Running a Plug-In from an external application

Can you run a plug-in using a windows application?

Be aware that a simple "Save As" (vs. a Save) will perform a variety of optimizations to a PDF to get its size down. Be sure that when your external application issues a Save - that it is really doing a Save As instead.
Leonard

Similar Messages

  • Is it possible to send data from an external application to a plug-in that executes a menu item?

    I want to pass some parameters from an external appliaction  to my own plug-in. The plug-in creates a menu item for adding electronic signature. The menu item is executed from my external application using MenuItemExecute("mymenutem").

    Since you control the application AND the plugin - you can define ANY method of communication you want.  Shared files, shared memory, IPC, named pipes, etc.

  • Is it possible to run an operating system from an external hard drive?

    Really weird question here, but I've always wanted to know this. I have a MBP 13" mid-2012 and I installed a 256GB SSD. I currently have OSX 10.9 and Windows 8.1 installed on the drive, but is it possible to actually run an operating system from an external hard drive. I don't want to install anymore operating systems onto the internal SSD because I don't want to run out of space. So, I'm wondering can I install Linux on an external hard drive, the same way I would on an internal hard drive and just plug it in via USB 3 or Thunderbolt? Is it actually possible to use a computer this way? I know I can boot from a usb stick, so is it possible to actually use a computer with an operating system installed in an external hard drive?

    windows don't support being installed on usb mass storage installs like usb

  • Is it possible to run my iTunes solely from an external drive?

    I'm a college student and don't have my own computer anymore, and I currently use campus computers and library computers (No admin priviledges).
    I currently have all my previous iTunes music backed up on my external drive, and I have the iTunes package (The install package you download from Apple) also on there as well.
    I'm basically wondering if I can install iTunes onto my external drive, open it from there, and also be able to access my music from there as well?
    To give more clarification, I want to be able to go to a college or library computer (These computers are running on Windows XP or 7), be able to open iTunes from my external drive, and be able to manage and use my library from there.
    With college and library computers, you don't have the admin rights to install iTunes. However, I do have friends that will let me use their computer to install iTunes onto my external drive (If that is possible). So not being able to install iTunes because of lack of admin priviledges is a barrier I can get through.
    How ever I don't know if it's possible to run, and open iTunes from an external drive, and be able to open and use my iTunes library from there.
    And help would be great.
    Thanks in advance!

    how would I go about putting my iTunes library on an external drive?
    It depends on where your library is now and how it's organized. If you have all your content and library files in a single iTunes folder, drag the entire iTunes folder (the _entire_ folder, _not_ just the iTunes Music folder) to your desired location. Then hold down the Shift key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location. Note that this procedure assumes that all of your tracks are contained in the iTunes Music folder. If they're scattered around your volumes, moving them becomes much more complex. Don't delete the tracks from the old location until you've confirmed that they're working correctly from the external drive
    Also is it possible to get past administrator rights, to install iTunes and delete iTunes each time I use a computer that I don't have administrator rights to? That way I can still use iTunes.
    No, it's not possible. As with most applications, you need administrator rights to install iTunes.
    Regards.

  • Accessing Cluster Data From an External Application Using the DataSocket

    I am trying to interface to a legacy system running a rather large and complex LabView application (which I really don't want to modify).  The data I need to access has been posted on the DataSocket server as a cluster.  Is there any way of accessing that data as a structure from an external application?  I do have Measurement Studio and its CNiDataSocket classes and I am able to connect to the data, but I can't see how I can pull the data over and extract the values that I require.
    Any ideas?

    This is a duplicate post.  Check this post
    Pat P.
    Software Engineer
    National Instruments

  • How do you pass an ActiveX Variant from an external application to LabVIEW?

    Background: I created a LabVIEW ActiveX server. I can access it with my external application (Matlab). I have a control variable in my LabVIEW executable. I want to use Active X to set the value of my control variable from my external application.
    Documentation: The only reference in the documentation for this task is in the Using ActiveX with LabVIEW in the LabVIEW 2009 help. It simply says "Use the variant control and indicator to pass data to or from ActiveX controls." I also went through all the ActiveX examples in the example finder and did not find any vis that passed variables using ActiveX.
    Questions:
    What should my control variable look like in LabVIEW? Should it be a refnum, a variant, or a data type? Does it have to be wired to a vi connector?
    Do I need to do any magic on this variable, such as change its properties?
    How do I pass the value from my external application to the variable in my LabVIEW executable?
    Thank you.

    Hello Lyn,
     The control variable should be a refnum and it would have to be wired to Automation Open with the correct reference.
    Here are some great examples of using ActiveX Server in LabVIEW
    LabVIEW Executable Used as ActiveX Server in LabVIEW
    http://decibel.ni.com/content/docs/DOC-9647
     Calling ActiveX Code from LabVIEW
     http://decibel.ni.com/content/docs/DOC-9073
    Andy Chang
    National Instruments
    LabVIEW Control Design and Simulation

  • How do I run a user account from an external HD?

    How do I run a user account from an external HD? I will be away from my desktop iMac and want to use our MacBook Pro overseas for two months with my iMac user account copied to an external drive.

    1. WARNING: This procedure is for advanced users only. Some third-party software may not work as expected, or may not work at all, if the home folder is moved.
    2. Back up all data.
    3. Copy your home folder to the desired location, which must be on a volume of type "Mac OS Extended (Journaled)" with file ownership enabled, as shown in the Finder Info dialog. Encryption is optional. The volume must be on a local storage device, not on the network, and it must be mounted automatically at startup — before any user logs in. A disk image will not work.
    The name of your home folder is your short user name. Do not rename it. Do not copy the "Users" folder.
    5. Select
     ▹ System Preferences ▹ Users & Groups
    Click the lock icon and authenticate. Right-click or control-click your name in the account list, and select Advanced options from the popup menu. In the sheet that opens, change the location of the home directory. Log out and log back in.
    6. Test. If you have problems, reverse the above steps. If you got this far, you should have no trouble doing that. If everything works as you expect, delete the original home folder.

  • How to call WebDynpro application from an external application

    Hi All,
    I have an external application, from which an existing webdynpro application should be accessed.
    Is there any way i can access WebDynpro application through an URL, so that i can access the same from the external application.
    I have to pass a parameter also in the url from extrenal application for which that data should be displayed.
    Thanks
    Supriya

    You can call a web dynpro application from an external app by using the web dynpro application url.
    Go to WD application in studio and look at the properties tab, you will find the url.
    It should be something like this:
    http://<host>:<port>/webdynpro/dispatcher/<namespace>/<dc name>/<application name>
    MLS

  • [Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

    This is a copy of a post from my blog, you can also Read it on my blog...
    Introduction
    After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
    There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
    But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
    This guide may interest you if:
    You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
    You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
    What this guide will make you do:
    It will make you erase all your data from your external USB3/Thunderbolt hard drive
    It will make you install Windows on your external USB3/Thunderbolt hard drive
    It will make you install bootcamp drivers
    What this will not make you do:
    It will not make you modify anything on your internal Mac hard drive
    It will not make you use or install the bootcamp assistant
    It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
    What you'll need
    An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
    A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
    One of the following:
    Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
    A PC running Windows 7 or 8 → Read the important note below
    Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
    Download imagex.exe
    Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
    Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
    A USB stick to store your bootcamp drivers
    IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
    Step by Step guide
    Step 1: Get the install.wim file
    If you have a Windows ISO file:
    Mount the ISO
    If you're on OS X: double click on the ISO file
    If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
    If you're on Windows 8: double click on the ISO file
    Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
    Step 2: Clean, partition and format your external hard drive
    On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
    Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
    Type the following and hit enter to open the disk partitioner utility:
    diskpartType the following and hit enter to list your drives:
    list disk
    This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
    select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
    clean
    Create the boot parition by typing the following followed by the enter key:
    create partition primary size=350
    This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
    format fs=fat32 quick
    Set this partition to active by typing:
    active
    Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
    assign letter=b
    Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
    create partition primary
    Format the new partition in NTFS:
    format fs=ntfs quick
    Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
    assign letter=o
    Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
    exit
    Step 3: Deploy the Windows installation image
    Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
    Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
    imagex.exe /apply C:\wim\install.wim 1 o:
    This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
    o:\windows\system32\bcdboot o:\windows /f ALL /s b:
    If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
    If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
    Step 4: Boot from your external drive and install Windows
    Plug in your external drive:
    If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
    If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
    Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
    On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
    The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
    Step 5: Install bootcamp drivers
    Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
    Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
    Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

    Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

  • Can i run i tunes/iphoto from an external hard drive?

    does any one know if i can run ituens/iphoto from an external hard drive and if so how do i do it?

    Drag the libraries to it, launch each application with the Option key held down, and point them there. The iPhoto library needs to be stored on a drive, partition, or disk image formatted as Mac OS Extended.
    (85288)

  • How do I run system recovery dvd from an external dvd drive?

    I am having trouble trying to restore my DV 6000 (dv6915nr) from an external dvd drive.  I am aware that this laptop has had several hardware issues, including the loss of use of the internal dvd drive and have tried all the fixes that I could find,including changing filter settings in the registry, changinging the boot order in the bios and even removing the intenal drive.  Since none of these fixes worked, I removed the hard drive and installed window 7 Prodessional in a desktop computer.  After reinstalling drive in laptop, I installed all the Vista drivers from HP.  Computer works fine except for sound card and Nic that failed and have been replaced by USB devices.  Simce I am not 100% sure the hardware failures are motherboard failures and not software, I would really like to run my System Restore DVDs that I purchased from HP.  And that's where I need help.
    I am A Plus and Network Plus certified, so I am pretty sure  that I have tried all the obvious soutions.  Evedrything turned on, checked the cables, accessed dvd in wimdows and even ran restore disk in a desktop machine to the point that it told me I was trying to restore the wong computer.  I downloaded a program called Win To Flash that allows you to copy a setup disk to an external hard drive, but that didn't work.  HP restore disk does not have  Setup file on it, so it wouldn't copy to drive.  Tried just copying the disk to external and that didn't work either.  Also tried switching drive letters D and E without any success. 
    Bios choices are:
    USb floppy
    ATAPI cd/dvd rom drive
    USB diskette on key
    Notebook Hard drive
    Network Adapter
    Original restore partition is long gone.
    I would rather restore it with an external Hard drive, not an USB memory stick.  I think both would work the same.  I do have an USB floppy drive, if there is some way of starting installation from floppies.
    Like I said, I really like the computer, even with all its faults, but I would like to restore it to its original  Operating System.

    Some progress, I got it to try to boot from an external hard drive.  Downloaded a program called WINToboot. tried to run it, got as far as formatting my  hard drive and might have loaded some kind of boot program.  Would not copy my restore disks because they did not have set up program.  Copied both restore disks to hard drive and tried to boot laptop.  F0 produced choose external hard drive choice.  Got "no OS found" error. only choice ctl alt del. I think I am headed in right direction.  Just need to know what to load on external hard drive. 

  • Running a dos command from a java application

    hello,
    I'm trying to execute a batch file from a java application. I tried with:
    try
    Process proc=Runtime.getRuntime().exec("fop -fo "+iXmlFoFile+" -
    svg "+SvgFileName);
    }catch (IOException e){System.err.println("Error in conversion of
                               the Xml FO file into Svg file: "+e);}
    and with:
    try
    Process proc=Runtime.getRuntime().exec("cmd ./c fop
    -fo "+iXmlFoFile+" -svg "+SvgFileName);
    }catch (IOException e){System.err.println("Error in conversion of
                the Xml FO file into Svg file: "+e);}
    but i have a IOException: CreateProcess: .... error=2
    When I try these line to launch a .exe file it works but not with a .bat file.
    I also tried:
    String execstr = "fop -fo "+iXmlFoFile+" -svg "+SvgFileName;
    String [] commandArray = { execstr };
    try {
    Runtime.getRuntime().exec(commandArray);
    } // end try
    catch ( Exception e ) {
    System.out.println( e.getMessage() );
    e.printStackTrace();
    }// end catch
    but i got the same exception in java.lang.Win32Process.create
    What did i do wrong?

    Your execution string is a bit more that I want to figure out, but here are a couple ideas:
    Is the working directory of any importance? If so you'll need to set that when you do your exec()
    I think I remember reading something about batch files that couldn't be kicked off via this method. Perhaps you need to execute the string "start mybatchfile.bat". Seems like you need to do something like that to get a command interpreter to run your batch file.

  • Run Script Logic/Package from a different Application

    Hi Experts,
    I have a scenario here that I need to run a package from a different application. For example, I'm in Finance application and I need to run a package which is in the LegalApp application, is it possible to call that package or perhaps run the logic it was calling without having switch back to LegalApp.
    Thanks,
    Marvin

    To run a package that runs logic on another application, you could copy a package such as "Default Formulas" and put the name of the target application in the new package's name.  Then go to Modify Package --> Advanced.  Edit the package to set the application as below.  The LegalApp (for example) is set on the third Task command.  Default logic is called on fifth.
    PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when running logic.",1,{"Yes, check for work status settings before running logic","No, do not check work status settings"},{"1","0"})
    PROMPT(SELECTINPUT,,,,%CATEGORY_DIM%%ENTITY_DIM%%TIME_DIM%)
    TASK(Execute formulas,USER,%USER%)
    TASK(Execute formulas,APPSET,%APPSET%)
    TASK(Execute formulas,APP,LegalApp)
    TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
    TASK(Execute formulas,LOGICFILE,)
    TASK(Execute formulas,CHECKLCK,%CHECKLCK%)

  • Is it possible to run my iTunes library from an external hard drive?

    As of right now my iTunes library is rapidly out growing my mac's capacity i have 120GB hard drive and am now down to about 20GB of storage due to my ever so growing iTunes library. Is it possible to transfer my entire library and run it off an external hard drive so i can free up space on my mac?

    Hi Tnarduzzi,
    I just bought a new imac (after having my old G4 Mirror door finally give out), and I am looking to access my music folder from an external HD to this new computer.
    I have already set my preferences in the iTunes advanced tab to select the external drive and folder as my "itunes library" but nothing in my music folder appeared when I did that.
    I've done as you listed below (to choose library) but when I chose the library, it said "An itunes library file could not be found in folder..."
    The folder I am trying to access is an iTunes Library I once had on my internal hd, but moved to an external drive.
    What seems to work is going to Edit and then clicking "add to library." Is this another correct way to access my music from the external drive, while keeping all changes (ie addition and changes to library) off the internal drive?
    Are updates, addition, etc really going to the external, or am I working with two different libraries (external and internal) but I don't know it?
    Looking forward to hearing from you or anyone who can shed light for me.
    Thanks!

  • Can I run my iTunes library from an external hard drive?

    My iTunes library is too big and I need to set it up to operate from an external drive.
    How can I copy it to an external and run it out of the existing MAC?

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.

Maybe you are looking for