./runInstaller problem in notes 443617.1
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-11-30_04-16-07PM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-11-30_04-16-07PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Note:443617.1 is saying to install
nstall the package libXp by the command:
# rpm -ivh </path/to/>libXp.<version>.i386.rpm
I did like ..............did'n show up in grep
[root@localhost SRPMS]# rpm -Uvh libXp-1.0.0-8.src.rpm
warning: libXp-1.0.0-8.src.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
1:libXp warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
########################################### [100%]
[root@localhost SRPMS]# rpm -qa | grep libXp-1.0.0-8.src.rpm
[root@localhost SRPMS]#
Is this related to your other thread?
./runInstaller question
Why the duplicate post?
Note:443617.1 is saying to install
nstall the package libXp by the command:
# rpm -ivh </path/to/>libXp.<version>.i386.rpm
libXp-1.0.0-8.src.rpmThese does not match. You installed the source rpm, not the binaries.
Similar Messages
-
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?
No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.
-
Go figure both Apple support and Netflixs support "have never seen a problem quite like mine" the same day my free trial has ended. And no the, problem is not with my Netflixs account because they charged my debit card just fine. I'm trying to play instant movies on my netflixs account and every time I click on a movie or show it just shows up a black screen with no play controls. According to Netflixs I'm either missing a peice of software or I need to uninstall and reinstall a program or plug-in or something. At first they thought it was Microsoft Silverlight, but I've tried uninstalling and reinstalling that several times and nothing has changed, plus since I had no play controls as well the problem is definetly not Silverlight. So I was wondering what other types of software or plug-ins are needed to play Netflixs movies or if anyones else has had the same issue and knew how to fix it. And I know that it is a problem with my Macbook Pro, because my netflixs accout still works on my sister's computers. I've tried restarting my computer, restarting Firefox, signing out and back in on Netflixs, praying to God, clearing my cookies and chache, saying nice things to my laptop, yelling at my laptop, and pretty much everything under the sun. Nothing I do is fixing it. Please someone help me figure this out.
MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay! -
When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?
I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain. -
Hi Expert , crystal report export problem. system not responding
Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar GuptaDear Raj,
Please try this
Try
Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
rptDoc.Load(rptPath)
rptView.ShowExportButton = True
rptView.ReportSource = rptDoc
For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
Next
For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
oSubReport = rptObject
rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
Next
End If
Next
Next
'Setting Paper
Dim rawKind As Integer = 0
Dim printSet As New System.Drawing.Printing.PrinterSettings
For i As Integer = 0 To printSet.PaperSizes.Count - 1
If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
Exit For
End If
Next
Dim MyTest As New SaveFileDialog
rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
rptDoc.ExportToStream(ExportFormatType.Excel)
'rptDoc.SaveAs("C:\TBKING.xls", True)
'''How to export the report
Try
Dim CrExportOptions As ExportOptions
Dim CrDiskFileDestinationOptions As New _
DiskFileDestinationOptions()
Dim rename As String
rename = rptName.Replace(".rpt", "")
Dim CrFormatTypeOptions As New ExcelFormatOptions
CrDiskFileDestinationOptions.DiskFileName = _
"c:\Report\" & rename & "_Export_File.xls"
CrExportOptions = rptDoc.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.Excel
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
rptDoc.Export()
Catch ex As Exception
MsgBox(ex.ToString)
End Try
'' end by kevin shah
rptView.Show()
rptView.ShowExportButton = True
Dim oFrm As New System.Windows.Forms.Form
rptView.DisplayGroupTree = True
rptView.Dock = System.Windows.Forms.DockStyle.Fill
rptView.Location = New System.Drawing.Point(0, 0)
oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
oFrm.Controls.Add(rptView)
oFrm.Name = "Report Viewer"
oFrm.Text = "Report Viewer11"
oFrm.ResumeLayout(True)
oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
oFrm.TopMost = True
oFrm.ShowDialog()
Catch ex As Exception
objMain.objApplication.MessageBox(ex.Message)
End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin -
I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck! -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?
Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart. -
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps. -
THIS IS JUST WHAT I AM ON ABOUT!THIS PROBLEM IS NOT OF MY MAKING ,IT HAS OCCURRED WHEN I DOWNLOADED FIREFOX 4NOW I AM SUPPOSED TO REGISTER,FILL IN ALL KINDS OF DETAILS,ETC.IT IS NOT MY PROBLEM IT IS SOMETHING WRONG WITH FIREFOX!
When I upgraded my Firefox I completely lost my key page with all the icons on it. How in the world do I get it back?
-
Assigning value to a two-dimensional byte array - problem or not?
I am facing a really strange issue.
I have a 2D byte array of 10 rows and a byte array of some audio bytes:
byte[][] buf = new byte[10][];
byte[] a = ~ some bytes read from an audio streamWhen I assign like this:
for (int i=0; i<10; i++) {
a = ~read some audio bytes // this method properly returns a byte[]
buf[i] = a;
}the assignment is not working!!!
If I use this:
for (int i=0; i<10; i++) {
a = ~read some audio bytes
for (int j=0; j<a.length; j++) {
buf[i][j] = a[j];
}or this:
for (int i=0; i<10; i++) {
System.arraycopy(a, 0, buf, 0, a.length);
}everything works fine, which is really odd!!
I use this type of value assignment for the first time in byte arrays.
However, I never had the same problem with integers, where the problem does not appear:int[] a = new int[] {1, 2, 3, 4, 5};
int[][] b = new int[3][5];
for (int i=0; i<3; i++) {
b[i] = a;
// This works fineAnybody has a clue about what's happening?
Is it a Java issue or a programmers mistake?Back again! I'm trying to track down the problem.
Here is most of my actual code to get a better idea.
private void test() {
byte[][] buf1 = new byte[11][];
byte[][] buf2 = new byte[11][];
AudioInputStream audioInputStream = AudioSystem.getAudioInputStream(audioFile);
byte[] audioBytes = new byte[100];
int serialNumber = 0;
while (audioInputStream.read(audioBytes) != -1) {
if (serialNumber == 10) {
serialNumber = 0; // breakpoint here for debugging
// Fill buf1 -- working
for (int i=0; i<audioBytes.length; i++) {
buf1[serialNumber] = audioBytes[i];
// Fill buf2 -- not working
buf2[serialNumber] = new byte[audioBytes.length];
buf2[serialNumber] = audioBytes;
serialNumber++;
}I debugged the program, using a debug point after taking 10 "groups" of byte arrays (audioBytes) from the audio file.
The result (as also indicated later by the audio output) is this:
At the debug point the values of buf1's elements change in every loop, while buf2's remain unchanged, always having the initial value of audioBytes!
It's really strange and annoying. These are the debugging results for the [first|http://eevoskos.googlepages.com/loop1.jpg] , [second|http://eevoskos.googlepages.com/loop2.jpg] and [third|http://eevoskos.googlepages.com/loop3.jpg] loop.
I really can't see any mistake in the code.
Could it be a Netbeans 6.1 bug or something?
The problem appears both with jdk 5 or 6. -
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem. -
My Mic is very very Low! Help!! the problem is not in software!!
my mic on iphone, Hardly anyone can hear me, and i have to put my mouth up to the speaker and practically scream, please somebody tell me how i fix this? i live in Brasil,Brasilia and not have iphone assistence here, and the problem is not in software, i use v1.1.4, v2.0.0, unistall and install volumebooster and nothing!
Basically the only problem would be dirt clogging up the mic. wholes ... A hardware problem could be solved by opening up the iphone, and changing the mic. This wouldn`t be too hard for a skilled person, try GSM repair shops. And tell your friends to buy louder phones :)) Cheers !
-
When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?
yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.
Maybe you are looking for
-
FTP command using File adapter
Hi, When i use the file adapter in FTP mode i need to add an xtra command before sending the file. I.ex: SITE LRECL=84 RECFM=VB WRAPRECORD Using manual connect i do this ftp 111.111.111.111. User/pass SITE LRECL=84 RECFM=VB WRAPRECORD put c: est.
-
Getting Host Name From Forms 6i (deployed in 10g AS)
Hi, I need to get the host name of client while launching my application. I am using forms6i. So I cannot use webutils.pll for the same. But in the below thread I have read that Webutil.pll has been modified to use with FORMS 6i also. Can anybody sen
-
Why does my photo look posterized when I open it in CS6?
When opening a picture in CS6, either from Bridge or just from File, open in CS6, they have this 60's posterized look on most of the picture. Settings are 8 bit, RGB, haven't changed any settings and even reinstalled CS6 over the old CS6, but still d
-
Oracle project sent for approval has been cancelled due to timeout
Hi OS RHEL 5.5 Database : 11.1.0.7 Applications R12 Oracle Project has created from the project template and has been sent for the approval has been cancelled due to timeout. Please suggest what can be done to resend it to approval to the same person
-
Lion install fail - "not enough space" - I have over 90g...?
Tried installing Lion from the app store on my Core 2 Duo iMac 2.4/1GB/250GB. Message says there is not enough space even though I have over 90gb on the hard drive. I repaired permissions, ran software update to make sure I was on the latest version