a sales order by va01
hi ,
while i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
error in current abap program "saplv61z" had to be terminated because it has come across the statement that unfortunately can not be executed.
kindly solve my problem.
thanks.Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath -
Run time Error while Creating Expense request
Dear Friends ,
In E-Payment ( Expense Claim ) creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LR_CONTEXT_ELEMENT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
"CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
"PRESET"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
in "PRESET".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 60
of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
in the RAISING clause of its signature.
The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
code begins in line
1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath
Maybe you are looking for
-
No Internet Access thru VPN w/ Windows 8.1
I had VPN working with Internet access & then all of a sudden it stopped working. I suspect one of the Windows AUTO update changed something that made it stop working, but can not be sure. Per other blogs: I tried to temporary disable firewall and a
-
Multiple account for 2 devices
My boyfriend just got an iPhone 4S yesterday, and I set him up an iTunes account. However this is all being done on my computer, since he doesn't have one. How can I download songs to his iPhone from CD's on my computer so they will go directly to
-
Issue in Customizing the Logon Page and Replacing the Logon Panel Image
I have facing problem in Customizing the Logon Page and Replacing the Logon Panel Image in Hyperion Workspace 11.1.2.1. I have tried multiple time. First Replacing the Logon Panel Image. I have following the steps given in admin guide of EPM workspac
-
How can I export my configuration from MAX to another automation system through NI-DAQmx
Hi, has someone of you an idea how i can export my configuration from MAX to another automation system through NI-DAQmx? We created a dll for the communication between the AUSY (not LabVIEW) and NI-DAQmx. The export file .nce is not in ascii format,
-
Custom form moved to 10g becomes slow
Hi All, We have a custom form that works fine in the 11.5.10 instance. We have moved the form to an instance which is upgraded to 10g. The form is compiled with out any errors but when we query the form for certain conditions it becomes slow and is n