Running a patch in preinstall=Y mode

As part of the action plan on an SR, I have been asked to apply 5 patches, one of which (Patch 13864126) in to be run in preinstall=y mode.
What are the consequences of applying the patch normally without the preinstall=y mode?
Thanks

867644 wrote:
As part of the action plan on an SR, I have been asked to apply 5 patches, one of which (Patch 13864126) in to be run in preinstall=y mode.
What are the consequences of applying the patch normally without the preinstall=y mode?
Thanks
If the patch README file instructs you to use preinstall=y option then please do so and don't apply the patch normally.
Please see http://www.oracle.com/pls/ebs121/search?word=preinstall&format=ranked&remark=quick_search for details about preinstall mode option.
Thanks,
Hussein

Similar Messages

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

How do I run the SW in single phase mode?

How do I run the SW in single phase mode?

All you need to do is to modify the FPGA example a little bit, as the below illustrations.

Run CF10 Developer in Standard Edition mode

Is there a way to run ColdFusion 10 Developer in Standard mode for testing?
My main concern is the Oracle drivers and if the standard edition will meet our needs, but would like to test it before purchasing what could be the incorrect license.

"Oracle Drivers" is not generally interpretted to mean "Drivers written by Oracle [the company]", it means "drivers written for Oracle [ie: the database]". A case in point... would you describe the drivers Oracle supply for MySQL to be "Oracle drivers" or "MySQL drivers"?
So will you please stop pedantically splitting hairs. You cannot use the drivers Adobe have licensed from DataDirect to connect to an Oracle database in CF Standard. I have now had this verified by two people, both of whom are sitting in front of a CF Standard install, and have taken time to check this for you. You can describe the drivers however you like, but the fact remains you can't use 'em.
You need to get hold of some drivers from somewhere else. I recommend getting some from Oracle, given - as you point out - they are the vendor of the DB in question. But there are other vendors who write Oracle drivers too. As you say: DataDirect do. You can use theirs. You have to pay for them though.
Adam

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

When i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

hello,
I had the same issue. This is what I was told to do.
iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
Appcleaner   will do this and its free.
The following procedure has helped solve many issues with Keynote:
1 Close Keynote then use Appcleaner
2 Empty the Trash
3 Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
          allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
4 restart the Mac
5 Reinstall iWork
6 Repair permissions:
          Applications > Utilities > Disk Utility > First Aid:   click on your system disc in the drive column
          and select Repair Disk Permissions
7 open Keynote and test

[b]Possibility to run 9iAS for OCS in clustered mode[/b]

Possibility to run 9iAS for OCS in clustered mode
Hi,
we're using two nodes of 9iAS in two data centers. We've been told that it isn't possible to add the 9iAS to a 9iAS cluster. Does anybody has experience to use two nodes of 9iAS of OCS2 as cluster with load balancing and automatic configuration deployment functionality?
Any help would be welcomed...
Kind regards,
Tobias Hitzfeld

You can use RAC for the databases but the infrastructure is only supported with HA CFC (Cold failover Cluster). You can look at the document for this in this location.
http://otn.oracle.com/products/ias/hi_av/content.html

HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

Are there any ventilation issues with running a macbook air in clamshell mode?

...that makes sense to me.
but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard? Is this claim based on an old macbook design?
for example, here's a related discussion (although fairly old):
11-08-2010, 12:16 PM
#6 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by tHE j0KER
Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.)
Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port..
Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
11-08-2010, 02:34 PM
#7 (permalink)
ajreynol
Notebook Virtuoso
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,542
Rep Power: 18
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
Disable Vaio beep when pressing volume or special keys
11-08-2010, 03:34 PM
#8 (permalink)
doh123
Without ME its just AWESO
Join Date: Feb 2009
Posts: 3,282
Rep Power: 22
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
Mac OS X Gamer/Porter
(We do exist!)
Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
11-08-2010, 03:38 PM
#9 (permalink)
Wolfpup
Notebook Virtuoso
Join Date: Jun 2007
Posts: 3,871
Rep Power: 28
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
11-08-2010, 03:45 PM
#10 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by doh123
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

How I can run Firefox with enabled Responsive design mode from command line?

I trying to find a way for running Firefox with already enabled Responsive mode with predefined resolution (for selenuim testing) for standartizing a viewport size in different OS`s.
Thanks!

These are all the command line options [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options Command Line Options]

Run interim patch 5689908

OS: Linux
DB: 10.1.0.5.0
I am installing interim patch # 5689908.
I shutdown the database.
oracle@test:ORACLE_HOME/OPatch> ./opatch apply
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright (c) 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : $Oracle Home
Oracle Home Inventory : $Oracle Home /inventory
Central Inventory : /opt/oracle7/oraInventory
from : /etc/oraInst.loc
OUI location : $Oracle Home /oui
OUI shared library : $Oracle Home /oui/lib/linux/liboraInstaller.so
Java location : $Oracle Home /jre/1.4.2/bin/java
Log file location : $Oracle Home /.patch_storage/<patch ID>/*.log
The patch directory area must be a number.
ERROR: OPatch failed because of problems in patch area.
oracle@test:$Oracle Home /OPatch> ls -ltr
-rw-r--r-- 1 oracle7 oinstall 0 2006-05-01 16:29 opatch.ini
drwxr-xr-x 5 oracle7 oinstall 280 2007-01-08 00:39 5689908
-rw-r--r-- 1 oracle7 oinstall 14256 2007-01-15 23:10 opatch.pl
-rw-r--r-- 1 oracle7 oinstall 6696 2007-01-15 23:10 opatch.bat
-rwxr-xr-x 1 oracle7 oinstall 7270 2007-01-15 23:10 opatch
-rw-r--r-- 1 oracle7 oinstall 19109 2007-01-15 23:10 emdpatch.pl
-rw-r--r-- 1 oracle7 oinstall 2410 2007-01-15 23:10 README.txt
drwxr-xr-x 2 oracle7 oinstall 80 2007-01-18 09:31 jlib
drwxr-xr-x 2 oracle7 oinstall 184 2007-01-18 09:31 docs
drwxr-xr-x 2 oracle7 oinstall 312 2007-01-18 09:31 perl_modules
I installed and run interim patch 5689908 under $Oracle Home /OPatch.
Is it ok?
Do I need to install & run patch 5689908 under ORACLE_HOME?

oracle@sac: ORACLE_HOME/OPatch> ./opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright (c) 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : ORACLE_HOME
Oracle Home Inventory : ORACLE_HOME/inventory
Central Inventory : /opt/oracle/oraInventory
from : /etc/oraInst.loc
OUI location : ORACLE_HOME/oui
OUI shared library : ORACLE_HOME/oui/lib/linux/liboraInstaller.so
Java location : ORACLE_HOME/jre/1.4.2/bin/java
Log file location : ORACLE_HOME/.patch_storage/<patch ID>/*.log
Creating log file " ORACLE_HOME/.patch_storage/LsInventory__01-23-2007_12-23-37.log"
Result:
Installed Patch List:
=====================
1) Patch 5689908 applied on Tue Jan 23 09:46:53 PST 2007
[ Base Bug(s): 5406923 5689908 4359124 4925103 4939157 5094098 4587572 5648102 5222931 5057964 5227879 5347751 5055442 4661844 4152843 4691191 5637094 5222032 4754900 4331689 5242647 5458543 5417371 4671216 4903532 5029950 5464895 5029952 5650178 5029954 5225797 4402808 4047969 4554284 4874628 4966417 4871035 5091108 5401921 4458415 4605877 4900129 5092688 5226235 5095648 4751932 4449900 4768040 5490845 5049074 5490935 4348230 5239126 5049077 5644862 ]

URGENT Please: Problem after run autoconfig patch(Advanced_Inbound 5505631)

Hi
First I must say that I am new on applying patches on Oracle applications.
I have just applied a patch for Advance Inbound 5505631. The patch went well with no error. I check the Applications and the patch was already in place.
But when i run the autoconfig, it give me some errors and now i cant start APPS
One is that the concurrent manager don’t start(CONCSUB failed due to ORA-01017). I have change the xml file from GUES/GUES to GUES/ORACLE, but still no start.
I think the problem was not the patch itself, but other issue
My system is Oracle E-Business Suite 11.5.0 and Linux
Many tanks for your help.
PS: If you need any log to see more, just ask what the log that you need, because I don’t know what log I should post.
JailBreak

Hi again
Yes hsawwan i no that must have APPS user/pass. Tank you
This is my log from the APPS start service
I see there are too many login/password error? My APPS user/pass is correct
And i can connect trough sqlplus to my DEV db(with system password)
Setting service Oracle Apache Server DEV_machine_name to mode 2
Executing service control script:
/opt/oracle/dev/devcomn/admin/scripts/DEV_machine_name/adapcctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adapcctl.sh version 115.50
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleTNSListener80APPS_DEV_machine_name to mode 2
Executing service control script:
/opt/oracle/dev/devcomn/admin/scripts/DEV_machine_name/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_DEV.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleConcMgrDEV_machine_name to mode 2
Executing service control script:
/opt/oracle/dev/devcomn/admin/scripts/DEV_machine_name/adcmctl.sh start
Timeout specified in context file: 1000 second(s)
script returned:
You are running adcmctl.sh version 115.28
Starting concurrent manager for DEV ...
Starting DEV_1130@DEV Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleFormsServer-Forms60DEV_machine_name to mode 2
Executing service control script:
/opt/oracle/dev/devcomn/admin/scripts/DEV_machine_name/adfrmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adfrmctl.sh version 115.37
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
Starting forms server for DEV on port 9009.
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleReportServer-Rep60_DEV to mode 2
Executing service control script:
/opt/oracle/dev/devcomn/admin/scripts/DEV_machine_name/adrepctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adrepctl.sh version 115.32
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
starting Reports Server for DEV on port 7009.
Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service Oracle Fulfillment Server DEV_machine_name to mode 2
Executing service control script:
/opt/oracle/dev/devcomn/admin/scripts/DEV_machine_name/jtffmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /opt/oracle/dev/devcomn/java
Fulfillment patch level validated.
Starting Fulfillment Server for DEV on port 9309 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server DEV_machine_name adapcctl.sh Started
OracleTNSListener80APPS_DEV_machine_name adalnctl.sh Started
OracleConcMgrDEV_machine_name adcmctl.sh Started
OracleFormsServer-Forms60DEV_machine_name adfrmctl.sh Started
OracleReportServer-Rep60_DEV adrepctl.sh Started
Oracle Fulfillment Server DEV_machine_name jtffmctl.sh Started
Oracle Restricted Apache Server DEV_machine_name adaprstctl.sh Disabled
Oracle Apache Server DEV_machine_name for PL/SQL adapcctl.sh Disabled
Oracle TCF SocketServer DEV_machine_name adtcfctl.sh Disabled
Oracle Metrics Client DEV_machine_name adfmcctl.sh Disabled
Oracle Metrics Server DEV_machine_name adfmsctl.sh Disabled
Oracle ICSM DEV_machine_name ieoicsm.sh Disabled
Oracle iProcurement Bulk Loader DEV_machine_name icxblkctl.sh Disabled
Oracle Discoverer services DEV_machine_name addisctl.sh Disabled
ServiceControl is exiting with status 0

My mid-2010 27" iMac running Mavericks is fine in safe mode, but with normal boot up the screen goes haywire with some animation emanating from the apple menu area at top left of screen.

From what I'm reading in these forums, this is likely an issue due to some 3rd party software / kernal conflict. I am going to run a diagnostic and perhaps someone here can help me evaluate the results and determine what software must be removed.
It's hard to describe what I'm seeing on screen. I've never seen anything like it. I get a number of lines that begin at the top left of my screen, about at the apple icon, and they spread out in a triangular pattern from left to right, top to bottom across my screen, while the entire screen flickers uncontrollably. I realize that iMacs from this era have screen issues, but since I can boot fine in safe mode, this can't be a hardware issue.
Any assistance is greatly appreciated!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Need to run macbook pro in 32 bit mode to run and external modem how do i change from 64 bit to 32 bit

I have a macbook pro which i presume runs in a 64 bit mode. living in a country without broadband i need to use a 32 bit modem, can i change the system to run this modem at 32 bit as it wont load at 64?

Reboot holding 3 and 2, see if your modem works.
Rebooting again sets it back to 64 bit.
If 32 bit works then your fine, for now, but eventually your going to have to go 64 bit.

Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

Hi,
I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
Using qtp in integrated mode worked previously on the solution manager 7.1 system. Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
Sincerely,
David
Edited by: David Snyman on Mar 2, 2012 7:38 AM

Hi Sida,
Can you check SapLogon.ini file maintaining below location please.
let me know it resolve the isse, can you forward your details to <email removed by moderator>
looking forward your response.
Regards
Naveen
File Location
Use
C:\Windows\saplogon.ini
Enable QTP to identify the Solution
Manager Server
C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
Auto log on to SAP Systems for testing
C:\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
64 Bit OS
C:\Program Files
(x86)\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
32 Bit OS
Message was edited by: Manish Kumar

Proper procedure for patching from Single User mode

Typically when I install a patch cluster from Sun, I do a sanity reboot from the console of the server using:
shutdown -y -g0 -i6
When the system comes back online, I log into the console again and then do:
shutdown -y -g0 -i0 (to go into OBP)
then
boot -s (to go into single user mode)
The procedure above was given to me from a Sun technician.
Then I install the patch cluster and reboot. It has come to my attention that Sun recommends breaking any mirrors between your disks before patching. I wanted to know what is the best way to do this for both Veritas Volume Manager and Solaris Volume Manager. For Veritas Volume Manager, I was thinking of going into the vxdiskadm menu driven utility and choosing the option to "Remove a disk for replacement" for the rootmirror disk and then after a reboot to check that the patches did not cause a problem, go back into vxdiskadm and choose the option "Replace a failed or removed disk" and select the rootmirror which should then begin to automatically resync itself to the primary rootdisk. Any comments on if this is a proper way to do this or if someone has a better method, I would love to hear it. I am assuming a system with just two internal disks: c1t0d0s2 and c1t1d0s2
Also, if anyone can comment on how to do this with Solaris Volume Manager or if it is required would be great also.
Thanks much for any advice.

Typically when I install a patch cluster from Sun, I
do a sanity reboot from the console of the server
using:
shutdown -y -g0 -i6
When the system comes back online, I log into the
console again and then do:
shutdown -y -g0 -i0 (to go into OBP)
then
boot -s (to go into single user mode)
The procedure above was given to me from a Sun
technician.Not a bad thing to check reboot before patching, but I don't think it's in any official documentation that I'm aware of.
Then I install the patch cluster and reboot. It has
come to my attention that Sun recommends breaking any
mirrors between your disks before patching.Again, I don't know if it's "official", but if you have a backup copy that you could boot from, it does reduce the possibilities of critical problems from a bad patch.
I wanted
to know what is the best way to do this for both
Veritas Volume Manager and Solaris Volume Manager.
For Veritas Volume Manager, I was thinking of going
into the vxdiskadm menu driven utility and choosing
the option to "Remove a disk for replacement" for the
rootmirror disk and then after a reboot to check that
the patches did not cause a problem, go back into
vxdiskadm and choose the option "Replace a failed or
removed disk" and select the rootmirror which should
then begin to automatically resync itself to the
primary rootdisk. Any comments on if this is a proper
way to do this or if someone has a better method, I
would love to hear it. I am assuming a system with
just two internal disks: c1t0d0s2 and c1t1d0s2
Also, if anyone can comment on how to do this with
Solaris Volume Manager or if it is required would be
great also.Well, it'll work as you've described, but what if the patches fail? The disconnected mirror is not bootable. You'd have to go through an unencapsulation and other things from a CD.
I've often simply pulled one side of the mirror while the machine was shutdown. Since the mirror was valid prior to pulling, it will boot. If there's a problem, I shut down, swap disks, and boot from the untouched mirror. If no problem, I re-insert, reattach the disk to the diskgroup, then recover the volumes.
I don't know of any nice supported method of booting from an offline VxVM mirror that doesn't involve a very long series of steps. My method isn't supported, but it does work. If you have both disks in the machine at the same time though, it'll update the private regions. Don't do that until you're ready to sync up one way or the other. Test before doing it in production.
In any event, you should have a backup ready to go.
Darren

Running a patch in preinstall=Y mode

Similar Messages

Maybe you are looking for