Running application from 9.3 in 10G

Hi,
I am very new to Oracle 10g
We have some J2EE application developed using
Oracle 9i JDeveloper and using the BC4J.
Is it possible to port this code onto 10G app
server?
ie porting from 9i to 10G.

We had problem when we deployed application build in 9i Jdeveloper in 10g AS. It was running fine on 9iAS but now application is deplyed no error. but buttons who have the jsp code are not working
Please help

Similar Messages

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can not Run Application from Client PC.

Hi,
I have a pc running on WinXP called "PC1". I have installed Oracle9i Database, Developer Suite 10g and services. I can run my application smoothly on "PC1".
My problem is that i can not run my application from client pc running on WinXP called "PC2". I have installed JINIT.exe on "PC2". I started OC4J also on "PC2". IE shows "Page can not be displayed" message.
What settings i have to do to run my application on Client i.e. "PC2".
Waiting for any kind of help.
Thanks.

Hi all,
Thanks for the reply.
I have already install same JINI.exe on Client "PC2" which is on Server "PC1". And the version of the IE and JINI are same on Server "PC1" and Client "PC2".
I start OC4J on Server.
Should i make some settings on JINI Control Panel on Client ? Like Proxies.
I have enable all check box on "Basic" Tab of JINI.
Further, On client, the check Box of "Show Java Console" is also on, but when i try to connect my application from IE, the Java console does not appear.
I would like to inform u that, when i start additional Proxy driver like Analog proxy on my server and then i give that proxy address and port in Client IE connection LAN setting, i am able to run my application from that Client.
But i think that is not the solution.
Waiting for reply.

Close a running application from java........

Hi all
I have opened an application say MSWORD from my java class using Runtime.getRuntime(), Now on close button i need to close the application and on the save button of the application i even want to save the application from java command
The question is HOW????
please reply,
Thanx,
Amitt

can I open the konsole from java??Yes.
First you must figure out how to do that from the command line yourself. That has nothing to do with java.
Note that that how you do that MUST account for the fact that the "command line" is actually a shell. Some commands must be run by running the shell as the actual command and then passing the desired command as an option to the shell (the actual command.)
Again you can google for examples.

Running application from installer in vista prevents drag and drop

Running a desktop application from Vista and Windows 7 through a wizzard, prevents doing a drag and drop from the desktop or another windows explorer to our java application.
We are using a windows wizard to install the application once it finishes it launches the application within the application the drag and drop work perfectly, but I can not drag from desktop or external windows explorer into my application, dragging from the application to the desktop or to another windows explorer is working fine.
If we run the application by clicking directly on the exe file (generated by the installer app), the application launches and do not present the anomaly (Drag and drop into a out side the applications work fine).
So the issue might be related to the way the installer executes the application, that maybe have a different configuration or windows permissions are not set correctly when started by the installer.
Both ways of launching the application have the same working directory the only difference i found was in the system environment (System.getenv()) the one that works has a SESSIONNAME key with a CONSOLE value in it, could this be the problem?
Any idea on how to workaround this issue or some idea to look at the installer will be kindly appreciated.

One idea is to use [Java Webstart|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] *(<- link)* as your installer. It might not fix the D'n'D problem, but at least if you get to the point of telling Sun about it, they will care (at least) one iota about fixing it.

Wtih Parental Controls on, need to allow run application from CD

Hello
I have restricted my sons access/login using the parental controls and everything is working well except that some of his apps run from CD i.e. Wiggles stuff
Anyway, with parental controls on his login does not allow these to run, we get a permission denied error. Is there any preference/control in Tiger or Leopard that will allow his apps to run?
Thanks
Rick

Boot Camp is most likely to work, but requires that you restart the computer to change OSes; nearly all Windows applications will work through this method.
Parallels Desktop and VMware Fusion run Windows from inside Mac OS X through emulation. Applications which require direct hardware access likely won't work, and this method is slower than Boot Camp. It is more convenient to use, as no restarts are needed.
CrossOver Mac and CrossOver Games translate the Windows instructions directly to Mac OS X ones. This is the cheapest method if you don 't already have Windows and the least compatible one.
Stating which applications you want to use will enable more specific advice to be provided.
(33288)

Error message running application from Jdeveloper/embedded OC4J

Does anyone know what configuration I am missing to be able to run a web application from JDeveloper with the embedded OC4J.
Here are the error messages that I am getting:
PM oracle.j2ee.jndi.JndiMessages warningInvalidResourceReference
WARNING: Resource reference jdbc/testdev not found. Allowing J2EEContext creation to continue anyway.
Nov 22, 2006 1:46:46 PM oracle.j2ee.jndi.JndiMessages warningNoTypeFoundAtLocation
WARNING: No javax.sql.DataSource found at null
I should be able to run the application from Jdeveloper development environment without deploying to Tomcat after each change.
There must be a jndi configuration that I need the questions is where?
Is this configuration or lack of configuration documented some where by Oracle?
Thanks

Hi, user544716,
did you solved the problem? I got exactly the same problem. In my case, my application runs well with jdeveloper 10.1.2 but when migrated to jdeveloper 10.1.3.1, the emdedded OC4J won't wrok and generated the same error as yours.
Thanks.

Error Message Running Application From MS Terminal Server. Ora-01019

Dear folks
I had this problem recently and this is the solution to it.
Applies to:
Oracle Server - Standard Edition - Version: 10.2.0.2
Information in this document applies to any platform.
Goal
#1. How to solve the ORA-01019 when running an application from terminal services without
administrative privileges?
Solution
There is a MS security option that has to be enabled for the non-administrative users.
Please grant "Create global objects" to the non-administrative privileges as indicated at:
http://technet2.microsoft.com/WindowsServer/en/Library/ba351dd0-aaf5-4e1e-b7dc-10a514842a0a1033.mspx
"You can configure this security setting by opening the appropriate policy and expanding the
console tree as such: Computer Configuration\Windows Settings\Security Settings\Local
Policies\User Rights Assignment\"
and retry

Caused By: Error at line:1 col:2 Got character[0] expected a valid XML character
The character in line 1 col 2 is not a valid XML character. Is the line 1 the XML prolog?
<?xml version=“1.0” encoding=“UTF-8” ?>

Run application from applet

is it possible to run an application from an applet? is so how can i go about doing this?

hey may be the use of Runtime can help u solve ur
prblm....
Runtime.exec("Application name");luck,
jayNope. You should know some basic things before trying to give answers.
If (unsigned/untrusted) applets could just run any other app, imagine the chaos when someone hits a rogue website containing an applet that executes something like "format c:"
You want to run an external program on the client's machine from an applet? You can't, thank heavens. You need to rethink your design.

Running applications from terminal [SOLVED]

I am brand-new to Arch and aside from Ubuntu, have no linux experience. I have arch up and running with openbox as my WM, but I am at a loss of how to run applications. I type firefox, or Thunar into the terminal and receive errors that read:
firefox: symbol lookup error: /usr/lib/libgtk-x11-2.0.so.0: undefined symbol: 9_datalist_get_data
or with obmenu:
ImportError: /usr/lib/libgtk-x11-2.0.so.0: undefined symbol: 9_datalist_get_data
Last edited by mynameisneo (2011-12-27 01:16:50)

You should read,
Beginners' Guide
The Arch Way
And please mark this thread as solved. Thanks.

Can I run applications from an external hard drive

Hi I am a sort a new Mac user and I would like to run Lightroom from an external drive. Is this possible on a Mac?
Thanks!

Yes, but it will load a little slower. If it does disk I/O from the external then that will also be slower.

MacBook Air Hard Drive too small - can I run applications from an external drive or is there a better solution?

I just got a MacBook Air 11" 10.7.2 2GB/64GB. I love it, but the internal drive is sooo small. Occasionally I need to take projects home from work or travel with my computer. Is there any way to run apps (Final Cut Studio, CS5, Office 10, etc) from an external drive? I am trying to convert over from my Macbook Pro (running Snow Leopard) and I can't seem to find a solution.
Thanks for your time!
Samantha

Samantha,
It's best to keep your applications on the internal drive and consider external storeage for your data.
Your choices are direct attached storeage to the USB port (external portable USB drives), storeage on your home or work network, or cloud-based storeage, like DropBox.
You can also look at slimming down your OSX installation on your MBA by removing unwanted fonts and printer drivers.
Btw, you will struggle to run CS5 and Final Cut Studio on a MBA with 2GB RAM. Only install the applications you really need on your MBA.
Can I ask which model MacBook Pro you are migrating from?

Windows XP, Java and long filenames when running application from a server

Hi,
I've been struggling with this for a while, can't understand why Windows XP seems to give me 8.3-filenames with ~ (tilde) instead of the full file- and path-names.
I've added a key in the registry, when a user right-clicks on a txt-file they get an option to open the file using my program. The key maps to:
javaw.exe -jar "\\networkdrive\automapper.jar" "\\networkdrive\Automapper.cfg" "%1"This basically means that javaw will be used to execute my automapper.jar and the automapper.cfg and filename/path will be added as parameters to my java-program. Notice that my jar-file resides on a network-server and not on my local machine. This works just fine though.
However, when I read the supplied filename in my java-code it is always in Windows 8.3-format using ~ to represent the missing chars. This is not a huge problem since everything works. The problem is that I convert the file and save it with a different file-ending, but with the same name (before the suffix). This means that the user runs my program on:
this_is_a_long_file_name.txtand ends up with his original file and my new file named something like:
this_i~1.qqqwhich admittedly looks ugly.
If I run the application locally on my machine everything works fine and the long file names seems to handled correctly. The problem only arises because the program is run from a server. This is a microsoft network, I do not know anything else about it, sorry.
Now I know, this is not strictly java-related, but I'm running out of options here and thought that perhaps one of you have solved this before. An option would be that I myself convert the short-filename to a long one, if that is possible? Any pointers would be greatly appreciated! If you don't know the answer, but know a good place to ask I would appreciate that as well.

It seems to me that if a File (in the java-sense) is created with a 8.3-path it retains that path, meaning that this code will always give the same result in both printLn-statements:
   System.out.Println("input: " + args[2]);
   File file = new File(args[2]
   System.out.Println("output: " + file.getName());will give the output
input: very_long_file_name_here.txt
output: very_long_file_name_here.txt
or
input: very_~1.txt
output: very_~1.txt
regards,
martin

Open/run application from DVD

Hi everyone,
Is it possible to run an application (either an .exe or .app file) from a menu architected in Encore? I have a DVD project, to which I created a desktop counterpart. I would like to give my user the option of running the desktop version. I know I can create a DVD with Video TS files and data files.... I was wondering, is it possible, if the DVD video files are ran from a desktop (Mac or PC), from the main menu of the DVD launch an application file (EXE or APP).
thank you for your time,
Rafa.

Encore works according to the DVD specification
The DVD specification does not include computer operations
So... no
What you could do is create a menu entry that goes to a title screen with instructions of what to do on a computer, and then put your computer content in the ROM section when you build the disc
But, as far as I know, the user will have to navigate to that section to view computer files, or run an EXE, manually
Or, use Macromedia Director http://www.adobe.com/products/director/ for mixed content

Porting j2ee application from Weblogic to Oracle 10g AS

What are the common guidelines/consideration when we port a J2EE application on Oracle Application server 10g. from WebLogic 8.1. If you have some inputs on pin points/guidelines/Architecture decisions that we might need to consider when we port a J2EE application on different J2EE application server
I got the link for app server migration but it is broken :
http://www.oracle.com/consulting/technology/appserver_migration_ds.pdf
Our application uses the following J2EE components
1. JDBC 2.0
2. JNDI
3. DAO
4. EJB
5. JMS
6. JAAS
7. JAVA Mails.
8. Servlets, JSP’s
I can think following point that needs to take care while porting
1. Its deployment configuration vis-a-vis the apps on top
2. The APIs it exposes (actually the information it allows the apps to pass in to the framework
3. The data it encapsulates (in order to be app-server agnostic; does it need to be now exposed to apps?)
Some J2EE specific areas
1. JNDI usage and exposure to apps 2. Properties files/XML files
2. Location specification 3. Resource bundle location specification
4. EJB deployment descriptors
5. Class/jar references between wars and ears
6. Jar sharing model across ears
7. Class loader differences across app-servers
8. JMS settings (queues, topics, factories, durability etc)
9. UI tags 10. Startup services
11. Managed services (JMX)
12. Security context passing
13. Clustered configurations if any and how they port across app-servers
Thanks
Santosh Maskar

This document is very old.
Take a look at the recent migration guide in the Oracle AS 10.1.3.1 documentation
http://download-uk.oracle.com/docs/cd/B31017_01/migrate.1013/b31269/toc.htm

Running application from 9.3 in 10G

Similar Messages

Maybe you are looking for