Run time error while testing a service through transaction SICF/SOAMANAGER

Hi all,
We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
We are not sure whether any other settings or steps required for testing the web services..
Could you please let us know which steps/configurations we are missing?
Details of the run time error.
Service cannot be reached
What has happened?
URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks
Siva

Please ask you Basis admin to perform the following.
1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
4) Activate the required services from tcode SICF
Thanks,
Sridhar

Similar Messages

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Run-time error while executing alv grid report

Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.

Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER_1
           EXPORTING CONTAINER_NAME = CONTAINER_1.
    CREATE OBJECT GRID1
           EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
    CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'VBAK
         CHANGING IT_OUTTAB        = IT_VBAK.
Reward points if useful.

MIGO run time error while excution

Hi,
I have getting run time error while executing MIGO transaction.
Syntax error in program "CL_EX_MB_MIGO_BADI============CP ".
the type "MB_MIGO_BADI" is unknown.
Regards
Abdul

Hi Rashid
The error clearly states that the BADI MB_MIGO_BADI is not present in your system.
Just go to SE18 & enter the name of the above BADI & check if it exists there.
Also if the BADI exists, just check if there is an implementation created for the same.
Hope this helps.
Regards
Abhii

Run time error while doing VL10B transaction for STO

Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umesh

These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

Run time error while using Class gcl_error

Hi All,
I am getting run time error while using class gcl_error
                                      type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while installing Labview 8.6.1 in Vista x64

hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Portal run time error while accessing R/3 transaction code

Hi all,
We have configured R/3 system and BW system to the Portal.
In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
Can any body have some ideas about this , pts will be assigned,
Thanks ..

Have you collected the error log details which looks similar to the below one??
"The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

Run time Error while executing project infosystem reports (CN41/41N)

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi Rakesh,
The memory which can be managed by the logical database is approx.
100 MB. You can use the following rule of thumb to calculate the
allocated memory of your selection:
[( sum of projectdefinitions + sum of WBS elements + sum of networks and orders ) * 1 KB + ( sum of activities     ) * 4 KB ] *2,5 = memory consumption
Further objects - as relationships, capacities, ... will increase
the memory consumption. (see note 107605)
You can find out the number of objects bein used using the "Test selection scope" (CTRL+F12) button in CN41
Other recommendations are:
1) Check the profile (parameter "rdisp/PG_MAXFS") with your Basis
   colleague and adjust upwards (Note 133909)
2) Select a smaller range of objects by using status schema
   or more dynamic selections. Please review SAP Note 206264.
3) Please review also 107605, which gives you further information
   concerning the selection in Project Information System.
Hope this helps!
Regards
Martina
Message was edited by:
        Martina Modolell

Run time error while creating a sales order by va01

hi ,
while i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
error in current abap program "saplv61z" had to be terminated because it has come across the statement that unfortunately can not be executed.
kindly solve my problem.
thanks.

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time Error while Creating Expense request

Dear Friends ,
In   E-Payment ( Expense Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
   The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
   procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
   Since the caller of the procedure could not have anticipated that the
   exception would occur, the current program is terminated.
   The reason for the exception is:
   You attempted to use a 'NULL' object reference (points to 'nothing')
   access a component (variable: "LR_CONTEXT_ELEMENT").
   An object reference must point to an object (an instance of a class)
   before it can be used to access components.
   Either the reference was never set or it was set to 'NULL' using the
   CLEAR statement.
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
   If the error occures in a non-modified SAP program, you may be able to
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the following
   keywords:
   "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
   "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
   "PRESET"
Information on where terminated
    Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
     in "PRESET".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 60
    of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
     code begins in line
    1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while running BDC for production order creation and confirmation:

Dear Gurus,
We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
and the transaction code is coming for CO11N.
How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
Regards,
Madhu.G

Hi Madhu,
Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
Cause
The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
such as the confirmation texts.
Resolution
SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
If this is not feasible, the following workaround may be uses:
Define a confirmation profile in transaction OPK0;
In the detail areas, remove the area "Confirmation text";
Set this profile as standard, so that it is chosen automatically by the system when a batch-job
is started;
Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
Thanks & Regards,
Ramagiri

Run time error while testing a service through transaction SICF/SOAMANAGER

Similar Messages

Maybe you are looking for