Run time error while login to RTF Template

Hi,
I am trying to create a sample report in BI Publisher. but while login into RTF Template I am getting below error.
Please rectify this problem?
Run time error '429'
Active x component can't ceate object
help me out

Runtime Errors         DYNPRO_FIELD_CONVERSION
Date and Time          07.05.2010 08:49:15
ShrtText
     A conversion error occurred.
What happened?
     The current screen processing was terminated, since a situation
     occurred from which it could not continue processing.
     This is probably due to an error in the current screen of the ABAP
     program.
What can you do?
     Make a note of the actions and input which caused the error.
     To resolve the problem, contact your SAP system administrator.
     You can use transaction ST22 (ABAP Dump Analysis) to view and administe
     termination messages, especially those beyond their normal deletion
     date.
Error analysis
     The program flow was interrupted and could not be resumed.
     Program "SAPMJ1IFN" tried to display fields on screen 1210. However, an
     error occurred while this data was being converted.

Similar Messages

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Run-time error while executing alv grid report

Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.

Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER_1
           EXPORTING CONTAINER_NAME = CONTAINER_1.
    CREATE OBJECT GRID1
           EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
    CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'VBAK
         CHANGING IT_OUTTAB        = IT_VBAK.
Reward points if useful.

MIGO run time error while excution

Hi,
I have getting run time error while executing MIGO transaction.
Syntax error in program "CL_EX_MB_MIGO_BADI============CP ".
the type "MB_MIGO_BADI" is unknown.
Regards
Abdul

Hi Rashid
The error clearly states that the BADI MB_MIGO_BADI is not present in your system.
Just go to SE18 & enter the name of the above BADI & check if it exists there.
Also if the BADI exists, just check if there is an implementation created for the same.
Hope this helps.
Regards
Abhii

Run time error while doing VL10B transaction for STO

Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umesh

These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

Run time error while using Class gcl_error

Hi All,
I am getting run time error while using class gcl_error
                                      type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while installing Labview 8.6.1 in Vista x64

hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Portal run time error while accessing R/3 transaction code

Hi all,
We have configured R/3 system and BW system to the Portal.
In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
Can any body have some ideas about this , pts will be assigned,
Thanks ..

Have you collected the error log details which looks similar to the below one??
"The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

Run time error while creating a sales order by va01

hi ,
while i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
error in current abap program "saplv61z" had to be terminated because it has come across the statement that unfortunately can not be executed.
kindly solve my problem.
thanks.

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time Error while Creating Expense request

Dear Friends ,
In   E-Payment ( Expense Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
   The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
   procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
   Since the caller of the procedure could not have anticipated that the
   exception would occur, the current program is terminated.
   The reason for the exception is:
   You attempted to use a 'NULL' object reference (points to 'nothing')
   access a component (variable: "LR_CONTEXT_ELEMENT").
   An object reference must point to an object (an instance of a class)
   before it can be used to access components.
   Either the reference was never set or it was set to 'NULL' using the
   CLEAR statement.
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
   If the error occures in a non-modified SAP program, you may be able to
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the following
   keywords:
   "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
   "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
   "PRESET"
Information on where terminated
    Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
     in "PRESET".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 60
    of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
     code begins in line
    1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while testing a service through transaction SICF/SOAMANAGER

Hi all,
We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
We are not sure whether any other settings or steps required for testing the web services..
Could you please let us know which steps/configurations we are missing?
Details of the run time error.
Service cannot be reached
What has happened?
URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks
Siva

Please ask you Basis admin to perform the following.
1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
4) Activate the required services from tcode SICF
Thanks,
Sridhar

Run time error while closing the CRM Order using BAPI

Hi Experts,
Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
For the custom program we will give input as the order number and execute it, this will close the order.
Here close the order means assigning it to Close status as well assign the reason code.
We have created some reason codes for closed status.
So when the program is run the Order moves from resolved status to closed status along with reason code.
But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
Please find my code which have used in the custom program
Closing the resolved SOs in the system
    CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
        EXPORTING
          objnr                     = iv_guid
          user_status          = lc_status_closed
       EXCEPTIONS
         object_not_found          = 1
         status_inconsistent       = 2
         status_not_allowed       = 3
         OTHERS                        = 4.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining status'.
    ENDIF.
Set reason code
build lt_subject
    ls_subject-ref_guid = iv_guid.
    ls_subject-katalogart = 'A2'.
    ls_subject-codegruppe = 'ZR000003'.
    ls_subject-code       = 'ZR33'.                      " Reason code
    ls_subject-mode       = 'A'.
    APPEND ls_subject TO lt_subject.
build lt_ossset
    ls_osset-ref_guid        = iv_guid.
    ls_osset-subject_profile = 'ZREASON03'.
    ls_osset-profile_type    = 'G'.
    ls_osset-subject         = lt_subject.
    APPEND ls_osset TO lt_osset.
build lt_service_os
    ls_service_os-ref_guid = iv_guid.
    ls_service_os-ref_kind = 'A'.
    ls_service_os-osset     = lt_osset.
    APPEND ls_service_os TO lt_service_os.
build lt_input_fields
    REFRESH: lt_input_fields, lt_field_names.
    CLEAR : ls_input_fields, ls_field_names.
    ls_field_names-fieldname    = 'CODE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'CODEGRUPPE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'KATALOGART'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'SERVICE_PROFILE'.
    APPEND ls_field_names TO lt_field_names.
    ls_input_fields-ref_guid    = iv_guid.
    ls_input_fields-ref_kind    = 'A'.
    ls_input_fields-objectname = 'SERVICE_OS'.
    ls_input_fields-field_names = lt_field_names.
    APPEND ls_input_fields TO lt_input_fields.
     CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        it_service_os     = lt_service_os
      CHANGING
        ct_input_fields   = lt_input_fields
      EXCEPTIONS
        error_occurred    = 1
        document_locked   = 2
        no_change_allowed = 3
        no_authority      = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining reason'.
    ENDIF.
    CALL FUNCTION 'CRM_ORDER_SAVE'
      EXPORTING
        it_objects_to_save   = lt_header_guid
        iv_update_task_local = lv_update_task_local
      IMPORTING
        et_saved_objects     = lt_saved_objects
      EXCEPTIONS
        document_not_saved   = 1
        OTHERS               = 2.
    IF sy-subrc <> 0.
      WRITE : 'Error at saving'.
    ELSE.
      WRITE : 'Successfully Closed'.
      COMMIT WORK AND WAIT.
    ENDIF.
Run time error is coming at COMMIT WORK AND WAIT statement.
Please let me know any corrections are required in the above program.
When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
Kindly provide your feedback.

Hi Dinakar,
You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
Regards - Pawan

Run time error while login to RTF Template

Similar Messages

Maybe you are looking for