Runing a form without connecting to a DB

I am trying to develop a login screen for an application. How can I please run a form without connecting to the database?
Thank you in advance.

Just create a on-logon trigger with no action (null in the trigger. This will disable the default logon screen from Forms.

Similar Messages

How can you execute a form without connecting to database?

Hello,
Is it possible to run a form without connecting to database? If Yes, how?
Thanking you very much
Thobula Rakesh

Hello Form Friends,
After R&D I found that, it is very much possible to execute a form without connecting to Database.
Example:
Step 1: Create a new form 'Form1'
Step 2: Create a block 'Block1' and add button'But1'. Write a exit_form built-in on when-button-pressed trigger on 'But1' and compile it.
Step 3: Create a on-logon trigger at form level and just give a message('on-logon');
Step 4: Execute the form.
The form executes perfectly without asking any connection to the database. On-Logon trigger initiates a logon process to non-oracle data source.
Regards
Thobula Rakesh
Gati Intellect Systems Ltd

Error while generating form 16 in portal - Screen output without connection

Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AM

Dear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak

Is It Possible to Add a Fileserver to a DFS Replication Group Without Connectivity to FSMO Roles Holder DC But Connectivity to Site DC???

I apologize in advance for the rambling novella, but I tried to include as many details ahead of time as I could.
I guess like most issues, this one's been evolving for a while, it started out with us trying to add a new member
to a replication group that's on a subnet without connectivity to the FSMO roles holder. I'll try to describe the
layout as best as I can up front.
The AD only has one domain & both the forest & domain are at 2008R2 function level. We've got two sites defined in
Sites & Services, Site A is an off-site datacenter with one associated subnet & Site B with 6 associated subnets, A-F.
The two sites are connected by a WAN link from a cable provider. Subnets E & F at Site B have no connectivity to Site A
across that WAN, only what's available through the front side of the datacenter through the public Internet. The network
engineering group involved refuses to route that WAN traffic to those two subnets & we've got no recourse against that
decision; so I'm trying to find a way to accomplish this without that if possible.
The FSMO roles holder is located at Site A. I know that I can define a Site C, add Subnets E & F to that site, & then
configure an SMTP site link between Sites A & C, but that only handles AD replication, correct? That still wouldn't allow me, for example,
to enumerate DFS namespaces from subnets E & F, or to add a fileserver on either of those subnets as a member to an existing
DFS replication group, right? Also, root scalability is enabled on all the namespace shares.
Is there a way to accomplish both of these things without transferring the FSMO roles from the original DC at Site A to, say,
the bridgehead DC at Site B?
When the infrastructure was originally setup by a former analyst, the topology was much more simple & everything was left
under the Default First Site & no sites/subnets were setup until fairly recently to resolve authentication issues on
Subnets E & F... I bring this up just to say, the FSMO roles holder has held them throughout the build out & addition of
all sorts of systems & I'm honestly not sure what, if anything, the transfer of those roles will break.
I definitely don't claim to be an expert in any of this, I'll be the first to say that I'm a work-in-progress on this AD design stuff,
I'm all for R'ing the FM, but frankly I'm dragging bottom at this point in finding the right FM. I've been digging around
on Google, forums, & TechNet for the past week or so as this has evolved, but no resolution yet.
On VMs & machines on subnets E & F when I go to DFS Management -> Namespace -> Add Namespaces to Display..., none show up
automatically & when I click Show Namespaces, after a few seconds I get "The namespaces on DOMAIN cannot be enumerated. The
specified domain either does not exist or could not be contacted". If I run a dfsutil /pktinfo, nothing shows except \sysvol
but I can access the domain-based DFS shares through Windows Explorer with the UNC path \\DOMAIN-FQDN\Share-Name then when
I run a dfsutil /pktinfo it shows all the shares that I've accessed so far.
So either I'm doing something wrong, or, for some random large, multinational company, every sunbet & fileserver one wants
to add to a DFS Namespace has to be able to contact the FSMO roles holder? Or, are those ADs broken down with a child domain
for each Site & a FSMO roles holder for that child domain is located in each site?

Hi,
A DC in siteB should helpful. I still not see any article mentioned that a DFS client have to connect to PDC every time trying to access a DFS domain based namespace.
Please see following article. I pasted a part of it below:
http://technet.microsoft.com/en-us/library/cc782417(v=ws.10).aspx
Domain controllers play numerous roles in DFS:
Domain controllers store DFS metadata in Active Directory about domain-based namespaces. DFS metadata consists of information about entire namespace, including the root, root targets, links, link targets, and settings. By default,root servers
that host domain-based namespaces periodically poll the domain controller acting as the primary domain controller (PDC) emulator master to obtain an updated version of the DFS metadata and store this metadata in memory.
So Other DC needs to connect PDC for an updated metadata.
Whenever an administrator makes a change to a domain-based namespace, the
change is made on the domain controller acting as the PDC emulator master and is then replicated (via Active Directory replication) to other domain controllers in the domain.
Domain Name Referral Cache
A domain name referral contains the NetBIOS and DNS names of the local domain, all trusted domains in the forest, and domains in trusted forests. A
DFS client requests a domain name referral from a domain controller to determine the domains in which the clients can access domain-based namespaces.
Domain Controller Referral Cache
A domain controller referral contains the NetBIOS and DNS names of the domain controllers for the list of domains it has cached. A DFS client requests a domain controller referral from a domain controller (in the client’s domain)
to determine which domain controllers can provide a referral for a domain-based namespace.
Domain-based Root Referral Cache
The domain-based root referrals in this memory cache do not store targets in any particular order. The targets are sorted according to the target selection method only when requested from the client. Also, these referrals are based on DFS metadata stored
on the local domain controller, not the PDC emulator master.
Thus it seems to be acceptable to have a disconnect between sites shortly when cache is still working on siteB.
If you have any feedback on our support, please send to [email protected].

Reg:Screen output without connection to user.

Hi All
I am having an issue when I open Form 16 application in ess role under benefits and payments subfolder .
But I am getting an Critical error as shown below .
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_Failure.
Can any please guide me how to resolve this error.
As its very urgent requirement ..
Thanks & Regards
Deepika
Edited by: deepika_indian on Feb 9, 2012 7:49 AM

Hi,
Please check out in the Infotype 105 Sub Type 0001, Is there any user maintained there, As it is
required.
I could see a possible problem, in the past we've
encountered issues like this, but relevant to environments using Central User Administration(CUA). Please refer to SAP Note no:350619. The note makes following changes to the table t77SO by changing the value of TRSPCORR to ''X'' or 'T'. Please verify if the note is relevant to your environment if so kindly apply.
Please look at this [Help|http://forums.sdn.sap.com/thread.jspa?threadID=1038064] and [Help-1|http://forums.sdn.sap.com/thread.jspa?threadID=1925679]
Hope This is Help full for you!!!
Best Regards
Vijay K

ESS Persoanl Data Error(Screen output without connection to user)

Hi All,
        When i am trying to Save my data in my ESS----->Personal Info -
>Personal Data, i am getting below error, any body know how to resolve this issue, please let me know.
Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
     at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
     at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
     at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 64 more
and after that i went to ST22 Transaction Code in my ECC System i found two types of DUMP errors,
the below are those details.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          09/09/2008 08:19:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
"HRXSS_PER_CLEANUP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ERPDEV01"
Network address...... "10.88.1.6"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ERPDEV01"
Database type..... "MSSQL"
Database name..... "DE1"
Database user ID.. "de1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1229856
MM Free. 2957360
User and Transaction
Client.............. 210
User................ 937048
Language Key........ "E"
Transaction......... " "
Transactions ID..... "68211f907e6911ddbfef005056833439"
Program............. "SAPLHRXSS_PER_MAC"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 645
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "HRXSS_PER_CLEANUP"
Call Destination.... "<unknown>"
Source Server....... "ERPDEV04"
Source IP Address... "10.88.1.9"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
"HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 13
of the (Include) program "LHRXSS_PER_MACU04".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
line
1 of the (Include program "LHRXSS_PER_MACU04 ".
Source Code Extract
Line
SourceCde
1
FUNCTION hrxss_per_cleanup.
2
3
""Local interface:
4
*" EXPORTING
5
*"     VALUE(MESSAGES) TYPE BAPIRETTAB
6
7
8
CALL METHOD mac_adapter->cleanup
9
   IMPORTING
10
     messages = messages.
11
12
TRY.
>>>>>
CALL METHOD xss_adapter->cleanup
14
15
CATCH CX_HRPA_VIOLATED_ASSERTION .
16
ENDTRY.
17
18
ENDFUNCTION.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080909
SY-UZEIT
081916
SY-XPROG
SAPLHRXSS_PER_MAC
SY-XFORM
HRXSS_PER_CLEANUP
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
HRXSS_PER_CLEANUP
3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
HRXSS_PER_CLEANUP
2 FORM         SAPMSSY1                            SAPMSSY1                               85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
%_RFC_START
Chosen variables
Name
Val.
No.       4 Ty.          FUNCTION
Name HRXSS_PER_CLEANUP
MESSAGES
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
No.       3 Ty.          FORM
Name HRXSS_PER_CLEANUP
SYST-REPID
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_%_MESSAGES
Table[initial]
No.       2 Ty.          FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
3000
SY-XPROG
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_SPACE
2
0
0
0
No.       1 Ty.          MODULE (PBO)
Name %_RFC_START
%_PRINT
000                                                                                0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
3000
Internal notes
The termination was triggered in function "method_call_iref"
of the SAP kernel, in line 2207 of the module
"//bas/700_REL/src/krn/runt/abmethod.c#8".
The internal operation just processed is "METH".
Internal mode was started at 20080909081916.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : disp+work.EXE (pid=3864)
When      : 9/9/2008 8:19:16.162
Threads   : 2
Computer Name       : ERPDEV01
User Name           : SAPServiceDE1
Number of Processors: 4
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id d90
FramePtr         ReturnAd         Param#1          Function Name
0000000007d1bb20 0000000077d704bf 000000003879a800 ntdll!ZwWaitForSingleObject
0000000007d1bbc0 0000000001722981 0000000000000180 kernel32!WaitForSingleObjectEx
0000000007d1be10 00000000006110c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007d1be40 0000000000af8e9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007d1be90 0000000000afe0c0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7091)]
0000000007d1c870 000000000081768a 0000000001adae28 disp+work!ab_rabax [abrabax.c (1231)]
0000000007d1c8d0 0000000000830b12 0000000000000000 disp+work!method_call_iref [abmethod.c (2215)]
0000000007d1ca50 0000000000a0bac7 0000000000000008 disp+work!ab_extri [abextri.c (554)]
0000000007d1caa0 0000000000ac830c 0000000000000008 disp+work!ab_xevent [abrunt1.c (281)]
0000000007d1cb30 000000000066f348 0000000000000008 disp+work!ab_dstep [abdynpro.c (492)]
0000000007d1ccb0 0000000000672f1d 000007fe571fc890 disp+work!dynpmcal [dymainstp.c (2403)]
0000000007d1cd40 000000000067291a 000007fe571414a0 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007d1cdf0 00000000006320d5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007d1fc30 00000000004d7393 0000000000000003 disp+work!dynpen00 [dymain.c (1629)]
0000000007d1feb0 000000000042d5a6 000000000a595080 disp+work!TskhLoop [thxxhead.c (4470)]
0000000007d1fee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1121)]
0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007d1ff70 0000000077d5964c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
State Dump for Thread Id 1e0c
FramePtr         ReturnAd         Param#1          Function Name
000000000edffe40 0000000077d5f691 0000000007d86460 ntdll!NtFsControlFile
000000000edffeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
000000000edfff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000edfff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000edfffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMSSY1
0
04/11/2005
09:27:15
22528
E
1
Prg
SAPLSYST
1
02/13/2005
17:31:56
35840
E
2
Prg
SAPLHRXSS_PER_MAC
2
07/03/2008
12:14:05
58368
E
3
Prg
CX_SY_REF_IS_INITIAL==========CP
3
07/05/2005
13:10:16
10240
E
4
Typ
SCX_SRCPOS
0
05/18/2004
14:07:11
2048
5
Prg
CX_DYNAMIC_CHECK==============CP
5
07/05/2005
13:10:16
10240
E
6
Prg
CX_ROOT=======================CP
6
02/06/2008
15:43:48
11264
E
7
Prg
CX_NO_CHECK===================CP
7
07/05/2005
13:10:16
10240
E
8
Prg
CX_SY_NO_HANDLER==============CP
8
07/05/2005
13:10:16
10240
E
9
Typ
SYST
0
09/09/2004
14:18:12
31744
Directory of Application Tables
Name                                     Date       Time       Lngth
Val.
Program SAPMSSY1
SYST                                       / /       : :     00004612
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
243
FUNC
03
001F
LHRXSS_PER_MACU03
1
244
PAR2
02
0000
001F
C000
LHRXSS_PER_MACU03
1
246
FUNC
13
0003
LHRXSS_PER_MACU03
1
247
PAR2
01
0000
0014
C001
LHRXSS_PER_MACU03
1
249
FUNC
FF
0000
LHRXSS_PER_MACU03
1
250
ENDF
00
0000
LHRXSS_PER_MACU03
1
251
00
0000
LHRXSS_PER_MACU03
1
252
STCK
02
C001
LHRXSS_PER_MACU03
1
253
CPOP
00
0000
LHRXSS_PER_MACU03
1
254
00
0000
LHRXSS_PER_MACU03
1
255
FUNP
3E
0000
0014
8000
0000
8000
0000
0000
LHRXSS_PER_MACU04
1
259
FUNP
80
0000
0000
0000
0000
0000
0000
0000
LHRXSS_PER_MACU04
1
>>>>>
METH
03
0000
0000
8006
0000
0000
0000
0000
LHRXSS_PER_MACU04
13
267
PAR2
00
0000
0001
0000
LHRXSS_PER_MACU04
13
269
FUNE
00
0000
LHRXSS_PER_MACU04
18
270
00
0000
LHRXSS_PER_MACU04
18
271
PERP
00
0000
LHRXSS_PER_MACU04
1
272
FUNC
03
E844
LHRXSS_PER_MACU04
1
273
FUNC
03
0020
LHRXSS_PER_MACU04
1
274
FUNC
13
0003
LHRXSS_PER_MACU04
1
Second Dump
Runtime Errors         DYNPRO_SEND_IN_BACKGROUND
Date and Time          09/09/2008 08:19:15
Short text
Screen output without connection to user.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTRD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During background processing, the system attempted to send a
screen to a user.
Current screen: "SAPLSTRD " 0351.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DYNPRO_SEND_IN_BACKGROUND" " "
"SAPLSTRD" or " "
"SYSTEM-EXIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ERPDEV01"
Network address...... "10.88.1.6"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "ERPDEV01"
Database type..... "MSSQL"
Database name..... "DE1"
Database user ID.. "de1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 12569520
Heap.... 0
Page.... 131072
MM Used. 8307376
MM Free. 4259072
User and Transaction
Client.............. 210
User................ 937048
Language Key........ "E"
Transaction......... " "
Transactions ID..... "68211f907e6911ddbfef005056833439"
Program............. "SAPLSTRD"
Screen.............. "SAPLSTRD 0351"
Screen Line......... 0
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 700
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Nam

Hello Abhiram,
Please i request weather you have assign 0105 - Communication infotype to ESSuser and
check the following JCos has been configured.
SAP_R3_Financials
SAP_R3_Financials_Metadata
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
SAP_R3_SelfServiceGenerics
SAP_R3_SelfServiceGenerics_MetaData
SAP_R3_Travel
SAP_R3_Travel_MetaData
SAP_R3_SelfServiceGenerics_MetaDataFIN
SAP_R3_SelfServiceGenericsFIN
let me know this
points if problem solved
please close thread if problem solved
thanksyou,
regards
Vijai

RFC system error: Screen output without connection to user

After running transaction SMWP, we nagivate to the "Parameters for object load management" node using the following path:
Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC -> Parameters for object load management
Under the node Parameters for object load management, when we double click any of the entries we receive the following error message in the form of a pop-up: RFC system error: Screen output without connection to user.
Has anyone encountered the aforementioned error?

Hi,
while creating the syncbo you have to give the RFC destination for corresponding Bapi wrappers
so plz check that.
and can you please explain the exact error in detail and add the trace..
Regards
Manohar

Screen output without connection to user, Message struck at inbound queue

Chaps,
I executed inbound proxy form PI 7.0, the message was struck in the inbound queue of ECC 6.0,
with status text "Screen output without connection to user" then when I apply execute LUW then it is converted to
"ThiSend:bad tm type /connection closed (no data)".
when i test the same message from 'SPROXY' t.code, inbound proxy class was working fine.
I came to know that when we call an ABAP program in side a proxy then it will throw same error what I got by checking the below url
Message struck at inbound que in server proxy
But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
am I missing any basic things? please guide.

But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
I too believe ..
because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
It is saying not suggestable...!!!! BAPI calls work perfectly !1
In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
am I missing any basic things? please guide.
Seems so,
Lets try below things..
1. Plz check the user is having auth to run the executable program in ECC.
2. It seems that you are not using the proxy structures in a correct way..and check the calling program also..!!
Edited by: Santosh Rawat on Jul 30, 2009 1:12 PM

Screen output without connection to user - Goals Standard APP

Hi Experts,
We have configured Standard PA iview - GOALS (web dynpro application HAP_A_PMP_GOALS) into Quality Portal. When creating new goal and clicking on save button we are getting following dump. But the same is working in development server which is not working in quality.
Only difference between these two servers is, SSO certificate is configured in Dev but no in Quality. But I guess this should be an issue since in both the servers I am using user mapping (not logonticket).
The following error text was processed in the system DRC : Screen output without connection to user.
The error occurred on the application server drcr3cs2_DRC_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: TRINT_ORDER_CHOICE of program SAPLSTRD
Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
Function: TR_EDIT_CHECK_OBJECTS_KEYS of program SAPLSTRD
Function: SCPR_SWITCH_OBJECTS_INSERT of program SAPLSCPRCRITICAL
Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
Function: TR_OBJECTS_INSERT of program SAPLSTRD
Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
Form: UPDATE_PLOG of program SAPLRHAP
Function: RH_UPDATE_DATABASE of program SAPLRHAP
Function: HRHAP_C_VJ_CREATE of program SAPLHRHAP_C_IF_CASCADING_GOALS
any one knows what could be the issue, any particular service need to be activated in Backend
Thanks
Murthy

Hi Chinna Babu,
Could you please elaborate your answer ? which back end configuration was missing ?
Regards,
Bindumadhav Ambike

How to run the form without logon?

sir:
I want to create the application without logon,but before the
form appear,I must logon, I want to know how to run the form
without logon(comment:I don't connect to database!);
null

steve (guest) wrote:
: Create trigger ON-LOGON. Supply alternative logon code
: or NULL; if you want to do nothing. Form will execute
: but will not produce logon window.
: gang lee (guest) wrote:
: : sir:
: : I want to create the application without logon,but before
the
: : form appear,I must logon, I want to know how to run the form
: : without logon(comment:I don't connect to database!);
Mr steve,thanks for your help!
null

ProC - sqlcheck=semantics without connection to a database - handling views

Hello!
I have a question about ProC and embedded SQL. I'm not sure if this falls under
the OCCI umbrella but when I originally posted my question to the SQL forum I
was directed to the OCCI forum. My apologies if my question is off-topic here as well.
We would like to run ProC with sqlcheck=semantics without connecting to a database..
To do this we insert an
EXEC SQL INCLUDE definitions.pc;
in each of our source files containing embedded sql. The file definitions.pc contains
a set of statements of the form "EXEC SQL DECLARE xxx TABLE ( .... );".
This file is generated from another file containing "CREATE TABLE" statements.
This seems to work, if our embedded SQL does not agree with the table definitions
in definitions.pc then ProC complains.
We would now like to get semantic checking for embedded SQL that refers to views
but are unsure how to achieve this. There does not seem to be a statement
"EXEC SQL DECLARE xxxx VIEW".
One way to do this would be to add a fake "EXEC SQL DECLARE xxx TABLE"
statement to definitions.pc for each view in the database. Writing a tool that translates
a set of "CREATE TABLE" into a set of "EXEC SQL DECLARE TABLE" is easy, but
translating "CREATE VIEW" into a corresponding faked "EXEX SQL DECLARE xxx TABLE"
seems much harder.
Is there a way to achieve semantic checking of embedded SQL that refers to views
without connecting to a database or without writing a tool that parses full "create view"
statements?
Thanks,
Lars

I'm not sure if this falls under the OCCI umbrellaOnly in the same way that questions about chalk fall under the cheese umbrella.
Pro*C and OCCI are different subjects.
We would like to run ProC with sqlcheck=semantics without connecting to a database.Sorry, that's impossible; it's a direct contradiction. sqlcheck=semantics REQUIRES a connection to the database, otherwise the SQLCHECK cannot check the SEMANTICS; to do that it needs to connect to the database.
If you cannot connect to a database then you can't use sqlcheck=semantics, which in turn means you can't use embedded PL/SQL.
However you can use Dynamic PL/SQL, which means you have the PL/SQL in a character string and explicitly code what Pro*C does for you automatically. There are very few changes needed to accomplish this, and no change in performance as what you would be doing explicitly in code is exactly the same as what Pro*C does for you in the background; the only difference is syntactic sugar.
If code changes are impossible and you must have a database, then you will have to install one on the development machine and load into it the objects that Pro*C needs to check in order to complete the semantic check. What isn't checked is that the database at precompile time is the same as the database at runtime, so this is a valid solution.

Form without server

Hi,
I have an Access database, which I want to record in a CD. In order to search this database I want to make a java search form that will be also included in the CD .. I am starting with java and forms without servers are new to me ..
How should I do it?
So far I have been thinking in an applet showed in an html page. An applet with an AWT form linked to an application that connects the form to the database .. but, what an application of this kind must content to stand in the CD without compiling every time is needed ???
Thanks a lot

There is a DVD from Sun ( Sun Developer Software Starter Kit ; you can get one for free if you ask some Sun marketing guy or attend to some Sun conference, like JavaOne or Sun Tech Days, or you can pay for a subscription ( http://developers.sun.com/prodtech/swkits/subscribe/order.html ) ) The point is that you don't need to have such DVD, only get its idea.
The DVD has a Tomcat-based search application.
Architecture of the search app:
- The client must have J2SDK 1.4.X installed; it not installed, the installer offers to install it
- There is a script that starts Tomcat and starts a browser (pointing to http://localhost:8080/index.jsp)
- Tomcat runs a typical web application with search capabilities etc.
It's a heavy solution, but for the target market (Java and/or Solaris developers, usually having full-fledged machines with lots of RAM and CPU power) it's adequate.

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

I receive emails from my provider but cannot send from my iPad without connecting to my email online

I cannot send emails from my iPad without connecting to my provider.
Can anyone help please

Are your E-mail account settings correct? e.g. POP3 and SMTP settings..

How do I delete multiple photos at a time on my iphone 5 without connecting to my mac or other computer? And without deleting ALL photos from my iphone?

Well, I guess my heading says it all. I am trying to delete multiple (like A LOT) of photos from my camera roll on my iphone 5 without connecting to my computer. All other instructions I've read on here do not work. (I'm not saying I read ALL instructions though) But the ones I've read, do not work.
I DO NOT want to connect to my computer to do this, so please read what I am asking! It HAS to be possible, it's just downright silly if it isn't and I'll be ****** about the 3 grand I've given to Apple in the last few months for various reasons...
Thank you in advance for any responses.

Okay. Awesome! I feel like such a dodo that was so freaking simple!
Now I have another simple person question that feels stupid too but oh well apparently my brain doesn't like to work at 5 a.m. when I am in bad pain but...
Okay, so I've deleted them from my phone manually, they are already ALL on my mac, when I plug my phone back into my mac to sync music and any New photos, will the old photos that I deleted that are on the mac, go back on the phone? Der. I feel like I already know the answer, but I'm asking anyways...
Please, thank you, and sorry in advance!

Runing a form without connecting to a DB

Similar Messages

Maybe you are looking for