Running Aperture 2.1.3 and it quits each time I just try to start up

not a protection error = it's done this 4 times in a row = am running MacPro, OSX 10.5.7, plenty of RAM and the Library I'm trying to open is 88G [only]
I have tried to start up 4 times and it quit each time...I have reported each to Apple but wondered if there is an answer from you folks??? Thanks.

False alarm = I had to reinstall Leopard and did an Archive and Install and apparently [oddly] Aperture was one of the programs [only one so far] which 'broke' = I redownloaded it and reinstalled it. Seems okay now...Sorry!!!!

Similar Messages

  • I am running aperture 2.1.4 and am considering purchasing the latest version. will my photos, projects, and folders etc. transfer over automatically ?

    I am running aperture 2.1.4 and am considering purchasing the latest version. will my photos, projects, and folders etc. transfer over automatically ?

    will my photos, projects, and folders etc. transfer over automatically ?
    Nearly automatically.
    This will be a major upgrade, and Aperture will have to upgrade your library.
    As a precaution, make sure you have a working backup of your library, and I'd keep a copy of the Aperture 2.1.4 Application installer as well.
    Also it is recommended to repair the permissions and to rebuild the library, to make sure that  the library has no corruptions before you upgrade.
    Rename the Aperture Library to a name different from the default name before you upgrade.
    Launch the new Aperture version by double clicking your Aperture library. Aperture will prompt you, that it is necessary to upgrade the library; let it run, this may take a while. And yes, you should find all your photos, projects, folders, etc. after the upgrade just as you imported and organized them.
    Regards
    Léonie

  • I am running Aperture 3.1.2, and trying to install the updates (3.1.3, 3.2.2, 3.2.3), but after opening the .dmg image, installer says I need to have Aperture 3 installed, which I have. Any help would be appreciated.

    I am running Aperture 3.1.2 and trying to install updates, but the installer cannot "see" my application and won't proceed with the installation.

    Read another entry and solved the problem. I had changed the application's title to read Aperture3, instead of its orignal descriptor "Aperture." Sorry to have used the space, but thanks for the help.

  • HELP!! My Apple "MAIL" app. unexpectedly quits each time I open it.

    My Apple "MAIL" app. unexpectedly quits each time I open it.
    It will begin to load my mail, show the mailboxes and new e-mails and then all of a sudden quit.
    I searched some of the Apple support and forums and have tried these things:
    1. I trashed the "com.apple.mail.plist" preference file in the pref. folder.
    2. I did an archieve install with Tiger OSX on my entire System Folder.
    3. I erased my user>library>"mail folder"
    4. I tried holding the shift key upon opening the program as suggested here but to no avail: http://discussions.apple.com/thread.jspa?threadID=479497&tstart=0
    This has not resolved the problem. The program still quits every time I open it.
    Pleeeeease help!!!!!!!!! DO YOU THINK I HAVE A VIRUS???
    Here is my crash data:
    Date/Time: 2006-06-06 15:15:59.264 -0700
    OS Version: 10.4 (Build 8A428)
    Report Version: 3
    Command: Mail
    Path: /Users/netgear/Desktop/Mail.app/Contents/MacOS/Mail
    Parent: WindowServer [86]
    Version: 2.0 (727)
    Build Version: 1
    Project Name: MailViewer
    Source Version: 7270000
    PID: 386
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000006
    Thread 0 Crashed:
    0 ...apple.AddressBook.framework 0x932d598c c4_HandlerSeq::ColumnType(int) const + 32
    1 ...apple.AddressBook.framework 0x932d5950 c4_HandlerSeq::IsNested(int) const + 16
    2 ...apple.AddressBook.framework 0x932d4fe8 c4HandlerSeq::Restructure(c4Field&, bool) + 56
    3 ...apple.AddressBook.framework 0x932d52a8 c4HandlerSeq::Restructure(c4Field&, bool) + 760
    4 ...apple.AddressBook.framework 0x933bb6e8 c4_Storage::SetStructure(char const*) + 244
    5 ...apple.AddressBook.framework 0x932d7eec c4_Storage::GetAs(char const*) + 932
    6 ...apple.AddressBook.framework 0x932d8e14 cacheViews + 240
    7 ...apple.AddressBook.framework 0x932d319c -[ABAddressBook nts_OpenContactManagerWithMode:cacheSchema:] + 452
    8 ...apple.AddressBook.framework 0x932d1cf8 -[ABAddressBook nts_InitDefaultContactManager] + 1052
    9 ...apple.AddressBook.framework 0x932d1834 +[ABAddressBook nts_SharedAddressBook] + 76
    10 ...apple.AddressBook.framework 0x932d1768 +[ABAddressBook nts_CreateSharedAddressBook] + 76
    11 ...apple.AddressBook.framework 0x932d168c +[ABAddressBook sharedAddressBook] + 80
    12 com.apple.MessageFramework 0x9aa26a60 +[Account myFullName] + 52
    13 com.apple.mail 0x0012172c 0x1000 + 1181484
    14 com.apple.mail 0x000e6768 0x1000 + 939880
    15 com.apple.Foundation 0x90b05d18 __NSFireDelayedPerform + 304
    16 com.apple.CoreFoundation 0x902b6f90 __CFRunLoopDoTimer + 184
    17 com.apple.CoreFoundation 0x902a3908 __CFRunLoopRun + 1680
    18 com.apple.CoreFoundation 0x902a2ebc CFRunLoopRunSpecific + 268
    19 com.apple.HIToolbox 0x91fd4fc0 RunCurrentEventLoopInMode + 264
    20 com.apple.HIToolbox 0x91fd45cc ReceiveNextEventCommon + 244
    21 com.apple.HIToolbox 0x91fd44c0 BlockUntilNextEventMatchingListInMode + 96
    22 com.apple.AppKit 0x924bd384 _DPSNextEvent + 384
    23 com.apple.AppKit 0x924bd048 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
    24 com.apple.AppKit 0x924b95ac -[NSApplication run] + 472
    25 com.apple.AppKit 0x925a9e04 NSApplicationMain + 452
    26 com.apple.mail 0x0000328c 0x1000 + 8844
    27 com.apple.mail 0x000a5bac 0x1000 + 674732

    A few of the messages I deleted (the last 2 days) now say
    "You need to take this account online in order to download it."
    If this is the result of having deleted the *.emlx files manually, you're probably seeing this error message because there is still a reference to them in Envelope Index.
    Is there anyway to tell Mail to re-download these
    mail files and reconnect them?
    If they're still on the server, yes. Choose Get Info (⌘I) from the Action menu located below the mailboxes list in the main Mail window to open the Account Info window -- type "Account Info" in the search field of Mail Help for more information on this feature. Now, choose the account that has the problem from the Account popup menu at the top of the window. Does Mail display there the messages that are missing? What type of account is this (POP, IMAP, .Mac)?

  • HT204161 I was watching a movie on my Apple TV and suddenly it stopped. I noticed I was logged out. Then I tried logging in again and I keep getting a message "cannot connect to iTunes". I restarted the Apple TV three times and tried again each time. I am

    I was watching a movie on my Apple TV and suddenly it stopped. I noticed I was logged out. Then I tried logging in again and I keep getting a message "cannot connect to iTunes". I restarted the Apple TV three times and tried again each time. I am stuck  Help please

    There's an issue currently that a lot of us are experiencing in that we all get the error message "iTunes is currently unavailable; please try later"
    It's an issue with Apple and we're awaiting an update re this
    I've posted a topic in regards to this after having a long conversation with Apple support this morning and will be receiving a call from their tech team tomorrow to run through it further
    As it stands iTunes cannot be accessed via ATV's and nor can it be streamed via AirPlay from iTunes to the ATV
    However I can access all films/iCloud content via my Mac Mini with no issues!

  • There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

    # Question
    there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
    ..

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Getting beach ball with mail 5.3, must force quite each time.  Any ideas?

    getting beach ball with mail 5.3, must force quite each time.  Any ideas?

    Hello pjdsmith,
    Thank you for using Apple Support Communities. 
    Here is a good article for troubleshooting email issues. Because there are a number of things that might be causing it, this article is good because it covers a number of possibilities. 
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    Regards,
    Jeff D. 

  • TS2755 Hi, I have been unable to activate my message and FaceTime. Each time I try, I get an error message saying my username or password is incorrect. But that is the same apple id I use in the App Store, and for my iCloud. What could be wrong?

    Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

    Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

  • Update to the new release and firefox hangs and becomes unresponsive each time I try to open it. I have tried removing firefox from my pc, restarted my pc. went to Google Chrome and downloaded it again. Still hanging. Please help

    Update to the new release and firefox hangs and becomes unresponsive each time I try to open it. I have tried removing firefox from my pc, restarted my pc. went to Google Chrome and downloaded it again. Still hanging. Please help
    I can open Google Chrome and IE without any problems. My new version of Thunderbird won't let me see messages.

    So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
    Could you walk us through what happened when you tried to do the download, please?

  • When I try to manually backup my ipad2, I receive an error message stating "There was a problem completing the backup.  Please try again later" ... and this happens each time I try to back up.  Grateful for suggestions ...

    When I try to manually backup my ipad2, I receive an error message stating "There was a problem completing the backup.  Please try again later" ... and this happens each time I try to back up.  Grateful for suggestions ...

    Seems to be a common enough problem. I've deleted the partial failed backup from iCloud, restoring all 5Gb of storage. Then started a manual backup. After about 20 minutes I get the same error message. I have repeated this several times. According to my iTunes on my laptop I managed one backup to iCloud from there but it is pointless if u can neither backup to or restore from iCloud via my iPhone 4. I had hoped ios 5.0.1 would solve this glitch but ....
    So much for "it just works".
    I have yet to see any suggested fix that works for me. Any other suggestions?

  • HT4059 Why am I asked for my password each time I open iBook?  Started a week or two ago. 4th gen iPad with iOS 6.1.3. And iBooks 3.1.

    Why am I asked for my password each time I open iBook?  Started a week or two ago. 4th gen iPad with iOS 6.1.3. And iBooks 3.1.

    Take it back to Best Buy and talk to the store manager. Possibly they can work something out with Apple.
    In the meantime, try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • I burnt CDs thru Finder and IPhoto. Each time the titles failed to transfer. Why?

    I burnt CDs thru Finder and IPhoto. Each time the titles failed to transfer. Why?

    Where are you looking for the Titles? You're not confusing titles - which are an entry in the Exif metadata of the file - with Filename?
    Regards
    TD

  • I can't send mail after updating to mavericks (10.9.2) . i have to quit and restart mail each time i want to send an email - i can't believe apple have done this so amateurishly - please can someone help ???

    i cant use mail to send an email. it goes to my out box and then eventually comes up with this dialogue :
    "An error occurred while sending this message using the SMTP server “(null)”
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent."
    I have to click Try Later and then quit mail , then restart Mail and then if I am lucky the email will be sent. the next time I have to send an email the same thing happens . I have to click Try Later and then quit mail , then restart Mail and then if I am lucky the email will be sent. I have to go through this everytime i want to send an email. its a really time consuming vicious circle which is extremely annoying,
    can someone help please ???????

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

  • One Exchang 2013 user gets "The Microsoft Administrator has made a change that requires you to quit and restart Outlook" each time his desktop is rebooted.

    I recently migrated all of my users from Exchange 2007 to 2013. One Outlook user gets this prompt each time he opens Outlook after rebooting his desktop. He gets it after every reboot.
    I tried re-creating his Outlook profile and that did not resolve the issue. I also tried to create an Outlook profile for him on a different desktop and got the same message.

    any help from:
    http://social.technet.microsoft.com/Forums/exchange/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How do I remove "first run" window after having opened and used FF many times?

    When I open FF, 2 tabs are presented, the first is the "first run" window the other is my homepage. I would like to delete or remove the first run page

    See these articles for some suggestions:
    * [[Firefox has just updated tab shows each time you start Firefox]]
    * [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

Maybe you are looking for