Running APEX 2.2.1 and 3.x through the same web server

Here is the scenario: Three database servers - one with APEX 2.2.1 and the other two with 3.2.1 (new installations) and the web server has the old images directory (for 2.2.1).
For a few reasons (production apps) I cannot upgrade 2.2.1 to v3 right now but need to get the new APEX installs working. I looked for a discussion on a second HTTP Server install but didn't see it - and reading through the install documentation I didn't see how this might be done.
Anyone done this?
Thanks,
Steve

Hi Steve,
You can setup different DADs for each of your environments and also setup different Location directives for each of the different locations for the files (javascript/css etc), for example /i/212, /i/312 etc (or whatever you want to name them). Then in your applications specify the correct images directory so that it points to the right location.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Similar Messages

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Multiple domains and multiple IPs in the same MacMini Server

I am sure that this topic has been faced already but I cannot find enough information to really dig into a solution.
I have a macmini server with two IPs let say x.x.x.12 and x.x.x.13 .
The server is set up on the first IP. It has his primary zone, machine record, mail aslias and www alias.
Lets call the server domain server.domain1.com
Everything works fine I have a couple of local users and a couple of LDAP users. Just to test the machine setup.
I can send and receive emails using any of the users as [email protected]
Now I would like to have another domain, domain2.com in the same server .
The final goal is to have users under different domains. They have their own email box, calendar, etc.
It will be preferable that I can share the same username with different domains. But I can live without that option.
My first test was to have the second domain called server.domain2.com using the second IP. x.x.x.13 .
For that I created another Primary Zone with domain2.com as machine record of x.x.x.13 . To use the second IP I simply create another Ethernet interface on the macmini.
In the Mail -> Advance settings I added the host aliases as well as virtual hosting domains for domains2.com.
With this setting I can send emails as [email protected] or [email protected] but when I replay to their messages I get a "Relay access denied" error from server.domain1.com .
I also tryed another domain pointing to x.x.x.12, the same as server.domain1.com . I did not create any extra Primary Zone but the local host aliases and the virtual hosting domains.
Same issue. I can send but I get a "Relay access " error.
As you might notice I am a novice on servers settings. I just try to recreate a similar environment common to Virtual Hosting providers for my own website playground but I cannot cut through this email configuration obstacle.
Any significant meaning that can be leading me to learn how to do it will be very very appreciated . (beside lynda,com tutorials that I followed already but do not mention multiple domains for mails).
Thanks

the problem I try to solve is to manage multiple domains in one MacMini Server.
Having two IPs is secondary.
I would like that each domains has his own users with emails, iCals, Wiki and web sites.
The main problem is having emails to work for any additional domain beside the default one on the machine IP.
I also got an additional IP address to be used on the same server hoping that it make things easier but apparently is making things more difficult.

SCCM central site and primary site use the same SQL SERVER with two Instance.

Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

Although you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

Why the jsp tag jsp:forward page="page.jsp" / works when i work with web server iPlanet in a Solaris machine and doesn't work with the same web server, in a Windows 2000 machine ?

The request parameters don't go to the "page.jsp"...

If someone else runs into this, here is how I solved the problem -
          If you create a PrintWriter object with the autoflush option, it
          doesn't flush the underlying buffer till you call println on it. I
          looked through the generated code for the servlet, and it was doing a
          JSPWriter.print() to output information.
          So, I changed the ResponseWrapper to keep a handle to the PrintWriter
          object, and then flush it in the filter, and that works.
          Why the same code behaves differently in JRun & Weblogic, I'm not sure
          --Sridhar

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?

Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?

Yes.
Captfred

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

Can I run Release Candidate (19.02), Beta, Nightly, Aurora and ESR versions on the same computer?

I know I can run the Beta and Nightly together on the same computer because they are installed in different directories. What I do then is that I have a Profile for each version. What I do is I run FireFox.exe -ProfileManager when I start either the Beta and Nightly builds.
My Question is can I also install the Aurora, Release Candidate and ESR versions on the same computer like I do with the Beta and Nightly? If so, how do I go about installing them in different directories? I will create new profiles for each version. What I then do is, copy everything in my original Profile to the newly create profiles so I can keep all my plugin/addons, themes, bookmarks, etc. the same.
Next question, (I think I know the answer but I just want to make sure) now can I sync my bookmarks from each of the different profiles that I created?
Secondly, I now I can do the ABOUT:CONFIG in the address bar of Firefox, does anyone have any idea where I can read up on what each entry means? Also, are there any other secrets in Firefox, similar to the ABOUT:CONFIG trick? I know of one app where you can do ABOUT:ME, but that's all I know.
I know this has been asked billions of times, but I also have to ask. Is there any chance at all that Firefox, Thunderbird, and/or Seamonkey will be ever release for the iOS from Apple? I know that it's impossible, but maybe someone MIGHT have some positive thoughts on this?
Lastly, I know this is off topic, but I'll give it a shot. I'm using Outlook 2013, does anyone know if Outlook can handle Newsgroups? The reason why I ask is because I've just learned that there are a ton of newsgroups for Firefox, ThunderBird, and SeaMonkey. I would like to, somehow, get those Newsgroups in Outlook 2013. I already get allot of the feeds for other things, so that's not a problem.
I would appreciate it very much if anyone could help me with these issues.
Thank You.

You can consider to use Firefox Sync to sync all the profiles.
You can do a custom install of each version and install each version in its own program folder.<br />
Safest is to modify the desktop shortcut and add -P "profile name" to the command line to start each version with its own profile.<br />
Be careful with clicking a file in Windows Explorer to open the default browser, so make sure to select the correct profile in the profile manager and check the don't ask setting.
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

New pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan.

Have new pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan. It will print via usb and I've downloaded the full drivers Full_win_WW_140_408 but won't install. I've also tried to install the original drivers but they were for windows XP. The printer is approx 7 years old but still works (or did!)

Hello RevPhil,
Welcome to the forums!
I noticed your post about your printer not installing properly for you on your Windows 8.1.
I would suggest trying to use the HP Print and Scan Doctor to install the printer.
If that doesn't work, please let me know what exactly happens when you try to install, for example, do you see an error message or code? Does the installation stop?
Have you tried installing both USB and wireless methods?
Hope to hear back from you shorly!
Enjoy your weekend,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

Im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything

im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?

I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode.

Running Lion and Snow Leopard on the same MacBook Pro

So here's the thing .....apparently Lion won't run Photoshop and Illustrator CS2 (which I'm quite happy with and not about to shell out silly amounts of money to Adobe for even CS3) and apparently there may be (and I stress may be) problems with Word 2008 (likewise money to Microsoft for Word 2011).
I think, and probably won't know till I've installed it, that I'd like to try Lion on my Macbook Pro but keep Snow Leopard as a separate OS to run Photoshop, Illustrator and if necessary Word until I can afford to pay Adobe (& possibly Microsoft though I can't really see what improvements they can make to Word 2008) the large amounts of money they seem to think they deserve for an upgrade.
Does anybody out there know if it is possible to run both Lion and Snow Leopard on the same machine and if it is how do I do it?
Thanks for taking the time to read this.

Likely a corrupted cache file
Read the
Deeper cache cleaning/resetting
https://discussions.apple.com/docs/DOC-3046

I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.

I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.

22020134.exe is the file Adobe say you must download and run to instal Acrobat 7.0 Pro. I went through the process, the one described in your link, I downloaded the file, ran it, it runs well, except it tells me my serial number is invalid. Now what? Does this mean I now have to discard my Adobe Acrobat 7.0 Professional and start again with a $500 purchase? All I want to do is transfer what I have to another computer.

Running APEX 2.2.1 and 3.x through the same web server

Similar Messages

Maybe you are looking for