Run-time License for Vision builder

HI
I have created a VBAI file for my inspection in, but now I want to transfer the inspection LabVIEW and build an exe to run the application.
Now for running that application do I require a NI Vision Builder for Automated Inspection Run-Time License or a NI Vision Development Module Run-Time License.
Thanks,
Ninad Regundwar
Junior Engineer | ARAV Technologies | www.aravtech.com

Instead of migrating to LabVIEW, you might want to consider automating Vision Builder from LabVIEW and running your inspection by using the VBAI API.
Check out the examples located here: C:\Program Files (x86)\National Instruments\Vision Builder AI 2013\API Examples\LabVIEW Examples.
The VBAI API allows to start a VBAI engine, open and run an inspection and retrieve images and results for each step.
When using this method, if you're running the LabVIEW program on the same machine VBAI is installed, you do not need to purchase the VBAI runtime, neither the Vision Development Module Runtime (unless you wish to process further the image returned by VBAI.
If you need to deploy that LabVIEW application on a different machine, then you'll need to purchase a VBAI Runtime license.
If you choose instead to migrate the inspection to LabVIEW, then you will need to purchase a full license of Vision Development module for your development machine (the code generated uses Vision Development Module VIs).
If you choose to build the resulting code into a LabVIEW application and deploy it on a different machine, you will need a Vision Development Module Runtime License for the deployment machine (but not a VBAI license).
Migrating the code to LabVIEW is recommended only in cases where you need to modify the code generated by VBAI. The code generated is indeed a lot more complex than using the VBAI API that I described in the first option.
Hope this helps.
Best regards,
Christophe

Similar Messages

  • Vision Development Module Run Time License?

    Dear all,
    I wish to install an application I have built at university onto a laptop for use in another university. The application uses the NI-IMAQdx driver for acquisition from 2 USB cameras, as well as various VIs from the vision development module.
    I know that there is no legal issue with distributing the Labview Run Time engine but I would like to know where I stand with the vision side of things.
    To install this application on the laptop will I need to purchase the Vision Develpment Module Run Time License and the Vision Acquisition Software for this laptop, if so how would I inculde this in the install?
    I notice that the install GUI gives me the option to include the run time engines and drivers but I am not sure how this works without the license?
    Also any idea on cost?
    Any advice would be great,
    Regards,
    Joe
    Solved!
    Go to Solution.

    Hi Liam, 
    Thank you for your reply.  So just to get this straight, I would build the application and installer as normal but include the vision development run time engine in the install as well as the NI-IMAQdx driver for the cameras and the Labview run time engine.
    After installation on the laptop I assume it wil prompt me for activation keys  to enable the vision development run time engine. 
    Would it also be possible to download the run time enviroments separatley on the laptop rather than including them in the install, is this a better way of doing it?
    In your email you made it sound as if the license for the vision development run time engine covers the drivers as well, is this the case or do I need a separate license for the acquisition software (ie the NI-IMAQdx driver)?
    Thanks for your help,
    Joe

  • NI Vision Development Module Run-Time License

    I need remove the Run-Time license, Because I need format the computer had drive
    then I need re-install the license at the same computer.
    There is a Procedure?
    Thanks

    Hello Truck123,
    I believe this KnowledgeBase has the information you are looking for:
    KnowledgeBase 3TUA30KK: How Do I Deactivate or Remove my License for an NI Product?
    http://digital.ni.com/public.nsf/allkb/6BF2C6CF85611A7B86257107005DEEFA
    Regards,
    Tom L.

  • Run time license

    I am planning for a system that may be distributed to multiple locations.
    I want to know if the system is developed in Labview, do I need to install a RUN time system in each computer, and usually, do we need to buy a license for each of the run time system installed?
    I know that for LV 2009, it seems that it requires a RUN TIME ENGINE for any Labview system, I remember for LV 7, it does not need that. Is that correct?
    I may also need to use the Vision module, it does have another RUN TIME system, and do we need to purchase a license for each installation?
    How about the image acquisition and the camera driver, again, if that part of the function is used, do we need to be purchase a license for each installation?
    How about system implemented in Lab windows?  Is there a Run time license needed and do we need to purchase for each of them?
    Thanks

    akang wrote:
    I am planing for a system that may be distributed to multiple locations.
    I want to know if the system is developped in Labview, do I need to install a RUN time system in each computer,
    Yes
    do we need to pay for each of the run time system installed?
    No (I'm talking about the LabVIEW RunTime).
    I know that for LV 2009, it seems that it requires a RUN TIME ENGINE for any Labview system, I remember for LV 7, it does not need that. Is that correct?
    No. All versions of LabVIEW have required the RunTime Engine for built applications. With old versions this was pre-"attached" into the application. But it was still there.
    I may also need to use the Vision module, it does have another RUN TIME system, do we need to purchase a license for each installation ?
    Yes
    How about the image acquisition and the camera driver, again, if that part of the function is used, do we need to be purchase a license for each installation ?
    See here.
    How about system implemented in Labwindows? Is there a Run time license needed and do we need to purchase for each of them?
    Yes. But like the LabVIEW one, it's free.
    NOTE: All of the answers above could have been found from a simple search on the NI site for "run-time license".

  • How can we buy a license for Flex Builder 3?

    We develop apps using Flex SDK 2 and it is not compatible with Flex Builder 4. Is it possible for you to provide license for Flex Builder 3?

    quote:
    Originally posted by:
    rob_parkhill
    Convert it to an AIR Application?
    Thanks Rob,
    This may be what I'm looking for, but I don't know enough
    about the difference. I guess I should have pointed out that I'm a
    complete Flex Novice!
    Anyway, with Flex Builder, I created an MXML Application. I
    went through all my various options again in Flex Builder and found
    that under the project menu, I could export a release build in what
    appears to be the format you mentioned. I managed to create a .air
    file, but it is not a recognized file type on my computer. I tried
    double clicking it and the built-in windows services couldn't even
    find a possible way to run it. Am I missing some important step?
    Thanks again.

  • Reg. run-time license

    hi,
    I want to know whether Oracle has a run-time licensing scheme for this Oracle Spatial 10g RDF mgt platform.
    if anyone have idea about this pls rply
    bye
    [email protected]

    Hi,
    RDF is part of Oracle Spatial, so you need the Oracle Spatial option
    license to use it.
    I am not sure what you mean by "run-time licensing scheme."
    siva

  • Can I purchase a license for Flash Builder 4?

    I'm enjoying using the Flash Builder 4 plug-in for Eclipse. It is saying that i will soon need to enter a serial number. I only see licenses for Flex Builder 3 available for purchase.
    Can I purchase just a license for FB 4? If not now, then when? Is there some other way I can keep using FB 4 until then? I don't want to purchase a license for FB 3 (to keep using the FB 4 beta) and then have to purchase a separate upgrade later.
    Thanks!

    Hi,
    Flash Builder 4 license are not available for purchase at this time. To extend your beta license you will need a valid FB 3 license. We'll be having another beta at the end of this year, but it will also have a trial period which will only be extended with a FB 3 license.
    Vera

  • I need to buy a license for Flex Builder 2.0 as I do?

    I need to buy a license for Flex Builder 2.0 as I do?

    The Airport built-in to the iMac is exactly the same standard as that used in PC's 802.11b/g compatible and possibly 802.11n as well depending on the model. It means that anywhere you use can use a PC for wireless you should be able to use the iMac. It sounds as though your wireless network is protected with a WEP Key or similar encryption method and you have not entered the correct key into the iMac when attempting to join the wireless network or have not selected the appropriate key type from the drop down list. Quite a common situation is that if your password for your wireless network is a hex key, i.e only contains the numbers 0-9 and letters A-F then you need to select WEP Hex Key as the password type when joining the wireless network not WEP Password.

  • Problem: Run Time Evaluation for Future Period

    Hi SAP Gurus, can someone help me solving this problem:
    My client need to run time evaluation for 2-months period ahead of time. But every time I tried, time evaluation always stops at end of the current month, no further dates in the future. I had created attendance data 2002 for all the future dates. IT7, 2002, 2006 and all configurations seem to be OK (T510S,T569R). Test run is also OK with good future results. What could possibly be missing? Thank you in advance.
    Bill

    Thank you very much, Arun, Banu, Stefan and Om.
    Yes, I have entered the "Evaluation up to" date (60 days later);
    The schema has a function "Check FUT".
    Test future run result was generated correctly.
    Still I can't have future results in real run.
    So, what else I should check into?
    Thanks again.
    Bill

  • An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

    Hi I m getting the below wxpection when i run test browser from workshop. please help me.
    An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

    Thamarai,
    Can you provide more information on your jws ? Also can you start the server
    from the command line with verbose option. This will cause
    weblogic_debug.log to be generated in the domain folder.
    Raj Alagumalai
    Backline Workshop Support
    "Thamarai Selvan" <[email protected]> wrote in message
    news:[email protected]..
    Hi I m getting the below wxpection when i run test browser from workshop.please help me.
    >
    An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
    java.lang.reflect.InvocationTargetException:null

  • LabVIEW version for Vision Builder AI 2012 plugins

    Hi all,
    Ii was a bit of a challenge to find out which version of LabVIEW was necessary to develop custom plugins for Vision Builder AI 2012, I found it by starting the installler, it is LabVIEW 2011 (but I wish I could find this information in Vision Builder AI 2012 readme file).
    Now my question is : is it possible to use LabVIEW 2011 SP1 to develop custom plugins for Vision Builder AI 2012?
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Solved!
    Go to Solution.

    Right... I tried, I installed all the VBAI and LabVIEW versions I could.
    I turns out LV 2011 sp1 is just an upgrade of 2011 and as such LV2011 SP1 can be used to develop custom plugins for Vision Builder AI 2012.
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • Getting run time error for multiple counter plan

    Hi Friends,
    Its very critical issue,wherein i am getting run time error for multiple counter plan.
    Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
    Please find the screen shots for your reference and please let me know how to fix the issue.
    Regards,
    Srinika

    Hi,
         Please check reason for update termination in Transaction code SM13.

  • Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

    Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
    Regards
    TD

  • Unable to run time evaluation for the entire year...

    hi experts,
    I'am unable to run time evaluation for the entire year, even though mentioned the date as Force calculation as of : 01.01.2010
    and evaluation upto date : 31.12.2010.  when time evaluation is run , the log is only run for Jan 2010.
    Maintained IT2011 from 01.01.2010 to 31.12.2010
                      IT0050 from 01.01.2010 to 31.12.9999
                      IT0003 : PDC recalculation : 01.01.2010
    Kindly advise.
    Regards
    Pammi

    Check if Time Management status is 1 or 9....
    If it is 1 then it would not run for the entire year..It would run only till today. If it is 9, then the TE runs for future also...also check if in the schema it is activated for future runs or not...

  • How many computers can we run our license for LabVIEW at the same time?

    We have LabVIEW 8.2 and we need it to operate on several machines at the same time. How can we do this? Can we check to see if our current license allow us to do this?

    Are you talking about developing code on multiple machines or just running programs? If you build your applications into an executable you can deploy those to any machine without buying anything else. If you need the full development environment on each machine but will not be doing development on them look for something called a Debug License.
    =====================
    LabVIEW 2012

Maybe you are looking for

  • How to retrieve the selected value in f4if_int_table_value_request

    hi guys, I have created a search help using fm f4if_int_table_value_request,my value table contains several fields including vbeln. When i am selecting a record the return table is capturing the last column of the record but i want to select the vbel

  • Pipelined function with lagre amount of data

    We would like to use pipelined functions as source of the select statements instead of tables. Thus we can easily switch from our tables to the structures with data from external module due to the need for integration with other systems. We know thes

  • I got my iphone replaced how do i sync my icloud data

    today i got my phone replaced and i skipped through the setup because i was in a hurry now i need to back up my iclod data.. how do i do that

  • Installed new hard drive, but now cannot get OS X 10.5 to install?

    Hi everyone, I seem to have gotten myself into what is probably a very stupid position, so fair warning on what you're about to read. I have a Macbook Pro 17-inch, early 2011, 8 GB Ram, 2.2 Quad-core, Model A1297.  The original hard drive (750 GB Tos

  • Client Agent installation on SCCM Primary Site Server

    Hello, I Installed Client agent via Client push to my SCCM Primary Site. Installation was sucessfull (Return code 0 in ccmsetup.log). But in console still the client status shows 'NO'. Is there any difference when installing Client agent on Primary S