Running an iMac 24" with Lion Facetime will connect with another iMac using SL I can both see and hear the other person. They can see me but can't hear me. I have set the sound panel to what I think is correct. Any ideas?

I am running an iMac 24" with Lion. FaceTime is received with both sound and picture. Another iMac running SL can see but cannot hear me. Any ideas?

if you use some case or screen protector check up on where the mics on the iphone are and that your case / screenprotector and or fingers are not blocking them

Similar Messages

I can send a imessage but the other person won't receive it, i can recieve theirs though. It shows messaged delivered

I can send a IMessage but the other person won't receive it, i can receive theirs though. It shows message delievered

Try running a power cycle = hold the power button till the phone shuts off then re-powers and you might try running system cache clear it's not like a Factory Reset but it can sometimes straighten out phone issues.. If the issue persist you might removing the Sim Card do it with phone off use care when removing leave it out for 10min. then reinstall..
Give these suggestions a try let us know if it Helped. b

Updated to PS 2014 for the CC updater in the top menu bar on the Mac, or so I thought but even after restarting I still have older version, despite "about" saying there are no updates. Any ideas?

In the Mac, the updater icon told me there were many updates. I had them all install and they did, supposedly successfully. However, after I opened PS, it's still the old version and if I go to Help and click updates, it says I have the lastest version, yet it's still 14.2 What's going on? Thanks.

This may help ...
I had the CC Desktop App tell me there were new versions available and got both Indesign (CC 2014) and Photoshop (CC 2014). Went to start Indesign and got an error: 1. Suggesting I uninstall and then reinstall. The uninstaller in the app folder had lost its alias link to the original uninstall file so I had to manually find it and un-install. Then re-did installation using the CC Desktop app, and now its starting. So I am doing the same with Photoshop now and have tried starting Indesign and it is now working ... So Id suggest check your application folder and look for a folder "Adobe Photoshop CC 2014" and if its not there then you may well have just updated the existing CC application. The 2014 is a totally new install ...
Regards
Mitch

When I use FaceTime I can't hear the other person unless I mute myself but they can hear me just fine.

I can't hear my girlfriend when she talk on FaceTime unless I mute my own mic while she talks. She can still hear when I talk but I can't hear her.

Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
Relaunch the App and try again.
Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

I have a verizon mifi 2200 modem and wonder if an ipad with retina display will connect to it

I have a verizon mifi 2200 modem and wonder if an ipad with retina display will connect with it to use the internet

It should work. Have you tried and it doesn't work?
FYI
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT3577 I have an iPhone 4S and I have set the VoiceOver to off, but when I run with iTunes on, it still comes on. How do I stop this from happening?

I have an iPhone 4S and I have set the VoiceOver to off, but when I run with iTunes on, it still comes on. How do I stop this from happening?

This is from article on device with multiple computers:
iPod shuffle and iPhone are intended for use with a single computer. You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
http://support.apple.com/kb/HT1202

I have been trying to download photos. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?

I have been trying to download photos too my MAC. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?

Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

Is your iPhone connected to your computer using the lightning cable or are you doing WiFi sync?
Sometimes the iPhone doesn't show up in the side bar if you're using WiFi syncing, if its not working, then be connected to your WiFi on your phone and on your computer (Same network) let me know how it's going, if it doesn't work still. Turn your phone off and on again and put in your pass code then try to sync it (keep your phone unlocked and not in sleep mode) tel me if it appears in the side bar.

Cannot boot into mountain lion after I have set the start volume to CD drive

Previously I need to boot from CD so I have set the start volume to CD drive by pressing command+option+P+R at the same time and change the start up volume to CD drive.
But right now, it can just start from CD but cannot boot into Mac OS (Mountain Lion) which is installed in the hard disk.
I have tried to press command+option+P+R at teh same time during bootup but seems like right now it doesn't recognize this command. I have tried pressing "X" or "option" or spacebar, etc during bootup but still it tries to boot from CD.
Anyway I can change the start volume back to my internal hard disk?
I have even disassembled my iMac and the CD drive to remove the previous CD as well. Then it still tries to boot from CD drive but now saying the device is not bootable and ask me to insert a bootup disk. I then tried to put the Mountain lion installation DVD (I previously created the installation DVD by following the DIY way from this link http://www.cultofmac.com/180925/how-to-make-a-bootable-disk-or-usb-drive-of-os-x -mountain-lion/) there in the drive but it still said the device is not bootable.
I have disassembled my iMac again to remove the mountain lion disk right now. So the CD drive is now empty. Anyway I can change the start volume back to my internal hard disk?
This is really frustrating .. Hope someone can help.
thanks!

Have you ejected the CD/DVD by holding mouse button on bootup?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

I can't hear the other person while facetiming on the Imac

I cant hear the other person while face timing on my imac but they can hear me

HI,
There have been similar issues with iChat and I will use that as an example first.
In iChat the Mic needs to be On (in the Video menu).
It also needs to be listed in iChat Menu > Preferences > Video section > Microphone Drop down and this needs to match ther Mic set up in System Preferences > Sound > Input.
In addition to this the Mic needs to be "turned up" high enough in the System Preferences to work with the app.
So If you Buddy cannot hear you it is your Problem when it comes to iChat.
If you cannot hear the Buddy it is much more likely that they have not set up the Mic in System Preferences or have the Mic Off in iChat.
Moving to FaceTime you will find a Mic Setting in the Video menu (if you have two or more Mics).
If you do then the System Preferences > Sound > Input and the volume setting there needs to match the choice in the App.
As it is your contact that you cannot hear you need to get them to check their settings first.
As for your end, it will be worthwhile doing a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
9:06 PM Thursday; June 27, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT2515 What happens if our video chat is not connecting with the other person?

What happens if our video chat is not connecting with the other person?

Hi,
Not really enough info to help constructively.
Which Version of iChat ?
Is it iChat to iChat or iChat to Messages (i.e Mac to Mac) or AIM (iChat) to PC AIM (needs to be a compatible version)
Is this AIM to AIM (Includes AIM valid Screen Names from certain Apple IDs) ?
Is it Jabber to Jabber (this can only be done Mac to Mac in Messages and/or iChat) ?
Do you get any failure message ?
In the Video Menu > Connection Doctor > Errors tab do you get any info ?
NOTES
As mentioned it is iChat to iChat or iChat to AIM on a PC if the PC has a compatible version (which is not the latest) (where it lists iChat it also means Messages in Mountain Lion)
It has to be either AIM to AIM IDs or Jabber to Jabber IDs
It cannot be Jabber to some GoogleTalk Web Browser Login (or Facebook)
It cannot be Jabber/Google Talk to the PC app called GoogleTalk
Google released an PC only App that will use Jabber protocols for Video (Called Jingle)
Their web Browser Plug-in also uses Jingle for Video and Audio chat but iChat and Messages use SIP (Session Initiation Protocol) to connect. The two are not compatible.
Facebook also run a Jabber server and have apparently released their Own Plug-in which can cause problems of it's own on a Mac.
However you also cannot video to a Web Browser Login on Mac or PC
If this is iChat 6 it does not Video on the Yahoo Accounts (that is Text Only)
This means it cannot Video to any version of Yahoo on Mac or PC or any Web Browser method.
10:27 PM Tuesday; February 19, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT204150 I have a Mac 10.5.8 op system. My Contacts do not syn with I cloud. Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book. How do I efficiently merge the duplictes that are now on I clo

I have a Mac 10.5.8 op system. My Contacts do not syn with I cloud. Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book. How do I efficiently merge the duplictes that are now on I cloud?

You cannot use iCloud with Leopard 10.5.8. The minimum requirement is Lion 10.7.2. If you have been syncing your contacts with iCloud you can only have been doing it by some sort of unsupported hack, and if it doesn't work it's unlikely to be possible to find an explanation. If you have been using other (compliant) devices by trying to sync using both iTunes and iCloud you are likely to get duplicates.
A computer old enough running Leopard may well not be upgradeable to Lion or Mountain Lion, but if you can do so this is the only way you are going to be able to make proper use of iCloud.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Last night I was Skyping and the other person said that I sounded like a robot. Whats wrong?

Last night I was Skyping and the other person said that I sounded like a robot. Whats wrong?

I have no idea as I don't have Skype.
Have you tried Skype's Help Pages ?
9:31 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

Running an iMac 24" with Lion Facetime will connect with another iMac using SL I can both see and hear the other person. They can see me but can't hear me. I have set the sound panel to what I think is correct. Any ideas?

Similar Messages

Maybe you are looking for