Running an Update form in Query mode from the MENU

Could any one explain how to run the same Form from the same Menu with two different options, One in QUERY ONLY MODE and one in Update mode. We are using Designer 6i and Headstart 6.5.
Thanks
David Short

Is webutil supported in 9iAS? I think it is supported only in 10gAS.
Thanks,
Sujoy

Similar Messages

  • Developering ADF form in query mode (Oracle forms simulation)

    Hi,
    we have a requirement for developing the existing Oracle form using Oracle ADF. The existing Oracle form displays the form in query mode by default. We can enter the search criteria in any of the text fields and then execute query to get the results. If the user does not enter any search criteria, then the form loads specific record based on default criteria into the form. Could you please help developing similar form using ADF.
    At present I created the view object with one bind variable and dragged the view as ADF form to the jspx page. Then I am launching the form in query mode (executing the find method on the view object using operation binding at the time of loading the page). After entering the query criteria in the form, If I click on a button I am executing a method in the managed bean. In the managed bean I am executing the "Execute" operation on the view and it is working fine.
    But my problem is if the user does not enter the search criteria I have to pass default parameters to the view object and return the default record in the form.
    Can you please help in resolving the issue.
    Thanks and Regards,
    S R Prasad

    Hi Frank,
    Thank you for providing information. I created the query panel with the table by dragging all the named criteria. But this is not the look we are expecting for this form. As we have to deveop ADF form with the same behavior as oracle forms, the user must be in a position to edit the data in the same field as that of query field.
    As an example, we have to design a form for Dept table. We have to display all the columns of the dept view in the form at the time of launching the form in query mode. Once the user enters any search criteria in the form, we have to perform search and display the record(s) matching the query criteria in the same columns displayed in the form. User should not see any changes in the form layout.
    If the user does not enter any data in the form, then we have to display the record(s) in the form with the specific department id(This department id can be calculated based on the data in another table).
    Can you please help us in resolving the issue.
    Thanks and Regards,
    S R Prasad

  • How to put the form in Query mode

    Hello
    Please let me know how to put the form or block in Query mode , so that when i run the form it should be in Query mode . I have seen properties of SET_FORM_PROPERTY and SET_BLOCK_PROPERTY but cannot find one
    Thanks

    QUERY mode? Did you mean, that you can only QUERY without changing data.
    This is the QUERY-ONLY-mode, which can be started e.g. call_form
    this is the help for that topic:
    PROCEDURE CALL_FORM
    (formmodule_name VARCHAR2,
    display NUMBER,
    switch_menu NUMBER,
    query_mode NUMBER,
    data_mode NUMBER,
    paramlist_name VARCHAR2);
    query_mode     
    NO_QUERY_ONLY (The default.) Form Builder will run the indicated form in normal mode, allowing the end user to perform inserts, updates, and deletes from within the called form.
    QUERY_ONLY Form Builder will run the indicated form in query-only mode, allowing the end user to query, but not to insert, update, or delete records.

  • Put a form in QUERY mode

    Hi,
    how to put a form in QUERY mode ?
    Many thanks.

    It is F11, type your query, then Ctrl + F11
    Or, click on View > Query By Example > Enter, enter your query, then click on View > Query By Example > Run
    Get all shortcuts from Help > Keyboard Help

  • Calling a form in query mode

    Hi,
    I have a form "Ledger" in which i have a detail block with the following fields
    1. Voucher no.
    2. Date
    3. Account Code
    4. Posted
    and also i have a form master detail for vouchers entry...and it has three buttons for ENTER QUERY, EXECUTE QUERY AND EXIT QUERY and also ADD, EDIT & DELETE button as well where user query, add, edit and delete vouchers from there. Plus it has a voucher no. field.
    I want user to double click on any of the records in ledger form's DETAIL BLOCK and on double click i want to call "Voucher Entry" form in enter query mode and the voucher no value from ledger form should be copied from there and automatically fill in "Voucher entry" (newly called) form and execute query from there..
    How to do that...plz tell me
    Thanks

    Hi, sorry for my English!
    So, at block level (detail block) add trigger WHEN-MOUSE-DOUBLECLICK.
    Add the call_form built-in (view form builder help for syntax).
    In the "When-new-for-instance" on called form call the built-in "enter_query".
    For the item "Voucher entry" there are two way:
    the first one is to create a global variable(on the primary form) and then use it in the second form before the enter_query;
    the socnd one is to call form whit parameter list (see the help for the built-in call_form).
    Attilio

  • Open form in query mode

    I want to be able to open a form in query mode - is there any way to set this?
    I am using Designer and Headstart.
    Thanks

    Hi Cathy,
    You can do this. See the help topic: About the startup query mode of generated forms.
    Rgds
    Susan
    Oracle Designer Product Management

  • How do I get and pass Master-Detail rowid to another form in query mode?

    I am trying to get the rowid of my master record passed to
    another form in query mode. This is necessary because, I need to
    have a way to show other detail tables for my master record. I
    have been successful in calling the other forms, but only if I
    hard code the rowid(or Primary Key).
    Ultimately a "Tabbed" HTML table for each supporting detail
    table that I have would be perfect. Any help would be greatly
    appreciated. Thanks.

    correct me if I am wrong, is this a 9iAS (Application Server)
    related question? This forum is for 9iAS only.
    Regards,
    --Tao

  • While Creating New Insert Form Existing Data Display from the Table

    Hi
    I am New To Sun Java Studio Creator and New to Java Also While Creating New Insert Form Existing Data Display from the Table while i am Run the Form. Can any one help me to Solve this one

    Dear Giri,
    As per your Advise, Literally I have Search the Properties for the Components to set value Null, but I am Unable to find the Value in Properties palate. I have tried in various options like
    In the Properties Palate
    TextField1_onselect use Value null
    TextField1_text I have selected use Value option and I have manually Keyed-in null;
    In the JSP Page, I have manually keyed in the null value below said
    <ui:textField binding="#{BI.textField2}" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
    <ui:textField binding="#{BI.textField2.Value = null }" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
    At last I am Failure. I am ignorant of it. Can you please help me on this where I have to set null value for the components? I will be very kind of you

  • Starting Firefox in Private mode from the pinned ico in taskbar causes Windows Explorer to crash.

    Starting Firefox in Private mode from the pinned icon in taskbar (right click, choose "New Private Window") causes Windows Explorer to crash almost everytime, but not always. Very odd.
    Didn´t happen with previous versions of Firefox.
    Firefox 22.0, Win 7 Ultimate with all updates applied.

    Hello Paul,
    That's a very odd behavior indeed. All I can think of is that an add-on is confused and makes Firefox crash. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • SAP office Express info-the UPDATE is terminated as received from the user"

    Hi Sap Gurus,
    I am facing a problem which I failed to find out why.
    The case is in Network Activity I have attached components of Type "N" type i.e, non stock item.I tried to run MRP but with no effect.
    Now the problem is whenever I am trying to attach further components of "N" type & save it ; s message is coming thru {{ SAP office Express info }} stating that {{Express document " the UPDATE is terminated as received from the user" X ".
    Where from this message is getting generated & that to only for " n " type component.
    How to eleminate this error.
    2. Same problem is coming at the time of creation of user defined Characteristics.
    This has become very urgent otherwise I could not proceed further.
    Pl. Help.
    I am attaching the screen shot of the problem .
    Regards,
    A. Bose.

    Hi,
    Please use the T.code SM13 where there was an error and  click on the Repeat update icon
    Check the Error.
    Also check T. Code: ST22.
    Is the number range assigned to the Purchasing documents in OMH7, or are they exhausted. check if any workflow or user exit is active.
    hope it helps.
    thanks,
    Reward points if found useful.

  • TS4209 Is there a way to make certain that I have this update? I run software update, and nothing is available, yet the problem persists.

    Is there a way to make certain that I have this update? I run software update, and nothing is available, yet the problem persists.

    I added this post in response to this parent post: http://support.apple.com/kb/TS4209?viewlocale=en_US&locale=en_US
    The parent posts mentions the solution to my problem is the update available when you run software update. However my system is up to date, and I still have the problem.
    Further information:
    When I return home from work, and wake my computer, the Wi-Fi indicator shows that it is trying to connect. It fails, and the signal bars show zero connectivity. If I click on the Wi-Fi indicator, the computer then searches for nearby networks, and I am able to select mine. Then it connects.
    It seems very clear that the problem is my iMac tries to connect before looking for networks.

  • How to get the query values from the url in a servlet and pass them to jsp

    ok..this is the situation...
    all applications are routed through a login page...
    so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
    so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

    ok..this is the situation...Sounds like you have a bad design on your hands.
    You're going to send passwords in a GET request as clear text? Nice security there.
    Why not start with basic security and work your way up?
    %

  • I just connected my Mac Mini running OS 10.6.8 to a IG 32' monitor. What resolution should I select from the menu?

    I just connected my wife's Mac Mini running OS 10.6.8 to an IG 32' monitor. What resolution should I select from the menu in order to provide maximum screen appearance? My wife has AMD and a visual acuity of 20/400 with central scotonata.

    In System Preferences:Displays you have an option to show
    Displays Prefs in the title bar above the screen - where she can
    iteratively adjust to her liking. Higher screen resolutions, ironically,
    result in smaller characters so adjust to suit. Below, Displays is
    4th from L.
    All best, Tom

  • TS1702 I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

    I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • Call a Form using Webutil from the Menu loose focus on the applet

    Hello,
    I have the following problem:
    When calling a form using webutil from the menu the focus on the applet (I mean the Forms Application window) is lost and I have to click on the window to get back the focus on the application.
    Any advice ?
    Env: Forms 9i / Webutil 1.06
    Rgds,
    Philippe

    Try to use the NO_HIDE parameter in the CALL_FORM() built-in.
    Call_Form( 'the_form', NO_HIDE ) ;Or maybe, in the[b] When-New-Form-Instance trigger of the called form, return the focus to the calling form
    Go_Form( Get_Application_Property( CALLING_FORM ) ) ;Francois

Maybe you are looking for