Rundll32.exe has stopped responding

When I install Ghost v14 on the T500, after reboot the DVD drive has a yellow exclamation mark on it with "the device is not responding properly" and an error pops up with "rundll32.exe has stopped responding", and also the power Manager icon on the task bar stops showing.
I can correct the problem with the DVD drive by removing an entry in the registry but the rundll32.exe error will never go away.
When I uninstall Ghost, all works fine, and then the error goes away, odd!
Has a anyone experienced this with Ghost and know why it causes these problems, with the DVD drive, Power Manager and the rundll.exe error?
Log Name:      Application
Source:        Application Error
Date:          17/01/2009 22:33:25
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      208252G
Description:
Faulting application rundll32.exe, version 6.0.6000.16386, time stamp 0x4549bb52, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791adec, exception code 0xc015000f, fault offset 0x00000000000603f1, process id 0x1c0, application start time 0x01c978f39520fc13.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-01-17T22:33:25.000Z" />
    <EventRecordID>4097</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ST-208252GAEM4T</Computer>
    <Security />
</System>
<EventData>
    <Data>rundll32.exe</Data>
    <Data>6.0.6000.16386</Data>
    <Data>4549bb52</Data>
    <Data>ntdll.dll</Data>
    <Data>6.0.6001.18000</Data>
    <Data>4791adec</Data>
    <Data>c015000f</Data>
    <Data>00000000000603f1</Data>
    <Data>1c0</Data>
    <Data>01c978f39520fc13</Data>
</EventData>
</Event>
Any help would be greatly appreciated.
Thanks
S
Message Edited by styoda on 01-18-2009 03:29 AM
Message Edited by styoda on 01-18-2009 03:30 AM

Anyone installed Ghost v14 on their T500?

Similar Messages

ATH.exe has stopped responding

I have uninstalled and reinstalled iTunes several times by following the instructions @ http://support.apple.com/kb/HT1923
This is a frequent occurance when syncing my iPhone.
Problem signature:
Problem Event Name: APPCRASH
Application Name: ATH.exe
Application Version: 17.282.0.1
Application Timestamp: 4fb5bca5
Fault Module Name: SSLEAY32.dll
Fault Module Version: 0.9.9.1
Fault Module Timestamp: 4ff24367
Exception Code: c0000005
Exception Offset: 0000ca0a
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I am not sure what is the problem, but uninstalling and reinstalling iTunes has no affect on the issue.

Uninstall iTunes in Windows is rather difficult. Before reinstall you should uninstall first. I found this for you in an older thread (read carefully):
QUOTE:
Resolution
Note that the following procedure involves a registry edit. Back up your registry prior to proceeding.
(1) Do a complete uninstall of iTunes and related software components as per the instructions in the following document (but do not attempt to reinstall iTunes just yet):
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7:
http://support.apple.com/kb/HT1923
(2) Launch Regedit as an administrator. In your Start Search field, type regedit. Right-click on the Regedit entry that comes up and select "Run as administrator" as per the following screenshot:
(3) In the left-hand pane of Regedit, click the triangle next to HKEY_LOCAL_MACHINE to expand its contents.
(4) Expand the contents of SOFTWARE
(5) Expand the contents of Microsoft
(6) Expand the contents of Windows
(7) Expand the contents of CurrentVersion
(8) Expand the contents of Installer
(9) Expand the contents of UserData
(10) Expand the contents of S-1-5-18
(11) Right-click on Components and select "Permissions" as per the following screenshot:
(12) In the "Permissions for Components" screen that comes up, click the Advanced button:
(13) In the "Advanced Security Settings for Components" screen that comes up, click the "Owner" tab.
(14) In the "Owner" tab, check the "Replace owner on subcontainers and objects tickbox, select "Administrators" and click Apply:
(14a) If (after clicking Apply) you receive a "Registry Editor could not set owner on the key currently selected, or some of its subkeys" message, click OK:
(15) Click OK in the "Advanced Security Settings for Components" screen.
(16) Click OK in the "Permissions for Components" screen.
(17) Quit out of Regedit.
(18) Try installing iTunes using the latest version of the iTunes installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
UNQUOTE

CDPdrv.exe has stopped working/responding

I have installed Cisco's IP Communicator v7.0(2) on my laptop in a lab environment. It registers to my CME running on a 3825 fine. I have enabled video support and launch Video Advantage. I can see video, and everything looks fine so far. I have not yet setup another camera and PC to test. My machine is Vista Business Edition. After a few minutes, I get a message that pops up and states something to the effect "CDPdrv.exe has stopped working". ??? Anyone seen this? I was going to try and verify this is just a Vista problem, but it runs way too slow on my XP VMWare machine to make it worth trying.
Regards,
Scott

I'm having the same issue as well. On a vista laptop I get "CDPdrv.exe has stopped working" just after installing UVA 2.1.2 on a laptop that already had IP Communicator 7.0.2.0 installed.
In this order...after getting the error the first time.
1) I uninstalled UVA.
2) I uninstalled IP Communicator.
3) I restarted my laptop
4) I installed IP Communicator, started it, and then restarted.
5) I installed UVA, started it, and then restarted.
6) I started to see the "CDPdrv.exe has stopped working"
If I choose "close the program" I am alerted of this issue a few minutes later. The service continues to crash and UVA does not seem to understand that I have IP Communicator installed...
I can use this setup without any issues with the IP phone hardware, it's just after I add IP Communicator (softphone) to the mix that I start getting errors.
I talked to a TAC engineer who told me that this was a "known issue" but did not elaborate...I'm waiting to hear back.
~Mike D

Itunes has stopped responding

I have tried every thing suggested i this forum about fixing this. The message I get is that iTunes has stopped responding, Windows is looking for a solution to the problem. Then it wants to close iTunes. This only happens when i try to access the store. My music and podcasts and everything else works fine. Just can't go to the store. Just downloaded the lates and greates version of iTunes. Below is the error i get in the event viewer and of course windows Tech support is no help. Never ever had an error in the event viewer had a solution to a problem of any kind.
Log Name:      Application
Source:        Application Error
Date:          11/16/2013 9:40:19 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ols2
Description:
Faulting application name: iTunes.exe, version: 11.1.3.8, time stamp: 0x5274a87d
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16408, time stamp: 0x523d4548
Exception code: 0xc06d007e
Fault offset: 0x00012eec
Faulting process id: 0x1a54
Faulting application start time: 0x01cee2ea6a23adb3
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: c6cbdcc6-4edd-11e3-bee7-606c6697e8b0
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-16T16:40:19.000000000Z" />
<EventRecordID>73904</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ols2</Computer>
    <Security />
</System>
<EventData>
    <Data>iTunes.exe</Data>
    <Data>11.1.3.8</Data>
    <Data>5274a87d</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.3.9600.16408</Data>
    <Data>523d4548</Data>
    <Data>c06d007e</Data>
    <Data>00012eec</Data>
    <Data>1a54</Data>
    <Data>01cee2ea6a23adb3</Data>
    <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
    <Data>C:\WINDOWS\SYSTEM32\KERNELBASE.dll</Data>
    <Data>c6cbdcc6-4edd-11e3-bee7-606c6697e8b0</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

See the following post for how to resolve. The fix involves copying a file from one directory to another. Very easy.
https://discussions.apple.com/message/24271500#24271500

"Apple Outlook DAV has stopped responding" message.

I installed the iCloud Control Panel, I asked it to sync Calendars & Tasks with Outlook. When I click apply it starts doing it's thing but then I get the "Apple Outlook DAV has stopped responding" message. This has happened multiple times and I've tried on multiple machines. Anyone else experiencing this problem? Any possible solutions? I'm running Windows 7 Ultimate x64 with Outlook 2010.

Try using the Microsoft PST Repair tool, usually located in (depending on your office version, 12,14 and x86 or x64):
C:\Program Files (x86)\Microsoft Office\Office14\scanpst.exe
run it on your PST , usually located:
disk drive:\users\username\AppData\Local\Microsoft\Outlook

Skype has stopped responding

When I start Skype everything works with login, when I'm logined then it stops and says Skype has stopped responding. I tried to uninstall LogMeIn Hamachi but it don't work!!! Help please!
Solved!
Go to Solution.

Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

TS3989 i keep getting a message saying that (applephotostreams.exe)has stopped working on my Pc, can someone please tell me how to fix !

I keep getting a message on my Pc saying (applephotostreams.exe) has stopped working. How do i fix ?

I responded to your other post, before I noticed this!
I'm glad it's fixed.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

PRINTER 6510 e-all in on. photo product core exe has stopped working?lang=en

i installed the 6510 all in one printer, it works great but the photo creation has a message that is (photo product core exe has stopped working). that should i do to fix it?
This question was solved.
View Solution.

Hi Puhu.
Please contact our customer support team at [email protected] They can help get you printing again.
Thanks for writing,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Photo Stream PC-error message "applephotostreams.exe has stopped working" and now additional photos that I want to upload is not uploading.

I sync my devices with a PC running windows. I have turned on Photo Stream on my PC, iPhone4S & iPad2.
On my PC it creates two default folders in Pictures called "My Photo Stream" and "Upload".
Instructions says that you can add photos to the "Upload" folder and it will automatically upload to your "My Photo Stream" folder and when your devices are connected to wi-fi they will upload to each device and show up in the "Photo Stream" section of Photos.
I was able to upload 50 photos but then I got an error message that applephotostreams.exe has stopped working.
How do I fix?

I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit?

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

ApplePhotoStreams.exe has stopped working on Windows 7 x64

same as the title.
The message "ApplePush.exe has stopped working" appears for a long time, and today, a new message "applephotostreams.exe has stopped working" appeard.
I using Windows 7 Ultimate x64 Chs on HP Z800 workstation.
How can I fix this?

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Applephotostreams.exe has stopped working on Windows 7 PC

applephotostreams.exe has stopped working. Windows 7 PC.

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
When the OUI tries to launch,the following error appears
setup.exe has stopped working.
Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
Thanks.
Edited by: 4joey1 on Apr 12, 2011 11:35 PM
Edited by: 4joey1 on Apr 12, 2011 11:36 PM

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

Rundll32.exe has stopped responding

Similar Messages

Maybe you are looking for