Running a Query via Query Monitor (RSRT) works, but Java Web does not

I am running a query via RSRT (IC_SOPSAL/Z_SOPIC_CUSTSALES_01) and this is successful. But when I run the Java Web for same Query below,
http://FQDN:59800/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=Z_SOPIC_CUSTSALES_01
We get an error, The Web template "ZWEB_TEMPLATE_001" does not exist in the master system.
our BW8 and BW3 SSO configuration on our Portal System Object connectivity are not BI master systems.
Regards,
James

Similar Messages

Pavilion dv7 laptop ac adapter problem. It works, but Windows 7 does not recognize it anymore.

The ac adapter works, and the battery remains at 100%, but the icon never switches from battery to AC. The laptop will not turn on without the battery and just AC, yet the adapter keeps the battery charged at 100%. Windows 7 will not perform some of the updates when it thinks it is running on battery.
Any ideas?

I am having the same issue with my G61. I apologize in advance for hi jacking your post and leaving such a long reply but maybe it will help both of us in the long run.
The problem started off by everyonce in a while my battery icon showing my battery needed replaced. I ran the battery tool and it said the battery was bad. I eventually replaced the battery to no avail. Here is everything that I have done and noted while dealing with this problem. After replacing the battery the battery tool would not run saying that in order for the test to work the AC adapter needs to be plugged in (computer will only work with the AC adapter plugged in). If I am using the computer and the adapter happens to come unplugged it almost instantly goes into a permenant sleep and I have to hard reset and plug the adapter back in in order to use the laptop.
The icon at the bottom of the screen does not show the battery charging. It only shows the battery in good standing and its current power level. If I remove the battery it changes to no battery present.
Some wierd things that are going on are the computer will boot up on battery power alone but as soon as windows is loading at the desktop it will go back into permenant sleep and will have to hard reset. Also the computer will not power on with the battery removed and the AC adapter plugged in but all my power indicators are lit up showing its getting power.
I just recently upgraded to Windows 7 Ultimate and performed all the updates thinking that maybe that would fix the problem. But it did not. Although now when I run the battery tool it does not tell me to plug in the AC adapter. It goes through the process and tell me that everyting is OK and my battery checks out fine.
One thing that gives me hope that its a software issue is that I have no issue using the battery when running Windows in any version of SAFE MODE. I can run it till the battery dies without it going into permenant sleep.
I have read that it could be a motherboard issue but not sure how to verify. Any help to help us figure this out would be fantabulous.

1 email account works, but gmail account does not?

have 2 email accounts, mac. acct works but gmail quit sending and receiving on computer two days ago?

Hello, is your gMail POP or IMAP?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the exact message?
Then click the Show Details button & Check again.

HT4864 I use Outlook 2011 for Mac. My @me works but the @ mac does not.

I use Outlook 2011 for Mac on a 2011 MacBook Pro. My @me mail works but my @mac mail does not.

I'm not familiar with your Bose but perhaps the phone is muting the music so you can hear the call.

My netflix account used to work, but now it does not. Only the "my account" page is accessible and not the main page. Major problem. Please help. I'd rather run an older version than one that doesn't work.

I believe I was running a 6.3.as.df,msad.f,masdf version of Firefox and my Netflix account was working wonderfully well. I happened to hit the quit button last time, instead of the save and quit button and for some reason, Netflix did not load properly. I cleared the day's history, as usual, and tried again. This usually works. I closed Firefox and tried to reopen it, but it said Firefox was already running, that I would have to restart my computer to solve the issue. I did that twice. Finally, I noticed Firefox was trying to download a new version -- even though I don't recall asking it to do so. Now I'm running 7.0 and my Netflix page doesn't work. I am logged in - great - but I can only access "My Account and Help" page and "Viewing History" but nothing else. Lame! I would love to know how to get this to work. I can't even pull up Netflix's main page on its own. All other websites seem to be working properly. PLEASE ASSIST!

If this were just a Netflix problem, why can I access Netflix through Internet Explorer and not through Firefox? I've been using Firefox to access Netflix for at least the past year and starting yesterday (12/6/11) Firefox doesn't seem to recognize that Netflix exists. I've tried the suggested Firefox "help" which was of no help whatsoever and may even have made life more difficult in accessing other accounts. Anyone know how to contact Netflix or Firefox by phone?

Connected monitor works, but the comp. does not "see" it

ello,
When i plug in a monitor it will clone the display, but system prefs only shows the laptop LCD

Hello, I believe that is the case when the Display is "Mirrored"... how else could it be? You can't change the Rez or Depth of one without the other, can't drag the MenyBar/Dock to the other one!
If they are Extended Displays, they do show up as separate ones.
They're essentially one Monitor when Mirrored.

::.jsp page is working But .java file is not working::

Hi,
I have made a jsp page in that i am able to fetch data from Oracle 10g XE,Using jboss-4.0.4.GA .Its working fine.
Problem: But when i made the same file in .java. i am able to compile the file but not able to run the file.
Evnironment setting are like:
User Variable::
JAVA_HOME
C:\Program Files\Java\jdk1.5.0_03
CLASSPATH
C:\Program Files\Java\jdk1.5.0_03\bin
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.zip;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14_g.jar;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\orai18n.jar;
System Variable::
PATH
C:\oraclexe\app\oracle\product\10.2.0\server\BIN
Here is my Code:
package com;
import java.sql.*;
import oracle.jdbc.pool.OracleDataSource;
import java.io.*;
class GroupedData
     public static void main(String []args) throws Exception
          OracleDataSource ods = new OracleDataSource();
          ods.setUser("system");
          ods.setPassword("shekhar");
          ods.setURL("jdbc:oracle:oci:@");
          Connection conn = ods.getConnection();
          Statement stmt1 = conn.createStatement();
          ResultSet rs1 = stmt1.executeQuery("SELECT * FROM TEST");
          //Loop through results of query.
          while(rs1.next())
          System.out.print(" |" + rs1.getString("C_IMSI") + " |");
          System.out.print( rs1.getString("C_SIM") + " |");
          System.out.print(" " + rs1.getString("C_NAME") + " |");
          System.out.print(" " + rs1.getString("C_ADDRESS") + " |");
          System.out.print(" " + rs1.getString("C_CITY") + " |");
          System.out.print(" " + rs1.getString("C_STATE") + " |");
          System.out.print(" " + rs1.getString("ASPLDESC") + " |\n");
          Statement stmt = conn.createStatement();
          ResultSet rs = stmt.executeQuery("SELECT ASPLDESC, COUNT(ID) AS OCCURANCE from TEST GROUP BY ASPLDESC");
          //Print start of table and column headers
          System.out.println("| ASPLDESC | Total Occurance |");
          // Loop through results of query.
          while(rs.next())
               System.out.println("| " + rs.getString("ASPLDESC") + " | " + rs.getString("OCCURANCE") + " |");
Here is my jsp file which is working fine with JBOSS:
<%@ page import="java.sql.*" %>
<%@ page import="oracle.jdbc.pool.OracleDataSource" %>
<HTML>
<HEAD><TITLE>Simple Oracle Example</TITLE></HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER>
<B>XID Report generation</B>
<BR><BR>
<%
OracleDataSource ods = new OracleDataSource();
ods.setUser("system");
ods.setPassword("shekhar");
ods.setURL("jdbc:oracle:oci:@");
Connection conn = ods.getConnection();
Statement stmt1 = conn.createStatement();
ResultSet rs1 = stmt1.executeQuery("SELECT * FROM TEST");
//Print start of table and column headers
out.println("<TABLE CELLSPACING=\"0\" CELLPADDING=\"3\" BORDER=\"1\">");
out.println("<TR><TH>C_IMSI</TH><TH>C_SIM</TH><TH>C_NAME</TH><TH>C_ADDRESS</TH><TH>C_CITY</TH><TH>C_STATE</TH><TH>ASPLDESC</TH></TR>");
//Loop through results of query.
while(rs1.next())
out.println("<TR>");
out.println(" <TD>" + rs1.getString("C_IMSI") + "</TD>");
out.println(" <TD>" + rs1.getString("C_SIM") + "</TD>");
out.println(" <TD>" + rs1.getString("C_NAME") + "</TD>");
out.println(" <TD>" + rs1.getString("C_ADDRESS") + "</TD>");
out.println(" <TD>" + rs1.getString("C_CITY") + "</TD>");
out.println(" <TD>" + rs1.getString("C_STATE") + "</TD>");
out.println(" <TD>" + rs1.getString("ASPLDESC") + "</TD>");
out.println("</TR>");
out.println("</TABLE>");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("SELECT ASPLDESC, COUNT(ID) AS OCCURANCE from TEST GROUP BY ASPLDESC");
//Print start of table and column headers
out.println("<BR><BR><TABLE CELLSPACING=\"0\" CELLPADDING=\"3\" BORDER=\"1\">");
out.println("<TR><TH>ASPLDESC</TH><TH>Total Occurance</TH></TR>");
//Loop through results of query.
while(rs.next())
out.println("<TR>");
//out.println(" <TD>" + rs.getString("ID") + "</TD>");
out.println(" <TD>" + rs.getString("ASPLDESC") + "</TD>");
out.println(" <TD ALIGN='RIGHT'>" + rs.getString("OCCURANCE") + "</TD>");
out.println("</TR>");
out.println("</TABLE>");
%>
</CENTER>
</BODY>
</HTML>

user552380,
You don't need three different JDBC drivers in your CLASSPATH, only one.
Are you getting an error message?
If you are then please post the entire error message and stack trace you are getting.
Note that you can use the [ code ] and [ /code ] tags (without the spaces) to format
your code.
Good Luck,
Avi.

You must connect to Microsoft Exchange with your current profile before you can synchronize your folders with your outlook data file (.ost).... OWA works but outlook 2013 does not, exchange server 2013 on Server standard 2012

I have read a lot of articles and tried a lot of things, but I cannot get outlook to connect to my exchange server. This is a test environment, I have tried making my own certificate and signing it through my own CA to no avail. I have completely disabled
windows firewall and stopped the service. I can ping between the two just fine by name or IP. I've tried not using cached mode, creating new profiles in outlook etc. I tried setting my CertPrincipalName to my FQDN in exchange powershell.
I am not an expert with exchange at all, but I feel like this should work with little to no configuration, instead I've wasted days on this. Half of the articles I've read don't seem to have solutions, and the other half have solutions that are not working
for me.
I can access OWA and send emails on a client computer through OWA with no problems.
I am running a test domain on the same network as my current exchange 2003/sbs 2003 active environment, I don't know why this would be an issue, but if it is I cannot figure out why. The only thing I can see holding me back right now is not having a signed
certificate from digicert etc, and an official internet domain set up, but I don't think either of those things matter in my situation.
Any help is greatly appreciated and I'll gladly provide any other information requested to solve this issue, thank you.

I have a similar setup and also have the same error. Did you find a solution for this?
In the managed availability - monitoring log I see the following errors:
EMSMDB.Connect() step of ComplianceOutlookLogonToArchiveRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0150000
ActivityContext:
Outline: [15] RpcProxy connectivity verification; [117999][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:47:11 AM
- ErrorDetails =
- Latency = 00:00:00.0153816
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:47:11 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:49:09 AM
- Exc
and
EMSMDB.Connect() step of OutlookRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0250000
ActivityContext:
Outline: [13] RpcProxy connectivity verification; [118011][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:23:20 AM
- ErrorDetails =
- Latency = 00:00:00.0132417
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:23:20 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:25:18 AM
- Exc

Itunes comes up an the store works but the library does not

tried to update itunes that failed,, have uninstalled an reinstalled,, itunes wont come up,, when i use a restore point to go to an older version itunes comes up,, but,,, the store works,, when i try to go to my library it is stuck on my movies,, if i try to change to something else it shuts down,, i searxh my music on the toolbar but when i click on my music itunesshuts down,, afraid to plug my phone into it so not sure how that will work
am running windows 7
latest version of itunes untill this last update an everythin went to heck
also when tried to reinstall it tells me moblile device not found,, so ihave to ignore that to install...

Gave it a look, tried all the troubleshooting. My IP addresses are the same, so now I really don't understand. I'm just super confused. If it hadn't ever worked, I would just write it off as my university network being too strict... but now that it has worked once and really... nothing changed... I am just very confused.

I paid for adobe reader to convert pfs to excel. It used to work but now it does not. I get "error while siging in message" but I am signed in. Please fix this or advise.

Adobe no longer converts pdfs to Excel or Word. I continually get error while signing in message. But I am signed in. I paid for service and expect it to work. I can get no help form adobe. Please help now.

Hi adoberror,
I'm sorry that you're having trouble with ExportPDF. Can you please try the following to resolve this sign-in issue:
Choose Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac)
Click 'Adobe Online Services' on the left-hand side
Sign out of our Adobe ID and sign back in.
Try to convert your document again.
If you continue to have trouble, please verify that you can access the service via the web interface. To do this:
Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
Try to log in with your Adobe ID (email address) and password
Once logged in, follow the on-screen prompts to convert a file
Please let me know how it goes.
Best,
Sara

[code]javac[/code] works, [code]java[/code] does not work.

I have installed the Java 2 SDK Standard Edition v1.3.1_01. I have set the path in the autoexec.bat file. I created the file WhatsUpDoc.java containing:
public class WhatsUpDoc{
public static void main(String[] args){
System.out.println("What's up Doc?");
}At the DOS prompt, when I type: javac WhatsUpDoc.java there is no compilation error and the WhatsUpDoc.class file is created. But, when I type java WhatsUpDoc at the DOS prompt, I get:
Exception in thread "main" java.lang.NoClassDefFoundError: WhatsUpDocI have compiled several applets working just fine on a web page. Why I cannot run this simple application?
Thank you for your help.
Michel Cariotis

I have installed the Java 2 SDK Standard Edition
v1.3.1_01. I have set the path in the
autoexec.bat file.What have you set the CLASSPATH to? It should be ".;%JAVA_HOME%\jre\lib\rt.jar". It looks like the CLASSPATH is wrong, so java can't see the class in the current directory. :-/
Bhav

Yesterday my EHD worked, but today it does not even show up

Hello! Need of help.
Context. I speak a little mac, but please dumb stuff down for me - like give me processes, otherwise I get a bit lost
Yesterday my EHD worked.
I haven't changed anything. Although I did recently run a software update (I'm on LION)
Mac OS X Lion 10.7.5 (11G63b)
Today it doesn't work.
I've tried plugging it into the other usb port but still nothing. I tried resetting but still nothing. I tried blowing into the ports. Nothing.
I tried a few things on the support forum including running something through terminal, I can't really remember what I did but that didn't work.
I also tried doing a disk repair thingo but I'm pretty sure the EHD wasn't listed on the left bit.
I have a usb stick and that is being detected by the macbook. Just nada when it's my ehd.

The point though is you still have your data. Had it been the internal hard drive that failed you would have the external to work from. Remember, any hard drive can fail. In fact IT professionals will tell you that there are two types of hard drives - those that have failed and those that are going to fail. The only question is when.
Many external hard drives come with warranties, how long they are depends on the manufacturer. Give them a call, you may be able to get a new one for free. Worth a shot, anyway.

K Connect to server works, but Windows SHARED does not show in Finder

I hope this helps others:
My network has one Leopard and two Windows XP's, one of which would always show up within approximately 5 minutes in the Finder right column under SHARED, but the other never would. Both were accessible if I performed an K to smb://<ip address>. I finally found the difference and now both appear in SHARED.
On the Windows machine goto ControlPanel>NetworkConnections and right click for Properties on the connection being used in the network. In the Properties dialog select the Properties button for the 'Internet Protocol(TCP/IP)' line item. In the TCP/IP Properties under the General tab select 'Advanced' at the bottom of the dialog panel. Then select the WINS tab. Uncheck 'Enable LMHOSTS lookup' (this may have an adverse effect if your network relies on it) and check 'Enable NetBIOS over TCP/IP'. If 'Default' is checked sharing worked fine between the Windows systems, but Leopard never listed the SHARED in Finder.
After making the change I restarted Windows and Leopard, and the Shares were finally listed in Finder.

I found that the WINS error was because /etc/smb.conf includes /var/db/smb.conf which has a 'wins support = no' line in it.
I also found that if I prevent Leopard from becoming the local master, Windows shares always appear in Finder within 5 minutes of the PC coming onto the network. To accomplish this I added the following to /etc/smb.conf:
os level = 0
local master = no
Note, the default smb.conf sets 'os level = 2'.
This from the Samba doc explains the 5 minutes:
+It is possible to configure two Samba servers to attempt to become the DMB for a domain. The first server that comes up will be the DMB. All other Samba servers will attempt to become the DMB every *5 minutes*. They will find that another Samba server is already the DMB and will fail. This provides automatic redundancy should the current DMB fail. The network bandwidth overhead of browser elections is relatively small, requiring approximately four UDP packets per machine per election. The maximum size of a UDP packet is 576 bytes.+
Message was edited by: xnav

A recording that works but the lsmw does not

Hi,
I have created a recording of the process which successfully changes the collection specialist in the collections managemenet role in the BP transaction.
When I process data using this recording in lsmw the batch runs fine and tells me that all transactions processed successfully. However on checking the business partners none of the changes have in fact saved.
Running the batch in foreground flows exactly the same as performing the manual change with the exception that there is no success message at the botton of the screen after the save button is pressed.
Has anyone seen this behaviour before and know how to get the transactions to save correctly in SM35?
kind regards,
Ross Goodman

Hi Rahul,
I have recorded transaction BP. I just noticed too that in fact the last transaction always saves to the database, but all transactions before that report as running fine in SM35 but in fact make no change. In lsmw when you look at the process log all the "BP nnnnn was changed" messages refer to the bp in the last transaction!!
Ross

I cannot log in to my site on this browser but can on others. It did work but now it does not?

For some reason after working for months when the home screen of my site appears and I have to log in the page just takes me back to the log in again. I have tried this on other computers using Firefox and the problem is repeated. If I change browser I can log in without issue. This problem only started today. I have cleared history and started again and get the same issue but only on Firefox. I am using version 21.0 can you help?

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Running a Query via Query Monitor (RSRT) works, but Java Web does not

Similar Messages

Maybe you are looking for