Running a Repair for Office 2010 via SCCM 2012

Hello,
We have come into a bit of an issue. We're attempting to deploy & install Service Pack 2 for Microsoft Office 2010, however it fails, after some research it looks like it works if we run a repair on Microsoft Office.
Is there anyway we can do this via SCCM? because we need to run a repair on 5000 machines.
Any ideas?
Jay

Take a look at the following.
http://social.technet.microsoft.com/Forums/office/en-US/75d50085-28b4-400b-97d4-77203c173352/repairremove-office-2010-silently
Only caveat is it states 'Make sure that no Office applications are running when you try to repair/remove Office 2010.' Not sure how you would control that in the real world.
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

Problem deploying Office 2010 via SCCM 2007

Hello,
I have a problem with deploying Office 2010 to Workstations.
I did exactly as instructed settings: http://technet.microsoft.com/en-us/library/ff404178(v=office.14).aspx
When you release it manually (I tested it) everything went fine but when I let you install via SCCM 2007 workstation, just run setup.exe and processes stuck there and nothing happens.I have no idea why setup.exe. What is wrong any ideas?
(It does not matter who's office: 013,010,07)
Thanks

Are you using any silent key like setup.exe/s S or setup/quite etc.. ??
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights
No, should i? Microsoft does not say anything like that... Name field,
which in this example is named Office 2010 silent installation.
In the Command line field,
in this example type setup.exe.
Of course I'll try but I do not suppose this helped ...

Cannot download cumulative update for Office 2010 December 2014

I tried to download the cumulative update for Office 2010 (December 2014) at the following link:
https://technet.microsoft.com/library/dn789213(v=office.14)
When you click the link (http://support.microsoft.com/kb/KB3020815) you get to an "oops" page.
Oops!
The page you are looking for may have a new location, or is no longer available.
Does anyone have a link that works for that update?
Thanks,
--Jeffrey

Hi Protholl,
I visited the link you provided:http://support.microsoft.com/kb/KB3020815 , got the same result "Oops! The page you are looking for may have a new location, or is no longer available."
Please visit this link instead:
http://support.microsoft.com/kb/3020815
You should open the page with no issue then.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to export Registry values for Office 2010 in HKLM.

Hello,
I am trying to export all the Registry keys for Office 2010 in HKLM. All the Office 2010 based registry values in HKLM will be exported and need to be resotred after installing Office 365. So I need to export all the HKLM based Office keys before installing
Office 365 so later it can be restored.
Thanks
Ekta Verma

Then change the group policy, that's the solution to your problem. You've made the investment in Office 365 - forcing Office 2010 to launch is wasting that investment.
But what you are proposing won't work anyway, you would need to capture all of the keys and values in
HKCR\.doc, HKCR\.docx, etc, etc, etc for all of the file types.
Collecting all the registry values, crafting a script to put them all back, and managing that effort is a waste of time when the group policy could be changed in a matter of minutes. If someone argues against changing the group policy then tell them
to tell the guy who approved the purchase of Office 365 that he wasted the company's money.
If, on the other hand, you don't want users to launch Office 2010 yet, that's another story and I could go on and on debating both sides of the argument. Instead of spending the time mucking around the registry, try to repair Office 2010 instead:
msiexec /f <product code> /q
you can get the product code from HKLM\Software\Microsoft\Windows\CurrentVersion and just search for microsoft office from there. The key name it's in will be the same as the product code, which would also appear in the Uninstall registry value.
I hope this post has helped!

KMS Host for Office 2010

AOA
I deploying windows server 2008 r2 KMS Host successfully. Now, trying to use same machine as KMS Host for Office 2010 Professional Plus. I have adopted for activation through phone. Confirmation ID from Microsoft got it. Error encountered while installing Microsoft
Office 2010 KMS Host License Pack:
"Error Code: 0x2a 0xC004F015, The software licensing service reported that license is not installed"
Tried every page GOOGLE asked but in vain,
Really stuck up and help required.
Thanks in advance.

Dear, I obtained new product key, confirmation key from MS but still no success. really at stake and guys at Microsoft are also not replying positively.
Following error is stucking my eyes and mind
C:\Windows\system32>cscript.exe slmgr.vbs /atp xxx-xxx-x-xx-x-x-x-(Confirmation
ID provided by Microsoft) bfe7a195-4f8f-4f0b-a622-cf13c7d16864
it gives following output
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0xC004F04D' to display the error text.
Error: 0xC004F04D
when run this command
C:\Windows\system32>slui.exe
0x2a 0xC004F04d
Output
is
The
software licensing service determined that the installation (IID) or the confirmation ID (CID) is invalid
Thanks in advance.

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, merge the calendars on the Iphone so there is only 1 calendar to sync?

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

Unable to do BPC for Office Installation via BPC Client software

Hi,
I am trying to install "BPC for Office Installation" via the client software center. I get an error "You do not have authority to install the BPC for Office.".
I am on Windows 7 Home premium. My username is the only name on the computer and has admin rights.
I did browse through a few threads in this forum and as per the suggestions, I installed .NET 1.1 and service pack for it.
I also modified the "hosts" file in system32\drivers\etc to include the lines I need.
IT STILL DOESNT WORK !
PLEASE HELP!
Regards,
Tagz

Thanks for your response Patrick!
I enable the Intranet option as per the note and added the website to my zone in the browser security option.
I get case 2 error as per the note. I tried going to the next step. Now it says "Not enough memory. A minimum of 64 MB of memory is required.". My computer though has 4GB memory.
Please advice!
Thanks,
Tagz

Multiple calendars have appeared on my iPhone and I am unable to sync all of them to my PC running Windows 7 and Office 2010. How can I sync all the calendars, or, alternatively, merge them?

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

Manual formatted for C: and D: drive Via SCCM 2012 task sequence

Dear All
i have a problem with the formatting of the HDD by using SCCM 2012 , our Co. have laptops with C: &
D: drive and we started to implement our W7 migration by using SCCM 2012 and we face the a problem which is how to keep the data of the D drive either during the deploy the new W 7 image our after we deployed the image with C and D drive .
we create a task sequence to format the whole HDD and then make two partition .
but our target to keep the old users data in D: drive in case of system crash .
so can we do the format issue manually via task sequence to can control the size of the HDD and just
format the C: drive
i read in internet there is a Disk partition script can be apply during the task sequence activity to control
the formate issue.
or to stop the formatte issue for D: drive via SCCM.

Dear EminM
thanks
for your replay
you are right i mean the laptop has C and D partition
we make a TS which was configure to crate two partition
After we complete our Task sequence we face problem that TS format the two partition and that mean we will loss the data in D partition in case we need to apply this TS in the future to any laptop has system crash .
our target to have TS just format the C partition and leave the D partition without any action to be able to save the data in the D partition without any corrupted.
for that do you have an idea to do that TS .

KB2837583 CU for Office 2010 Professional Plus breaks multiple line fields document information panel

When we install CU KB2837583 for Office 2010 Professional Plus I get an error on the document information panel in Word while saving the document to SharePoint 2010.
The error shows a red border around the multiple lines field "Adres" saying that the field contains errors.
We had this issue before with CU
KB2760758, this was a bug and Microsoft has fixed this with Service Pack 2. Now we have the same issue again with this cumulative update.
Microsoft knows this bug and
is working on a solution?

Hi,
As the error message, please try the workaround:
Uninstall the KB2826026 update patch.
Quote from:
http://social.technet.microsoft.com/Forums/en-US/b867398d-93fb-4015-82ee-e00f75a671d4/sharepoint-ms-word-document-only-specific-pattern-allowed-only-data-in-the-following-pattern-is?forum=officeitproprevious
Regards,
George Zhao
TechNet Community Support

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Lync 2013 client deployment via SCCM 2012 forcing restart

All,
I am attempting to deploy the Lync 2013 x86 client via SCCM 2012 to 158 machines running the Office 2010 suite. My package runs, and the installs complete but they are forcing a restart after the install even though I have gone in to everything that I can
think of to tell the install not to force a restart. I am a newb in the ways of SCCM so I have been self teaching, and I may have missed something.
I have gone into the config.xml and changed the value SETUP_REBOOT to NEVER.
In the program properties I have RUN set as HIDDEN, and AFTER RUNNING set to NO ACTION REQUIRED.
Is there something that I am missing to stop the users machine from restarting after the install completes?

Great, unfortunately it will be because files (usually shared DLLs) are in use as Office is opened, despite it being an older version.
Agree it's not optimal, I usually just tell clients that they will need to reboot, or that it will push out overnight (when I schedule it) and their computer will restart, so make sure they save everything.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

Handling of pending reboot, exclusive updates for patch management with SCCM 2012

Hello,
Planning to use SCCM 2012, I would like to understand how smart is SCCM 2012 when dealing with specific patch management situation.
Assuming I have the following:
- A given server to be patched is missing a lot of updates, several being mutually exclusive. This typical case will require several reboot / patching to properly obtain a server fully up to date.
- A given server to be patched is in pending reboot state because the local admin installed new software and has not restarted the server yet as requested
- Those servers have configured maintenance windows of 2 hours during each night. I scheduled a deployment of missing patches authorizing restart.
--> when the maintenance window will be reached:
- will the server first be restarted to clean the pending reboot ?
- will the the server be patched / restarted several times as required to fully meet the updates to be deployed.
Another scenario on workstation side:
- can I enforce deployment of updates at a given time, do not automatically restart the workstation during patch deployment, but after deployment schedule a mandatory restart with a countdown if there is a pending reboot... From end-user perspective, it
would have the following behavior. For instance:
- patches are automatically installed on Monday at 10 AM
- as soon as deployment is done, warning message is displayed to ask users to reboot
- then user has up to 48h to restart his computer by himself. If he does not do it, it will be automatically done after countdown expires.
--> Can such a scenario be managed by SCCM 2012 ?
Regards.

Hi,
I have a related question about deploying Microsoft Security Updates to workstations via SCCM 2012. Is there a way to deploy the MS updates to workstations and only suppress reboots for machines with users logged on or locked? There seems to
be only 2 different options for reboots, Suppress them all or don't suppress them at all. We would like SCCM to reboot the machines that are logged off, but suppress the reboot for those that are logged on, while at the same time, provide the user with
a notification that their machine needs to be rebooted (at their convenience).
We've tried applying the Domain GPO "No auto-restart with logged on users for scheduled automatic updates installations" (Enabled) and "Configure Automatic Updates" (Disabled), but the logged on/locked machines still receive the restart countdown with no
option to postpone or delay.
This is a show stopper for us since we have an environment where we are absolutely not allowed to reboot a logged on machine.
For a little background, we are coming from SMS 2003 and the Distribute Software Updates (ITMU) way of deploying MS Updates, where we could always set the program to run "Only when no user is logged on".
Please tell me there is a way to achieve our desired result.
Thanks,
Dan

App-V 5.0 SP2 user applications published via SCCM 2012 to VDI workstations with roaming only

Hi,
The environment consists of App-V 5.0 SP2 (KB2956985) user based applications published via SCCM 2012 to Windows 7 VDI snapshotted workstations that are reset at user logoff.
When a user logs on the SCCM 2012 client initiates App-V client package publishing. After a couple of minutes after logon the shortcuts appear and the user can launch their applications.
The issue is that at logoff, even with roaming enabled, the publishing information disappears. This causes the next logon process for that user to repeat, the applications are not available until the SCCM client has completed it's publishing cycle.
Roaming profiles are implemented. %APPDATA% is redirected to a UNC path. The following registry key is set
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\Client\Integration\PreserveUserIntegrationsOnLogin=1
U-EV, global publishing of applications, and AppLocker rules are not an option. Also, I have read this already - http://technet.microsoft.com/en-us/library/dn659478.aspx#BKMK_PE
I do not want to wait for the SCCM client to kick in prior to the user applications being available. What do I need to roam or run to create a seamless transition for the user between sessions?
Eddie.

Hi Tywin (bad username considering the last GoT Episode ;))
If you ask Microsoft, they always recommend using SCCM for deploying App-V packages and reuse your current SCCM infrastructure if that is already in place. Problem is, as you now experience, is that there is some big caveats both in regards to publishing
time and to roaming of settings.
As Nické states I would suggest looking into the Full Infrastructure Model for App-V 5.x, which gives you much better performance in what I call "from no apps" to "being able to click the shortcut" - the add and publishing phase. If you don't have the time/budget/whatever
to start looking into that, you could look into some community tools like App-V Scheduler which is developed specific by Citrix guys to ease the publishing and management in a Citrix world.
Microsoft have a great article about Performance Guidelines, which you have read, but it mostly presumes you work with Full Infrastructure. Have you looked into Steve Thomas' session from TechEd NA? It talks about "implementation trends".
Senior Consultant at Atea Denmark - http://Atea.dk Atea Technical Evangelist for App-V NoLightPeople - http://NoLightPeople.com Access Director - http://www.nolightpeople.com/index.aspx#accessdirector

How to update Office 365 using SCCM 2012 R2?

Hi,
I am using SCCM 2012 R2 and Office 365 ProPlus.
At products list (Software Update Point Components Properties) there is not Office 365.
Office 365 automatically updates from Internet.
I need to know the following:
How to disable Internet automatic updates at Office 365
How to deploy updates for Office 365 from SCCM.
Thanks in advance!

Funny thing you can't deploy those updates via WSUS and/ or ConfigMgr. See for more information:
http://blogs.technet.com/b/office_resource_kit/archive/2014/01/21/managing-updates-for-office-365-proplus-part-1.aspx
Also, make sure to read part 2 as it provides dome guidance on controlled testing of those updates.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Running a Repair for Office 2010 via SCCM 2012

Similar Messages

Maybe you are looking for