Running a Mac G3, having been using a Laserwriter Select 360, but it and two others are now dead. What is the next best or better printer to use?
I am running a desktop beige Mac G3 and have been using a Laserwriter Select 360, but it an two others are now dead.
What is an equal or better printer to use with the Mac?
Hey, BD, I looked at Brothers last night in connection to this questiona and it looks like their newest/current laser print-only units go back to 10.4 but no further.
Brother is the best hope but the OP may need to look for an older model still in stock. For example, for our older Brother HL5250DN, they still show OS9 drivers:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?r eg=us&c=us&lang=en&prod=hl5250dn_all
Gary, web-check for stores that still have older models on teh shelf. You can also look at "newer-but-not-new" and then use the Brother site to check for OS9 drivers.
Founds some of my model on eBay:
http://www.ebay.com/sch/i.html?_nkw=Brother+HL-5250DN
We paid US$199 for ours new about seven years ago. It's been a real workhorse and trouble-free. Well, except for the time my wife tried to feed it a odd paper stock that was not on the printer's official diet!
A Beige G3 consideration: The Big Beige doesn't come with USB ports. You must add a PCI USB adaptor card, and the ones that worked in the Beige are harder to find today.
However, the Beige has built-in ethernet so if you get a printer with an ethernet connector, you will be in bisiness with neither the expense of an extra adaptor card nor the occasional buttheadedness of USB printing. The "N" in our Brother model designates it as a network printer so it has an ethernet port. Many others do also.
Similar Messages
-
If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.
-
When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
Hyper-v platform Is grayed out and When i move the mouse point to Hyper-v platform it shows a message.
"Hyper-v cannot be installed: A hypervisor is already running"
When I try to install vmware it says..
VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v...
For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
and
https://communities.vmware.com/community/vmtn/developer/forums
Good luck.. -
Anybody with isues running office:mac 2011, I am using Mac OS 10.6.8 It ran for 2 years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?
I think my problem has been that in Sytem Preferences>Mouse, my "Double-Click Speed" was set to the SLOWEST setting. After some experimentation, I now have the that setting two notches from the "Fast" end of the scale. In case it's important, the "Primary mouse button" in my Preferences is set to "Left".
This not only solves the text selection issues described, but also seems to eliminate the strange "resolving alias to" problem.
[For the curious, I have a Logitech Performance MX wireless mouse which can be configured with "Logitech Control Center". But the LCC software doesn't control double-click speed; this setting can only be made in the Mouse System Preference pane.] -
I having been using iphone 4s apps for days and suddenly 3-4 on a given page will quit responding. The apps on other pages continue working fine. I am unable to open these even if I shut them down and reopen them or reboot my iphone. I have had to remove and reinstall some in the past. Any other solutions?
Which of the basic troubleshooing steps described in the User Guide, Appledix B have you tried already?
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
My macbook pro was recently returned to me after having been lost. When I turned it on and connected to the internet at home, the activation lock activated. I put my password in and the macbook went to a white apple screen and now won't do anything else. How do I get it running again?
Take it to an Apple Store. Take proof of purchase with you.
-
When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS. -
I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says OS 10.6.8. Now, I can't print to my Lexmark z705. I get an error message with no explanation.
Unless there are drivers provided by Apple to work with the printer, you're out of luck. The latest drivers provided by Lexmark are for OS X 10.4 Intel. Unfortunately, this can happen when slightly older peripherals and newer software don't mesh.
-
In iTunes v 10.2.2, InternetRadio stops and rebuffers every 30 seconds. What is the problem and what can bedone about it? I'm running Mac OS X 10.6.7 0n a 2.4 G Intel Core 2 Duo iMac.
In iTunes v 10.2.2, InternetRadio stops and rebuffers every 30 seconds. What is the problem and what can bedone about it? I'm running Mac OS X 10.6.7 0n a 2.4 G Intel Core 2 Duo iMac.
-
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
I am programmer and I am using dr java on my mac-book pro with retina display but dr java doesn't support retina display, what is the possible way to solve this ?
I have made some progress.... I can print wirelessly from my printer now, but I can't set the printer itself to be wireless. I had to move my printer downstairs to where my router is...which is not that convient. I printed up the page you asked about....and as expected, it says it is off line and there is no IP address. So now I need to figure out how to make my printer itself wireless. I did download the HP driver I needed...but I can't access it to do anything else. It seems l like I am missing a step... or I need to hook up my computer itself to the printer to help get the printer to be wirelss, but I can't hook it up because there is no port for me to do that (no port that looks like a phone jack). I am guessing I would need a different type of cord, but I am not sure what kind of cord that would be! Ugh!
-
I Have a macbook pro and i want to edit my pictures further. Such as writing on them with different fonts etc.. ,but also being able to crop them the size i want, which key notes wont let me do. What is the next step?
thanks!!Try the excellent shareware application, Graphic Converter. In addition there are many very good photo editing programs for the Mac. Look for them all at MacUpdate or CNET Downloads.
-
I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.
What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
Matt -
I have Mac OS X with 10.7.2, What is the latest best update plz
Gday i have a Mac OS X and run 10.7.2
what is the latest version best for me to update with plz ??the apple in the upper left corner, About This Mac will also allow you to check for updates...and when you find you cannot login to the app store because it is bogged down gives a clue that something has been released
-
I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4
If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
That's as far as a G4 can go.
Check eBay for discs:
http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
No Snow Leopard, 10.6x or Lion, 10.7x.
they won't run in a PPC Mac.
Maybe you are looking for
-
In stead it opens a new tab and tries to open the url of the file. so far: - I've deleted the com.apple.safari.plst - Reset safari - there are no plugins (speed download or igetter,...) To no avail, this drives me crazy. thanks in advance
-
How to send to multiple people using same port?
I am trying to have one person send TWO audio sources to 10 others using same port- lets say 12345. I get "Can't open local data port:" error. The first audio is fine since I just use .addTarget(). Is there a way i can do the same for the 2nd audio s
-
Accounting document not created for the billing document in CIN
Hi Experts, I have made conditon records for BED, CESS, Edu Cess and VAT. I hve defined the accounts in both excise transactions and VKOA Settings even then the accounting document is not getting created. I am getting the following error. No account
-
I have restored my iphone 5 for the second time today, and it keeps crushing after 1hour of having completely restored it through iTunes. What am I supposed to do? I deleted some apps I had recently installed, even changed the background refresh. Wha
-
Question about "synchronized" and "wait"
Hello, everyone! I have seen a piece of code like this, synchronized (lock) //do operation 1 lock.wait(); //do operation 2 I think in the above piece of code, when a thead finished operation 1, it will release the lock and let other threads waiting f