Running 10.8.4 on a MacBook ... cannot see my Xerox ColorQube 8570 printer when I push  . Driver is installed.

Please help me add my Xerox Color Qube 8570 printer. it is available by Wifi in my office and one computer already runs it well, but mine does not see it when I try to add it (push +).

What OS are you using? Your profile shows 8.6.
If you have the printers IP address open Terminal applications/Utilities and at the prompt type: ping {printerIP}. You will get a reply or failure.
Printout doesn’t look as you expected
Try resetting the printing system.
Reset Printing System
OS X Mavericks: Reset the printing system

Similar Messages

  • HT1843 hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    It isn't supposed to pair with the MacBook.  You can use WiFi to connect but not Bluetooth.  You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
    The communications are rather limited.

  • ADR3 on MacBook cannot see clients' user name

    I have just installed ARD 3.2 admin on a MacBook running 10.4.10, and it cannot access two servers on our network, one running 10.3.9 and the other with 10.4.9. Both have the 3.2.1 client installed. The admin console sees the clients but shows that they do not have ARD user names or passwords available, and so is unable to connect to clients. Yet I also have ARD 2.2 admin running on a different, older Mac (10.4.10) on the same network in another building, and it allows me to connect to these two servers without any problem. On both admin computers, I log in locally with the exact same account name (both full and shortcut names) and password, so they should be recognized the same on the client machines. Tried deleting clients from list on the MacBook, quitting, and relaunching--no effect.

    Sorry - let me start over...
    Computer 1 has internal HD, and 2 external FW HDs each with 3 partitions. When everything is fired up, I have 7 volumes mounted on the desktop of Computer 1. Computer 1 has User 1, the only account on that machine. Computer 1 is connected to Airport extreme base station via ethernet.
    Computer 2 has user 2, the only account on that machine. It is wirelessly connected to the airport extreme.
    I used to be able to connect from Computer 2 to Computer 1 using User 1's account info, and then chose one of the 7 volumes AND user 1 (total of 8 items listed) to mount on the desktop of Computer 2 as a network item. I could mount as many as I wanted.
    Now, when I apple-K to connect from Computer 2 to Computer 1 and use user 1's account info, I am presented with a list of 2 items to mount: user 1 and a folder called postfix (for which I have no permissions).
    I think this situation is exactly the same as Roastaman's problem entitled "No HD volumes, just users. What's up?"

  • Airdrop in my macbook  cannot see my iPad

    I double click airdrop in the finder but it cannot see my ipad

    Per help with Bob Timmons.
    Thank you.

  • Macbook won't boot after mavericks - how to backup to external drive and install new OS

    I have a macbook pro - mid 2011 running 10.6.8. Tried to install mavericks and now computer can't boot, constantly restarts. I've tried reinstalling twice and repaired the disk, everything is OK and reinstallation didn't work. I bought 10.8 to install- apple sent me a link via email. How do I backup the drive through an external drive, erase the current drive, and then install 10.8?

    You will have to boot from your Recovery HD:
    Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

    I have an iphone 4 and an HP Pavillion with windows 7.  I always have been able to connect my iphone to my laptop and open
    the DCIM folder and see the picture icons so I can pick the ones I want to download.  After upgrading to iOS8 I cannot see the icons after a
    few seconds of connecting the phone to the computer.  They all turn into the windows icon.
    I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred.  I don't want all the pictures I take on my computer.

    http://support.apple.com/kb/HT1808

  • Itunes cannot see the itunes music folder on my external hard drive

    I recently put all of my music on an external hard drive to free up space on my computer,
    However, when I am in itunes and trying to point the library to the music folder, itunes still cannot see it. Instead all it can see is the E drive WD Passport, and folders named autorun, WD Sync Data Wd Windows Tools.
    Can anyone tell me how I can see my itunes music folder on my external hard drive while I am in preferences, advanced, library location, change??

    I don't know enough about iTunes for Windows to help you with this. But if you post your question in the Using iTunes for Windows forum you will get help from people who know more about this.
    (This is the forum for Apple's Mac OS X web browser, Safari.)

  • SRM front end user cannot see buyer information in PO Print Preview

    Hello,
    In our SRM system, our purchasing users are not able to see the 'BUYER' information in the Print Preview screen within a PO.
    Previously, users with a requistioner role were running into the same issue, but this was resolved by added the following authorizations:
    S_USER_GRP ACTVT = 03 CLASS = *
    The purchasing users currently have access to the authorizations above, but are still not able to see the BUYER information in Print Preview.
    Any information is greatly appreciated.
    Thank you,
    CJB

    As the preview is showing info then print should be coming in same way. Try check in print properties or with other printer. In the same time try on a trace (ST01) while user is printing the PO. See if any relevant missing authorization is there or not.
    Regards,
    Arpan Paik

  • Cannot see Xanté 8300 Postscript 2 Printer

    Just upgraded to Snow Leopard from 10.5.8. Now I cannot "see" my Xante 8300 printer. I downloaded and ran the most recent Xante Driver installer, but still does not show up. I am connected via ethernet and this is a B&W Level2 Postscript printer - it is a few years old, but several thousand dollars and has very few prints on it - is there no hope?

    I was able to configure a printer category (using OTHER...) to see the Xante PPD with all its options, but I did it wrong I am sure. What I set-up now "sees" the PPD, but not the printer on the network itself?
    This is the message I get when I try to print something from this config: "Network host '' is busy; will retry in 25 seconds..." - then it just keeps searching for the printer - of course, I never told it where to find the printer since I cannot figure out how to do that?
    Any help greatly appreciated.

  • Bootcamp ŵindows8 cannot see card reader in epson printer?

    Trying to see sd card reader in epson printer when using bootcamp on my macbook air. This has always been ok on my windows laptop. I want to download photos from a sd card in the printer.

    Is the printer properly installed in Windows 8? And how is it connected to the Mac Air, by USB port?

  • Use firefox cannot open cpanel of a domain name and cannot see all image of a url when use firefoz to open that url

    Use firefox to open one cpanel of a domain name but can open at safari or IE
    Use firefox browser to open one url, all the image of this url cannot see but can see at safari or IE?
    Vivien Chan
    [email protected]

    You can use these steps to check if images are blocked:
    *Open the web page that has the images missing in a browser tab.
    *Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    *Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down through the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.com/kb/Images+or+animations+do+not+show
    See also:
    *http://kb.mozillazine.org/Error_loading_websites
    *https://support.mozilla.com/kb/Error+loading+web+sites

  • On multiperson video chats, I cannot see the video chat invitation. When it's one other person, I can. What should I do?

    What should I do? My camera lights up green, but I can never see the video chat invitation for multiperson video chats.

    I am having the same problem. I have reinstalled iTunes and I have also deleted it and reinstalled it. Same problem. You are right, it will play, although I can't see to pick something, it just plays what ever it is on.
    Please help!! This is running me insane...............
    I ran the applescript to resize it to no avail.
    I am running OS X - 10.5
    I have the latest version of iTunes (just downloaded off of the apple website)
    4GB RAM
    500GB hard drive
    Macbook Pro 2.4 GHz Intel Core 2 Duo
    This is also a new OS X install.
    Thanks in advance

  • MacBook wont start and beep "S-O-S" when I push the power button

    My wife's MacBook suddenly quit.  Was working fine one day and dead the next.  Screen is black.  No keys work. Light on charger is green, so battery seems to be charged.  White light on front is steady and not pulsing as it normally does.  When I press the power button the computer beeps S-O-S in Morse code. What's wrong?  Can I fix it myself?  Can the Genius Bar fix it or is it dead for good?  I'm sorry, I don't know what OS it's running (because it won't turn on ...) Thanks!!

    Your MacBook definitely needs service. Contact Apple using expresslane.apple.com if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

  • After downloading the app for my Note 10.1-2014, synced my Desktop bookmarks, I cannot see the 3-bar menu and when I do use my menu button it does not work.

    I have searched all the ways I know about this. I have FF V28 on my PC.
    I downloaded FF v 28.0.1 and I cannot get the 3 bar / dot menu on my Note 10.1-2014 tablet.
    All your support notes describe the possibility of using my Home button, main button and even the back button.
    Still no luck and really want to use it on my tablet.

    Hi rketek1, you may be viewing information about something other than the current release of Firefox for Android.
    When using the Knowledge Base here, if the article title doesn't mention Android, check the "Editing Tools" section in the left sidebar to make sure it specified Firefox for Android and not one of the desktop versions.
    For what it's worth, I have attached screen shots of the "3-dot" menu from a Nexus 5. "Back" is a <s>physical</s> button on the device, so it doesn't appear on the screen ''within Firefox''.

  • Cannot see my XP machine in Finder when linked thru Time Capsule

    I migrated from a Netgear Range Max to a 500g Time Capsule to make backups "easy". The backups from my MacBook seem to be going o.k. I had no trouble seeing all networked local machines before the change. Have two PCs wired with ethernet cables thru the TC, a Win 2000 box and an XP box. I can still see the PCs from each other on their WIN Network place and can see the Win 2000 box from the mac. But no matter what I've tried, I can't see the XP machine from the mac or vice versa. Interestingly, I can print from the mac to a printer attached the XP. All file sharing is set on and I completely disabled the firewalls. It would be nice to be able to move some music and pics from the PC to the mac but looks like I'll have to do it via CDs, usb disks or some other slow way if I can't do this.
    Tech support says there is no way this can happen. After 2 hours on phone they suggested I look here. Please help!

    musically frustrated wrote:
    I am trying to restore from a time capsule after installing a new hard drive.
    Suggestions?
    Boot into recovery (hold ⌘R on boot), then select "Reinstall OS X", then when prompted, transfer data from your Time Capsule.

Maybe you are looking for

  • Long Term Planning-Planning File Entry

    Hi Gurus/Friends In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then during Release+Save it is giving the Result of Planning File Entries Logically the system has suppose to give the Nu

  • Remove an Element from the Element level...?

    i have appliction and a component. i put the component to stage using the addElement(new myComponent()); i use vertical layout so you can add the component over and over by clicking the button at the application level. I just want to be able to delet

  • Need help with doing two things at once

    hey all! i'm trying to write a program where the user has twenty seconds to guess the houshold item. every five seconds the pc gives a clue, if the user manages to guess it in time, they win! else... anyway, my compiler comes up with nothing but when

  • Error report causes cd drive ejection noise

    When I send an error report to apple after an application crashes the cd drive makes that wawa noise like it is ejecting a cd. I don't see how the two are related. Can someone tell me what is going on and how to fix it? Thanks

  • ITunes won't play music videos.

    iTunes won't play music videos. Posted: Jan 14, 2008 2:23 AM Click to reply to this topic Reply email Email Hey guys, here's my problem. I had some major issues with OSX last week that a trip to the Apple Store couldn't fix. Their only advice was to