Running AdobeSerialization on KBOX/KACE K1000?

We need to remotely run the serization tool we created with AAMEE 3.0 as either a managed install or a script on though our K1000. I've basically tried to zip up the tool, the prov.xml file and various shell scripts and .command files to try to get it to run. Using a KACE script, I haven't gotten much farther than transferring the zip file to the dependency directory. Has anybody managed to do this?
We don't have ARD or any Mac management tools here beyond the KBOX and have a huge, multi-campus VLAN.
Any suggestions would be welcome.
Thanks,
Ric

All I use is c:\adobe\adobe_prtk.exe --tool=VolumeSerialize --provfile=C:\adobe\prov.xml and that has worked well for us.

Similar Messages

Remote deployment switches for Jabber 9.2.2

Are there any installation switches for remote install via the MSI/DMG?
I will be pushing this backage via Dell KACE K1000 appliance and would like to configure default options for the users during the install/upgrade such as Disabling (or 'unchecked' following initial sign-on) the Docked Window, configuring Phone Accounts, WebEx Meeting and application Integration settings.

application integrations setting mostly get pushed out through the profiles on CUPS that get pushed out as soon as the user logs in.
I can't help you out with all the switches you asked for but, you can starting using:
msiexec.exe /i "\\lsrftufs1\ict\Networks\Voice\Jabber\Jabber 9.2.2\CiscoJabberSetup.msi" TYPE=CUP DOMAIN=somedomain.com.au LANGUAGE=1033
This will at least use auto discovery of the presence server if you use an SRV record _cup._login.somedomain.com.au
so at least your useers wont have to type in a presence server name or IP.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

CS6, AAMEE 3.1 - serialization file still prompts to sign in

So I've had the same issue I've seen other's dealing with - pretty much exactly the same as http://forums.adobe.com/message/4467285. I've placed AAMEE 3.1 trial packages of my volume-licensed suite into a master image and deployed it to other computers (using WDS). I created the serialization file with AAMEE 3.1 and have tried to run those on the computers with the trial packages. I am running:
AdobeSerialization.exe --tool=VolumeSerialize
The prov.xml file is in the same folder, but just for the sake of being thorough I added the --provfilie=[path] bit. I also saw a reference to a "--stream" parameter. I have no idea what it does but I tried it to. All of these attempts result in a result code of 0 and the programs in the suite open. However, the program immediately requests that the user signs in with an Adobe ID. It's ridiculous because it reports that I now have approximately 90 years until the software stops working. This is super obnoxious that my users have to dismiss this message each time they wish to load an Adobe product. What am I missing here? How can I just make my programs run with no pop-ups like they always used to? Thanks.

Hi I have the same problem in that after using the previously created prov file, the software insists that I sign in with an Adobe ID, and like tomferratt, I do not intend to ask my uses to dismiss this message everytime they wish to use your products, I have tried this so called fix you have mentioned above but to no avail, surely there must be an easier way to license your products for users who do not, nor ever will be able to connect to the internet. It seems that Adobe are trying to dictate that all users who have the misfortune to require their products to do a job need to be internet connected, well in the real world this is not an option for everyone, so please please please come up with a solution that is easy and stress free for us poor users who cannot connect to the intenet from our office enviroment.

Adobe CS6 Trial

Hi,
I have Adobe CS6 Master Collection installed on my master image in trial mode. I serialize CS6 after sysprep is complete using the serialization .exe. All works well. The question I have is:
1. When the trial period expires for Adobe CS6 on my master image, how can I run updates to keep it up-to-date? I'm assuming it won't allow me to update the suite. I manually update the suite on my master image.
Do I need to serialize the CS6 suite on my master image then deactivate the suite before sysprep?
Thanks,
Ivano

Hi Ivano,
To answer your question -
1. Trial expires after 30 days.
2. Updates can be applied using RUM. please download RUM from - http://labs.adobe.com/downloads/aameetools.html
its documentation is available here - http://labsdownload.adobe.com/pub/labs/aameetools/aameetools_rum_docs.pdf
If you want roll out image where you have deployed Master collection, then install a trial package on one machine, creates its image and roll out image to other machines. Then run AdobeSerialization executable on all machines to serialize it.
thanks,
Rahul | [email protected] | Adobe Systems

Issues with running permission scripts on Hoted desktop via Citrix and when deploying via SCCM

I am running a permissioning VBScript which runs when I do a standalone insallation manually running the power shell commands to add and publish the application.
This only runs vis SCCM when a machine installation is acrried out but not a per user installation. Any ideas?
The same script seems to run sometimes & sometimes does not on a hosted desktop with aps publish via citrix from the appv server. Any ideas?. A coppy of my Deploymentconfig.xml file userscript section that calls the script is below
<UserScripts>
      <StartProcess RunInVirtualEnvironment="true">
        <ApplicationId>[{AppVPackageRoot}]\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe</ApplicationId>
        <Path>[{AppVPackageRoot}]\..\Scripts\AdobeSerialization.exe</Path>
        <Arguments>adobe_prtk --tool=VolumeSerialize --provfile=[{AppVPackageRoot}]\..\Scripts\prov.xml</Arguments>
        <Wait RollbackOnError="false" />
      </StartProcess>
      <StartVirtualEnvironment>
        <Path>WSCRIPT.EXE</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\VFSCACLS.vbs -guid 6d0756af-b755-493b-8cee-4299e8666978 -error -name "Adobe Photoshop CS6"</Arguments>
        <Wait RollbackOnError="false" />
      </StartVirtualEnvironment>
    </UserScripts>
The guys in the build team reckon this is an application issues but I can't see how it can be if the applications runs when manually calling the powersehell commands. Also like I said on the Hosted desktop one minutes the script runs and one minute it does
not.
Can someone help please?

Hello,
If deploying the application to the user, and the configuration file is updated as part of the content and distributed to the DPs, and then downloaded to the client and the client is enabled to run scripts - no I never had that issue.
If I had something which didn't work I would usually verify what is on the Distribution Point?
You can download the SCCM 2012 R2 toolkit to verify what is on the DPs;
http://www.microsoft.com/en-us/download/details.aspx?id=36213
If it is deployed to the client - it means you can read the client log-file from SCCM. See the AppEnforce.log as a potential candidate;
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_AppManageLog
If it gets properly parsed by the App-V Client you can check the App-V event logs, see Tim Mangans blog post about enabling further debug-logs;
http://www.tmurgent.com/TMBlog/?p=1247
As I can't see what is happening within your Environment I would redo all the steps and verify what the results were of each step. If one step fails, I would then post what step I had performed up until that point, what the result were of each step and what
was happening within the final step that I would consider a failure.
Nicke Källén | The Knack| Twitter:
@Znackattack

Serializing Multiple Products with AdobeSerialization.exe Tool

Is it possible to serialize multiple products at once with the AdobeSerialization.exe Tool?
For example, I have created Trial packages for Adobe CS6 Design and Web Premium as well as Adobe Premiere Pro CS6 and installed them on the same machine. Can I somehow chain the serialization step together with one command, or do I need to store the XML files in different directories (or rename them in the same directory) and run the AdobeSerialization.exe tool multiple times?

Well I tested the solution with creating different directories and it turned out that only the last command run will be the activated product.
In my enviornment I have both Design and Web Premium and Production Premium
What I wanted to do was to install both editions on a master image and then later deploy it to other computers.
So I read the documentation and thought that this new way of making a trial package and the later a serialization package would be great.
This also work if you only install one edition. I use FirstLogonCommands to activate and the later delete the folder. And then I thought that it would work when I ran extra commands.
I would first activate Design and Web Premium and then afterwards delete that folder(The one with the AdobeSerialization.exe and prov.xml). This works with just one product to activate
Then I would activate Production Premium and afterwards delete that folder. This activated the Production Premium package and somehow erased the activation of the Design and Web Premium.
To test it further I tried changing the order of the FirstLogonCommands so that it would activate Production Premium first and afterwards activate Design and Web Premium. Result: Design and Web Premium was activated and Production Premium was still a trial.
So from my research atm its not possible and maybe Adobe havn't thought about that scenario when they made these changes to activate each machine.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Report developed in 6i and open and run in 10g, Web Layout is not working

Hi,
Initially reports were developed in Reports 6i now we need to convert into 10g. I just opened the .rdf in Reports10g. Report is successfully running in paper layout and showing the data. But when i try to run the report in Web Layout im getting a BLANK INTERNET EXPLORER SCREEN. Why is it so? What should i do to run my report successfully in Web Layout? When i see Web Source, i am seeing the below code,
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
<%@ page language="java" import="java.io.*" errorPage="/rwerror.jsp" session="false" %>
<%@ page contentType="text/html;charset=ISO-8859-1" %>

<html>
<head>
<meta name="GENERATOR" content="Oracle 9i Reports Developer"/>
<title> Your Title </title>
<rw:style id="yourStyle">

</rw:style>
</head>
<body>
<rw:dataArea id="yourDataArea">

</rw:dataArea>
</body>
</html>

Please, guide to achive the Web Layout Report.
Thanks & Rgds,
M Thiyagarajan

Hello,
The answer is in the Migration FAQ :
When I open an Oracle6i Reports Developer report in the Oracle Reports Builder 10g and run my Web layout, I get an empty Web page in my browser.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm#368
Regards

Error while running a Java Program

Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards

Error while running a report

Hi all,
I am getting this particular error while running a report. The error is:
<b>SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 </b>
Could anyone tell me what that means?
Thanks In advance,
Raj

Hi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh

Error While Running a page on JDeveloper

Hi All ,
I am getting the following error while running a page in Jdeveloper . Can any body help me?
(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier ; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862) at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ## Detail 0 ## java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583) at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983) at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141) at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2487) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2854) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:622) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:550) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1328) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getMultiSpecificProfileFromDB(ExtendedProfileStore.java:368) at oracle.apps.fnd.common.WebAppsContext.setProfileValues(WebAppsContext.java:4177) at oracle.apps.fnd.common.AppsContext.setDBEnv(AppsContext.java:3407) at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2508) at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976) at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827) at oracle.apps.fnd.common.AppsContext.(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ">

check your DBC file, we have discussed this issue in the forum, search for SERVERRESP_ENABLED_FLAG

Error while running a KPI Watchlist in obiee 11g dashboard

I am getting the following error while running a KPI Watchlist :
*" Odbc driver returned an error (SQLExecDirectW) "*
I added two KPI's (KPI 1 & KPI 2)into that Watchlist , one from the default "Sample Sales Lite" (sub 1) and another from sub 2 which have essbase as data source .
KPI 1 (created from sub 1) is working fine , but while placing KPI 2 (created from sub 2 ) in the watchlist , its throwing the above error . However , while running KPI 2 individually , its showing meaningful results .
Let me know if the problem statement is not clear .
OBIEE version used : 11.1.1.5.0 .

Could anyone reply this thread. I am also getting the same error . Even server logs are also not helping.

Error while running a customize report in oracle ebs

Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24

Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein

Running AdobeSerialization on KBOX/KACE K1000?

Similar Messages

Maybe you are looking for