"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application

"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application. what should i do? help me.. =(
hopefully i can running my photoshop cs4 on Rosetta coz some plugin need rosetta to work. thanks..

xvolution_lp wrote:
macbook aluminium unibody mac snow leopard 10.6.4. i've already installed rosetta in my mac. i think this problem happen caused other software (CleanmyMac) . i've run the app and i think the app(cleanmymac) remove the universal binaries. what shoul i do?…
I'll assume that's a Mac-Intel machine, as I'm not familiar with macbooks or laptops in general. Obviously, if it were a PPC you would not need Rosetta in the first place.
Well, here's what I would do:
I'd re-install CS4 in the hopes that will solve the problem;
Second, I'd stop listening (and probably even speaking) to the misguided soul who recommended CleanmyMac to me;
Third, delete all traces of CleanmyMac; and
Fourth, I'd reinstall the OS and all applications on my machine.
But that's just me.
Wo Tai Lao Le
我太老了

Similar Messages

I need to open FireFox 12.0 (on Mac Lion) in 32-bit mode. That option to restart in 32-bit doesn't exist under "Get Info" or anywhere. Your help please, Thanks!

The option to start in 32-bit mode is available in Safari. But Firefox 12.0 doesn't seem to even have it. Is it possible to upload an earlier version of Firefox? I need to be able to do this, the inability is actually interfering with work that I do to earn my living, so time is of the essence. Thanks for any help/guidance the community can offer.

Thank you, but that option doesn't seem to exist. I have attached a screen shot of the Get Info window, and I have been unable to locate the "Restart in 32-bit" option on it. It used to be right above the "locked" checkbox.

HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

The Cube with ID = Rate doesn't exist in the collection Error Message

When doing a Full Optimization in the Rate cube I get a "The Cube with ID = Rate doesn't exist in the collection" error message. What is causing this error and how do I fix it?

I have seen this error when reporting services was not properly configured. can you connect to http://servername/reports ?
If not try to fix reporting services first, this solved the problem for me in the past.
But usually in this case all the aplications are giving this error when modifying. Is this also the case in your appset?
Does Apshell work when you modify the application there?
-Joost

The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.

Hi,
When I am importing csv file system is showing me the following error:
[Admin-ProcessPartition]The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.
I checked my OLAP database. Partition with id = FAC2CRDN exists.
Please help me to come our from this issue and Thanks.
Regards,
Stanislav

I would suggest you the following steps in order to see if your problem is fixed or if you still have some errors:
1) full optimize your application
2) try to full process the OLAP database directly from the Analysis Services management console.
Regards,
Simmaco

Running with -verbosegc Option.

Hi ,
Can any one explain each term, what does the following output means [while running with the option -verbosegc]
java -verbosegc test
[GC 510K->181K(1984K), 0.0066506 secs]
[GC 693K->342K(1984K), 0.0057084 secs]
[GC 854K->489K(1984K), 0.0109063 secs]
[GC 998K->581K(1984K), 0.0090856 secs]
[GC 1093K->602K(1984K), 0.0073623 secs]
[GC 1114K->738K(1984K), 0.0047804 secs]
[GC 1249K->1063K(1984K), 0.0099846 secs]
[GC 1562K->1528K(2112K), 0.0093059 secs]
[Full GC 1528K->1506K(2112K), 0.1076427 secs]
[GC 2015K->1998K(3088K), 0.0055318 secs]
[GC 2487K->2470K(3088K), 0.0060814 secs]
[GC 2981K->2963K(3600K), 0.0060281 secs]
[Full GC 2963K->2963K(3600K), 0.1152215 secs]
[GC 3632K->3615K(5516K), 0.0053477 secs]
[GC 4125K->4119K(5516K), 0.0052388 secs]
[GC 4619K->4596K(5516K), 0.0063873 secs]
[GC 5107K->5087K(5644K), 0.0086590 secs]
[Full GC 5087K->5087K(5644K), 0.1233247 secs]
[GC 5706K->5680K(9152K), 0.0545960 secs]
[GC 6313K->6158K(9152K), 0.0090305 secs]
[GC 6798K->6367K(9152K), 0.0113269 secs]
[GC 7007K->6397K(9152K), 0.0043400 secs]
[GC 7037K->6427K(9152K), 0.0022167 secs]
[GC 7131K->6588K(9152K), 0.0072012 secs]
[GC 7207K->7128K(9152K), 0.0101116 secs]
[GC 7752K->7725K(9152K), 0.0083363 secs]
[GC 8351K->8328K(9152K), 0.0073818 secs]
[GC 8964K->8940K(9664K), 0.0076883 secs]
[Full GC 8940K->4632K(9664K), 0.1903230 secs]
[GC 5269K->5257K(9152K), 0.0057223 secs]
[GC 5890K->5876K(9152K), 0.0179900 secs]
[GC 6506K->6481K(9152K), 0.0070621 secs]
[GC 7116K->7087K(9152K), 0.0076863 secs]
[GC 7727K->7668K(9152K), 0.0248874 secs]
[GC 8281K->8135K(9152K), 0.0103799 secs]
[GC 8756K->8722K(9408K), 0.0075765 secs]
[Full GC 8722K->3251K(9408K), 0.3584338 secs]
[GC 3867K->3847K(9152K), 0.0058058 secs]
[GC 4484K->4461K(9152K), 0.0074072 secs]
[GC 5096K->5083K(9152K), 0.0066087 secs]
[GC 5720K->5707K(9152K), 0.0060539 secs]
[GC 6331K->6304K(9152K), 0.0073750 secs]
[GC 6935K->6907K(9152K), 0.0081022 secs]
[GC 7523K->7496K(9152K), 0.0074461 secs]
Regards
SAM

This is a quote from the following article: http://java.sun.com/docs/hotspot/gc/index.html
The command line argument -verbose:gc prints information at every collection. For example, here is output from a large server application:
[GC 325407K->83000K(776768K), 0.2300771 secs]
[GC 325816K->83372K(776768K), 0.2454258 secs]
[Full GC 267628K->83769K(776768K), 1.8479984 secs]
Here we see two minor collections and one major one. The numbers before and after the arrow indicate the combined size of live objects before and after the GC. (After minor collections the count includes objects that aren't necessarily alive but can't be reclaimed, either because they are directly alive, or because they are within or referenced from the old generation.) The number in parenthesis is the total available space, which is the total heap minus one of the survivor spaces.

Web Service Data Control option doesn't exist in JDeveloper

I have tried to find similar question but have not;
I am using JDeveloper 10.1.2.1 - after selecting Business Tier from a New Gallery dialog box, and then selecting Web Services, I am expecting to see the option "Web Service Data Control" but it doesn't exist. The only 2 options I see are "SOAP Server Connection" and "UDDI Registry Connection". Any ideas why I am not seeing this option. I tried installing the 11.1.2.1 JDeveloper but I see the same choices there too. Any guidance or ideas would be very much appreciated.

Thanks for the quick response. That was way to easy - I just didn't see that option. Thank you very much for pointing it out.
FYI - This worked on the 11.1.2.1 install but not on the ver10 install. As long as it works on one of them I am off and running. Thanks again.

No "Open with Rosetta" option for Dreamweaver 2004 MX

I have a new Intel Mini 1.66 Core Duo with 2 GB RAM and I cannot start up Dreamweaver 2004 MX 7.0.1 I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
The program DW 2004 works fine on my PowerBook G4.
Any ideas? The program did not want to install in the Intel mini, so I had to copy the install file (*.sea) over top of stuffit to get it to install.
Please help.
Thanks

I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
This option will only appear when an application's kind is reported as being Application (Universal) and you are using an Intel Mac, as this is the only configuration which gives you the option to choose between architectures, and the checkbox only appears when running both architectures is possible with a given application on your model of Mac. If you are using a PowerPC-only application on an Intel Mac or a PowerPC or Universal application on a PowerPC Mac, only the PowerPC code can be executed, and the Open with Rosetta checkbox will not appear.
(14790)

How can I sign out from old icloud email on my device? I changed email recently and by mistake restored my new iphone 6 from old back up with email that doesn't exist. Pls help!

I have changed i cloud email recently, and wanted to set up my new iphone 6 from 2 months old back up. Later I found out that icloud has old email, but it doesn't recognize password to sign out because it is not in i cloud system anymore. Now I cant turn off stupid icloud to reset my new iphone 6
How can I change icloud email or reset and erase new phone 6 if it is stuck on an old apple id which doesnt exist?

The fact that the email address doesn't exist anymore doesn't matter. As far as the Apple ID is concerned, the email address is just a user name. As long as you know the password you used, it should be fine.
If you don't remember the password, start here:
https://iforgot.apple.com

Standard Text with ' include' option doesn't work with order created by FM

Hi ABAPers,
Standard text with 'Include' Option does not work with all the Order created via the Function Module SD_ORDER_CREATE_WWW. Where as Order created via VA01 display the Standard text with 'Include'.
On my analysis I found that, Order created via FM use the '*' 'Comment' instead of ':/' 'Command' in the script editor. So the Standard text inserted was considered as a Text instead of command.
Hence issuing print or print preview, the Script display the INCLUDE statement instead of the text.
Can you please let me know the reason and the way to rectify it.
Thanks & Regards
N.Suresh Kumar

Hi.
Make that * command as /: and try in ur program..
It works..
Hope it helps...
Cheers,
Simha.

Download More Sounds Option Doesn't Exist

I'm currently on OS X Yosemite with Garageband 10.0.3. I downloaded the Garageband app for free and saw I can download more instruments with an in-app purchase however the option to do this does not exist. In the Garageband menu it lists About Garageband, Preferences and then Restore Sound Library completely skipping over the download more sounds option.
Can someone explain to me why this option isn't there and how I can download more sounds/instruments?

Restore Purchase is shown, if you previously bought the in-app purchase or owned GarageBand '11, that had more sounds than the basic GarageBand 10.0. Then this option will download the additional sounds without additional purchase.
Just try "Restore Sound Library" and be prepared for a gigantic 10GB download. You can quit GarageBAnd anytime, and the download will resume.

Error message in WebGUI after adding fields with EEWB - Class doesn't exist

Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
Marek

Hello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek

Program not running with -cp option from command line

I'm trying to run a very basic emailing program in Linux (Fedora 5) using Sun's j2sdk1.4.2_16.
I can run the program no problem from the command line using
"java RunEmailer"
but if I try both:
"java -cp /usr/lmt-programs/mail_send/RunEmailer"
or
"[JAVA_HOME]/java -cp /usr/lmt-programs/mail_send/RunEmailer"
I keep getting the help print out about options when running java.
I need the -cp option to work as I need to run this program from crontab.
Thanks in advance.

uberalles wrote:
"java -cp /usr/lmt-programs/mail_send/RunEmailer"Here you specify the classpath (the directory /usr/lmt-programs/mail_send/RunEmailer) but you don't specify the class that is to be run. If the class you want to run is named RunEmailer and it's in the directory /user/lmt-programs/mail_send then you want this command:
"java -cp /usr/lmt-programs/mail_send RunEmailer"

HT2534 Creating apple ID without credit card.. ''NONE'' option doesn't exist. Help!!

I don't use credit cards.. this doesn't mean I can't use iphone... APPLE.. plz help otherwise ur device is no more than a cheap talk/sms only phone..

I've just tried it and the 'none' option appears when creating a new account :
Did you follow the instructions on that page exactly e.g. you selected a free app in the store and clicked on 'create Apple id' when 'buying' it ?
And these are user-to-user forums, you are not talking to Apple here.

All my Pro Apps only run with Rosetta

All pro apps wont run in my Intel Mac unless I change "open using Rosseta¨in the info panels. I have FCP version 5.1.2/DVD Studio Pro 4.1.0
I am breaking my head for days, please help.
Thanks
Adrian
iMac Pentium Mac OS X (10.4.8) 1gig Ram

When I try to open the apps, it only atempts to load, only one jump in the Dock.I have tried cleaning old apps and any posible settings I know, reinstaling; verify and repair permissions and nothing.
I don't find a crash log for Final Cut, but I get a this for DVD studo Pro, Live Type, and Soundtrack. Expet or the apps name , they all show the same error.
Thanks a million Phillipe...
setting, Host Name: Fam8a-iMac
Date/Time: 2006-10-21 06:34:57.347 -0600
OS Version: 10.4.8 (Build 8L2127)
Report Version: 4
Command: DVD Studio Pro
Path: /Applications/Audio:Video/DVD Studio Pro.app/Contents/MacOS/DVD Studio Pro
Parent: WindowServer [85]
Version: 4.1.0 (431)
PID: 376
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Audio:Video/DVD Studio Pro.app/Contents/MacOS/DVD Studio Pro
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit: mach-o, but wrong architecture

"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application

Similar Messages

Maybe you are looking for