Running an fcp studio project (5.0.4) on macbook pro software

I'm running a project on final cut pro studio 5.0.4 and would like to
screen footage on a laptop - preferably on a new macbook.
i'm wondering if i can run a project that's compatible with both versions of the software. i'd like to screen and select scenes on my laptop - and then bring the sequences back into my fcp studio project.
thanks

Both versions of what software? You mean FCP 5.0.4 and FCP 5.1?
While you can open and update a 5.0.4 project to 5.1, once you do that you cannot open that project in 5.0.4. At that point you need to export an XML of the sequence and import that XML into 5.0.4.
Shane

Similar Messages

My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced.

My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced. Is it internal battery for both, new logic board required, bad hard drive, or bad RAM?
Help.

Run an Apple Hardware Test using the original installation disk that has the AHT instructions on it.
Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
It is possible that you may need a new PRAM battery.
Ciao.

What is the latest Mac OS X that I can run on my 2.33 GHZ Core 2 Duo Macbook Pro?

My MBP was running the fan almost constantly and otherwise acting odd so I decided to just refresh the installation from scratch. At that time I was running Lion 10.7.5. Before rebuilding everything with that version I want to make sure running Lion on this machine isn't contributing to my issue.
What is the latest Mac OS X that I can run on my 2.33 GHZ Core 2 Duo Macbook Pro?
I have every OS release since the original purchase so I can rebuild on the one that's most stable on this laptop.

You can run Mt. Lion if you so wish:
http://www.apple.com/osx/specs/
If you want the most efficient OS, I would suggest Snow Leopard.
However I suggest doing some investigation prior to installing a new OS. First do a SMC reset:
http://support.apple.com/kb/ht3964
Also run an Apple Hardware Test. Use the #2 disk on your original install disk.
If there is no improvement, post back.
Ciao.

I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop

I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop CC.
Is there a list of the files and/or folders that contain Settings and Preferences which can be copied from the old system to the new?

with your cc apps you should try to use the sync feature. that's never worked consistently for me, but when it does work, it's helpful.
there are preference folders and presets and settings that you could copy but you're better off installing fresh because a common problem for people with adobe program issues is a settings issue.

Im running mac os x V10.5.8 on my macbook pro. Is there anyway i can update the operating system to os x lion?

im running mac os x V10.5.8 on my macbook pro. Is there anyway i can update the operating system to os x lion?

If it's a Core Duo Mac, no.
If it's a Core 2 Duo or better Mac, phone the online Apple Store and order a Mac OS X DVD, and if the computer can't run 10.8, a download code for 10.7.
(70266)

I killed my computer with coffee. It's out of waranty and applecare has run out. It's a 4 year old Macbook Pro. Any idea whether it makes sense to try and fix it?

I killed my computer with coffee. It's out of waranty and applecare has run out. It's a 4 year old Macbook Pro. Any idea whether it makes sense to try and fix it?

Nothing works at all. When I spilled the coffee I shut it down, unplugged everything, turned it over and put paper towels beneath it to drain. Made the mistake of turning it back on after a couple of hours. It worked but emitted strange noises from the internal speakers. Turned it back off, but have not been able to turn it back on since. I disassembled the entire macbook yesterday, found coffee stains on the keyboard components. Tried to turn it on and get nothing. The only sign of life is the battery indicator. When I press the button the series of green lights come on, but that's it. Thanks for your responses. Jaylloyd

HT3325 ive just purchased keynote remote on my iphone running os6, but it just wont connect to my macbook pro?

ive just purchased keynote remote on my iphone running os6, but it just wont connect to my macbook pro? Ive created a wireless network and the 2 are connected. However in keynote remote when i try and create a link nothing appears in keynote on my macbook pro??
help!!!

what version of Keynote on the Mac are you using?

FCP Studio 2 compatibility with Cineform, Adobe Premiere Pro & Canopus

Currently my post workflow is on FCP Studio 1, and I am considering upgrading to FCP Studio 2 on my Mac G5. But since I am also considering getting a Windows PC which has Cineform, Adobe Premiere Pro and Canopus EDIUS installed in it for offline editing and handling of variable frame rate footage shot on Varicam, I am concerned if I can transfer the editing timelime from the PC (edited on Cineform, Adobe Premiere Pro or Canopus EDIUS) over to the Mac's FCP Studio 2 to do color grading on it using the new Color? Will the file formats and codecs used in Cineform (Cineform RAW), Adobe Premiere Pro (AVI), and Canopus EDIUS (Canopus HQ) be compatible or recognised in FCP Studio 2?
Is FCP Studio 2 able to handle footage shot using SI's 2K camera? Can Color be used to grade the 2K footages shot on the camera?
Also, do I need to make any hardware (e.g. my capture card, etc) upgrade for the above to work?

Export back to tape, and capture that in FCP. Things should work swimmingly.
x

Exporting Avid project to iDVD on a Macbook Pro

First, let me say that I know this is a Final Ct forum.
But it's also a MacBook pro forum,
and I know that many FCP editors also edit on Avid (like me).
I hope someone here can help me.
I created a project on Avid Media Composer.
It was shot in 4:3 but I want to set it so that it
has the 16:9 HD look.
In the Avid, I am using these export settings:
I right click sequence, Export,
Select DV Stream ('m using this setting because
it's the only way i can get video that does not jitter when
there is movement or pans)
Then I click on Optiions button
then I get a new window
I select DV/DVCPro NtsC at the top
Finally
in "Display aspect ratio: I select :16:9
but I'm still getting a square 4:3 box within
the 16:9 screen. I have checked the aspect ratio settings on
both my tv and dvd player and they're both set to 16:9.
Can someone help me find the right settings that
will give me a 16:9 aspect ratio screen,
and clean sharp video without jitters in movement?
I will be very very grateful for any help!
Message was edited by: teresita
Message was edited by: teresita
Message was edited by: teresita

Hi burdman:
Are you using an external drive? if so, please be sure it is formatted correctly.
Connect the drive to your computer and turn on the drive. Open Disk Utility in your Utilities folder and do the following:
1. After DU loads select your hard drive from the left side list. Click on the Partition tab in the DU main window.
2. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
3. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
5. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
This will erase your drive, so make a back-up first.
Sue

Premiere Pro CS5 project sudenly extremely slow on Macbook Pro

Hello,
I've been using Adobe CS5 for a little over two years. I have a 2012 Macbook Pro.
I am working on a freelance project for a big client. In the last 48 hours or so the processing speed of the project has been getting slower and slower. The rest of my computer's processing is fine, it is only when I try to do anything in Premiere in this one specific project. It is now to the point where I can't really do anything in the project.... If I try to make an edit (for example, trimming a clip, adding a cross dissolve, changing the scale of a clip, etc.), what should take less than 1 second to process can take anywhere from 30 seconds to a few minutes. This is obviously highly abnormal.
I can't figure out why it is doing this. I have some pretty big files in the project, but I doubt it making it slow down this much.
Help anyone??

2.2GHz Intel Core i7 processor
16gb RAM (upgraded from 8gb)
Intel HD Graphics - AMD Radeon HD 6750M 512 MB
It wasn't exactly going smooth on the 2011 one, but it wasn't nearly as bad as the one I have now.
I don't know if this is relevant, but video games run much better on the new one.
Also I cant select GPU under ray-tracing in the AE preferences > Previews > GPU Information. It says 'GPU not available - incompatible device or CUDA driver'. I've installed the CUDA driver, but I suppose it's worthless since I don't have an NVidia graphics card?
I don't know too much about hardware, but I hope it helps

Why is Mavericks running so slowly after a fresh install on my Macbook Pro?

I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
          MacBook Pro (13-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.3 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
          Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 319.21 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898 disk2 : (8.09 GB)
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. iPhone
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
          [System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
          [System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
          [System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
          [not loaded] com.spotify.webhelper.plist 3rd-Party support link
          [not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
          iTunesHelper
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Java 3rd-Party support link
          Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Epson Printer Utility 4:          Version: 9.17 - SDK 10.5 3rd-Party support link
                    /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Smultron:          Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    Time Machine Backups [Local] (Last used)
                    Total size: 412.18 GB
                    Total number of backups: 4
                    Oldest backup: 2014-01-07 12:40:04 +0000
                    Last backup: 2014-01-20 17:50:35 +0000
                    Size of backup disk: Excellent
                              Backup size 412.18 GB > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              17%          Mail
               8%          mtmd
               5%          mds_stores
               3%          mds
               2%          iTunes
Top Processes by Memory:
          217 MB          Mail
          184 MB          com.apple.WebKit.WebContent
          139 MB          softwareupdated
          115 MB          mds_stores
          106 MB          Google Chrome
Virtual Memory Information:
          186 MB          Free RAM
          1.21 GB          Active RAM
          983 MB          Inactive RAM
          1.07 GB          Wired RAM
          7.85 GB          Page-ins
          326 MB          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I've used a Hitachi multimedia projector with my previous MacBook with Snow Leopard but I can't get it to project data from my new MacBook Pro. Any suggestions?

My new MacBook Pro with 10.8.4 does not seem to work with my Hitachi multimedia projector which works find with my older MacBook running 10.6.8. Is there anything I can do to get the projector to recognize my Mac or is it the other way around? (It would be nice to just carry one machine instead of two. Besides it's not a good advertisement for the new MacBook Pro!

Are you using the same cable and input connector with both systems?
Are you using the same (or corresponding) settings on both systems?

Can I run OS 10.6.4 on my brand new MacBook Pro?

I am a professional photographer and one of the programs I need in order to do my job is some software from Nikon that apparently will not run on Lion, OS 10.7.3. Documentation says that it can run on OS 10.6.4, Snow Leopard.
Can I run OS 10.6, Snow Leopard on my brand new MacBook Pro, 2.8Ghz, Intel Core i7 machine?

You cannot install any of them. As I said earlier your only options are 10.6.6 through 10.6.8 none of which are on a retail DVD.
If you have access to a Mac that runs 10.6.4, then you can put a small system on a 16 GB USB flash drive, boot from it then upgrade the system to 10.6.8. Now, see if you can boot your new computer with it. If so, then create a small partition on your new computer's hard drive large enough for the Snow Leopard system and whatever applications you need to use. Clone the USB flash drive to this partition using the Restore option of Disk Utility:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new partion on the internal drive. Source means the USB flash drive.

Newly installed logic studio won't launch on my macbook pro

I just installed Logic Studio on my macbook pro (core 2) and it crashes before it can launch all the way. could this be a conflict with my protools LE software, or Reason? any ideas? thanks.

Have you downloaded the .01 update for LP8? That should improve things a fair bit. Don't know about the MBox2; might want to their website on that one.
Cheers

Need Help Installing Final Cut Studio Version 2.0.1 on Macbook Pro

I am trying to install an old version of Final Cut Studio (Final Cut Studio Version 2.0.1) on my macbook pro (OS X Mountain Lion). When I tried to install it, it said, "power pc applications not supported on this computer". I was told to "uninstall" OS X on my computer, install Final Cut Studio, and reinstall OS X Mountain Lion again. Is this true? If so, how do I do this?

There is a "bug" in the installer application of Final Cut Studio Pro 2 that will fail to work in Lion or Mt. Lion; it will work successfully in Snow Leopard and a subsequent upgrade to Lion or Mt. Lion after the successful installation of FCSP2 will continue to work.
Once Mt. Lion is installed you can use one of these two methods to install FCSP2:
1) Pacifist
2) Jeremy Johnstone's Terminal method:
http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html

Running an fcp studio project (5.0.4) on macbook pro software

Similar Messages

Maybe you are looking for