Running 2 different version of Quicktime at the same time ?

Is it possible to have two different versions of QuickTime installed on one PC at the same time ?
The reason for this is that I have been using Sony's software MovieShaker to import and work with Sony's proprietary MMV video camera format. This piece of software works with QuickTime version 5.
Now that I recently bought the iPod nano, I have installed iTunes, which of course works with a higher version of QucikTime (6+).
With this higher version of QuickTime, my video capture software does not work and vice versa, with QuickTime 5 my iTunes (and iPod nano) can not be used.
Is there a possible workaround that someone is aware of such that I can still work from one PC?
Appreciate any feedback - thanks
PC Windows Windows XP Pro Sony Movieshaker 3.1 MMV format

You can only have one full installation of the QuickTime system software but the Player is just an application and should work with later versions. So what you need to do is re-install QT 5, which you can find for Windows here:
http://www.apple.com/support/quicktime/
then rename QT Player, let say Quicktime Player5. then reinstall QT 6. This time it should ignore the renamed Player (to be safe save it off line somewhere before reinstalling QT 6). No guarantee for Windows but this techinque works fine in QT for MacOS. Hope this works for you.

Similar Messages

I seem to be running two versions of firefox at the same time help!

I seem to be running an older version and a new version of firefox at the same time. I run the new version from startup (it forgets previous tabs from last session) and this sadly does not let me use back and forward arrow buttons so its a bit useless. Strangely when I pop an email window up, the older version of firefox appears with the last few tabs I had browsed.
disabling plugins stops browser starting in new version and back and forward arrows work ok.
any help much appreciated!

You can install them both but there are a few steps to take.
When you install Firefox 4 use the custom installation option and choose a different location to install Firefox.
In order to use both versions, you need to create a new profile for Firefox 4 (Firefox stores user data in the profile). Using the same profile with different versions can cause problems. Once you create a new profile you can copy certain data such as bookmarks and passwords between them. You can also use Firefox Sync to keep the profiles synchronized. Finally, you will need to set up shortcuts to launch the correct profile for each version.
The following links show how to do this:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
* https://addons.mozilla.org/firefox/addon/firefox-sync (only needed for Firefox 3.6, it is built into Firefox 4)

How to run two versions of dreamweaver at the same time

How to run two versions of any dreamweaver at the same time?
There must be a way to do this.

east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Can I has 2 different version of flash at the same time?

I am using flash MX 2004, now I planning to install CS3 but I
do not want to uninstall MX 2004 because I has some work on it. I
afraid that after I change I cannot open my file.
Can I has 2 flash at the same time?
By the way I had installed flash player 9 from adobe website
but when I publish my swf, I cannot choose player 9 and all the swf
I has is in player 7 format. How can I change it? ( I cannot find
the player 9, I am sure I had installed )

You can have both versions at the same time. You can open MX
2004 files in CS3, as you may know, but not the other way around.
In addition, without Flash 8, you'll not be able to save backwards
to MX 2004 because Flash only saves back one version at a time. So,
you can save back to 8 from CS3, open it in 8 and save back to MX
2004 so long as you didn't have any features in your movie that was
specific to the newer versions.

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

How can I run both versions of Firefox at the same time?

Alright, so I decided to install the Firefox 4 beta 3 as a test sort of thing. But now it's set as the default browser, and, no matter what I do, I can't switch back to the old one! I can't use any of my old add-ons now!

If you are want to test pre-release versions of Fiefox it is best to use a different profile for each version, and then create shortcuts to launch Firefox using the correct profile for each version. Firefox store user data in profiles, pre-release versions of Firefox can make changes to the profile that cause it not to work in older versions of Firefox.
Some articles that can help you from the MozillaZine knowledge base:
* [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows Creating a new Firefox profile on Windows]
* [http://kb.mozillazine.org/Shortcut_to_a_specific_profile Shortcut to a specific profile]
* [http://kb.mozillazine.org/Starting_your_Mozilla_application_with_a_specified_profile Starting your Mozilla application with a specified profile]
Some further background reading:
* [http://kb.mozillazine.org/Testing_pre-release_versions Testing pre-release versions]
* [http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox Using multiple profiles]

Can you run different processors in G5 at the same time

Hey, I have a G5 dual processors, one 1.8 top and 2.0 bottom.
Can I run them together in a G5?
Both work properly.
Thanks

Well, I found out, in one way it works, but ultimately doesn't.
With a 1.8 in the top and 2.0 in the bottom, the computer boot up to the startup hard drive but the fans amped up, I assume to avoid overheating.

In windows how do we install and activite multiple versions of tuxedo at the same time ?

Hi All,
In windows how do we install and activate multiple versions of tuxedo at the same time ?
Advance wishes

You can run different versions of Tuxedo on the same server, as long as they are installed in different directories.
See PeopleTools 8.53 installation manual Task 3-1: Installing Oracle Tuxedo
You can install Oracle Tuxedo once for each release on a machine, regardless of the number of PeopleSoft
applications or databases the server supports. For example, if you are a PeopleSoft 9.1 customer and have
Oracle Tuxedo 6.5 installed, you may install Oracle Tuxedo 6.5 and Oracle Tuxedo 11gR1 on the same
machine in separate directories. For example:
On Windows, you may install into C:\oracle\tuxedo11gR1_VS2010 and C:\tux65.
On UNIX, you may install into /home/oracle/tuxedo11gR1 and /prod/tuxedo/6.5.
E-TUX: Can Multiple Versions of Tuxedo Coexist on One Physical UNIX or Linux Server? (Doc ID 607828.1)

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Run 2 versions of FF on the same computer

Is it possible to run 2 versions of FF on the same OS

Yes it is possible, don't use the same profile, and you will have to use "-no-remote" on the one that is not your default browser and/or not your default profile.
Start reading at:
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
A picture map of how I can start them
*http://dmcritchie.mvps.org/icons/win7_quicklaunch_large.png
*http://dmcritchie.mvps.org/windows-7/win7.htm
*http://dmcritchie.mvps.org/windows-7/win7.htm#quicklaunch
*http://dmcritchie.mvps.org/firefox/quicklaunch.htm

Can we run 2 versions of Apex on the same Oracle database ?

Can we run both Apex 3.1 & Apex 4.0 versions on the same database ?
Instead of upgrading my 3.1 to Apex 4.0, I wanted to know if I can run 2 versions of Apex on the same database simultaneously

Hello,
>> Can we run both Apex 3.1 & Apex 4.0 versions on the same database ?
No you can’t. The APEX 4.0 installation script will automatically detect the 3.1 instance and it will be upgraded.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Error Running Oracle Apps and Discoverer at the same time

Hello,
We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
Thanks in advance for your help,
Carlos

Hi Michael,
I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
I should have put my comment in context :-)
a.) I was only stating that it was possible
and
b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
I would be glad to discuss anything privately.
As for the issue at hand, I can reproduce the problem and here is what is occuring.
I have EBS 11i configured with Jiniator 1.3.24
I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
a.) Sun Java Plugin or
b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
then you may get this conflict.
It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
You can workaround the situation by:
a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
See:
http://blogs.oracle.com/schan/2006/04/18#a23

HT1442 install and run mac os 10.4 at the same time mountain lion 10.8

nstall and run mac os 10.4 at the same time mountain lion 10.8

I was able to install Intel Tiger into VMWare Fusion 2.0; I was never successful at installing it in VMWare Fusion 4.
If you have had success in version 4, please let us know how to do it! Thanks!

Running Reports 6i and 9i at the same time

I was wondering what the issues were with running Reports 6i and 9i at the same time. We are planning on up grading at a client, and I heard that there are some problems with doing this. I was thinking that installing them in different ORACLE_HOME's would help keep problems to a minimum. At home I have Reports 6i and 9i running, and I have not seen any problems.

We suggest you install 6i and 9i at different oracle home. There are no known issue about running 6i and 9i at the same time.
Thanks,
-Shaun Lin

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

Running 2 different version of Quicktime at the same time ?

Similar Messages

Maybe you are looking for