RUNNING A KEYNOTE MOVIE ON A PC

My client has been specific and wants to run a 7min presentation on PC's that do not have Quicktime installed. We have managed to convert the Movie to a Windows Media File using the Bink suite of tools, but it is large (from 190Mb to 650Mb) and lacking the sound.
Any ideas?

You might try converting using the Flip4Mac Studio (US$49). I've used it to go the other direction, WMV to MOV, and it works fine.
Also, depending on the dimensions of your video, I wouldn't be surprised at the file sizes you give -- a 7 minute presentation can be quite large if the dimensions are big and the compression is relatively light. (I think the higher-end Flip4Mac products allow you to customize the compression, but if you don't want to spring for those, you can always re-compress the orginal movie in QTPro, or ffmpegX, which is free (but requires a bit of tinkering).
PowerMac G5 Mac OS X (10.4.4)

Similar Messages

Keynote movie help

i was wondering if u could insert a .mov file on a slide in keynote play the movie and keep it playing while you play through the slides?

Not sure if this would work, but a suggestion.
Instead of running the "base audio" from inside Keynote, start your audio (timed appropriately) from iTunes. Run the Keynote with the individual audio tracks as needed.
The tricky part here would be the ducking. Maybe (a long shot here) you could install Audio Hijack which allows you to add effects to different audio streams in realtime (among other features) and using the free VST plugin Sidechain/Ducking (http://freemusicsoftware.org/category/free-vst-effects-2/sidechains) you could the base audio duck using this method. Never tried this but could be something for you to look into.

How can I run a keynote presentation in full screen mode ?

How can I run a keynote presentation in full screen mode?

Keynote runs in full screen by default when you click the Play button in the toolbar. If you want the slides to fit the display area, check the box next to "Scale slides up to fit display" in Preferences...

When I try to run my keynote presentation through a projector, it fails to fun as desired and instead show the "Rehearse Slideshow" view instead. How do I sort this out?

When I try to run my keynote presentation through a projector, it fails to fun as desired and instead show the "Rehearse Slideshow" view instead. How do I sort this out?

I believe you need to go into System Preferences > Displays > Arrangement so the image you want appears on the projector.

Poor resolution for Keynote .mov file

Hello,
Just getting started with Keynote. I'm putting together courseware and will be using Keynote to support the presentation. I have several .mov clips I need to integrate into the presentation. I embedded a .mov file into a Keynote slide and then saved and exported the Keynote file by SHARE > EXPORT > Formats: Web Movie, Small.
While I'm getting the media to work, the resolution of the Keynote .mov file is very grainy.
Are there some settings to be aware of to get a clear resolution with a Keynote .mov file?
Thanks for sharing your insights.
Ramone

You've probably picked the lowest settings and therefor the lowest resolution!
If you go to the export menu and chose a higher setting or even tinker the custom settings to get the balance of file size / quality you want.
It may also be worth making the slide size smaller (in the inspector)so when you export it's not being downsized in the same way if you need a smaller video (height, width, not file size)

I have a page showing up when I run my Keynote presentation that does not belong there and is not in the navigation area-how do I remove it?

I have a page showing up when I run my Keynote presentation that does not belong there. It's not in the navigation area so there is no obvious way to delete it—how do I remove it?

Not sure if these will help... In the navigator view, is there a triangle next to the slide that appears before the slide that does not belong? If so, click it and you might find the extra slide in there. Or try View Menu:Light Table and see if you can find it in there.

Keynote movies stutter badly once exported to QuickTime

My Keynote presentation features a 2 minute movie. When I export the presentation to QuickTime, although the slides work fine, the movie stutters badly. To be specific, the movie audio is fine, but the visuals stutter badly.
Any workaround for this? Thanks!

I've been having problems in iMovie and Quicktime both. Whenever I used a song from iTunes in an iMovie, I would get stuttered playback. Many others experienced problems with stuttering video when they had extracted audio. Your particular problem could be many things. It could be your graphics card is too small to handle this. If you are running OS X tiger and have virex installed, then virex is using most of your CPU processing power (Do a search on Tiger and Virex to get the uninstaller). Finally you could be having problems with quicktime 7.0.3. If that is the case, then you can just reinstall 7.0.1 and everything should work fine. Or it could be something else. Hope some of this helps.
Thanks,
Clint
Link for virex uninstaller: http://docs.info.apple.com/article.html?artnum=301525
Link for quicktime reinstaller: http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime702.ht ml

How can I run 2 keynote presentations on 2 different macs with only one keyboard?

How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

Running my .mp4 Movie files from an External Drive

I have quite a few familiy movies etc that I've put together using FCP and I've sent these to itunes as .mp4 files which I then playon our TV through the apple TV module.
However I'd really like to be able to store these home movies on an external drive to save my HD space and also keep them safe.
Is it possible to trasfer all of these .mp4 files in my itunes movies folder onto an external drive and run them from there on my apple TV?
Thanks,
Steve

No, Michael Allbritton's (MA) method just copies the files you have selected to consolidate to the location you have temporarily designated in preferences. MA didn't mean "library" as being the library file (library.itl) but the "collection". Your files would still all be managed from the same iTunes library file on your internal drive but the movie files you selected to consolidate would now be referenced to their new location on the external drive.
Note the difference between these two methods:
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Moving your movies will only apply to your current collection. If you add movies in the future you will need to make sure they are on the external drive, then hold down the option key while dragging the file to iTunes to tell iTunes to not copy it to your internal drive (which has been re-set as the location for your media folder after the move directions).

Keynote Movie Export with Manual Advance doesn't work posted on MobileMe

Hi,
After exporting a Keynote Presentation to Quicktime with Manual Advance function checked the Manual Advance function is working perfectly.
However, after I post the same Quicktime movie on my Mobile Me gallery (or a webpage via iWeb) the Manual Advance only works on slide 1 taking it to slide 2.
When I click to advance at slide 2 it returns to slide 1 instead of going to slide 3...
Any suggestions appreciated.
Thanks in advance,
Clayton

This could be the old bug that causes this if the movie wasn't fully loaded. Try waiting till the movie fully loads (if it's not showing a progress bar, just wait a few min as it will probably load fully in that time). Then try it again. In my tests with older versions (haven't tested 09) this was the case...clicking on anything before the movie fully loaded sent you back to slide 1.

No Sound On Exported Keynote Movies

When I export recorded presentations as movies they come through with no sound. The presentation plays normally with the correct recorded timing but there is no narration. I know the narration got recorded because I can play it back in Keynote and hear it. Just not when I export it.
I have spent a lot of time on the phone with AppleCare and gone through all the trouble shooting they advised and still no sound. Does anyone have any suggestions? This is a very important feature for me to be able to use. Any alternatives to Keynote's built in export function for producing movies from the recorded presentations?

Thereby keeping us on the full price upgrade treadmill (O) At least you can sat it represents feature improvements for the money – unlike so many other software non-free upgrades to get major bug fixes like the dreadful Bento.
I think a major feature request, Precision placement of end positioning for builds is kind of included by way of Magic Moves or whatever they are calling it but it's only between slides. Still implies numeric control of position which could be a BIG improvement on zooming in, fudging around by hand only to lose control of the object as it disappears behind its start image. It's kind of like a feature I requested, duplicate slide with objects in end positions (as a easy fix) but better in that the end position can be modified and Keynote calculates the adjustment to move, rotate etc.

Next Slide/Slide Transition in Full Screen on my Keynote Movie

Hello everyone,
I hope you can help? I have been using Keynote to prepare some slides for a talk I am delivering and to ensure I have no 'technical mishaps' I need to have a copy of the Keynote in a .mov format so that it can be played in Quicktime on a Mac or a PC.
I have exported the Keynote to Quicktime which works brilliantly on my Mac and on the PC when you view it in the Normal View. You can use the left/right arrows on the keyboard to move forward and backwards through your slides and use the mouse to access the hyperlinks. The problem occurs when I enter Full Screen View (which will be necessary when I deliver this talk!) - although a mouse click moves the slides on I cannot find any way of moving back a slide, or of accessing my hyperlinks.
Please help?!
Thanks, Chrissi

Do you have the PDF version to fill the full screen and not leave borders? If you print to PDF (not create PDF), then a margin is added by default (as when you print to paper). The border can be reduced to 0, but that is an extra step with the print. As I recall, the PDF Maker (create PDF) does not include the margins. Thus the whole margin bit may be the issue.

Keynote movie html

I've embedded a video into keynote and everything works fine until I export as html. When I few in a browser my movie now appears off the page.

Hi Roddy,
Unfortunately the movie has to appear at the side of the slide.
It looks like this in Keynote
and this in the browser

Keynote movie exposure

Can I modify the exposure of movies in keynote 6.1?
As I see, the exposure can be adjusted in case of images, but if a movie is too dark, can it be corrected somehow? The imovie-adjust-export routine is a no go, cause i have a square format movies, and imovie cannot export square movies (I end up with correct exposure level, but with 2 black bars on the side of the movie).

You can change brightness contrast and colour.
Download and install MPEG Streamclip
open and drag the video file into the main window
File > export to Quicktime
compression: H264
adjustments: change brightness, contrast, saturation, click OK then Preview
change the settings if required

Failure to run a flash movie in IWeb

Hi All,
I've created a flash movie using Adobe Flash CS4, have gone through the procedure "by the book" following a how-to-do video [yes, I'm a novice!!].
I've published the file and produced the necessary files filename.swf, index.html, skinUnderAll.swf and a preview.jpg
OK, everything seemed OK, but try as I may, I cannot get the **** thing to run on iWeb via my me.com using this code in a HTML Snippet:
<IFRAME SRC = "http://idisk.me.com/MYUSERNAME/Web/Sites/flash/index.html" WIDTH="720px" HEIGHT="576px" FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>
"index.html" refers to the html that was produced by Flash CS4 and double clicking this runs the video.
For the life of me, I cannot understand where I'm going wrong & it's driving me nuts!
Can someone please check that code out & see what's wrong.... or is the prob elsewhere?
I've looked through
Any assistance most gratefully received!!
TonyT

Hi again, Roddy,
Many thanks for coming back on this one again... it's appreciated.
What's odd is that if I double-click on the original file called "redsea.html" file on my computer, the movie opens & runs OK, so I guess the html is OK. I've even "copied" or downloaded the file back onto my Mac and placed it in with the other related files and it loads & runs OK.
In answer to your question, if I change the target to a preview file (a .png image file) within the same directory, this opens in a browser window. So the path appears to be correct. However, if I target the "redsea.swf" file nothing happens other than a blank white window where the flash movie should be; albeit a correctly sized and positioned window.
This info may help further;_
What I did from from scratch, I created a short movie and used Adobe Flash CS4 to create all the necessary files and copied them over to my iDisk. The files included the redsea.swf, redsea.html, preview.png, the SkinUnderAll.swf & the .flv file associated with the flash movie. These were uploaded [http://web.me.com/myusername/flash/redsea.html].
I've then used the code below in a html snippet in iWeb, but the movie refuses to load.
If, however, I change the target to a preview file (a .png image file) within the same directory, this opens in a browser window. So, I guess this means that the path to be correct.
I don't understand why the .html file will not open in iWeb?
For more info, here's the code I used:-
<object classid="clsid:D27CDB6E-AE6D-11CF-96B8-444553540000" id="obj1" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#v ersion=10,0,40,0" border="0" width="720" height="576"><param name="movie" value="http://web.me.com/myusername/flash/redsea.html"><param name="quality" value="High"><embed src="http://web.me.com/myusername/flash/redsea.html" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" name="obj1" width="720" height="576"></object>
Any help most gratefully received!!
Tony

RUNNING A KEYNOTE MOVIE ON A PC

Similar Messages

Maybe you are looking for