Running A Little Hot- How To Test The Fans?

I left my Macbook on standby (on but closed) for a few days (not recommended, I know) and when I came back to it, it was rather unduly hot for a computer that hadn't actually been running. I opened it; it wouldn't wake up. I force-shut down by holding the power button, turned it back on, and it started up REALLY sluggishly. Now, it runs, but much quieter than it used to.
I appreciate the silence but a Macbook that died due to overheating is no good to anyone. So before I bring it into the genius bar for dead fans, I wanted to ask if there was any way to force the fans to turn on if they work to make sure they don't. (Or any other method of eliminating "paranoia" as a viable explanation for the silence.)

Perhaps the room was hot. Perhaps my (slightly) defective battery is responsible. Who knows? I could feel that it was hotter than it ought to be given the ambient room temperature. And it appears to have no fans, which is why I want to test them.

Similar Messages

  • I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

    I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

    Hello dwb,
    Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
    Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
    Thank you again for your advice,
    Regard,
    Beauty of Bath

  • How to test the process chains

    hi sap gurus,
    Can anybody tell me how to test the Process chains before i load real time data,i run process chains every morning 6.15 am,before that i want to test every process is linked to another.
    thanks in advance.

    Hi,
    Scheduling the process is the only way to check whether it is running fine or not. The process chains should be checked first in the Dev server and then in the QA server before transported to Prod.
    You can also check the process chain using the "check" button to see if the processes are in the proper sequence or not.
    There is a "log" button to keep track of the progress of the chain
    suresh

  • How to test the parameter new_active_sess_pool_p1

    Dear all,
    How to test the parameter new_active_sess_pool_p1? I have set the new_active_sess_pool_p1=1,and I login db using the user HXL,execute DML and make sure the session is active,now i login the db again and found the new_active_sess_pool_p1 not work,Why?
    Begin
      Dbms_Resource_Manager.Create_Pending_Area();
      Dbms_Resource_Manager.update_Plan_Directive(Plan => 'MAXCAP_PLAN',
                                                  Group_Or_Subplan => 'MAXCAP_PLAN_G1',
                                                  new_active_sess_pool_p1 => 1);
      Dbms_Resource_Manager.Validate_Pending_Area();
      Dbms_Resource_Manager.Submit_Pending_Area();
    End;
    Begin
      Dbms_Resource_Manager.Create_Pending_Area();
      Dbms_Resource_Manager.Set_Consumer_Group_Mapping(Attribute      => Dbms_Resource_Manager.Oracle_User,
                                                       Value          => 'HXL',
                                                       Consumer_Group => 'MAXCAP_PLAN_G1');
      Dbms_Resource_Manager.Validate_Pending_Area();
      Dbms_Resource_Manager.Submit_Pending_Area();
    End;

    Hi,
    The issue have solved,just as run the flowing:
    BEGIN
    DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP (
    GRANTEE_NAME => 'HXL',
    CONSUMER_GROUP => 'MAXCAP_PLAN_G1',
    GRANT_OPTION => TRUE);
    END;

  • How to test the RFC to Flat File scenario

    Hi,
    How to test the RFC to Flat File scenario
    regards,
    kiran

    Hi,
    After running the RFC it's going Dump.
    this is the error message i got.
    "Error analysis                                                                     
    An error occurred when executing a Remote Function Call.                     
    "CPI-C error CM_RESOURCE_FAILURE_NO_RETRY"                                                
    Status of connection.... "CODE=CM_RESOURCE_FAILURE_NO_RETRY -1 -1 SAPCODE=666
    CONV="                                                                      
    Internal error code.... "RFC_IO5"                                                           
    There is an error in the communication system. To clarify                    
    and resolve the error, contact your system administrator.                     "

  • How to test the simple .java file in cactus

    dear friends,
    i have use the junit first time .And i am working in weblogic8.1 so i have use cactus .But i face the problem to use it.
    1. how to test the simple .java file in cactus.
    2.how to run the cactus in weblogic 8.1.

    Hi,
    It is because the converter works on byte code and it only supports a subset of the Java language (see the JC specifications). It is kind of like compiling you code on Java 6 and trying to run it on Java 5. The JCDK outlines the required compiler version.
    Cheers,
    Shane

  • How to test the payload in XI

    Hi all,
    could please explain how to test the payload in xi and with steps.
    Thanks in advance,
    Radhika

    Hi Radhika,
    You can test in three ways.
    1.)  In message mapping directly give the relevant data and then execute.  Here you can test whether the mapping is correct or not.
    2.)  In Integrstion Directory after completing and activating  the Configuration,  in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
    3.)  In RWB in COmponent monitoring.  Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
    Now give user name and pass word.
    Paste the payload from massage mapping and then press test tab.  Here yoyu can directly send the message from XI server to the receiver system.
    Ok,
    Jeevan

  • How to test the rule if multiline container is passing to the task?

    Hi Experts,
                      I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
    ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
    In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
    Is it possible to test the rule independently if I use multiline container as import parameter in my rule?  If so can anybody please tell me how to test the rule?
    Thank You.
    Srija.

    Hi Pavan,
                     Thank you.
                     To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
    I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
    Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
    Thank you.
    Srija

  • How to test the PMS/apprisal template

    Hi experts,
    We have completed the configuration of Apprisal templete.
    With OOHAP_BASIC,PHAP_CATALOG_PA we have completed the process along with status and substatus,staus flow.
    I struckup at this juncture.
    How to test the entire process after the configuration.
    Please advice.
    Regards,
    Sairam.

    Hi Sairam,
    To test the PMS process, please follow the below steps :
    1. Go to PHAP_CREATE_PA and select your template. Enter the details for appraisee, appraiser, reviewer ( if applicable ) and also the start date and end date. Save the document.
    2. Go to PHAP_ADMIN_PA and select the template/appraisee id in the appraisee column in the selection screen and execute. Select your appraisal document and then select from Menu- Appraisal Document->Change Status and select your initial status and sub status.
    Now you can login to Portal/R3 with the user and start testing. The substatus will move automatically based on your workflow. Once you complete a particular status say 'In Planning' you need to manually change the status again from PHAP_ADMIN_PA to 'In Review'.
    Get back to me in case of any queries.
    Regards,
    Sachin

  • How to test the connection between DSD backend and DSD connector

    Dear all,
    I am configuring the MDSD scenario .. and i want to insure that my customization is correct
    How to test the connection between DSD Backend and DSD connector ??

    Hi Viren,
    The problem is:
    We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
    Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
    Thanks,
    RPK.

  • How to test the modified script (Global Dunning)

    Hi all,
    I have a requirement in SAP Script.
    I had modified Global Dunning Letter F150_DUNN_01 and the print program is SAPF150D2.
    Transaction code is F150.
    How to test the script and what is the access path for checking print preview of the modified form.
    Do i need to configure anything before testing.
    Rewards to all.
    Thanks & Regards,
    Aarthi.

    Hi
    Your functional consultant will help you to trigger the output of this dunning output
    or search in SPRO tcode
    o in the related tcode F150
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to test the data

    Hi,,
    The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
    Can you please help me how to test the data? and prepare the unit test case.
    1. Intra-plant movement of inventory between two plants with the same region Code -  In India there are two plants in the state of Maharashtra.
    Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002231 / ZU PO 4600000500
    2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
    Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002232 / ZU PO 4600000501
    3. Intra-plant movement of inventory between two Parts plants.
    Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
    NB PO# 6500002233 / ZU PO 4600000502

    Please  go thorugh this  ...
    eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script. 
    By using eCATT we can do following operations,
    ·        Test transactions, reports, and scenarios
    ·        Call BAPIs and function modules
    ·        Test remote systems
    ·        Check authorizations (user profiles)
    ·        Test updates (database, applications, GUI)
    ·        Test the effect of changes to customizing settings
    ·        Check system messages
    For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
    Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
    To develop a test script in eCATT we need to follow the following steps,
    1. Creating Test Scripts.
    2. Creating Test Data Containers[16] .
    3. Understanding System Data Containers[17] .
    4. Executing Test Configurations.
    There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
    For  details  and the screenshots     please  see the  link
    http://www.erpgenie.com/sap/ecatt/
    Reward  points if it is  usefull ...
    Girish

  • How to Test the individualmapping field and conditions...

    Hi Frnds,
    I done mapping from source to destination as per tech spec in my scenario based on some conditions
    i used node functions also..
    But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
    Regards,
    Raj

    Hi
    If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
    Regards
    Sami
    Reward points if useful.

  • How to test the performed  SAP SCRIPT

    Hi friends can any one help for
    how to test the performed  SAP SCRIPT. What are the necessary codes or anything else for performing it

    Praveen,
    Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
    Regards,
    Vinod.

  • How to test the UDA or Attribute of an ancestor member

    Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...

    You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.

Maybe you are looking for