RunInstaller error of Display -- linux 5.8, 11gr2

During installation process, I am getting following error. It works in production, but not in dev env.
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<export DISPLAY=localhost:0.0
/home/oracle >xhost +x
xhost: unable to open display "localhost:0.0"

>What is missing?
Knowledge of how to use X-Windows software.
Root cause & solution have NOTHING to do with Oracle database.
does xclock successfully run on database server?
If xclock does not work, then OUI won't work either.
You must connect (login) to database server system with X-11 forwarding enabled.
ssh -X oracle@dbserver

Similar Messages

Oracle 10G Linux runInstaller Error in writing to directory

RDBMS Version: 10.1.0.3.0
Operating System and Version: Enterprise Red Hat Linux 4.0
Linux runInstaller Error in writing to directory
Steps :-
1. Downloaded the Install 10.1.0.3 for Linux X86
2. Followed the Instructions as per B15521-01
3. When running runInstaller got below Error
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2005-06-28_01-40-22PM/installActions2005-06-28_01-40-22PM.log
4. Found Patch 4153257 after unzipping the file and running as below got another error
$ ./runInstaller -paramFile /home/oracle/p4153257
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The Java RunTime Environment was not found at 0/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
5. Then Copied the oraparam.ini to the folder where the original oraparam.ini file was present ie /tmp/orcl/Disk1/install
6. After running the installer again got below error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_01-53-49PM. Please wait ...sh: /tmp/orcl/Disk1/install/unzip: No such file or directory
Error in writing to directory /tmp/OraInstall2005-06-28_01-53-49PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
7. Saw the Error that it was looking for unzip in /tmp/orcl/Disk1/install so Created a Soft link
8. Still the other Error exists ie as below. Well the DIR is created and oracle user has written files. So not sure why it says check disk space or directory is writable.
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_02-23-50PM. Please wait ...
Error in writing to directory /tmp/OraInstall2005-06-28_02-23-50PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
$ ls -al /tmp/OraInstall2005-06-28_02-23-50PM
total 40
drwxr-xr-x 3 oracle oinstall 4096 Jun 28 14:23 .
drwxrwxrwt 44 root root 4096 Jun 29 04:03 ..
-rwxr-xr-x 1 oracle oinstall 4036 Jun 28 14:23 command_output_27899
drwxr-xr-x 2 oracle oinstall 4096 Jun 28 14:23 images
-rwxr-xr-x 1 oracle oinstall 528 Jun 28 14:23 installActions2005-06-28_02-23-50PM.log

I am not sure what was wrong in the Initial download of the Install.
I did it again and this time it came properly and all the files in the install directory ie unzip was present and the Installer came up properly.

How to get Error Trace on Linux

Hi All,
I am trying to run my JAR ( A simple JAR that uses JCO) on Linux SUSE 10, when I run it, it just gives me the following error, there is no trace.
How can I get the full trace. Please help.
This is what im doing and the next line is the error message.
dsadm@mach1:/opt/IBM/media/SAP/sapjco> java -jar ditest1.jar
The java class is not found: com/sap/mw/jco/JCO$Exception
dsadm@mach1:/opt/IBM/media/SAP/sapjco>
This is the (ONLY) class file in the JAR, I exported my JAVA project from NWDS as a JAR file.
package com.test;
* Conn.java
* Property of SAP AG, Walldorf
* (c) Copyright SAP AG, Walldorf, 2000-2003.
* All rights reserved.
import com.sap.mw.jco.*;
public class Conn {
// The MySAP.com system we gonna be using
static final String SID = "R3";
// The repository we will be using
com.sap.mw.jco.IRepository repository;
public Conn()
     System.out.println("**** DI11 *****");
         this.buildConnection();
       System.out.println("**** DI 22*****");
public void buildConnection(){
     try {
               System.out.println("**** DI2 *****");
            // Add a connection pool to the specified system
            //    The pool will be saved in the pool list to be used
            //    from other threads by JCO.getClient(SID).
            //    The pool must be explicitely removed by JCO.removeClientPool(SID)
          com.sap.mw.jco.JCO.addClientPool( SID,         // Alias for this pool
                                    10,          // Max. number of connections
                                    "040",       // SAP client
                                    "testuser",   // userid
                                    "pass", // password
                                    "EN",        // language
                                    "ipaddress",// host name
                                    "xx" );
            // Create a new repository
            //    The repository caches the function and structure definitions
            //    to be used for all calls to the system SID. The creation of
            //    redundant instances cause performance and memory waste.
            repository = com.sap.mw.jco.JCO.createRepository("MYRepository", SID);
          catch (Exception ex) {
            System.out.println("Caught an exception: \n" + ex.getMessage());
// Retrieves and prints information about the remote system
public void systemInfo()
    try {
      // Get a function template from the repository
      IFunctionTemplate ftemplate = repository.getFunctionTemplate("RFC_SYSTEM_INFO");
      // if the function definition was found in backend system
      if(ftemplate != null) {
        // Create a function from the template
        JCO.Function function = ftemplate.getFunction();
        // Get a client from the pool
        JCO.Client client = JCO.getClient(SID);
        // We can call 'RFC_SYSTEM_INFO' directly since it does not need any input parameters
        client.execute(function);
        // The export parameter 'RFCSI_EXPORT' contains a structure of type 'RFCSI'
        JCO.Structure s = function.getExportParameterList().getStructure("RFCSI_EXPORT");
        // Use enumeration to loop over all fields of the structure
        System.out.println("System info for " + SID + ":\n" +
        for (JCO.FieldIterator e = s.fields(); e.hasMoreElements(); ) {
          JCO.Field field = e.nextField();
          System.out.println(field.getName() + ":\t" + field.getString());
        }//for
        System.out.println("\n\n");
        // Release the client into the pool
        JCO.releaseClient(client);
      else {
         System.out.println("Function RFC_SYSTEM_INFO not found in backend system.");
     catch (JCO.Exception ex) {
       System.out.println("Caught an exception: \n" + ex);
// Retrieves and displays a sales order list
public void salesOrders()
     JCO.Client client = null;
    try {
      // Get a function template from the repository
      IFunctionTemplate ftemplate = repository.getFunctionTemplate("BAPI_SALESORDER_GETLIST");
      // if the function definition was found in backend system
      if(ftemplate != null) {
          // Create a function from the template
          JCO.Function function = ftemplate.getFunction();
          // Get a client from the pool
          client = JCO.getClient(SID);
          // Fill in input parameters
          JCO.ParameterList input = function.getImportParameterList();
          input.setValue("0000001200", "CUSTOMER_NUMBER"   );
          input.setValue(      "1000", "SALES_ORGANIZATION");
          input.setValue(         "0", "TRANSACTION_GROUP" );
          // Call the remote system
          client.execute(function);
          // Print return message
          JCO.Structure ret = function.getExportParameterList().getStructure("RETURN");
          System.out.println("BAPI_SALES_ORDER_GETLIST RETURN: " + ret.getString("MESSAGE"));
          // Get table containing the orders
          JCO.Table sales_orders = function.getTableParameterList().getTable("SALES_ORDERS");
          // Print results
          if (sales_orders.getNumRows() > 0) {
            // Loop over all rows
            do {
              System.out.println("-----------------------------------------");
              // Loop over all columns in the current row
              for (JCO.FieldIterator e = sales_orders.fields(); e.hasMoreElements(); ) {
                 JCO.Field field = e.nextField();
                 System.out.println(field.getName() + ":\t" + field.getString());
              }//for
            } while(sales_orders.nextRow());
          else {
            System.out.println("No results found");
          }//if
      else {
         System.out.println("Function BAPI_SALESORDER_GETLIST not found in backend system.");
       }//if
    catch (Exception ex) {
      System.out.println("Caught an exception: \n" + ex);
    finally {
       // Release the client to the pool
      JCO.releaseClient(client);
protected void cleanUp() {
    JCO.removeClientPool(SID);
public static void main(String[] argv)
    Conn e = new Conn();
e.systemInfo();
e.salesOrders();
e.cleanUp();
This is standard SAP code, please help on how can I get the complete error trace on linux.

You do not require RFCSDK to build a jaava application that uses JCO on LINUX.

Error when displaying xellerate form

Hello,
I have the following error when displaying the form of any xellerate users :
ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
<Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
<ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
What is the problem with my attribute definition ?
Thanks for your help,
Kind regards,
mdadikn

Hello,
I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
From the Error Log:
Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
Line with issue from FormMetaData.xml:
<Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
<ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
</Attribute>
Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
Thank you,
Ryan

Error in displaying report

I am geting the following error while displaying report-
Internal error (-101) occured [Message 131-183]
The reports are geting displayed on other pcs but not on my pc.I tried unistalling and re-installing sap but the error was not solved.

Daan,
 The printer was not installed on my pc.After installing printer, the reports are visible.Thanks for u r help.
 Regards,
 Dilip Kumbhar

Error while displaying report

I am getting following error while displaying report in sap business one-
Internal error (-101) occured [Message 131-183]
I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.

Hi Yogesh,
 I haven't installed any patch on my client machine.
 Regards,
 Dilip Kumbhar

Huey Pro calibrator- error message display measurement Error

i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please

>a nice NVidia card... Please help Adobe!
1a - what is the model nVidia card, and what is your driver version?
1b - for instance, I have a GTX 285 and driver 296.10
2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
2b - how to contact Adobe...
Adobe contact information
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7

Error not displaying while Invoice Apprvoal in detail tab

Hi,
Here is the problem we are facing. We are at SRM 5.0 with Extended Classic and no IMS configured.
u2022 Activity u2013
1. Invoice with value more than PO value is posted and triggered for approval. Zero Tolerance maintained.
2. Posted Invoice has status u2013 u2018To Be Corrected Manuallyu2019.
3. Work Item triggered for approval and is in Approver's inbox.
4. Approver approves the Invoice.
u2022 Expected Result u2013 If Approver tries to approve the Invoice then he/she should get error message u2018Document Contains Errors Approval Not Possibleu2019.
u2022 Actual System Behavioru2013
1. If approver tries to approve the Invoice at header level then error message u2018Document Contains Errors -
>Approval Not Possibleu2019 is getting populated. But we have deactivated the approval/rejection button at the header level.
2. Approver is opening up the invoice document and then approves the Invoice. At that time, error message mentioned in point 1 is not getting populated. Instead the message appears as u2018The Invoice Approvedu2019. This is a false indication to approver and work item remains in Approveru2019s queue.
Any solution to resolve this issue?

Hi AP,
Same approver when approves the Invoice at header level, error msg displayed properly. But if he tries to appove the invoice in detailed view - clicking on SAVE - then the error msg is not displayed and instead it shows Invoice Approved and workitem remains in his work list.
Is this because of Autho issue? In that case what autho objects we need to check?
My wild guess about this issue could be because system is not checking if the Doc is complete or not to trigger the respective message. Any thoughts?
Thanks.

Error message display for PO creation with reference to internal orders

Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa Murthy

Hi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy

ENT-06954: Error while Displaying BIBean for Cube/Dimension Dataviewer.

Hi all,
I have defined a cube with three dimensions. All elements are deployed and the mappings is executed successfully. If I try to open the dataviewer either for the cube or for the dimensions I receive the following errors:
ENT-06954: Error while Displaying BIBean for Cube Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerMain.getDataviewObject(CubeDataViewerMain.java:391)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerEditor._init(CubeDataViewerEditor.java:66)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.getDimensionListObject(DimDataViewerMain.java:479)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:89)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
In another warehouse this function works properly. I am using OWB 10gR2 (10.2.0.1.31).
Any hints to fix this issue would be appreciated.
Thanks in Advance, C.

If you run OWB using the supplied shell script or batch file are there other errors on the console before the exception. OWB uses a component (OLAPI does some validation over and above any other) which dumps the errors on the the standard output which often illustrates some invalid metadata in the OLAP catalog.

ERROR MESSAGE : display of the query spec is not allowed

Hi all,
I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
Can anyone help me in understanding this issue?
Thanks,
Raj.

Have you check your authorizaiton trace with ST01?
You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

Hi guys, I have a problem with my new macbook pro 15". I tried to updtate the apps (iPhoto, iMovie and Garageband), but an error was displayed "You have updates available for other accounts". I don't have other accounts!!! :(

Hi guys,
I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other account, i tried everything found on the net but nothing seems to work...Please help me!!!!

Same thing for me it writes "To update this application, sign in to the account you used to purchase it."

Error when displaying - on table control

hy guys,
im working with a table control..
the problem is when the table control loads a -200 or any number with - .
ERROR
DYNPRO_FIELD_CONVERSION
I already tried to change the format of the table field to currency, dec, char and numc
currency the error is displayed.
dec the error is displayed
char the column is displayed empty
numc the table is displayed but the - is not displayed in the field.
any ideas?
Edited by: javier santana on Sep 7, 2008 7:26 PM

Hi,
The problem mayb with the -ve value display, keep the format to currency and double click on the field in table control, u wil find a option to display -ve values select that
If -ve value is ur prob then this should work

SQL error not displayed. Instead wwv_flow.accept was not found

Hi,
My Question:
Why does the SQL error in this case not get propagated up the chain?
BACKGOUND:
Just spent a few hours trying to figure out why when trying to insert into a table using a wizard created page I was getting the error: The requested URL /pls/htmldb/wwv_flow.accept was not found on this server. It turns out that the error message is a red herring, and the problem was caused by a SQL error that I thought should have been caught and displayed.
When running the page under debug, the error is displayed, but run as Joe Blow user, the www_flow.accept error is received.
DETAILS
Process details where the insert takes place:</h3>
Process point:
After Submit - after computations and validations
Process Messaging
Process Error Message
Unable to insert a row to TRAINING_SESSIONS
HTML DB ERROR (NOT IN DEBUG MODE)
This is the error the end user sees in the browser:
The requested URL /pls/htmldb/wwv_flow.accept was not found on this server
APACHE ERROR_LOG
[Sun Jun 06 17:50:28 2004] [error] [client 127.0.0.1] [ecid: 1086508225:10.6.6.6:1724:1732:320,0] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-03113: end-of-file on communication channel
[Sun Jun 06 17:50:28 2004] [alert] [client 127.0.0.1] [ecid: 1086508225:10.6.6.6:1724:1732:320,0] mod_plsql: Unable to reset state for mode 0: Err 3114 url=>/pls/htmldb/wwv_flow.accept
HTMLDB DEBUG MODE OUTPUT
This is what you see when running the page as developer with debug on:
0.01: Processing point: AFTER_SUBMIT
0.01: ...PLSQL (AFTER_SUBMIT)
INSERT INTO "TRAINING_SESSIONS" ("TRNG_ID",
"COURSE_ID",
"START_DATE",
"LOCATION",
"COST")
VALUES ( TRNG_SEQ.NEXTVAL,
:P27_COURSE_ID,
:P27_START_DATE,
:P27_LOCATION
:P27_COST)
0.01: Show ERROR page...
0.04: Processing point: AFTER_ERROR_HEADER Home
Error Unable to insert a row to TRAINING_SESSIONS
OK
0.06: Processing point: BEFORE_ERROR_FOOTER
ORA-06550: line 6, column 9: PL/SQL: ORA-00947: not enough values ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
ACTUAL PROBLEM:
The sequence TRNG_SEQ does not exist!

Has anyone found what causes this problem? I am running HTMLDB 1.6
I have a HTMLDB application running against four databases. I develop in one and export and import the application to all databases. It appears that on the databases that are NOT development, this www_flow.accept was not found comes up instead of the error page.
Please help! We are getting so close to wanting to release this application.

HT201210 iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly

iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly". I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would not open HELP!

Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\
C:\Program Files\iTunes\
C:\Program Files\iPod\
If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too...

RunInstaller error of Display -- linux 5.8, 11gr2

Similar Messages

Maybe you are looking for