Running 2 Versions of Novell Messenger Side by Side
We are attempting to run Messenger 2.2 (Production) and Messenger 3.0 (Development) Side by side, so that we can test the new version, without removing the test group's ability to talk to the users on our current production messenger server. I thought that creating a virtual app for 3.0 would be a good solution, as we have used virtualization to run applications side by side in the past.
This does not appear to work however. I have tried doing this with one version installed, and one virtualized, and with both virtualized, but the result is the same: Whatever version is run first becomes the functioning version. Attempting to run the second version just brings the other version up. It would seem that they are sharing some protocol..
Is there a solution for this? Has anyone had two versions of messenger running together?
Thanks
You can run the two clients, connecting to two different servers, both on 8300.
Thanks for the windows class isolation tip...forgot about this, and that's exactly what I needed.
Originally Posted by dholmesscsd
I'm guessing you couldn't have both running simultaneously unless you could configure the beta Messenger server to communicate on a different port but that's just a guess on mu part. Make sure the "Enable window class isolation" option is checked under "Settings
|Process Configuration" in ZAV when you build the app.
Similar Messages
-
Hi, I am administering a cutover from Office Pro 2010 to Office Pro 2013 via our Office 365 E3 licenses. Before I start migrating mailboxes from our Exchange 2003 server to Exchange Online, I want to have our staff install Office Pro 2013 including Outlook
2013 so they can have time to review it before we switch to the Exchange Online server in a couple of days. I know Outlook 2013 is not compatible with our Exchange 2003 server but I was hoping to be able to setup Outlook 2013 to connect to my Office 365 email
address while keeping my msi installed version of Outlook 2010 for my Exchange 2003 email address.
I am trying to test the capability of Outlook 2013 running side-by-side with my Outlook 2010 program. I have the "Click-to-Run" version installed on my Windows 7 64-bit machine however when I try to open Outlook 2013, I get an error message: "Another
version of Outlook is currently running. Close it and try again."
In reading in TechNet and other sources, it clearly states that both programs can run simultaneously which is what I need to do
but obviously something is not configured correctly.
Can you please help me get this configuration running or let me know if it is in fact not possible?
Thanks!
FrankYes, it should be able to install side by side.
The versions of Office that you install must be the same edition. For example, both installations of Office are the 32-bit edition.
When you get the error
"Another version of Outlook is currently running. Close it and try again.", go to task manager and end all existing
outlook process.
If the issue persists, do a repair for your Office suites in Control panel>Program and features>Office>Change>Repair
Thanks,
Tyor Wang
Forum Support
Come back and mark the replies as answers if they help and unmark them
if they provide no help.
If you have any feedback on our support, please click
here -
My MacBook pro continues to be very slow after downloading Yosemite. It keeps referring to MacBook Pro (2). It's like there are two version running side by side. Any ideas?
It is now running Yosemite 10.10.1. I seem to have plenty of memory but the machine still runs slower than before installing Yosemite. Excel has a very noticeable lag when opening and loading files.Hi,
Thanks for the reply. I ran through the various steps as suggested including resetting the SMC.
I would say that there was about a 10% improvement. Although one of the icons still bounced for the count of 40
I'm still wondering why from the About this Mac, then System Report. it refers to my name MacBook Pro (2).
All the various problems seem to have started with the upgrade to Yosemite. -
Anybody running both versions? Is this possible?
I found some information about migrating from a previous version in the release notes/install guide but did not see anything about running side by side.
Thanks.Yes, you can, if you run and work with them independently, ie. you don't share projects between each version.
If you intend to do this you must be aware that each version has its own understanding of the format of the .jws and .jpr files and might want to convert them.
Also be aware that ADF BC could not be shared between JDev versions.
You can even share the project codes by having .jws and .jpr files for each JDev version in use you could even share the same.
--olaf -
I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!
BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host> -
Can CS6 Design Standard run side by side on a PC (Win 7) with CS5 Design Standard, or must CS5 be un-installed first?
All versions of Adobe apps install into their own separate folder.
You can run CS5 and CS6 side by side. -
How can i get two videos to run side by side?
i am just wondering how to get more than one video (4 preferably) to run side by side all at the same time? thanks
Hi there. I'm new to the iMovie app but I this link should help:
http://help.apple.com/imovie/mac/10.0/?lang=en#movb8c659f55 -
How to view one photo with one XMP based adjustment side by side with another XMP version?
Hi,
I was wondering if there is a simple way of quickly and easily comparing side by side the same photo that may have different adjustments made to it.
I do some freelance work where in one job I receive up to 800 images to edit. After my work is complete I send the XMP files back to my boss. He may or may not further tweak them for correctness. He then sends these files to the client.
I want to compare the original XMP files I sent against the final XMP files that the client receives to see what changes were made. My boss can't remember exactly which files he tweaked so I wanted to do that visually.
Is there an easy way to do this in Bridge? Can I quickly switch the adjustments from one set of XMPs to the other, or better yet, view the same image side by side with different adjustments applied to them?
Thanks!
ZLeung1980Is there an easy way to do this in Bridge? Can I quickly switch the
adjustments from one set of XMPs to the other, or better yet, view the same
image side by side with different adjustments applied to them?
As far as I know you can't see different versions of the same file in
Bridge, I think you can do so in Aperture ;-0
The easiest way I can think of is to have two sets of files by duplicating
the current series you have tweaked. The duplicates have copy in the
filename but will stay in the correct order when having file name selected.
The duplicates stay as you have them tweaked, the originals will be modified
with new XMP as you get them back.
Choose sort by modification date to select the files with modified xmp data
and color label those. Again choose all the content with sort for filename
and you can easily see the color labels next to the original duplicates.
Select both one modified and one original and view them next to each other
in the preview window.
Maybe others have a better method? -
How do I have two apps running side by side i.e. calculator
How can i have x2 apps running side by side ie notebook & calculator without going back & forth.
I have tried several browser type apps but these have not been very succesfull.
My daughters samsung does this no problem at all.
Does anyone no why it seems so hard to acheive especially after all the updates ect since launch.
Probably going to go down samsung route.
Dave7 month old thread, probably by this time OP already has a Note.
As for the rest of us, we did understand. Kappy answered correctly that it could not be done. Its jus not something iOS is programmed to do.
We then gave some alternatives. no one suggested it was what the OP wanted to do. Just something that could be done to approximate the requirement.
If that doesn't work for you, then there's nothing else that can be done.
Its not a currently supported feature on iOS. You can offer the suggestion to Apple on their feedback page.
http://www.apple.com/feedback/
There's nothing wrong with buying a different product that fits your needs more than an iPad.
Its like tryng to take a Sedan offroad. Was it built to do that? No. Can it, probably limitedly but the experience is not going to be very pleasant. Buy an Offroad vehicle and you can go offroad just fine. You don't whine because the sedan can't do it. You get something that can. -
Feature Request : Side by Side apps running in 2 windows.
Having 2/more apps running side by side. Should have a view&use of running apps in a window view. This feature will enable to chat with some one and may be compose a mail or play a game or check a news article.
Isn't it useful? May be in next iOs5 ..?This is a user forum. If you would like to submit a suggestions to Apple, try here:
http://www.apple.com/feedback/ -
Webcenter Application Version/ Side by Side deployment
Hi,
I have created a webcenter portal application and deployed to weblogic.
The application version is always set to V2.0.
How do you change this version?
I create the ear file manually using jdeveloper and can see no entry in the deploymnet descriptor and deploy via Enterprise Manager, where the option to edit the version is not available.
I have tried to introduce a MANIFEST.MF file with the following entry:
Manifest-Version: 1.0
WebLogic-Application-Version: V1.0
But this does not get picked up either.
I am trying to test SIDE by SIDE deployment? is this even achievable with Webcenter applications?
Any help/ advice welcome.
ThanksHi.
You probably forget any step.
Basically i followed this steps to install V7.0 app:
- Created WebCenter Portal Application (JDev 11.1.1.6).
- In Application Root folder/META-INF (same folder as jazn-data.xml...) i created a MANIFEST.MF with V7.0
- Changed EAR Deployment profile in Application Properties changing:
1) In "File Groups -> Application Descriptors -> Filters". Uncheck MANIFEST.MF
2) In "EAR Options" check Include Manifest Files to MANIFEST.MF and add your recently created MANIFEST File.
- Deploy your Applications as EAR file.
- Deploy in WebLogic through Enterprise Manager or deploy directly from JDeveloper.
Regards. -
How do I compare adjusted image side-by-side with un-adjusted version?
Sorry if this seems very basic. I tried A3 Help and I did a quick search in this forum. In Lighthouse, there is a simple button, very intuitively designed to generate a side-by-side comparison showing how the adjustment would look.
Create a new Version, select in the Browser the two images you want to compare, and double-click one of them to entire Viewer or Split view.
There are many relevant settings, views, and workflows -- what these do and whether you want to use them will become apparent as you get used to Aperture.
There is a setting in prefs to create a new Version for all adjustments.
"m" toggles Master image view on/off for all currently displayed images. In the Viewer, this can be helpful, but it does not show you a simultaneous side-by-side view.
The most important thing to know about Versions is that they come with almost no computer overhead -- use as many you want, as often as you want (to, for instance, compare adjustment sets).
Sorry if this seems very basic.
No apology necessary. Aperture can be quite alien to the new user. Ask away (but thanks for checking the Help file -- and the forum -- first).
Message was edited by: Kirby Krieger -
Issues installing full version of 5 side by side with 4?
To avoid potential issues, I'd like to install the full version of Captivate 5 side by side with Captivate 4,
This allows me to avoid upgrading existing courses written in 4, when changes need to be made.
New courses will be created in 5.
Are there any issues getting both to work side by side?
In other programs, I've encoutered errors when different versions of the same program are installed
due to shared code or interactions with other progs. One or the other suffers. Will I encounter similiar issues?
( I'm aware that once a captivate file is in 5 format, it can't be openned in 4.)
Thanks for your reply
-JoanHi Joan,
I have both Captivate 4 and Captivate 5 installed on my laptop(XP SP3) and they both seem to work without any issues. So i would say go ahead ....
Manish
blogs.adobe.com/captivate -
Cannot run Photoshop CS5.1 setup; "side-by-side configuration is incorrect"
When I try to install Photoshop CS5.1 Extended, I get an error message that reads "The application has failed to start because it's side-by-side configuration is incorrect. Please see the application event log for more detail."
Is there a way to fix this (and if so, what is it), or should I just try to get a new copy?I received this message when invoking the installer.
I actually tried just reinstalling Microsoft Visual C++ 2005, like right after i made this ticket and that worked. so, problem solved -
"failed to start... side-by-side configuration is incorrect'
Running Vista Ultimate 32-bit. When I try to start DW CS4 or
Fireworks CS4 I get the following message:
"The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log
for more detail."
Checking the event log, the entry shows this:
"Activation context generation failed for "E:\Adobe\Adobe
Dreamweaver CS4\Dreamweaver.exe". Dependent Assembly
Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="wi n32",version="8.0.50727.762"
could not be found. Please use sxstrace.exe for detailed
diagnosis."
I found a couple of KB articles, one of which suggested
installing the VC++2005 runtime, which I did, and the other the
VC++2008 runtime, which I also did. No joy.
Oddly enough, all of the non-Web-related apps in Design
Premium that I've tested are working. I can launch PS, AI, ID,
Bridge, Acrobat Pro, etc. But DW, Fireworks, and Flash Pro won't
launch.
I've Googled this, to no avail. When I try to run a forum
search on the topic I get a server error asking me to contact the
site admin. Right.
Anybody got any ideas?
cheers,
scottThanx man, you are the best!
I mistakenly found an easier solution to this problem.
I had exactly the same problem with DW. I actually solved
this issue by mistake, but without reading your post I would'nt
have known it's possible!
Here's what happened:
With no connection to this issue I downloaded and installed
Windows Live Messenger, and in the installation info I see it
includes the VS installation! Since you said re-installing VS
solved your problem, I uninstalled DW and then allowed the
Messenger installation to continue - and in the next time I
installed DW it works perfectly!
So I guess you don't need to uninstall the VS, only install a
new version of it.
Tanx again!
Maybe you are looking for
-
Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit
This is related to another discussion that had a solution of using an unofficial 64-bit Apache, which is not permitted in my situation. The discussion is here: http://forums.adobe.com/message/3580001. I'm having trouble running the Apache and ColdF
-
Problem in modifying the existing record in table control
Hi Experts, I have one table control.I have entered one record and save it.When I am modifying the same record a duplicate record is created.I need if I modify the same record that record should only modify.How to delete the duplicate record.
-
My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?
-
Hello Guys, I have MARS ver 6.0.4 and I want to upgrade to the latest. From what I read I see that I need to upgrade to 6.0.5 than -> 6.0.6 -> 6.0.7 .. Is there a way to upgarde directly to the latest one 6.2.2 ? Thanx, Kfir
-
When I import my footage a choose to create proxy media. However when I create a munticam project and change preferences to use proxy media it says its missing. I've got to be doing something wrong!!