Running BAT to create ADP on users associated with two devices

Problem Details: I have a couple question about behavior of the Bulk Administration Tool that allows you to automatically generate Device Profiles.
1) If a user is associated to a 7941 and a IP Communicator and you run the tool and select to use the personal profile as the logout profile will it set the user as the logout profile for both of the associated devices?
2) Does it port Speed Dials as well as lines?

When you select the logout profile for the user, it will be applied to all the associated devices for that particular user.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008087416c.shtml

Similar Messages

Where in BAT for "Users Associated with Line" field......

Hi All,
I am trying to find where I can export all user lines via BAT to see if they have an assignment for “Users Associated with Line”.
Basically, I have administered approx 1000 phones (some UDP and some not) however I was unaware that I needed to administer this field for CUPC etc….
I have looked at other posts that explain to update line appearance under the “Users” in BAT however this does no contain the field that I am looking for.
In essence, I need to export all user lines, wash the data for who is not administered for this, then BAT in a change to associate users with line.
Any help much appreciated!

Hi,
I use phones first and than the users option to upload using BAT.
In th phone's tab, edit the the Maximum number of phone lines according to your requirement and click on the Create file format and select Directory Number in the Line field as shown below.
And create your phones with MAC, Description,Phone lines and upload it, make sure it gets uploaded successfully.
Now come to Users tab in the Bat.xlt file, here click on the Number of Controlled Devices as 1 (we are basically making phone as the controlled device to the users, phone already has lines as mentioned in the above step). And fill rest of the other details and upload it.
Note: You can mention the Primary extension and IPCC Extension as part of this operation only.
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers !!

Users Associated with Line CUCM9

Our wonderfull HR Staff ran a script that wiped out our IP phone field in AD over the weekend. All of the user accounts got wired out by th e garbage collector before anyone knwe that this has happened . I have afull export from a month ago and was able to get the Owner User ID added to the devices, and the primary and IPCC phone extensions restored. I'm trying to find a way to get the Users Associated with Line filed populated using bulk Admin. I cannot find where to do that. We are running CUCM 9.1
Thanks for any help.

Hi Michael,
You can try the following steps and let me know how it goes.
Create a .txt file format with the following headers, comma separated:
    User ID,Device,Directory Number,Partition
In the lines below the headers, add the corresponding information, comma-separated.
Example, assuming you want to associate user1 to directory number 1001 and user2 to directory number 1002:
        User ID,Device,Directory Number,Partition
        euser1,SEP001122aabbcc,1001,PT-A
        euser2,SEP002211aabbcc,1002,PT-B
You can use Excel to create the file. Save as a .csv file, then rename the file to .txt. Open it to make sure the format matches the one above.
Then got to CallManager Admin Page -> Bulk Administration -> Upload/Download Files, hit "Add new", browse to your file, then select the following targets:
Target: User Line Appearance
Transaction type: Update Line Appearance - Custom File
Verify that the file has been uploaded, then go to Bulk Administration -> Users-> Line Appearance -> Update Line Appearance.
* Under "File name", drop down and select the file you uploaded.
* Do not add any of the checkmarks below, leave empty.
* Click the "Run immediately" radio button.
* Click "Submit"
HTH
Manish

How can I get all users associated with my VSO

I see here: https://www.visualstudio.com/en-us/integrate/api/shared/profiles that I can get my profile info from the API, but can I get all users associated with an account?

Hello!
If you want to see all of that in a single mailbox, you can create a Smart Mailbox from the "file" menu in the top left corner of your screen. It's a bit of trial and error before you get the rules correct, perhaps, but that will work.

WiFi User associating with far AP not with near AP

Hi,
We have two WLC 4402 and around 20 APs model1252G, I have manually distributed between both WLCs.
Problem which I am describing is only associated with single user. User have three APs in its surrounding, AP "One" is placed near by 10 feet, AP "Two" is placed on above floor (with same location) and AP "Three" is placed on below floor (on same location). I am using 1, 2, 6, 11 non-overlapping channels and did not assign same channel on two floor continous.
Problem:
User associating with far AP but not with near AP, due to this user faced low strength. I have increased AP "One" power but it does not worked out.
Need help.
Many thanks in advance.
Regards,
Arsalan

Hi Arsalan,
Thanks for the reply!!
Yes we can configure that!! This feature name depends on the WLC software that you are running..
If ur WLC is running 4.2 WLC code and below.. then thisfeature is called WLAN OVERRIDE , here is the link to do it.. (find for WLAN override 2nd search you will find the feature info and config as well)
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a00808b4c61.shtml
if ur WLC is above 4.2 or later, then its called AP-Grouping. here is the link..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Slow email send/receive for user associated with beehiveonline

It takes hours to send/receive an email to/from the user associated with my beehiveonline workspace. Also, the number of emails that we receive has decreased, it may be not related at all, but there is no way for me to check if that's just due to low customer activity or to timeouts.

Hi,
If you have issues then let us know the date/time of the issue and the degree of delay you are seeeing and we can check if there may be a reason for the delay.
Phil

How to create a new user aaa with same rights as existing user bbb ?

Assume user bbb already exists in Oracla 10g database.
How can I create a new user aaa with the same rights/permissions as the old user bbb?
Is this procedure/command also working if the old user is user "system" (=dbadmin)?

There is some possibilty to generate a EXPDP dump file which contains only DDL statements related to account and
privileges: EXCLUDE/INCLUDE parameter can help.
For example, following EXPDP statements seem to work with SYSTEM account:
expdp / schemas=system content=metadata_only exclude=table,sequence,package,function,procedure,synonym,,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
Export: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:41:36
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Starting "OPS$XXX"."SYS_EXPORT_SCHEMA_01": /******** schemas=system con
tent=metadata_only exclude=table,sequence,package,function,procedure,synonym,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
Master table "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully loaded/unload
ed
Dump file set for OPS$XXX.SYS_EXPORT_SCHEMA_01 is:
C:\TEMP\SYSTEM.DMP
Job "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully completed at 09:41:41
impdp / sqlfile=dpd:system.sql dumpfile=DPD:system.dmp logfile=DPD:system.logImport: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:42:46
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Master table "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully loaded/unload
ed
Starting "OPS$XXX"."SYS_SQL_FILE_FULL_05": /******** sqlfile=dpd:system
.sql dumpfile=DPD:system.dmp logfile=DPD:system.log
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
Job "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully completed at 09:42:50and system.sql is:
-- CONNECT OPS$XXX
-- new object type path is: SCHEMA_EXPORT/USER
-- CONNECT SYSTEM
ALTER USER "SYSTEM" IDENTIFIED BY VALUES '970BAA5B81930A40'
TEMPORARY TABLESPACE "TEMP";
-- new object type path is: SCHEMA_EXPORT/SYSTEM_GRANT
GRANT GLOBAL QUERY REWRITE TO "SYSTEM";
GRANT CREATE MATERIALIZED VIEW TO "SYSTEM";
GRANT SELECT ANY TABLE TO "SYSTEM";
GRANT CREATE TABLE TO "SYSTEM";
GRANT UNLIMITED TABLESPACE TO "SYSTEM" WITH ADMIN OPTION;
-- new object type path is: SCHEMA_EXPORT/ROLE_GRANT
GRANT "DBA" TO "SYSTEM" WITH ADMIN OPTION;
GRANT "AQ_ADMINISTRATOR_ROLE" TO "SYSTEM" WITH ADMIN OPTION;
GRANT "MGMT_USER" TO "SYSTEM";
-- new object type path is: SCHEMA_EXPORT/DEFAULT_ROLE
ALTER USER "SYSTEM" DEFAULT ROLE ALL;
-- new object type path is: SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
BEGIN
sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'BAS002.REGRESS.RDBMS.DEV.US.ORACLE.COM', inst_scn=>'1456160');
COMMIT;
END;
-- new object type path is: SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.CLEANUP_SCHEMA_IMPORT;
COMMIT;
END;
/ These export and import steps don't take into account privileges granted on schema objects belonging to another user likely due to to the EXCLUDE statements.
Message was edited by:
Pierre Forstmann

ISupport - register a person as a user associated with his/her Person Party

Hi,
iSupport 11.5.10.2
I have a situation in my organisation where I would like to register an individual as an iSupport User associated with his / her Person Party Number.
For example: John Doe has been set up in the system as a Person Party, and has an Account Number generated. He has certain Service Contracts and Install Base records associated with the Account Number. John Doe would like to register through the iSupport portal and be associated with the above Party / Account Number and be able to update his IB, check Orders and Invoices.
Can this be done using any of the existing (seeded) Usertypes, Enrollments etc.?
Thanks and Regards.

This cannot be done in 11.5.10.
But we have this feature in R12.

BB ID isn't associated with a device running BB 10

In my continuing fight to get the latest version of BB Link to work, I now get a message out of the blue saying "The BlackBerry ID [name of my BlackBerry ID] isn't associated with a device running BlackBerry 10 [operating system]". I don't understand this. Before I downloaded the latest version of BB Link [123_b046 / OS version 10.2.1.3175 / Software release 10.2.1.29.41] myBlackBerry ID was unquestionably associated with a device running BB 10. Can anyone tell me what's happened and how I go about reassociating my BB ID with my Q10? Thank you.

Yup same here!
Slàinte.
Not all things are good.
Not all things are evil.
But with an open mind...
You can see the difference.
Knowledge is power.

We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?

We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?

Welcome to the Apple Community.
That's simply not possible I'm afraid. You'd need to give them their own account and allowance or make it so you are required to be there to input the password when they wish to make a purchase.

HT203433 How can I delete an iTunes account from my iPhone so it's no longer associated with my device?

How can I delete an iTunes account from my iPhone so it's no longer associated with my device?

If you mean that it has the 90 day association : http://support.apple.com/kb/HT4627
then you can either wait for the 90 days to complete, or you can try contacting iTunes Support and see if they can remove the association : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I have two iTunes accounts. When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad. Ian trying to link it to the other account instead

I have two iTunes accounts. When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead

johnfromnorth andover wrote:
I have two iTunes accounts
Why?
When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
You want to uise the newer account with the iPad?
Settings > Store.
Tap account, sign out then sign in with the account you want.

I sold my iphone 3gs to a friend and then i bought it back and reset it now it says apple ID is associated with another device and cant use my ID for 90 days, how do i get around that?

How do i get my iphone 3gs to accept my appleID after selling to a friend (reset) and buying back from friend (reset again) now phone says appleID is already associated with another device and i have to waiy 90 days. How do i fix this problem?

email me at <Edited by Host> ASAP!!!

Handle Form Setting in a user form with two DataGrid

Hi,
I have a user form with two dataGrid.
I'd like to handle the 'form settings' button for both DataGrid, but i'm not able to do it (i'm able just for the first matrix)
This is the code:
form.Settings.Enabled = True
form.Settings.MatrixUID = GRID1
There is the possibilities to swicth from GRID1 to GRID2?
Regards
Marco

Hi Marc,
you can active the settings only for one of them
the second point is that you enable the old one.
first change the UID than enable it.
frm.Settings.MatrixUID = "mtxList2"
frm.Settings.Enabled = True
regards
David

What to do when an apple device is associated with two Apple ids

Hi, my iPod is associated with two ape ids at the same time and are having some kibs of glitches and I was wondering how to get my ipod to only be associated eith one of the two ids.

Just how is the iPod associated with two IDs?
Just what kind of "some kibs of glitches" are you experiencing?

Running BAT to create ADP on users associated with two devices

Similar Messages

Maybe you are looking for