Running a Hyper-v vm inside a Windows 8.1 VM

Hello,
I have a Windows 8.1 VM running in a Hyper-v 2012 R2 failover cluster. I need to run a Windows 7 VM inside the Windows 8.1 VM.
Can I do that? If so, how can I do this?
Thanks in advance
dmsousa

Glad that you have seen it with other hypervisors. It will not work on Hyper-V in this configuration.
There is no way around it.
The exact same situation exists with xen / SenServer / OracleVM - and for an extremely similar architectural reason.
Hyper-V and xen do not emulate the physical layer. As ESX and VirtualBox do. Thus the VM inside of the nested Hyper-V Server has no CPU resource to bind to as it has absolutely no access to the physical processor virtualization extensions.
Could this be changed? Possibly, who knows. But that does not represent the current situation.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Similar Messages

Ubuntu running under Hyper-V with high load

I'm running a VM for Ubuntu Server 12.04 LTS under Hyper-V and with no web server or any other public server installed, the system load is 1.0
The VM is using a 75GB fixed VHD on its own partition (the hard drive is using raid 0).
Is this normal for running a linux OS under Hyper-V?
Here's what top shows (i restarted the vm for fresh numbers, but it still shows a load of 1.00 even after its been running for a day):
top - 16:58:17 up 23 min, 1 user, load average: 1.00, 0.58, 0.24
Tasks: 235 total,   1 running, 234 sleeping,   0 stopped,   0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 98.8%id, 1.0%wa, 0.0%hi, 0.2%si, 0.0%st
Mem:   4040336k total,   870384k used, 3169952k free,    13232k buffers
Swap: 7812092k total,        0k used, 7812092k free,   225396k cached
The host OS is running Windows 2012 R2 and it too isint running anything else that would put a lot of load on the server.

Hi Sir,
        The following daemons must be installed manually for Ubuntu distributions:
VSS Snapshot daemon – This daemon is required to create live Linux virtual machine backups.
KVP daemon – This daemon allows setting and querying intrinsic and extrinsic key value pairs.
To install both daemons, please use the following command:
Copy
# sudo apt-get update
# sudo apt-get install hv-kvp-daemon-init
# uname –r
<kernel release>
# sudo apt-get install linux-tool-<kernel release>
# sudo apt-get install linux-cloud-tools-<kernel release>
Please refer to note 5 , 9 within following article :
https://technet.microsoft.com/en-us/library/dn531029.aspx
As for linux VM running on hyper- v, I would suggest you to try to get further assistance from this forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices&filter=alltypes&sort=lastpostdesc
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Hyper-V as User on Windows Embedded 8.1 Industry Pro

I believe I'm having permission issues when attempting to use Hyper-V on Windows Embedded 8.1 Industry Pro. Hyper-V seems to install cleanly, and from an admin account I can use the Hyper-V Manager without issue and connect to a running VM. However
if I attempt to use the Hyper-V Virtual Machine Connection application from the same account, it reports "You do now have the required permission to complete this task..." And attempts to run either the Manager or the Virtual Machine Connection result
in the same on a standard user account.
Standard wisdom seems to be to add the user account to the "Hyper-V Administrators" group but when I've looked in the Computer Management utility and the group "Hyper-V Administrators" does not exist. I've tried manually adding full
permissions to the WMI interfaces for CIMV2, StandardCimv2 and Virtualization namespaces through the WMI Control Properties interface. I've also added the user to the "Administrator" role for Hyper-V services in AzMan as a long shot. Beyond
this, I'm not sure where to go next.
The end goal is to be able to run the Hyper-V Virtual Machine Connection Utility from a non-administrative user. Any advice is appreciated.
-Matthias

Your question might be more general to Hyper-V and not specifically embedded. WE8.1 is Windows 8.1 with lockdown features so there is nothing special. Account level (Administrator vs. non-administrator) does effect what permissions are granted to access
certain OS features.
Maybe the Hyper-V forum can address the account level -
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

2008 R2 server running off Hyper V is reverting changes made by users to directories/ files that are moved.

We have a Windows 2008 R2 file server ( running off hyper V)
It has intronis and backup exec installed for backups.
Users are creating folders on the server and moving files, and sometimes ( not every time but about 20% of the time) the changes they made/ folders they setup will be gone and the files are back in the original directory they were in the day before.
There are some NTFS errors ( Event ID 55) that say to run a chkdsk,
which we have done ( chkdsk /r )
But we are still having the problem.
Should we just replace the drive? There is not much on google about this type of problem anyone run into anything like this before?
Thanks for any suggestions.

Hi,
Do you restore the drive from backups? Do all the folders and files have the same issue in the drive or only some specific folders and files? Does the issue occur instantly?
You could refer to the article below to troubleshoot the event ID 55 error.
EVENT ID 55: When Good Bits Go Bad
http://blogs.technet.com/b/askcore/archive/2012/05/09/event-id-55-when-good-bits-go-bad.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Is it normal for OS X running on many .exec files inside system library

Is it normal for OS X running on many .exec files inside system library?
Because my Mac getting slower.

Please post a screenshot that shows what you mean.
To take a screenshot, follow the instructions linked below. Be careful not to include any private information.
Shortcuts for taking pictures of the screen
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

How to verify if backups are set up and running on Hyper-V with Ubuntu 12.04 on vm ?

I have Windows Server 2008 R2 with Hyper-V installed and Ubuntu 12.04 running on a VM.
I would like to be able to verify if Windows Server Backups are in fact backing up the Ubuntu VM.
From within Hyper-V Manager no snapshots appear for the VM.
I have done a lsmod on Ubuntu to verify if LIS is installed , this is the output:
Module                  Size Used by
vesafb                 13844 1
joydev                 17693 0
hid_hyperv             13164 0
hid                    99559 1 hid_hyperv
mac_hid                13253 0
psmouse                87603 0
serio_raw              13211 0
i2c_piix4              13301 0
lp                     17799 0
parport                46562 1 lp
hv_netvsc              22939 0
hv_utils               13540 0
hv_storvsc             17896 2
hv_vmbus               34543 4 hid_hyperv,hv_netvsc,hv_utils,hv_storvsc
floppy                 70365 0
A ps -ef outputs this:
root       217     2 0 2013 ?        00:00:00 [hv_vmbus_con]
root       218     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       219     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       220     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       221     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       222     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       223     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       224     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       225     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       226     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       227     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
(not the entire output, just what I think is relevant)
When checking the registry on Server 2008 I cannot find the key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WindowsServerBackup\Application Support\{66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
as described how to setup in this link: http://support.microsoft.com/kb/958662
From what I can gather VSS will be able to run without the need to shutdown the Ubuntu VM but the backups are not running when Windows Server Backups run?
How can I verify IF any backups of the VM have run successfully at all?
I am new to Hyper-V - but from what I can see , it seems that no VM backups are running . The normal Windows Server backups are running nightly. I would like them to run together without having to restart/ take offline/reboot the VM.
This is a production server and I need to avoid rebooting as much as possible-

Hi Sir,
        The following daemons must be installed manually for Ubuntu distributions:
VSS Snapshot daemon – This daemon is required to create live Linux virtual machine backups.
KVP daemon – This daemon allows setting and querying intrinsic and extrinsic key value pairs.
To install both daemons, please use the following command:
Copy
# sudo apt-get update
# sudo apt-get install hv-kvp-daemon-init
# uname –r
<kernel release>
# sudo apt-get install linux-tool-<kernel release>
# sudo apt-get install linux-cloud-tools-<kernel release>
Please refer to note 5 , 9 within following article :
https://technet.microsoft.com/en-us/library/dn531029.aspx
As for linux VM running on hyper- v, I would suggest you to try to get further assistance from this forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices&filter=alltypes&sort=lastpostdesc
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Hyper-V replica for a Windows 8 VM possible?

Hi,
I plan to maybe run 2 VMs on Hyper-V. Windows Server 2012 R2 Essentials and Windows 8.1 Pro. I plan to use a second server with hyper-V free on it. We'll make replicas on it.
I know I can use Hyper-V Replica to make a replica of the Windows Server VM every 5 minutes on the second server. Can we do the same for the Windows 8.1 Pro VM?
Also Can we use the Hyper-V server included with Windows Server 2012 R2 Essentials to replicate on a Hyper-V free server? Are they compatible? Or should we use 2 Hyper-v free servers so they are more compatible?

Hi ,
" Can we do the same for the Windows 8.1 Pro VM? "
I think you can replica the client VM to another hyper-v host on technical level .
But it may involve a licensing issue , for this configuration please contact to MS activation center for further assistance :
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Loading Hyper-v devices drivers for Windows XP Task Sequence

I'm trying to create a Windows XP reference image using SCCM 2007 R3 with MDT 2010. XP installs and boots up but video, mouse, etc do not load. NIC is working so no network issues. When XP comes up I can't use the mouse
(a huge pain). From hyper-v client I can ""Insert Integration Services Setup Disk" but first, I have to close all the pop-up windows for "unknown devices". Since I don't have a mouse, it is difficult close those windows.
Can someone please advise how to load the hyper-v devices I have tried to make a package of the "vmghost.iso" then run "setup.exe /quiet /norestart" but this task fails in the task sequence.

Hi,
Please go to see if it is configured properly:
Installing
Hyper-V integration components in Windows XP when building reference image
You may also refer to the steps in the following article:
Creating
WinPE with Integration Services for Hyper-V
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

Dear,
I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
Virtual Machine 1 2048MB
Virtual Machine 2 4096MB
Location D:\VM\
I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
Example:
It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
I think it must be something with
$hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
Can you help me or do you have a script for this?

Juste use :
$vram = 1GB*$vRam
You not need the "
Do you have any error with the creation of the VM?
# Variables
$VMName = Import-Csv "C:\HyperV\input.csv"
$VHD = 40GB
$VMLOC = "C:\HyperV"
$vSwitch = "External"
$ISO = "C:\ISO\WinServer2012R2.iso"
$LocationCode = $env:COMPUTERNAME.Split("-")[0]
# Create VM Folder
MD $VMLOC -ErrorAction SilentlyContinue
Foreach ($VM in $VMNames)
$Name = $VM.name
[int64]$vRam = $vm.vram
$vram = 1GB*$vRam
$VMName = $LocationCode+$Name
# Create Virtual Machine
New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
Error message
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

Error While opening a JSP page from inside form window

Hi,
I am using Oracle EBS 12.0.4 and using IE 7 as my browser.
Now when i am trying to open a jsp page form EBS Home page (after login) it is opening perfectly.The problem occurs when i tried to open jsp pages from inside form window.
E.g. From the home page when i tried to open a jsp page "Control Purchasing Periods" which is assigned in one of our custom responsibility(Manager Systems-->PO Super User-->Set up-->Financials-->Accounting-->Control Purchasing Periods) it opens a new log in page for the EBS. When i logged in it is showing
Error
You have insufficient privileges for the current operation. Please contact your System Administrator. Same is happening when i am trying to open User Page form user management responsibility from inside a form window.Where as it is opening fine from home page.
Please help.

Hi, hueesin
in error log i got this 4 new lines while performing the transaction from my host
[Thu Dec 30 13:27:39 2010] [error] [client 172.16.6.144] [ecid: 1293695859:172.16.48.61:25634:0:8748,0] Directory index forbidden by rule: /dev02/KMCTEST/apps/apps_st/comn/java/classes/
[Thu Dec 30 13:27:40 2010] [error] [client 172.16.6.144] [ecid: 1293695860:172.16.48.61:25328:0:8829,0] Directory index forbidden by rule: /dev02/KMCTEST/apps/apps_st/comn/java/classes/
[Thu Dec 30 13:28:06 2010] [error] [client 172.16.6.144] [ecid: 1293695886:172.16.48.61:25654:0:9225,0] File does not exist: /dev02/KMCTEST/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_IN.class
[Thu Dec 30 13:28:06 2010] [error] [client 172.16.6.144] [ecid: 1293695886:172.16.48.61:25654:0:9226,0] File does not exist: /dev02/KMCTEST/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_IN.propertieswhile in access log i got
172.16.6.144 - - [30/Dec/2010:13:32:51 +0530] "POST /OA_HTML/OA.jsp?page=/oracle/apps/fnd/sso/login/webui/MainLoginPG&_ri=0&_ti=587084970&language_code=US&requestUrl=http%3A%2F%2Fkmctapp2.kmc.com%3A8005%2FOA_HTML%2FRF.jsp%3Ffunction_id%3D2014%26resp_id%3D50670%26resp_appl_id%3D7000%26security_group_id%3D0%26lang_code%3DUS%26params%3Df7B5hnH8rkFfR.idy0MT1JZrquJxVBy3CVpSV.GpXc0%26oas%3DAuZa28Bnhl7glqYyqXbjsg..&cancelUrl=http%3A%2F%2Fkmctapp2.kmc.com%3A8005%2FOA_HTML%2FAppsLogin&langCode=US&oapc=2&oas=rucHEnmoEQ25-3xRNnl0ZA.. HTTP/1.1" 302 708 1 "http://kmctapp2.kmc.com:8005/OA_HTML/RF.jsp?function_id=28636&resp_id=-1&resp_appl_id=-1&security_group_id=0&lang_code=US&params=Br702.NFW.nrlg1EodytbsK-Dc1k9ERgGeColziC.cPOIi7hiyjaPiR6AJ7.Lk4IUbiFt8MZ-sww1yPk9nLXIYqdPHfttMeywkt5IQhVsrG8Y9M-0CrrcAU8ZntmtaFjlkc2vXbUaot6TQpdqAPHJyaJn6YLsew516hhfiB2xemOmo6e-.WpPrlXfvBQG.XVr-Z8y-V4uRkwwHgWHTK.ju6jLsF35BmqTRszq39cgoHe38QZqjtonDRWgTFzvxooOAmX1EHPfxfMz88uKnVWnnzU-4996ZD8e3X0Dagp19gjOYgefJlT1fTUaFvMo3cP.-7Ypt0s4Cck.GhdFOnHRK1Ok6KdvnjFyjK-WHCy4ZHCvw3NZPREYBngqJc4gvnDziIu4Yso2j4kegCe-i5OCFG4hbfDGf7MMNcj5PZy1yFwJ8GIMHyNmCAg9Yo1bXn5cTHOy7xYWHyOD5.ax3JG6Q&oas=W0vxAqkroMB_7DgeNPZhYw.." "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"
172.16.6.144 - - [30/Dec/2010:13:32:51 +0530] "GET /OA_HTML/RF.jsp?function_id=2014&resp_id=50670&resp_appl_id=7000&security_group_id=0&lang_code=US&params=f7B5hnH8rkFfR.idy0MT1JZrquJxVBy3CVpSV.GpXc0&oas=AuZa28Bnhl7glqYyqXbjsg.. HTTP/1.1" 200 7534 0 "http://kmctapp2.kmc.com:8005/OA_HTML/RF.jsp?function_id=28636&resp_id=-1&resp_appl_id=-1&security_group_id=0&lang_code=US&params=Br702.NFW.nrlg1EodytbsK-Dc1k9ERgGeColziC.cPOIi7hiyjaPiR6AJ7.Lk4IUbiFt8MZ-sww1yPk9nLXIYqdPHfttMeywkt5IQhVsrG8Y9M-0CrrcAU8ZntmtaFjlkc2vXbUaot6TQpdqAPHJyaJn6YLsew516hhfiB2xemOmo6e-.WpPrlXfvBQG.XVr-Z8y-V4uRkwwHgWHTK.ju6jLsF35BmqTRszq39cgoHe38QZqjtonDRWgTFzvxooOAmX1EHPfxfMz88uKnVWnnzU-4996ZD8e3X0Dagp19gjOYgefJlT1fTUaFvMo3cP.-7Ypt0s4Cck.GhdFOnHRK1Ok6KdvnjFyjK-WHCy4ZHCvw3NZPREYBngqJc4gvnDziIu4Yso2j4kegCe-i5OCFG4hbfDGf7MMNcj5PZy1yFwJ8GIMHyNmCAg9Yo1bXn5cTHOy7xYWHyOD5.ax3JG6Q&oas=W0vxAqkroMB_7DgeNPZhYw.." "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"
172.16.6.144 - - [30/Dec/2010:13:32:51 +0530] "GET /OA_HTML/cabo/images/swan/t.gif HTTP/1.1" 304 0 0 "http://kmctapp2.kmc.com:8005/OA_HTML/RF.jsp?function_id=2014&resp_id=50670&resp_appl_id=7000&security_group_id=0&lang_code=US&params=f7B5hnH8rkFfR.idy0MT1JZrquJxVBy3CVpSV.GpXc0&oas=AuZa28Bnhl7glqYyqXbjsg.." "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"
172.16.6.144 - - [30/Dec/2010:13:32:51 +0530] "GET /OA_HTML/cabo/images/swan/errorl.gif HTTP/1.1" 304 0 0 "http://kmctapp2.kmc.com:8005/OA_HTML/RF.jsp?function_id=2014&resp_id=50670&resp_appl_id=7000&security_group_id=0&lang_code=US&params=f7B5hnH8rkFfR.idy0MT1JZrquJxVBy3CVpSV.GpXc0&oas=AuZa28Bnhl7glqYyqXbjsg.." "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"
172.16.6.144 - - [30/Dec/2010:13:32:51 +0530] "GET /OA_HTML/cabo/images/swan/navBarUnderTopTabsBg.gif HTTP/1.1" 304 0 0 "http://kmctapp2.kmc.com:8005/OA_HTML/RF.jsp?function_id=2014&resp_id=50670&resp_appl_id=7000&security_group_id=0&lang_code=US&params=f7B5hnH8rkFfR.idy0MT1JZrquJxVBy3CVpSV.GpXc0&oas=AuZa28Bnhl7glqYyqXbjsg.." "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"
172.16.6.144 - - [30/Dec/2010:13:32:51 +0530] "GET /OA_HTML/cabo/images/swan/footerBg.gif HTTP/1.1" 304 0 0 "http://kmctapp2.kmc.com:8005/OA_HTML/RF.jsp?function_id=2014&resp_id=50670&resp_appl_id=7000&security_group_id=0&lang_code=US&params=f7B5hnH8rkFfR.idy0MT1JZrquJxVBy3CVpSV.GpXc0&oas=AuZa28Bnhl7glqYyqXbjsg.." "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"

How can I run a labview executable file inside a VI

How can i add and run a labview executable file inside the vi and grab the output of the executable file to be used in the vi?
mytestautomation.com
...unleashed the power, explore and share ideas on power supply testing
nissanskyline.org
...your alternative nissan skyline information site

Hi cmdrb,
to run an executable you use SystemExec function.
To get the output of your (LabVIEW-made) executable you need to program some data transfer means: you may use network functions or file functions. In both cases your "LabVIEW executable" needs to provide that options…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

I'm running iTunes 11.0.5.6 on Windows 8. When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed." What do I need to do?

I'm running iTunes 11.0.5.6 on Windows 8. When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed." What do I need to do?

Perhaps this can be of help:
http://support.apple.com/kb/TS3704
It fixed the problem for this DukeHutchens in this thread:
https://discussions.apple.com/thread/3916663?start=0&tstart=0

How to find out whether a program is running in Hyper-V virtual machine or not?

If I want to make a program which only running in Hyper-V virtual machine, how can I find out whether
the program is running in Hyper-V virtual machine or not?

https://gallery.technet.microsoft.com/scriptcenter/Determine-if-a-computer-is-cdd20473
http://social.technet.microsoft.com/wiki/contents/articles/942.hyper-v-how-to-detect-if-a-computer-is-a-vm-using-script.aspx
http://www.grouppolicy.biz/2014/01/how-to-target-group-policy-to-virtual-computers/
Mike Crowley | MVP
My Blog --
Baseline Technologies

Running a Hyper-v vm inside a Windows 8.1 VM

Similar Messages

Maybe you are looking for