Run time error while saving migo
Dear All,
I am doing the subcontracting process. and while saving the MIGO it shows Runtime Error.
Error analysis
Short text of error message:
No taxes on sales/purch.are allowed for account 428304 BS70, V0 is not a
llowed
Technical information about the message:
Message classe...... "FS"
Number.............. 217
Variable 1.......... 428304
Variable 2.......... "BS70"
Variable 3.......... "V0"
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLMBWL
Include LMBWLU21
Row 59
Module type (FUNCTION)
Module Name MB_POST_GOODS_MOVEMENT
BS70 is a company code.
Please help me out.
Thanks & Regards,
Sandeep Patil.
Dear All,
i have done that but now another error is coming as
Error analysis
Short text of error message:
Balance in transaction currency
Technical information about the message:
Message classe...... "F5"
Number.............. 702
Variable 1.......... 00
Variable 2.......... " 5.000,000"
Variable 3.......... "INR"
Variable 4.......... " "
5.000,000 is my po value.
Thanks & Regards,
Sandeep.
Similar Messages
-
Run time error while saving sales order
Hi all,
i am working on IDES ECC 6.0, when i am saving an sales order(OR) i am getting run time error in the table CRMPAROLTP, program SAPMV45A.
i am using 4 GB RAM, still having a space of 30 GB for only IDES to save the data.
so, how to solve it.Hello,
I doubt the runtime error (I am assuming you mean that you got a short dump) you mentioned in your original post has anything to do with the warning messages you see when doing a check (Ctrl+F2) on table CRMPAROLTP and program SAPMV45A. These warnings should not cause a short dump or runtime error.
The warning message for the table has the following long text:
Table CRMPAROLTP: Key length > 120 (Restricted functionality)
Message no. DT214
Diagnosis
The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
System response
This is a warning.
Procedure
Note the following restricted fuctionality for this table:
- Table contents cannot be transported by specifying key values, at
best by specifying generic key values with a maximum length of 120
bytes.
- The table may not be used as the base table of a lock object.
The warnings in SE38 for program SAPMV45A are mostly related to Unicode and have no reference to the table CRMPAROLTP.
If you haven't already done so, please check the SAP Note referenced in my first reply since this does provide a solution for short dumps related to table CRMPAROLTP.
Of course, since I don't know specifically what the short dump message is that you received, I could be basing my assessment on false assumptions. If you have those details it is better for the SDN community as a whole if you include the information in this thread instead of sending it to me offline.
Best Regards,
Jamie -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj -
Run time error while saving values in File (Tcode)
Hi,
I am using FM call function 'FILE_GET_NAME'
exporting
logical_filename = logical_filename
parameter_1 = program_name
parameter_2 = file_id_param
importing
file_name = physical_filename
exceptions
file_not_found = 1
others = 2.
for this I am trying to maintain dynamic values(field symbols) in Tcode FILE Logical file name definition , physical path as.
Physical file =<PARAM_1>.<PARAM_2>
But while saving it dumps, saying filed symbol assinment to substring is not allowed.
Physical path for the same is /<V=Z_DIR_MAIN>/<SYSID>/<V=Z_DIR_OUT>/<FILENAME>.<CLIENT>.<DATE><TIME>.
Regards
Mohinder Singh ChauhanHello Mohinder,
the better way to analyse these kind of things is by entering the function module in se37 and providing the required test data.
In your scenarion as you say its throwing a runtime dump related to field symbols better you concatenate the data param1 and param2 into a new variable and then pass that value into the function module.
Thanks,
M.Naveen kumar -
Run time error while saving the production order in CO02
HI Experts,
While i am releasing and saving the production order the system is giving the runtime error. Please help.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_SLD_API_EXCEPTION
Error analysis is
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SLD_API_EXCEPTION', was not
caught in
procedure "GET_ACCESS_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Internal error in method
A Quick response is required.
Regards
Dinakar SarmaHi,
Please check below link for your issue , it may useful
http://forums.sdn.sap.com/thread.jspa?messageID=10815298#10815298
Regards,
Ram -
Run time error while saving a sales order
After CIn configuration when i raise the sales order i cannot save it. when i click on the save icon the following runtime error message x302 (v3) with the short dump.. pls guide..
thanks...Hi sanjitdutta,
Please get in touch with your ABAP team to know wat exactly is teh cause for the short dump. Please post the error description completely.
Thanks
Arun
Edited by: arun subramani on May 16, 2011 7:06 AM -
MIGO run time error while excution
Hi,
I have getting run time error while executing MIGO transaction.
Syntax error in program "CL_EX_MB_MIGO_BADI============CP ".
the type "MB_MIGO_BADI" is unknown.
Regards
AbdulHi Rashid
The error clearly states that the BADI MB_MIGO_BADI is not present in your system.
Just go to SE18 & enter the name of the above BADI & check if it exists there.
Also if the BADI exists, just check if there is an implementation created for the same.
Hope this helps.
Regards
Abhii -
Run Time Error while Entering Quantity in Sales Order
Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 ScreenshotDear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson -
Run-time error while executing alv grid report
Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER_1
EXPORTING CONTAINER_NAME = CONTAINER_1.
CREATE OBJECT GRID1
EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'VBAK
CHANGING IT_OUTTAB = IT_VBAK.
Reward points if useful. -
Run time error while doing VL10B transaction for STO
Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
in
procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umeshThese Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures. -
Run time error while using Class gcl_error
Hi All,
I am getting run time error while using class gcl_error
type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson -
Run time error while Creating IDN and Inbound Delivery
Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@MHi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath -
Run time error while installing Labview 8.6.1 in Vista x64
hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem... -
System is giving ABAP run time error while perform LT06 or create TO with r
Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav -
ABAP run time error while perform LT06 or create TO with respect to posting
Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
> P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.
Maybe you are looking for
-
Audigy(1) Platinum PCI Not Detected By Installation CD In New Desk
Hello, I just updated to a new computer and pulled my Audigy Platinum SB0090 (with the front dri've panel) out of my old system and installed it in my new systemell E52 (AMD dual core)Windows XP SP23GB memory?) I disabled the onboard sound in the BIO
-
Error provisioning a resource with custom approval process
Hi, While trying to provision a resource with custom approval process, I get the following error: <May 11, 2012 8:07:18 AM IST> <Warning> <oracle.wsm.agent.handler.wls.WLSPropertyUtils> <BEA-000000> <WLSPropertyUtils:getOperationName(),operation name
-
My ipod have some error !!!! Help me....
I cannot sync my video to may ipod, I try to sync, but it send error : " the ipod cannot be synced. The disk could not be read from or written to " And all my videos in my ipod are gone !! . my ipod is black but it became white when I lost my video i
-
Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1
Windows Server 2012 with latest updates and SharePoint 2013 with latest updates: I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error: Error in Configuration Wizard Resource id to be retrieved is PostSet
-
HT2534 I didnt find (None) Option in the Payment Details List
Require help