Running Apps 11i on Linux with 200 concurrent users
Hi,
Is there anybody out there running a large apps 11i installation (with the
database and middle tier) on Linux ?
We are currently running 11.5.9 Apps with a 9.2 database on Sun kit but I'd
like to investigate Linux/Intel as we are planning to replace our hardware.
We have about 200 concurrent users, with a total of 1800 registered users, using
Financials, i-Procurement and HR.
Thanks
Tony Vallis
Having worked extensively on Linux, its true that is is limitied in 32 bit mode to addressing a few GB of memory for each application (It is at least better than windows with its 2/3GB limit), although you can play around with it and memory windows to get more out of it for the database tier.
We have used 1 * 6650 with 8GB RAM running AS 2.1 DB Tier
and 2 * 2650 with 8 GB RAM ruuning AS 2.1 Apps Tier with conc mgrs too.
This was with 11.5.10 and it comfortabley supported 200 users. The servers were 2.8GHz Dual core Xeons. Redhat 3 or 4 would have been better becuase of a file cache issue on the database tier.
Also rememeber to consider Oracle licensing, A faster CPU might cost alot more but when oracle licenses are based on core/cpus then you may save alot more by having the highest power cpus u can (MHz rating not ness cores). Sun T2000 servers are quite nifty too if you want to stay with traditional unix kit but not want the price tag.
When workign at internally in Oracle We quoted one client a 3 * 4 CPU 6650 with 8GB in RAC config with 12 * 2 CPU 2650 with 4GB to support 5000 concurrent users. I wasnt convinced this would work at the time but the client had massively over estimated the number of users they would actually have so all was fine.
If I was doing this now I would go for a single 64bit DB tier with 4 CPUs and lots of memory, I would have lots of small8gb mid tiers 2850's, with a hard ware load balancer in front and a dedicated GB backend network. I would ony go for RAC if I needed the resiliance or had a large number of users e.g. 1000+
All in my opinion and I am in no way suggesting this as a solution for any other customers. Always perform a hardware siazing exercise in conjunction with your hardware vendor (remembering they always want you to buy more hadrware than u need).
Similar Messages
-
Has anyone worked on Apps 11i on Linux ?
What version of Linux is required to install R11i ?
Thanks in advance.You need Kernel version 2.2 or higher. I installed 11i on Redhat 6.1 which has 2.2.12-20 with out much problem. The only thing you might want to down load is the Motif Open Libraries from www.metrolink.com.
These libraies will be needed for bringing up the forms server after installation. Redhat does not ship these lib's with it. -
Cpu/ram Unix box(es) for 11iFinancials - 200 concurrent users
Hello -
cpu/ram of unix database server for 11i financials implementation...
200 concurrent users...
Is the 11i have an app server where concurrent managers run or are they on db server? How about 11?
nullJames,
if u r still interesting, contact me on my e-mail, i can send u some detail informations regarding to this.
Milan
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JAMES WHITTLE ([email protected]):
Hello -
cpu/ram of unix database server for 11i financials implementation...
200 concurrent users...
Is the 11i have an app server where concurrent managers run or are they on db server? How about 11?<HR></BLOCKQUOTE>
null -
Is there any issues if we planning to have more than 200 concurrent users
Is there any issues if we planning to have more than 200 concurrent users in BPS ?
Thanks,Depends a great deal on what type of users they are. Simply running reports? Should be manageable. All performing complex modelling - more of a problem.
And of course it depends a large deal on your supporting infrastructure as well! How many interactive processes can your server handle?
But back to planning, if these are all planning users - not just reporters - perhaps the biggest issue will be planning level design such that so many users are not locking each other constantly.
Be aware that locks are defined by the package definition that a user executes a layout or function against, and locks stay in place until the users ends his/her planning session - which means exiting a planning FOLDER or correctly existing the web application..... -
Installation of Oracle Apps 11i Realese 5 with 11.5.6 Family Pack
I am having problem starting the installation of this program.......Oracle Apps 11i Realese 5. I have Windows 2000 and would like to do CD installation rather than Stage installation.
I have downloaded and ran the JDK-1_1_8_009-Win. Here are the steps taken: I inserted the Red CD "Start Here" in my CD-ROM, opened the DOS prompt, and changed the C:> prompt to E:> prompt which is my CD-ROM drive, I then typed E:>cd rapidwiz....Enter, this opens E:\rapidwiz>, I then typed rapidwiz.cmd which was supposed to open my Oracle Universal Installer, butI got: E:\rapidwiz>start.\bin\launch.exe.RapidWiz.cL
E:\rapidwiz>
What do I do from here, do I insert the Disk 1 or what, because I have 14 CD's to be installed.Hi Timi,
Nice to see that you're involved in the setup of Oracle Applications 11.5.5. I see that you've run into a few roadblocks and while I am sure that I have a solution to the problem you're facing, it's a tad too long to get into on this forum.
If you could get in touch with me via E-Mail ([email protected]) or call me at 732 423 8023 (I'm available after 8pm EST), I'd be glad to help you out. Forgive me for saying so but the installation process is rather long and I have no desire to outline the entire process here.
Just curious, are you professionally associated with Oracle Applications or does it stem from a personal interest ?
I look forward to hearing from you.
Best Wishes,
Rajesh Aialavajjala -
Apps 11i disaster recovery with hot standby db
Hello,
We are trying to formulate a disaster recovery plan for Apps 11i (single node install) utilizing a hot standby database for the db layer and file synchronization
(rsync, rcp, whatever) of the application stack. We're comfortable with the hot standby db technology, but uncertain that simply keeping the application stack
sync'd on the standby host is sufficient to have a complete failover solution. Is anyone successfully using this type of configuration and , if so, is there a
cookbook methodology for promoting the standby system to a primary? Can you simply rename the host on the standby and turn the key on?
Thanks for any/all suggestions.
Terry RiddleHi,
we are planning a similar recovery strategy. Where can I find documentation about your strategy? A consultant has suggested has to install Legato with two products for DBs synchronization.
Thanks Gigi
My email: [email protected] -
"Nike + running" app will not sync with iPhone 5s
Since I got an iPhone 5s last week, my Nike + running app will not sync. Does anyone have experience with this?
I have the same problem and I don´t know how to solve.
-
Double-tapping to switch between or clear running apps is not working with iPhone 4s.
when I double tap to close out or switch between running functions, it does nothing ever since yesterday. I have the most current update since last week and the home button works for all other purposes so it's not broken. Now my battery is draining because I cannot shut off running apps. Please help!
Hi Kate,
Welcome to Apple Support Communities.
It sounds like you’re running into a multitasking issue that’s preventing you from switching between apps or forcing them to quit. Try restarting your iPhone, as shown in the article linked below.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, you can always try restoring the iPhone to factory settings too.
Use iTunes to restore your iOS device to factory settings - Apple Support
Cheers,
-Jason -
How can i run Apps 11i client on linux?....Plz help.
Hi There,
I have a very ridiculous problem. I have installed Oracle applications Rel 11i pack on my desktop on Red Hat Linux7.2. The problem is that when i try to access it using Netscape navigator it says that run Jinitiator on the machine. And Jinitiator is for windows platform only. Now i m struck at this point...Database is running,Concurrent Managers are running,Web server is running,Forms Server/Report Server is running...The only thing is that i cant access it..
Please help..its really very strange that oracle does not support Linux clients...no plugins are provided for it..so in a way indirectly still they are vouching the Microsoft monopoly.....?
Well please help me.....if anyone has any solution...
Thanx in Advance..
Deepak.Well put, Deepak. We also cannot believe that Oracle does not yet support Linux on the client side (especially Red Hat versions which are widely deployed). Our teams are also battling with this issue as we are desperately trying to move away from the MS-onopoly. Surely the big O will hear the pleas of its customers and get their act together soon...
Regards
Mike -
How to close running apps on iPod touch with new update
I can't figure out how to close apps to save battery life since this update. Any resources on how to operate the iPod touch with the new update would be appreciated.
Double click the Home button and swipe the thumbnail of the app (not the app icon) upwards to delete/close the app.
That is included in the manual
ios 7.0 ipod touch Manual -
While installatting oracle apps 11i on linux redhat 4 geting following errr
it showing System Utilities check failed with following error
error code:
RW-50011Hi;
This is generic error, please check log file for more details.For log file please check my blog:
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r11/
Also check my blog for installation steps,requirement etc.
http://heliosguneserol.wordpress.com/category/step-by-step-oracle-e-business-suite-installation/oracle-e-business-suite-release-11/
Regard
Helios -
Jvm required for 200 concurrent users.
Hi,
we are planning for servelet based connection , we have 200 users who are concurrenly accessing our applications
as servelet connections will be based on jvms , so how many jvms needs for the smoot accesing or performce and how can we increase the jvms in oracle 11i.
farhan.Hi farhan;
Please check below and see its helpful for your issue:
JVM
Re: jvm
Re: Reg:apps jvm
jvm
Re: jvm
Regard
Helios -
Share core 9iAS (Linux) with other local users?
Finally set up core 9iAS on Red Hat. Now I'd like to know how to configure it to either start as a system service, be runnable by users other than 'oracle', or be persistent even after 'oracle' logs off. Bottom line: disassociate the 9iAS processes from the 'oracle' user session.
Since I only have one dual-boot Linux box for dev purpose (no dedicated server here! :-)), what I want to do is to first start 9iAS, then connect to it from a regular user account via JDeveloper.
Tried changing file permissions and using nohup - neither works.
Thanks,
MilesCreating new users for SMB access is way too complicated, because Apple has not really implemented the "sharing user" fully for SMB users. Thus, when you create a new user, and go to System Prefs -> Sharing -> File Sharing -> Options, the sharing user is NOT listed under the users to enable for access via SMB.
However, there is a workaround that can get your "sharing user" up and going via SMB.
1. Go to System Prefs -> Accounts. Click on the padlock to authenticate as admin.
2. Then right click on your "sharing only" user (not Guest) and select "advanced...".
3. There you will see that the Login Shell is set to a particular value (/usr/bin/false from memory). Take note of the value that is there.
4. Change this value (from the drop down list) to "/bin/bash".
5. Go to Sharing -> File Sharing -> Options... You will see that your sharing only user is now listed under SMB sharing.
6. Tick the box for SMB sharing on the sharing only user and enter the password for that user.
7. Go back to Accounts. Right click on your "sharing only" user and select "advanced..."
8. Type in the value that you took note of in step 3 at "Login Shell" (and press ok).
That's it! Now you can connect from Windows using the new sharing only user.
In effect, this process temporarily enable the "sharing only" user for shell login to your Mac. By doing so, it enables the SMB password to be set. You then disable the shell login capability , and SMB sharing is enabled, whilst shell login is disabled.
If you ever want to remove SMB access through that user, you will need to repeat the steps again, (although this time you will have to untick the box in step 6.
Cheers,
Rodney
p.s. I have done this, and it works well for me. That said, you should back up your system before mucking around with advanced options. Just to be on the safe side. -
XML Publisher has bad performance with 10 concurrent users.
PeopleTools version:Tools: 8.48.09
OS/RDBMS Version*( required for Tools Forums): Oracle 10.2.0.4
Application type and version:
Description of the Problem/Question:
Customer currently testing a process which exposes XML publisher functionality via self service. The process calls an app engine which
generates an XML file, processed by XML Publisher, and then displayed in the browser window.
They have found that any more than ten or so users in our test environment (two app servers, one web server per app server) seems to slow
the process to a halt, even causing some requests to go unprocessed. The bottleneck seems to be at the web server (WebLogic) as the
database and app server performance metrics are very good, however PeopleSoft Ping suggests that the web server is having trouble.
production environment has 8 app servers, one web server per app server. Are there any configuration changes we can make to improve
the serving of PDFs from XML publisher output? Add more web servers per app server? WebLogic java VM heap settings?
WebLogic Server 8.1 SP5
Tuxedo: Version 8.1, 64-bit, Patch Level 192
Any other thoughts on performance degrade with XML Publisher with more than 10 users.
Are there any configuration changes we can make to improve the serving of PDFs from XML publisher output? Add more web servers per app server?
ThanksThere are currently two known operations that are seriously slower in update 10:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6635462
and
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6652116
(taken from the release notes).
You can disable the hardware pipeline to basically go back to the old situation as it was in update 7 if it is giving your problems. I wouldn't know why simple fill actions would be bogging it down though, it smells like something is done wrong in your app. -
RW-50004 during Apps 11i installation on Linux
Hi,
I am trying to install Oracle Apps 11i on Linux. Main error is can't find libjava.so.
Settings are as follows:
Linux version 2.6.9-89.0.25.0.1.ELsmp ([email protected]) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-11.0.1))
Kernel=2.6.9-89.0.25.0.1.ELsmp
model name : AMD Opteron(tm) Processor 875
Apps version: 11.5.10.2
Error: RW-50004: Error code received...Running APPL_TOP Install Driver for PROD instance
Error encountered during: Step 3 of 5 i.e. Registering iAS ORACLE_HOME with OUI Inventory
Log File: /u01/app/oracle/prodappl/admin/PROD_sid/log/05220624.log
Log file extract:
Executing: /u01/app/oracle/prodcomn/temp/adrunias.sh APPS APPS
STARTED INSTALL PHASE : APPS TECH STACK : Sat May 22 19:50:22 EDT 2010
runProcess_9
Statusstring Registering iAS ORACLE_HOME with OUI inventory
Error: can't find libjava.so.
Errors while registering Oracle Home in the inventory
Code where the error occurs i.e. from adrunias.sh
$JAVA_LOC -mx600M -classpath $CLASSPATH oracle.apps.ad.clone.util.OracleHomeCloner -registerOUI -ohPath /u01/app/oracle/prodora/iAS -ohName APPSIAS_PROD
I tried copying libjava.so to all directories mentioned in LD_LIBRARY_PATH i.e. /usr/lib:/usr/X11R6/lib:/usr/java/jdk1.5.0_22/jre/lib/amd64
Appreciate any help on this.
ThanksHi,
As per the doc 357006.1, I downloaded a patch but even patch installation gives the same error.
As per the 2nd doc 1076893.1, following is the output:
# uname -a
Linux orcl 2.6.9-89.0.25.0.1.ELsmp #1 SMP...EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/redhat-release
Enterprise Linux Server release 5.2 (Carthage)
Not sure if 64-bit OS is causing this or not.
Thanks
Maybe you are looking for
-
Error while opening the report or sheet in the desktop
While opening the reports it gives error as " Failed to Connect Database". In Some reports it gives error as "Unable to Load EUL item". Then we check the Menu bar, Tool ----> Options --->EUL. We found, it is giving Default EUL as blank. Now it is not
-
Cannot get native resolution on my external monitor
System: - IBM Thinkpad T42p (display works intermittently) - Samsung Syncmaster 2333SW (1920x1080 native res.) - ATI Mobility Fire GL T2 (Driver vers. 6.14.10.6422) 1920x 1080 does not seem to be available through control panel for my external monito
-
Trouble Digitizing - video stops for a sec then starts again
Hello - I am having a problem digitizing from miniDV. I am using Final Cut Pro HD 4.5 When I am digitizing footage, the video will stop while the audio continues and then the video will pick back up again. The digitized footage reflects this problem
-
This is a related question to that described in: (http://discussions.apple.com/thread.jspa?threadID=1857176&tstart=0) of today which I note has been "Answered" and therefore may not be viewed further. Hi guys! This is a separate but related topic tha
-
Hi, i'm trying to use auto deployement to make the descriptors for my ejb1.1, but the problem is that in the weblogic.jar file, there isn't an ejb11 dir (weblogic.ant.taskdefs.ajb11.DDInit) -> so i thought that wls was s