Run time prompts not appearing when launching BR from a right click menu

Hi!
I have a problem when trying to launch a business rule from a right click menu which is assigned to a dataform.
The rule launches but does not show/ask for the run time prompts as it should do. The run-time prompts should not be hidden (I checked also Eas and data form selections).
When using the rule form the Tools-Business Rules menu, the rule works fine. It prompts for the required variables and as they are filled in, the rule does what it is expected to.
Also, when using the same rule attached into a form (and selected "use members on form"&"run on save") the rule works correctly.
We are using version 11.1.2.1.
I already have tried restarting Planning services but without success.
What might cause this?
kind regards,
user637777

Hi!
I found out from the Oracle knowledge base:
This issue is caused by unpublished Bug 11064867 - RIGHT CLICK MENUS NOT RENDERING RUN TIME PROMPTS
In version 931 run time prompts worked correctly when launching them from a right click menu, I checked this out.
In our current version I got this working (this is kind of a workaround) by adding a new RTP variable (using the same dimension as the original RTP variable). This way I got the rule to "ask for more information" (like what were you asking for? ) and not running the rule without interruptions. This instruction was given in Oracle support (knowledge base).
kind regards,
user637777

Similar Messages

Run Time Prompts not displaying correct members on Composite webform

Hi,
I have a two row composite form. The top form users select a version and a year. The bottom form is static and for read only display of Actuals from prior year. I have a business rule that needs to run on the top webform only. It also needs to bring in the users selection for Scenario and Year. Problem is every time I hit save to run the business rule, it populates the RTP's with Budget and FY14 and not the values I selected in the top webform. I have 'Use Members from Form' selected on the business rule attached to the composite form. I tried attaching business rule to source form but it doesn't run then. It must be attached to the composite? I think it gets confused and doesn't know which members to use as there are two forms? Any options here?

See if this helps:
When launched from a form, the values of members in the Page/POV take precedence if the Use Members on Form option is selected, regardless of whether the runtime prompt is hidden during design. The business rule is run without displaying the hidden runtime prompt to users, and the runtime prompt values are taken from the Page/POV members.This is not the case when business rules associated with composite forms are launched on save or from the left-hand pane or when business rules are launched from the Tools, then Business Rules menu. In these cases, the Use Members on Form setting is ignored, hidden runtime prompts get design-time values, and the last saved value takes precedence.
http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch06s07s04.html

My keyboard does not appear when i reply from lock screen in ios8?

When I attempt to reply to a text from the lock screen in iOS8, my keyboard does not appear. I have swiftkey installed in addition to the default keyboard. I am using an iphone 6. Any ideas? I am not sure where to begin.
Brian

Hello there, Brian.
The following Knowledge Base article provides some great steps that help when an application isn't functioning as expected or quits unexpectedly.
With the "Restart" step, make sure you go through and close all applications that are running. If after performing the "Restart" step, you find the issue persists, try the reset portion of the instructions:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
If the issue continues unresolved after performing all the recommended steps in that article, you may want to follow these instructions:
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Borders are not appearing when null coming from database

Hello all,
Right now i am working on a report where i am getting data from stored procedure(sql server). The report is having 15 columns so i have created like multi line report and applied borders to each item. so the report look like a table. But the problem is there are some columns whose values in database are null. Beacuse there is no data coming from db these borders are not appearing on report.
I know that we can write a formula in crystal by isnull function to get these borders. But want to do everthing on the stored procedures. Please help me on this.
Thanks & Regards
Ram

Convert the null to 0 or " " using formula before placing it to the table/cross tab. This might helps.
Nevermind because you know the above solution.
You can do one more thing too, if you are not applying any calculations like runing total to any of the column from those 15 column, place each of column in either tax-box (if numeric, covert it to text) or just use the box and lines to draw the table and expand the box and lines till end of group footer.
-Bshukla
Edited by: Bshukla on Aug 16, 2010 2:34 PM

Menus do not appear (via menubar, bookmark toolbar or right-clicking)

I just noticed the other day that my menus are no longer appearing in Firefox. I can see the File, Edit, etc. menu bar, but clicking on the word File does nothing. Pressing Alt+F also does nothing. Right-clicking in a web page doesn't show the usual popup menu. Clicking on things in the toolbars (like bookmark folders) don't show the menus.
I tried running in safe mode, but there is no change. I tried creating a brand new profile but the behaviour is still the same. Most of the troubleshooting steps recommend to disable acceleration, but I don't think this applies - for a start they all say to go to the Tools menu and I can't do this, but opening about:config there doesn't seem to be anything relevant in gfx.*
When I launch Firefox from the Linux command line, it says this a dozen or so times:
(firefox:5116): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
However this is nothing new - it has always worked before.
dbus appears to be running:
$ ps -A | grep dbus
690 ? 00:00:00 dbus-daemon
1173 tty1 00:00:00 dbus-launch
1174 ? 00:00:00 dbus-daemon
What's going on? Why have my menus stopped working??

Thanks for the response!
It's via my distribution's repositories. 64-bit. I just downloaded the version from your link above (14.0.1), which turned out to be 32-bit, and there's no change. I don't get any D-Bus errors on load (only some complaints that a 64-bit plugin was the wrong ELF class and couldn't be loaded), but I still can't make any menus appear. I also tried downloading Aurora (16.0a2) with the same result.
The system requirements should be fine as I have been running Firefox on this machine since I bought it a few years ago, and being quad core with 8GB RAM it should be well above the minimum specs needed.
I'm thinking it's a bug that has been introduced somewhere along the way. Any ideas how I can troubleshoot?

Business Rule Run Time Prompts not saving last values entered

Hello all,
We've had an SR open with Oracle support for several months in regards to this issue and they have yet to give us any constructive feedback. I'm hoping that someone out there has run into this and maybe found a resolution to the issue. We're running EPM Planning/Calc Mgr 11.1.1.3.04.
Our Planning end users are trying to "use last entered value" to get the prompts to default to users last used values, in Calc Mgr for a variable which has limits idesc(dim) and is limited to the planning application scope. The variable has no default value set.
However when they run the rule with a given value in the prompt, when they relaunch the rule later the prompt is not defaulting back to the last used value. We tried to redeploy the rule, just to see if it makes any difference but that seems to have no effect.
Thanks in advance,
-Bob

Spoke to my EPM Analyst who is working this issue with support and has more functional knowledge of what is going on.
She checked the members/member selection and this did not change the results.
While working with Oracle support they did try to select "Use Members in Form" and this also did not change the results.
No matter what they select with the business rules, it is not retaining that value the next time that it is run. The BR's require that you select a value when running so there is no way to use nothing as the default. My apologies if my description was misleading.
Our analyst has been logging on and off using just her credentials and sees this behavior.
The Global Variables checkbox for save last value is selected.
Regards,
-Bob

I am using Firefox 3.5.9 in Linux Gnome and need to remove the "Set As Desktop Background" from the right click menu or at least disable the users ability to change it from Firefox as I am running a kiosk.

USeing Suse Linux Enterprise Desktop 11SP1 with gnome desktop and Firefox 3.5.9. I have created a firefox user profile and need to remove or restrict the ablitiy of the users to change the desktop background.

See http://kb.mozillazine.org/Chrome_element_names_and_IDs
Add the code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
<pre><nowiki>#context-setDesktopBackground {display:none!important;}
</nowiki></pre>
See also http://kb.mozillazine.org/Editing_configuration

When I select "Paste" from the right click menu, it's greyed out...

Anytime I right click and try to use "Paste", it's greyed out and unavailable.
Update: 12/10/10: 0245 GMT- Issue resolved. Extention "Instaclick" caused this problem. 100% repeatable, multiple reports on authors review section.

Update: 12/10/10: 0245 GMT- Issue resolved. Extention "Instaclick" caused this problem. 100% repeatable, multiple reports on authors review section.

Sequence will not validate with run time prompts in business rules

I am in Hyperion Planning v 1.1.1.3, with Workforce initialized. I am creating a sequence of business rules. The rules use run time prompts within them and validate when used on their own. However, when I insert them in a sequence the sequence will not validate, apparently due to the run time prompts.
The sequence returns the error: Cannot calculate. Essbase Error(1200323): Error parsing formula for [FIX STATEMENT] (line 7): expression expected after [(].
Line 7 in the business rule is as follows:
FIX ([rtpYear],[rtpScenario],[rtpVer],[rtpCC],[rtpBU],[rtpEmp])
The problem is not isolated to this business rule, it occurs with any rule I try.
Can sequences function with run time prompts in the included business rules?
Stephen

I have figured out that if any rtp is hidden in the business rule, the sequence will not validate. Is this expected behavior for sequences?
Additionally, hiding the variables in the sequence has no effect if the variables are not hidden in the rule. When launched from a menu in a web form, the user is prompted for values for all variables (except for the Execution Database Name) although they are prepopulated based on the members in the POV, Page, etc. Is this also expected behavior?
I also find that it won't validate if "Merge launch variables" is selected (I have included rules associated with different plan types and with different dimensionality, so this may be expected). The user is prompted to provide values for every variable in each rule in the sequence, many of them duplicates (though, again, they are prepopulated based on members in the form).
Stephen

Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

Excel not even open - "cannot complete this task with available resources" and then VBA run-time error randomly appear!

Has anyone else seen the "Excel cannot complete this task with available resources" error message appear when Excel isn't even open? It keeps happening to me, and it's the strangest thing.
It seems like interacting with Excel files sometimes prompts it - for example, I just turned on my computer this morning, checked my email, and then opened Google Chrome to upload some Excel files. Excel hasn't been opened at any point since the machine
booted up, but this Excel error popped up while I was uploading the files.
Checked the Task Manager because I was baffled (not that this is the first time it's happened), and there's no Excel application running, just that silly error message. Choose OK on that error and a VBA run-time error message appears (not even sure if it's
Excel VBA or Word/Outlook but I assume it's Excel - it's the good old 1004, application-defined or object-defined error).
Debug is greyed out, so it won't let me debug to see what the problem is. Choosing End brings the "Excel cannot complete this task with available resources" message back for one final performance.
This happens on a not-infrequent basis: Excel isn't open, and I randomly get this set of Excel errors: 1) "cannot complete task", 2) VBA run-time, 3) "cannot complete task" again. Then it's done, until the next time it happens. Weird.
I have 32-bit Windows 7 and Excel 2013/2010/2007/2003/2002 (I know!) but the issue only started after installing 2013. I also get the "cannot complete this task" message regularly when working in Excel (generally with Power Pivot or something legitimately
memory-hungry though), and restarting the application does the trick. I don't mind a heads-up when I'm gobbling up too many resources, but when Excel's not even open, it's a bit ridiculous. It's like I have a zombie Excel! Does interacting with Excel files
via upload/moving around Windows Explorer actually trigger some sort of Excel action in the background?
Any ideas would be most appreciated!! Thank you :)

Hi,
As the memory error messages , it can be very generic and don't always identify the real cause of the issue. We may try to use the KB that Mr. KR mentioned above to troubleshoot it.
On the other hand, if the file is xls format, we may convert to the new file format .XLSM and test.
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28339883.html
Next, try to disable hardware graphics acceleration from File > Options > Advanced > Display section and disable Aero Themes (if you enabled) to check the results.
For the hangs and crashes issues, we may use ADPlus.vbs to troubleshoot:
http://support.microsoft.com/kb/286350/en-us
http://www.networksteve.com/exchange/topic.php/Excel_cannot_complete_this_task_with_available_resources_error,/?TopicId=39411&Posts=1
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it's helpful.
George Zhao
TechNet Community Support

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Can't get Run Time Prompts to pop up in Planning 11.1.2.1 on WebForm

Hi,
Client is using Business Rules and not Calc Manager. I have a Webform that has a Business Rule attached with only Run on Save selected. In the BR there are various RTP's user needs to choose. When I navigate to the WebForm in the bottom left hand corner I don't see any available BR's. That is first clue it won't work? When I hit save, nothing pops up to select and only the message 'The data has been saved successfully' appears. Nothing about the rule has run successfully etc. I have provisioned the group I'm in with 'Validate or Launch' Access to the BR in question.
Within EAS when I goto launch or validate the rule, the Run Time Prompt box pops up and allows me to make my selections but not when I hit Save on the form.
Any ideas? Could it be a provisioning issue? My username is an admin.
Stumped as I haven't done this in a while without Calc Mgr thus am I missing something obvious?

OK. Possibly onto something here. On the left hand side of the Business Rule tab there are all the calc scripts. Then only Bus Rule that appears there is a new one I created that was an exact copy of the Business Rule in question, just with a '- New' appended to the end of the name. Funny thing is both Business rules that are attached to the form do appear on the right hand side. Thus how could that be? How does one get the Bus Rules to appear on the left hand side? Haven't been in EAS Business Rules mode for a long time.

HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
If i backspace everything and start typing again in the same area, it will work properly the second time.
I am using a ~7 month old macbook air with mavericks.
Any tips to get rid of this issue would be greatly appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Run Time Prompt - showing alias instead of member name

We have a Capex Planning application that uses right-click menus to launch business rules with Run Time Prompts. We are using Planning 11.1.2.1. Even we the alias table set, when opening the RTP it pulls in the member name rather than alias.
There is an Oracle KB article (Show the Alias name in the Business Rule Run-Time Prompt [ID 857832.1]) that has this solution:
Take the following steps to add the alias name to the run-time prompt along with the member name.
1. Log in to planning web.
2. Navigated to File >> Preferences >> Application settings.
3. Select Show Alias in Member Selection and change the option from no to yes.
4. Save it.
But in 11.1.2.1, there is not option for "Show Alias in Member Selection" under Planning Preferences.
We have an SR open, but figured maybe someone else has run into this issue as well.
Does anyone know how to get the aliases to show on a Run Time Prompt rule in 11.1.2.1?
Thanks for your help!!

Deleting and rebuilding the dimension in the outline will enable you to build the members in the order you may desire if the file is in a given order.

Run time prompts not appearing when launching BR from a right click menu

Similar Messages

Maybe you are looking for