Run time error while printing ALV report

Hi,
At the time of printing a report output we get a dump GETWA_NOT_ASSIGNED.
The printer used here is LOCL.
The length of the report increases dynamically according to no. of months given in range.
In report , there are 3 static columns & no. of columns increases by 2 for each month. System is printing the report for 1 month ie. (3+2) columns . but if no. of months increased to 2 ..... no. of columns also increases by 2.... in this case system is giving dump.
Please help.
Thanks in advance,
Vijeta

Hi
1. check the fieldcat ( ie. CURR field without WAERS field.. )
2. check if you want to use colours at calling the ALV.. but you don´t fill the deep structure for the colours...
bestreg Robert

Similar Messages

Run-time error while executing alv grid report

Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.

Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER_1
           EXPORTING CONTAINER_NAME = CONTAINER_1.
    CREATE OBJECT GRID1
           EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
    CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'VBAK
         CHANGING IT_OUTTAB        = IT_VBAK.
Reward points if useful.

Run-time error '13' in ALV report

Hello,
In a standard ALV report we are using Excel report layout. The Excel contains a table and a graph. The excel table refreshes with no errors.
In order to refresh the graph data we recorded a VB Macro but when we run the report (which runs the macro) we are getting the error:
run-time error '13'
When we open the excel report from our workstation (not trough the SAP system) we are not getting this error.
Please Advice,
Amir

hi
this is a bug(error )in microsoft excel:
Run-time error:'13' Type Mismatch" error message when you click a macro or a function on a menu in Excel 2002
Please chec kthis link for the details:
http://support.microsoft.com/kb/821292
Regards
Neha

Run Time Error while generating PDF report

Hi
I am generating reports in PDF format using JClass and JDK 1.3.The code works absolutely fine in windows environment.
But when I try to run the same code in Unix environment on Solaris, I get the following error. What could be the reason?
ERROR :-
Exception in thread "main" java.lang.IllegalAccessError: try to access method sun.java2d.SunGraphics
Environment.initializeProps()V from class sun.java2d.SunGraphicsEnvironment$1
at sun.java2d.SunGraphicsEnvironment$1.run(SunGraphicsEnvironment.java:89)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.<init>(SunGraphicsEnvironment.java:83)
at com.eteks.java2d.PJAGraphicsEnvironment.<init>(PJAGraphicsEnvironment.java:66)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:53)
at java.awt.Font.initializeFont(Font.java:259)
at java.awt.Font.<init>(Font.java:293)
at com.klg.jclass.page.FontBase.<init>(FontBase.java:83)
at com.klg.jclass.page.adobe.postscript.FontPS.<init>(FontPS.java:161)
at com.klg.jclass.page.adobe.postscript.AFMParser.parse(AFMParser.java:170)
at com.klg.jclass.page.FontBase.loadFonts(FontBase.java:114)
at com.klg.jclass.page.FontBase.getFonts(FontBase.java:155)
at com.klg.jclass.page.adobe.postscript.FontPS.getAllFonts(FontPS.java:898)
at com.klg.jclass.page.adobe.pdf.JCPDFPrinter.<init>(JCPDFPrinter.java:119)

The problem is in the PJA toolkit.
Please see their index.html that comes with PJA distribution. Specifically section:
"Why the Java Virtual Machine crashes when I use fonts on UNIX platform ?"

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

MIGO run time error while excution

Hi,
I have getting run time error while executing MIGO transaction.
Syntax error in program "CL_EX_MB_MIGO_BADI============CP ".
the type "MB_MIGO_BADI" is unknown.
Regards
Abdul

Hi Rashid
The error clearly states that the BADI MB_MIGO_BADI is not present in your system.
Just go to SE18 & enter the name of the above BADI & check if it exists there.
Also if the BADI exists, just check if there is an implementation created for the same.
Hope this helps.
Regards
Abhii

Run time error while doing VL10B transaction for STO

Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umesh

These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

Run time error while using Class gcl_error

Hi All,
I am getting run time error while using class gcl_error
                                      type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while installing Labview 8.6.1 in Vista x64

hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Run time error in all standard reports

Hi
Gurus
I got a run time error in all standard reports and error as below.
Unable to fulfil request for 8296200 bytes of storage space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
plz reply urgently.
Thanks in advance
Regards,
sarang

hmmm well reports work with variables and internal Tables.
Those use memory. to be more specific RAM.
in your case there would be about 8 MB of Memory needed, which you aint got.
The problem may be that there just isnt that much available, or that one dialog work process is limited to some number below that.
in anyway like all my precedessors told yah, contact you basis guys to check whether this is a problem or not.

Portal run time error while accessing R/3 transaction code

Hi all,
We have configured R/3 system and BW system to the Portal.
In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
Can any body have some ideas about this , pts will be assigned,
Thanks ..

Have you collected the error log details which looks similar to the below one??
"The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

I get run time error in step Set Report in reportgen_xml sequence

I get run time error in step "Set Report" in reportgen_xml.seq. The error code is "Out of memory".
I don't know what to do.
I use BatchModel, I have 6 batch loops. The problem appears on the 3d loop. I have NI 3.5.
Help me!!!!!!
I send attachment (screen of error).
Attachments:
problem.jpg ‏106 KB

Hi Terry, it happened again :-(
Actually I see that the problem appeares in the same subsequence of my sequence. In that subsequence I have approximately 25 numeric steps, 6 of them are on skip now.
The problem appeares suddenly after many batch loops. I have the message "Error, Parameter new value: Out of memory. [Error code -17000, out of memory].
After that on next loop I see it runs and writes reports for others subsequences and steps, but on the "problem subsequence" again I get message "Out of memory"...
At the one of the problem loops I saw other message "An error occured calling 'Process One Result' in ITSO FlyReportGen of TestStand on-the-Fly-Report-Generator. Out of memory. Source: TSOTFRG [Error Code: -17000, Out of memory].
I use "Discard Results or Disable Results " enable option in the ModelOptions. But without success. Is this a problem of TestStand or may be is this the special problem of my subsequence or any step in that subsequence?

Run time error while printing ALV report

Similar Messages

Maybe you are looking for