Runcluvfy.sh result: Check for ASMLib configuration failed
I'm trying upgrade 11.1.0.7.0 to 11.2.0.3.0 on linux.
runcluvfy.sh gives result as this:
==================================================================
Checking ASMLib configuration.
Node Name Status
node1 (failed) ASMLib configuration is incorrect.
node2 (failed) ASMLib configuration is incorrect.
Result: Check for ASMLib configuration failed.
===================================================================
here are some asm related:
==========================
/etc/init.d/oracleasm listdisks
DISK02
/usr/sbin/oracleasm configure
ORACLEASM_ENABLED=true
ORACLEASM_UID=oracle
ORACLEASM_GID=oinstall
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
/etc/init.d/oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yes
Current two nodes RAC,ASM work fine.
Can some one give hint what I should check about asm?
Thanks
ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 286460
Used space (kbytes) : 3908
Available space (kbytes) : 282552
ID : 1116406961
Device/File Name : /dev/ocr3
Device/File integrity check succeeded
Device/File Name : /dev/ocr2
Device/File integrity check succeeded
Cluster registry integrity check succeeded
Logical corruption check bypassed due to non-privileged user
crsctl query css votedisk
0. 0 /dev/vote3
1. 0 /dev/vote2
2. 0 /dev/vote1
Located 3 voting disk(s).
ls -l /dev/oracleasm/disks
total 0
brw-rw---- 1 oracle oinstall 8, 145 Feb 24 13:17 DISK02
/etc/init.d/oracleasm querydisk -d DISK02
Disk "DISK02" is a valid ASM disk on device /dev/sdj1[8,145]
thanks
Similar Messages
-
DB installs fails with [INS-30060] Check for group existence failed
Hi folks
as user jjayet I'm running on OEL 5.6 64 bits the following command to install DB 11gR2 :
$ /mntmats/SOAVM0504/AUTO_WORK/dbzip_shiphome/database/Disk1/runInstaller -ignoreSysPrereqs -invPtrLoc /ade/jjayet_dte9672/oracle/work/DATABASE1/oraInst.loc -force -silent -waitforcompletion -responseFile /ade/jjayet_dte9672/oracle/work/DATABASE1/db.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15258 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16454 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_06-07-54AM. Please wait ...[FATAL] [INS-30060] Check for group existence failed.
CAUSE: Unexpected error occurred while trying to check for group existence.
$ id
uid=511053(jjayet) gid=8500(dba) groups=8500(dba),59031(oinstall)
the problems seems relater to accessing /tmp
as the local disk is not enough to use the default /tmp (the DB install will fail with full disk error as the local disk space is very low )
I've created a partition from new disk to /tmp which I have then mounted (default is nfs3) :
# mount /dev/xvdc1 /tmp
# mount
/dev/xvdc1 on /tmp type ext2 (rw)
the result of DB install into /tmp is :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-xr-x 2 jjayet dba 4096 Apr 5 06:36 CVU_11.2.0.2.0_jjayet
drwxrwxrwx 7 root root 4096 Apr 5 06:36 .
if I umount /tmp but use the local /tmp
re-running the DB installer as user jjayet it does not raise the error above
and now local /tmp contains :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-x--- 10 jjayet dba 4096 Apr 5 06:25 OraInstall2012-04-05_06-25-28AM
drwxr-xr-x 3 jjayet dba 4096 Apr 5 06:25 CVU_11.2.0.2.0_jjayet
drwxrwxrwt 5 root root 4096 Apr 5 06:25 .
do you know how to use tmp over nfs with user jjayet so that the DB can install properly ?
it seems that the files created as user jjayet into mounted /tmp are not identified properly
thks in advance
jeanthks for the pointer
I found the post you mention but it does not help
it does not explain the root cause of the problem but just propose a workaround to pass an option to installer which will popi\up an interactive messgae at install time
as installation is done automatically through ADE / DTE I cannot use this workaround
any expert in oracle DB install can help ?
thks
Jean -
I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?
update manually,: http://www.adobe.com/downloads/updates/
-
Check for Preview Builds failing with error 0x080240438
Checking for Preview Builds on my two machines, one running 9860 and one running 9879, is failing with "Failed to check for new preview build, please try again later. 0x80240438.
Tried stopping Windows Update Service and clearing down the c:\Windows\SoftwareDistribution cache but to no avail. Windows Update (check for updates rather than check for preview builds) working fine.
As ever would be nice to hear from MS on this.Hi,
This seems to be the issue with the server side and should be fixed already.
Check the fred andrews's reply in this thread:
Error Code 0x80240438
Quoted:
fred andrews replied on November 16, 2014
I was just on the phone with Microsoft support they told me that the servers are down and they are working on it. I was told they should be up by tomorrow morning approx.. 4 hrs.
Best regards
Michael Shao
TechNet Community Support -
Check for used DCs failed:Cannot build because used component is broken
Hi All,
when i Build the DC after creation public part getting the below error,
Jun 30, 2008 4:06:41 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: eprtest: Build failed for chdp.com/eprtest(MyComponents) in variant "default": Cannot build because used component is broken: chdp.com/labourmanagement( MyComponents)
please help me.
Thanks,
RameshBabu.VHi rameshbabu,
Check for the dc chdp.com/labourmanagement , which u r using as dependency for ur dc . That dc is not built properly. Rectify the problem in chdp.com/labourmanagement & then rebuild ur dc, which is using that dc as used dc.It will work properly.
regards
Sumit -
[SOLVED] Check for old configuration files and directories in ~/
Hello,
Since I started with Arch I tried and uninstalled a few programs and would like to check for possible left overs in ~/
I tried the "lostfiles" script, but it does not seem to check the home directory. Then I followed this: https://wiki.archlinux.org/index.php/Pa … ny_package - But using the suggested alias in my bash, it gives me the below:
$ pacman-disowned-files
[sudo] password for [my user]:
bash: -path: command not found
bash: /root: Is a directory
bash: -print: command not found
What am I doing wrong?
Regards
Martin
Last edited by onslow77 (2015-02-04 23:52:44)Hello,
ohh, I see, I need to do this (in directory where I put the script)
sh pacman-disowned -files > test.txt
That solved the usage of the commands, but it does not however list files [in the test.txt file] that do not belong to any package in my ~/ directory (I put a dummy file in my ~/ to see if it got noticed) - but it did not. So how can I list files and directories in my ~/ directory that is not put there by any package that currently is installed?
Regards
Martin
Last edited by onslow77 (2015-02-04 22:49:11) -
SCM 3.0 Check For Updates continously fail
Is anyone experiencing Auto Download failures with SCM 3.0 ??
I keep getting the operation was aborted. The operation timed out. No issues going through the Proxy from the SCM box to other sites. Manual download works fine
Message location within the error generated by SCM Auto Download
t System.Net.HttpWebRequest.GetResponse()
at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials, IWebProxy proxy, RequestCachePolicy cachePolicy)
at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)
at System.Xml.XmlTextReaderImpl.OpenUrlDelegate(Object xmlResolver)
at System.Threading.CompressedStack.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.CompressedStack.Run(CompressedStack compressedStack, ContextCallback callback, Object state)
at System.Xml.XmlTextReaderImpl.OpenUrl()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace)
at System.Xml.XmlDocument.Load(XmlReader reader)
at System.Xml.XmlDocument.Load(String filename)
at Microsoft.SecurityComplianceManager.UI.DownloadBaselineList.LoadData(Boolean showDialogIfNotFound)
Wireshark capture shows the URL where the index for the downloads reside. The URL includes download.microsoft.comhttp://
Full request URI: http://download.microsoft.comhttp://download.microsoft.com/download/A/D/E/ADE1F0AA-8D6C-4DAB-9C87-6A06B04B6925/RssFeed_BaselineUpdateV3dot0.xml
Greatly appreciate any assistanceSee [[Installing Firefox on Linux]]
-
Z61t - Integrity check for code area failed system halted
Saw the post for the T series which recommended to downgrade bios to 2.23.
Having this issue with the Z61ts since January 4, 2010.
-Docked and undocked
-With and without the network cable plugged in
-With and without peripherals plugged in
-Bios 2.26 and 2.27,
-SafeGuard Easy 4.3 and 4.5.2.
In some cases restoring the SafeguardEasy Kernel fixes the issue. In some cases the error reappears and either the kernel needs to be restored again, or the PC can just be rebooted. One case had 2 kernel restores, a reimage and a kernel restore.^ Same problem here.
How long it takes to create new fixed Bios-software.?
Moderator edit: Thinly disguised profanity removed. Please stick to the Community Rules. -
Failed preliminary checks for Oracle Real Application Cluster 12C.
Hi, all. Please, help to investigate and solve. Thanks.
[grid@orac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n orac1,orac2 -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "orac1"
Destination Node Reachable?
orac1 yes
orac2 yes
Result: Node reachability check passed from node "orac1"
Checking user equivalence...
Check: User equivalence for user "grid"
Node Name Status
orac2 passed
orac1 passed
Result: User equivalence check passed for user "grid"
Checking node connectivity...
Checking hosts config file...
Node Name Status
orac1 passed
orac2 passed
Verification of the hosts config file successful
Interface information for node "orac1"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500
eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5B:D7:29 1500
Interface information for node "orac2"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500
eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9D:27:D8 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500
Check: Node connectivity of subnet "10.154.137.0"
Source Destination Connected?
orac1[10.154.137.101] orac2[10.154.137.102] yes
Result: Node connectivity passed for subnet "10.154.137.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.154.137.0"
Source Destination Connected?
orac1:10.154.137.101 orac2:10.154.137.102 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.154.137.101" and "orac2 : 10.154.137.102" failed
Result: TCP connectivity check failed for subnet "10.154.137.0"
Check: Node connectivity of subnet "10.154.138.0"
Source Destination Connected?
orac1[10.154.138.101] orac2[10.154.138.102] yes
Result: Node connectivity passed for subnet "10.154.138.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.154.138.0"
Source Destination Connected?
orac1:10.154.138.101 orac2:10.154.138.102 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.154.138.101" and "orac2 : 10.154.138.102" failed
Result: TCP connectivity check failed for subnet "10.154.138.0"
Check: Node connectivity of subnet "10.0.4.0"
Source Destination Connected?
orac1[10.0.4.15] orac2[10.0.4.15] yes
Result: Node connectivity passed for subnet "10.0.4.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.0.4.0"
Source Destination Connected?
orac1:10.0.4.15 orac2:10.0.4.15 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.0.4.15" and "orac2 : 10.0.4.15" failed
Result: TCP connectivity check failed for subnet "10.0.4.0"
Interfaces found on subnet "10.0.4.0" that are likely candidates for VIP are:
orac1 eth2:10.0.4.15
orac2 eth2:10.0.4.15
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "10.154.137.0".
Subnet mask consistency check passed for subnet "10.154.138.0".
Subnet mask consistency check passed for subnet "10.0.4.0".
Subnet mask consistency check passed.
ERROR:
PRVG-1172 : The IP address "10.0.4.15" is on multiple interfaces "eth2,eth2" on nodes "orac2,orac1"
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "10.154.137.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.154.137.101" on node "orac1" is not able to communicate with interface "10.154.137.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.101" on node "orac1" is not able to communicate with interface "10.154.137.102" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.102" on node "orac2" is not able to communicate with interface "10.154.137.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.102" on node "orac2" is not able to communicate with interface "10.154.137.102" on node "orac2" over multicast group "224.0.0.251"
Checking subnet "10.154.138.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.154.138.101" on node "orac1" is not able to communicate with interface "10.154.138.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.101" on node "orac1" is not able to communicate with interface "10.154.138.102" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.102" on node "orac2" is not able to communicate with interface "10.154.138.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.102" on node "orac2" is not able to communicate with interface "10.154.138.102" on node "orac2" over multicast group "224.0.0.251"
Checking subnet "10.0.4.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.0.4.15" on node "orac1" is not able to communicate with interface "10.0.4.15" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac1" is not able to communicate with interface "10.0.4.15" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac2" is not able to communicate with interface "10.0.4.15" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac2" is not able to communicate with interface "10.0.4.15" on node "orac2" over multicast group "224.0.0.251"
Checking ASMLib configuration.
Node Name Status
orac1 passed
orac2 passed
Result: Check for ASMLib configuration passed.
Check: Total memory
Node Name Available Required Status
orac2 5.714GB (5991520.0KB) 4GB (4194304.0KB) passed
orac1 5.714GB (5991520.0KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Status
orac2 5.2293GB (5483324.0KB) 50MB (51200.0KB) passed
orac1 5.1456GB (5395600.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Status
orac2 6.125GB (6422520.0KB) 5.714GB (5991520.0KB) passed
orac1 6.125GB (6422520.0KB) 5.714GB (5991520.0KB) passed
Result: Swap space check passed
Check: Free disk space for "orac2:/usr,orac2:/var,orac2:/etc,orac2:/sbin,orac2:/tmp"
Path Node Name Mount point Available Required Status
/usr orac2 / 37.8398GB 1.0635GB passed
/var orac2 / 37.8398GB 1.0635GB passed
/etc orac2 / 37.8398GB 1.0635GB passed
/sbin orac2 / 37.8398GB 1.0635GB passed
/tmp orac2 / 37.8398GB 1.0635GB passed
Result: Free disk space check passed for "orac2:/usr,orac2:/var,orac2:/etc,orac2:/sbin,orac2:/tmp"
Check: Free disk space for "orac1:/usr,orac1:/var,orac1:/etc,orac1:/sbin,orac1:/tmp"
Path Node Name Mount point Available Required Status
/usr orac1 / 32.4382GB 1.0635GB passed
/var orac1 / 32.4382GB 1.0635GB passed
/etc orac1 / 32.4382GB 1.0635GB passed
/sbin orac1 / 32.4382GB 1.0635GB passed
/tmp orac1 / 32.4382GB 1.0635GB passed
Result: Free disk space check passed for "orac1:/usr,orac1:/var,orac1:/etc,orac1:/sbin,orac1:/tmp"
Check: User existence for "grid"
Node Name Status Comment
orac2 passed exists(1100)
orac1 passed exists(1100)
Checking for multiple users with UID value 1100
Result: Check for multiple users with UID value 1100 passed
Result: User existence check passed for "grid"
Check: Group existence for "oinstall"
Node Name Status Comment
orac2 passed exists
orac1 passed exists
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
orac2 passed exists
orac1 passed exists
Result: Group existence check passed for "dba"
Check: Membership of user "grid" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Status
orac2 yes yes yes yes passed
orac1 yes yes yes yes passed
Result: Membership check for user "grid" in group "oinstall" [as Primary] passed
Check: Membership of user "grid" in group "dba"
Node Name User Exists Group Exists User in Group Status
orac2 yes yes yes passed
orac1 yes yes yes passed
Result: Membership check for user "grid" in group "dba" passed
Check: Run level
Node Name run level Required Status
orac2 5 3,5 passed
orac1 5 3,5 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Status
orac2 hard 4096 65536 failed
orac1 hard 4096 65536 failed
Result: Hard limits check failed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Status
orac2 soft 1024 1024 passed
orac1 soft 4096 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Status
orac2 hard 46654 16384 passed
orac1 hard 46654 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Status
orac2 soft 1024 2047 failed
orac1 soft 1024 2047 failed
Result: Soft limits check failed for "maximum user processes"
Check: System architecture
Node Name Available Required Status
orac2 x86_64 x86_64 passed
orac1 x86_64 x86_64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Status
orac2 2.6.32-279.el6.x86_64 2.6.32 passed
orac1 2.6.32-279.el6.x86_64 2.6.32 passed
Result: Kernel version check passed
Check: Kernel parameter for "semmsl"
Node Name Current Configured Required Status Comment
orac1 250 250 250 passed
orac2 250 250 250 passed
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns"
Node Name Current Configured Required Status Comment
orac1 32000 32000 32000 passed
orac2 32000 32000 32000 passed
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm"
Node Name Current Configured Required Status Comment
orac1 100 100 100 passed
orac2 100 100 100 passed
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni"
Node Name Current Configured Required Status Comment
orac1 128 128 128 passed
orac2 128 128 128 passed
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax"
Node Name Current Configured Required Status Comment
orac1 4398046511104 4398046511104 3067658240 passed
orac2 4398046511104 4398046511104 3067658240 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Current Configured Required Status Comment
orac1 4096 4096 4096 passed
orac2 4096 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall"
Node Name Current Configured Required Status Comment
orac1 4294967296 4294967296 599152 passed
orac2 4294967296 4294967296 599152 passed
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max"
Node Name Current Configured Required Status Comment
orac1 6815744 6815744 6815744 passed
orac2 6815744 6815744 6815744 passed
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range"
Node Name Current Configured Required Status Comment
orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default"
Node Name Current Configured Required Status Comment
orac1 262144 262144 262144 passed
orac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max"
Node Name Current Configured Required Status Comment
orac1 4194304 4194304 4194304 passed
orac2 4194304 4194304 4194304 passed
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default"
Node Name Current Configured Required Status Comment
orac1 262144 262144 262144 passed
orac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "wmem_default"
Check: Kernel parameter for "wmem_max"
Node Name Current Configured Required Status Comment
orac1 1048576 1048576 1048576 passed
orac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr"
Node Name Current Configured Required Status Comment
orac1 1048576 1048576 1048576 passed
orac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "binutils"
Node Name Available Required Status
orac2 binutils-2.20.51.0.2-5.34.el6 binutils-2.20.51.0.2 passed
orac1 binutils-2.20.51.0.2-5.34.el6 binutils-2.20.51.0.2 passed
Result: Package existence check passed for "binutils"
Check: Package existence for "compat-libcap1"
Node Name Available Required Status
orac2 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
orac1 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
Result: Package existence check passed for "compat-libcap1"
Check: Package existence for "compat-libstdc++-33(x86_64)"
Node Name Available Required Status
orac2 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
orac1 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
Result: Package existence check passed for "compat-libstdc++-33(x86_64)"
Check: Package existence for "libgcc(x86_64)"
Node Name Available Required Status
orac2 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed
orac1 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed
Result: Package existence check passed for "libgcc(x86_64)"
Check: Package existence for "libstdc++(x86_64)"
Node Name Available Required Status
orac2 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed
orac1 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++(x86_64)"
Check: Package existence for "libstdc++-devel(x86_64)"
Node Name Available Required Status
orac2 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed
orac1 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++-devel(x86_64)"
Check: Package existence for "sysstat"
Node Name Available Required Status
orac2 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed
orac1 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed
Result: Package existence check passed for "sysstat"
Check: Package existence for "gcc"
Node Name Available Required Status
orac2 gcc-4.4.7-11.el6 gcc-4.4.4 passed
orac1 gcc-4.4.7-11.el6 gcc-4.4.4 passed
Result: Package existence check passed for "gcc"
Check: Package existence for "gcc-c++"
Node Name Available Required Status
orac2 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed
orac1 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed
Result: Package existence check passed for "gcc-c++"
Check: Package existence for "ksh"
Node Name Available Required Status
orac2 ksh-20120801-21.el6.1 ksh-... passed
orac1 ksh-20120801-21.el6.1 ksh-... passed
Result: Package existence check passed for "ksh"
Check: Package existence for "make"
Node Name Available Required Status
orac2 make-3.81-20.el6 make-3.81 passed
orac1 make-3.81-20.el6 make-3.81 passed
Result: Package existence check passed for "make"
Check: Package existence for "glibc(x86_64)"
Node Name Available Required Status
orac2 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed
orac1 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed
Result: Package existence check passed for "glibc(x86_64)"
Check: Package existence for "glibc-devel(x86_64)"
Node Name Available Required Status
orac2 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed
orac1 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed
Result: Package existence check passed for "glibc-devel(x86_64)"
Check: Package existence for "libaio(x86_64)"
Node Name Available Required Status
orac2 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
orac1 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio(x86_64)"
Check: Package existence for "libaio-devel(x86_64)"
Node Name Available Required Status
orac2 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
orac1 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio-devel(x86_64)"
Check: Package existence for "nfs-utils"
Node Name Available Required Status
orac2 nfs-utils-1.2.3-26.el6 nfs-utils-1.2.3-15 passed
orac1 nfs-utils-1.2.3-26.el6 nfs-utils-1.2.3-15 passed
Result: Package existence check passed for "nfs-utils"
Checking availability of ports "6200,6100" required for component "Oracle Notification Service (ONS)"
Node Name Port Number Protocol Available Status
orac2 6200 TCP yes successful
orac1 6200 TCP yes successful
orac2 6100 TCP yes successful
orac1 6100 TCP yes successful
Result: Port availability check passed for ports "6200,6100"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting check for consistency of primary group of root user
Node Name Status
orac2 passed
orac1 passed
Check for consistency of root user's primary group passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
orac2 yes
orac1 yes
Result: Liveness check passed for "ntpd"
Check for NTP daemon or service alive passed on all nodes
Checking whether NTP daemon or service is using UDP port 123 on all nodes
Check for NTP daemon or service using UDP port 123
Node Name Port Open?
orac2 yes
orac1 yes
NTP common Time Server Check started...
NTP Time Server "193.27.209.1" is common to all nodes on which the NTP daemon is running
NTP Time Server "194.29.130.252" is common to all nodes on which the NTP daemon is running
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Checking on nodes "[orac2, orac1]"...
Check: Clock time offset from NTP Time Server
Time Server: 193.27.209.1
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
orac2 -355.25 passed
orac1 -124.19 passed
Time Server "193.27.209.1" has time offsets that are within permissible limits for nodes "[orac2, orac1]".
Time Server: 194.29.130.252
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
orac2 -358.87 passed
orac1 -109.63 passed
Time Server "194.29.130.252" has time offsets that are within permissible limits for nodes "[orac2, orac1]".
Clock time offset check passed
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "grid" is not in "root" group
Node Name Status Comment
orac2 passed does not exist
orac1 passed does not exist
Result: User "grid" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
orac2 0022 0022 passed
orac1 0022 0022 passed
Result: Default user file creation mask check passed
Checking integrity of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
WARNING:
PRVF-5640 : Both search and domain entries are present in file "/etc/resolv.conf" on the following nodes: orac1,orac2
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
Checking file "/etc/resolv.conf" to make sure that only one domain entry is defined
More than one "domain" entry does not exist in any "/etc/resolv.conf" file
All nodes have same "domain" entry defined in file "/etc/resolv.conf"
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
More than one "search" entry does not exist in any "/etc/resolv.conf" file
All nodes have same "search" order defined in file "/etc/resolv.conf"
Checking DNS response time for an unreachable node
Node Name Status
orac1 passed
orac2 passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
Check for integrity of file "/etc/resolv.conf" passed
Check: Time zone consistency
Result: Time zone consistency check passed
Checking integrity of name service switch configuration file "/etc/nsswitch.conf" ...
Checking if "hosts" entry in file "/etc/nsswitch.conf" is consistent across nodes...
Checking file "/etc/nsswitch.conf" to make sure that only one "hosts" entry is defined
More than one "hosts" entry does not exist in any "/etc/nsswitch.conf" file
All nodes have same "hosts" entry defined in file "/etc/nsswitch.conf"
Check for integrity of name service switch configuration file "/etc/nsswitch.conf" passed
Checking daemon "avahi-daemon" is not configured and running
Check: Daemon "avahi-daemon" not configured
Node Name Configured Status
orac2 yes failed
orac1 yes failed
Daemon not configured check failed for process "avahi-daemon"
Check: Daemon "avahi-daemon" not running
Node Name Running? Status
orac2 yes failed
orac1 yes failed
Daemon not running check failed for process "avahi-daemon"Yes, i can.
Node1.
[grid@orac1 grid]$ ping 10.154.137.101
PING 10.154.137.101 (10.154.137.101) 56(84) bytes of data.
64 bytes from 10.154.137.101: icmp_seq=1 ttl=64 time=0.105 ms
64 bytes from 10.154.137.101: icmp_seq=2 ttl=64 time=0.089 ms
64 bytes from 10.154.137.101: icmp_seq=3 ttl=64 time=0.056 ms
64 bytes from 10.154.137.101: icmp_seq=4 ttl=64 time=0.086 ms
^C
--- 10.154.137.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3098ms
rtt min/avg/max/mdev = 0.056/0.084/0.105/0.017 ms
[grid@orac1 grid]$ ping 10.154.137.102
PING 10.154.137.102 (10.154.137.102) 56(84) bytes of data.
64 bytes from 10.154.137.102: icmp_seq=1 ttl=64 time=2.15 ms
64 bytes from 10.154.137.102: icmp_seq=2 ttl=64 time=0.497 ms
64 bytes from 10.154.137.102: icmp_seq=3 ttl=64 time=0.364 ms
^C
--- 10.154.137.102 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2495ms
rtt min/avg/max/mdev = 0.364/1.003/2.150/0.813 ms
[grid@orac1 grid]$ ping 10.154.138.101
PING 10.154.138.101 (10.154.138.101) 56(84) bytes of data.
64 bytes from 10.154.138.101: icmp_seq=1 ttl=64 time=0.059 ms
64 bytes from 10.154.138.101: icmp_seq=2 ttl=64 time=0.173 ms
64 bytes from 10.154.138.101: icmp_seq=3 ttl=64 time=0.046 ms
64 bytes from 10.154.138.101: icmp_seq=4 ttl=64 time=0.056 ms
^C
--- 10.154.138.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3205ms
rtt min/avg/max/mdev = 0.046/0.083/0.173/0.052 ms
[grid@orac1 grid]$ ping 10.154.138.102
PING 10.154.138.102 (10.154.138.102) 56(84) bytes of data.
64 bytes from 10.154.138.102: icmp_seq=1 ttl=64 time=1.80 ms
64 bytes from 10.154.138.102: icmp_seq=2 ttl=64 time=0.418 ms
64 bytes from 10.154.138.102: icmp_seq=3 ttl=64 time=0.899 ms
^C
--- 10.154.138.102 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2860ms
rtt min/avg/max/mdev = 0.418/1.041/1.808/0.577 ms
[grid@orac1 grid]$
Node2.
[grid@orac2 ~]$ ping 10.154.137.101
PING 10.154.137.101 (10.154.137.101) 56(84) bytes of data.
64 bytes from 10.154.137.101: icmp_seq=1 ttl=64 time=0.537 ms
64 bytes from 10.154.137.101: icmp_seq=2 ttl=64 time=1.79 ms
64 bytes from 10.154.137.101: icmp_seq=3 ttl=64 time=0.733 ms
^C
--- 10.154.137.101 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2774ms
rtt min/avg/max/mdev = 0.537/1.021/1.794/0.552 ms
[grid@orac2 ~]$ ping 10.154.137.102
PING 10.154.137.102 (10.154.137.102) 56(84) bytes of data.
64 bytes from 10.154.137.102: icmp_seq=1 ttl=64 time=0.043 ms
64 bytes from 10.154.137.102: icmp_seq=2 ttl=64 time=0.106 ms
64 bytes from 10.154.137.102: icmp_seq=3 ttl=64 time=0.039 ms
64 bytes from 10.154.137.102: icmp_seq=4 ttl=64 time=0.039 ms
^C
--- 10.154.137.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3282ms
rtt min/avg/max/mdev = 0.039/0.056/0.106/0.029 ms
[grid@orac2 ~]$ ping 10.154.138.101
PING 10.154.138.101 (10.154.138.101) 56(84) bytes of data.
64 bytes from 10.154.138.101: icmp_seq=1 ttl=64 time=0.718 ms
64 bytes from 10.154.138.101: icmp_seq=2 ttl=64 time=0.515 ms
64 bytes from 10.154.138.101: icmp_seq=3 ttl=64 time=0.504 ms
^C
--- 10.154.138.101 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2468ms
rtt min/avg/max/mdev = 0.504/0.579/0.718/0.098 ms
[grid@orac2 ~]$ ping 10.154.138.102
PING 10.154.138.102 (10.154.138.102) 56(84) bytes of data.
64 bytes from 10.154.138.102: icmp_seq=1 ttl=64 time=0.058 ms
64 bytes from 10.154.138.102: icmp_seq=2 ttl=64 time=0.087 ms
64 bytes from 10.154.138.102: icmp_seq=3 ttl=64 time=0.052 ms
64 bytes from 10.154.138.102: icmp_seq=4 ttl=64 time=0.090 ms
^C
--- 10.154.138.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3755ms
rtt min/avg/max/mdev = 0.052/0.071/0.090/0.019 ms
[grid@orac2 ~]$ -
Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64
Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
ManishStarted with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [ AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [ AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [ AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [ AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[ CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [ CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [ CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [ CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish -
Configure:3955: checking for C compiler default output file name
Hi,
I am trying to configure oracle bsd on AIX and got the below error,
# sh /ldap/db-4.6.21.NC/dist/configure
checking build system type... powerpc-ibm-aix5.3.0.0
checking host system type... powerpc-ibm-aix5.3.0.0
checking if building in the top-level or dist directories... no
checking if --disable-cryptography option specified... no
checking if --disable-hash option specified... no
checking if --disable-mutexsupport option specified... no
checking if --disable-queue option specified... no
checking if --disable-replication option specified... no
checking if --disable-statistics option specified... no
checking if --disable-verify option specified... no
checking if --enable-compat185 option specified... no
checking if --enable-cxx option specified... no
checking if --enable-debug option specified... no
checking if --enable-debug_rop option specified... no
checking if --enable-debug_wop option specified... no
checking if --enable-diagnostic option specified... no
checking if --enable-dump185 option specified... no
checking if --enable-java option specified... no
checking if --enable-mingw option specified... no
checking if --enable-fine_grained_lock_manager option specified... no
checking if --enable-o_direct option specified... no
checking if --enable-posixmutexes option specified... no
checking if --enable-pthread_api option specified... no
checking if --enable-rpc option specified... no
checking if --enable-smallbuild option specified... no
checking if --enable-tcl option specified... no
checking if --enable-test option specified... no
checking if --enable-uimutexes option specified... no
checking if --enable-umrw option specified... no
checking if --with-mutex=MUTEX option specified... no
checking if --with-tcl=DIR option specified... no
checking if --with-uniquename=NAME option specified... no
checking for chmod... chmod
checking for cp... cp
checking for ln... ln
checking for mkdir... mkdir
checking for rm... rm
checking for sh... /usr/bin/sh
checking for a BSD-compatible install... /ldap/db-4.6.21.NC/dist/install-sh -c
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
and in config.log,
configure:3955: checking for C compiler default output file name
configure:3982: xlc_r -O2 -D_THREAD_SAFE -Wl,-brtl conftest.c >&5
/ldap/db-4.6.21.NC/dist/configure[3983]: xlc_r: not found
configure:3985: $? = 127
configure:4023: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "Berkeley DB"
| #define PACKAGE_TARNAME "db-4.6.21"
| #define PACKAGE_VERSION "4.6.21"
| #define PACKAGE_STRING "Berkeley DB 4.6.21"
| #define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
| #define HAVE_UPGRADE_SUPPORT 1
| /* end confdefs.h. */
|
Is this beacase valid c compiler not existing?
# which cc
which: 0652-141 There is no cc in /usr/bin /etc /usr/sbin /usr/ucb /usr/bin/X11 /sbin /usr/java14/jre/bin /usr/java14/bin.
# ksh: which:: not found.
# which c
which: 0652-141 There is no c in /usr/bin /etc /usr/sbin /usr/ucb /usr/bin/X11 /sbin /usr/java14/jre/bin /usr/java14/bin.
Thanks,
Message was edited by:
GK JoeJoe,
I presume you are trying to build Oracle BDB and not bsd as you have mentioned.
Yes, the error message you are getting is for not having the CC compiler in your system or the path isn't set. Check in the /usr/vac/bin directory if you have one in your system. You might find both xlc and cc compiler there. Set this directory to your path so that 'configure' can see it.
Regards,
-Debsubhra -
Availability check for configurable material.
Hi,
We are implementing SAP ECC-6 & facing
issue during availability check for
configurable materials.
I'd like to take an example of
computer for better understanding.
Will consider Computer as super BOM and
following 2 as BOM:-
BOM-1. a)Monitor b) Cpu c)Key
Board d)Scroll Mouse e)With
Mouse Pad.
BOM_2. a)Monitor b) Cpu c)Key
Board d)Optical Mouse e)With
out Mouse Pad.
But Customer wants A)Monitor B)Cpu c)
Key Board D)Optical Mouse e) With
Mouse Pad.
In the above case System will not show
%age of Configurable materials
available & Vice-versa but rather it
creates requirement for computer and
it gives availability as the lead time
maintained in the Material Master of
the Super Bom.
Here the busines requirement is that
it should show %age of configurable
materials
available.
Plz find the attachment for your kind
reference.
Kindly guide me to sort out this issue.
Thanks & Regards,
ChandruDear Sir,
Thanks for the guidance/ reply . Still we have some doubts in this:
As per your instructions, I have created sales order and did the MRP run for the same.
I got the planned order, then I have checked the ATP in Planned order change view and got the following results.
No. of components checked: 641
Missing parts: 640
Overall confirmation date could not be determined
But where I can see the Percentage of Avaialble and percentage of to be produced.
Please guide me.
Thanking you
Regards
Chandru -
Failed to check for new preview build, please try again later. 0x80248014
Hi
I keep getting error such as "Failed to check for a new preview build, please try again later.0x80248014" and unable to update to a newer build version.
How do I download the latest version build?
Windows Updates?Hi,
To rename SoftwareDistribution folder, you can refer to the contents of th link below:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-to-fix-the-purchase-error-0x80248014-windows-8/27c65525-fa28-4048-b11d-b83e86a2dcbc
For your problem, I'd like to suggest you use Windows update troubleshoot tool for test to fix this problem:
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Windows Update
If failed, please post the detailed information of this tool diagnose results here.
After that, please upload your Windows update log file to your sharing space and post the link here.
C:\Windows\WindowsUpdate.log
Roger Lu
TechNet Community Support -
ATP Check(in SCM ) for a Configurable product during sales order creation.
HI Guru's,
our client is implementing GATP(SCM) and Variant Config(ECC 6.0)
when a Sales order is created for a Configurable Product of 20" width and 10" diameter, and with some other Characteristics, He wants the ATP check to be done for that particular product with specific width and diameter.
Is there any possible solution?
Plz let me know....
Thanks
jkHi
Assuming that you know how to configure Variant configuration in R/3, ATP check in R/3 I will list down the ATP set up and setup relevant to Variant Configuration in SCM.
APO side.
1.Check Definition of Characteristics and Class system:
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Basis Settings -> Define Class System (CDP or Classical Characteristics)
2. Check Mode ( use same requirements class used in R/3 mat master)
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Global Available-to-Promise (Global ATP Check) -> General Settings -> Maintain Check Mode
3. Create a check instruction with your check mode and AE(make to stock SD order) combination and set up the desired ATP check method in it.
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Global Available-to-Promise (Global ATP Check) -> General Settings -> Maintain Check Instructions
4. Check Control with your ATP group and AE business event.
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Global Available-to-Promise (Global ATP Check) -> Product Availability Check -> Maintain Check Control
5.Maintain suitable scheduling horizon in SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Global Settings -> Maintain Global Parameters and Defaults -> Planning Tab
5. Don't forget to CIF classes and charecteristics
6. Maintain check mode, ATP group, PP/DS horizon, planning procedure 3 in product master.
If you want to trigger production you have to maintain planning procedure 5 in product master and appropriate settings for MATP like configure check instructions, production type Mutli level ATP. you have to have valid BOM and Routings, CIF PDS for the material, maintain production version in material master, etc. That will be quite a complex scenario again.
This should give you proper results. Hope this helps.
regards
Mohan V R chunchu
Edited by: Mohan V R Chunchu on Jan 30, 2008 6:17 AM -
Variant configuration u2013 availability check for Configurable material
Hi Guys,
We are doing the variant configuration scenario for one of our client. We are using planning strategy as 25 (sales order with variant configuration).
When we configure the Configurable material at sales order level, we wanted to check the availability check of Configurable for the combination of selected characteristics.
How we can configure it in the system.
Regards,
ShailendraHi,
availability check will work as per the checking group you had defined in system.
additionaly you need to put tick in configuration profile for availability check.
checking for material varient is optional, if your bussiness has materail varients you can activate type matching and while configuring the sales order if the values of charactersticks matches system will suggest you the the appropiate varient and you can replace your configurable material in sales order with it.
hope it will help you.
If you need some more information please explain what exactly your are expecting from system during availability check.
Regards
Ritesh
Edited by: R S D on May 28, 2009 7:29 AM
Maybe you are looking for
-
CF8 Flex SDK Version and Update
I'm new to Flex so this is probably a basic question. When creating a new Flex project I have an option, under the Flex SDK version (properties of the particular project) to select either a specific SDK or the server's SDK. Now I have CF8 installed a
-
Unauthorised payment despite auto re-charge being ...
Despite deactivating my auto-recharge almost a year ago, today Skype have taken a payment. Although their "customer services" (ha-ha-ha) website tells me lots of nice things, there seems to be actually be NOTHING I can do to claim this money back. Ca
-
JSP & Crystal Reports Database Problem
Hi all, I hava problem with refreshing the crystal report web viewer if the report retrieves data from DB. If I don't refresh the report, it shows the report with default parameters. But when I refresh the report (I mean viewer.refresh()) it gives an
-
Nokia 5800 Updated Firmware - Problems with Alarms
I have just updated to Custom Version 40.0.005.C01.01 and have a similar problem to other owners. When my phone is locked and a reminder comes on, linked to the Calendar, I have no way of Stopping the alarm. I have tried removing the battery, as sugg
-
How to mainain the document status
Hai experts, How to mainain the document status, Based on DUEDATE and Farworded to TARGET document in USER DEFINED Forms Regards Trinadh Kumar T