Running BDC in 'A' mode when called from Enterprise portal
HI All,
I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
cm_no_data_received
rfc_error_communication
what changes i have to do so that i can run the BDC in 'A ' mode when called from Enterprise portal
it would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated
Similar Messages
-
SAP XI error: 401 Unauthorized (When calling from Enterprise Portal)
Hello Friends
I am trying to access an SAP table from IVIEW of portal via XI. Using the latest and greatest version of all SAP Components. (We just installed couple of weeks back).
I keep getting the following error message when I try to access data from IVIEW of portal.
"SAP XI error: 401 Unauthorized"
What may be the reason? If some one can help me, I would really appreciate it.
Thanks
RamThanks Srinivas for your help.
I tried accessing the URL directly and got the error message
"User Credentials not passed via Enterprise Portal. Please contact your Administrator"
Any more suggestions?
Thanks again
Ram -
How to open a MD form in insert mode when calling from URL ?
I have a MD form and I want to open it in 'insert' mode when I click on the URL.
How can I do that ?
thanks,
MainakI think somebody has asked the same questions earlier but I cannot find the link to that message. Please can anyone help me ?
How to open a form in Insert mode from url link ?
Mainak -
Stored Procedure Does Not Run Properly When Called From Portlet
We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
Our problem:
The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.Any Ideas?
-
Hi,
I've come across a very strange problem, we've been using some fairly simple macro's within excel for the last few months, I've recently come into a strange problem.
I decided to make things easier by putting commands onto the ribbon and creating an addin, as this code is reused by most of our workbooks, and having thousands of files with this code in seems like an awesome way to fill up our drives :)
Basically the code seems to just ignore the saveas command when run from the ribbon, code runs, ends saying successful, in the debugger stepping over the code it appears to step over the saveas command as appears that it's been excused without fail, however
no file gets created, workbook does not get saved and it keeps its original book<x> caption
here's a quick example of my code, I have a class module registering application commands
the ribbon button i'm using is just a print button, using the application print which then calls this before print function
this is the code that fires from the ribbon, we always print out 2 copies i'm not sure if this can be simplified?
If Application.Workbooks.Count = 0 Then Exit Sub
If CheckRangeExists("BVSID") = 1 Then
ActiveWindow.SelectedSheets.PrintOut Copies:=2, Collate:=True, IgnorePrintAreas:=False
End If
Using CTRL P or File Print this works fine, BeforePrint triggers each time, but within Save Invoice it calls the Application.SaveAs function, when this print is fired from the ribbon this simply seems to get ignored
Private Sub App_WorkbookBeforePrint(ByVal Wb As Workbook, Cancel As Boolean)
'check worksheet belongs to bvs plugin
If CheckRangeExists("BVSID") = 1 Then
'code to save
If SaveInvoice = 0 Then Cancel = True
End If
End Sub
incase there is something weird i'm missing, this is the line that throws up no errrors, simply doesn't work, more annoyingly the SaveInvoice function returns no error, which in turn prints out the document, and its only until after you check for the file
you would realise it didn't save, I've since put a check in to check the file has saved, so far everysingle time it does not save from the ribbon, pressing CTRL P or clicking File Print will always save the file?
ActiveWorkbook.SaveAs Filename:=Path & Range("Invoice").Value & ".xlsx", FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False
before I have Application.DisplayAlerts = False and after Application.DisplayAlerts = True
As the code is within an Addin my probably overly basic idea is to create a hidden range with the name BVSID, with the idea the events only fire with the sheets I've created
Finally, If I type the
ActiveWindow.SelectedSheets.PrintOut Copies:=2, Collate:=True, IgnorePrintAreas:=False
in the debug window the code also runs, triggers the before print and saves the files
any help would be most appreciated :)Thanks for the time!
it works fine when using the normal print button on the custom ui, its when using a macro combined with
ActiveWindow.SelectedSheets.PrintOut
I've just created a blank workbook, with a class module to capture the before print, I've put 2 buttons on the custom ribbon, one using the default command, and the other to call a macro to reference the printout command
before print gets activated on both tries, however the saveas command gets ignored, seems to run, but not do anything when called using the .PrintOut command.
Here's the code I've used to test
This Workbook code
Private XLApp As CExcelEvents
'set applications to be avaliable in the cexcelevents class module
Private Sub Workbook_Open()
Set XLApp = New CExcelEvents
End Sub
Module for custom button (not actually sure if this needs to be in a module but this is to mimic the same behaviour i'm getting with the addin
Sub PrintInvoice(control As IRibbonControl)
ActiveWindow.SelectedSheets.PrintOut Copies:=2, Collate:=True, IgnorePrintAreas:=False
End Sub
Class Events CExcelEvents
'get application events
Private WithEvents App As Application
Private Sub App_WorkbookBeforePrint(ByVal Wb As Workbook, Cancel As Boolean)
ActiveWorkbook.SaveAs "C:\Test\Book1_Copy.xlsm", XlFileFormat.xlOpenXMLWorkbookMacroEnabled
End Sub
Private Sub Class_Initialize()
Set App = Application
End Sub
Private Sub Class_Terminate()
Set App = Nothing
End Sub
CustomUI Code
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui">
<ribbon startFromScratch="false">
<tabs>
<tab id="customTab" label="Custom Tab">
<group id="customGroup" label="Custom Group">
<button idMso="FilePrint" imageMso="FilePrint" size="large"/>
<button id="btnPrint" label="Print" imageMso="FilePrint" size="large" onAction="PrintInvoice" supertip="Saves Invoice Then Prints to Default Printer" enabled="true"/>
</group>
</tab>
</tabs>
</ribbon>
</customUI>
the button id btnprint is what I've been testing with so I copy pasted that button from the customui code I had
I can't see away to add the workbook as an attachment, if needed I can upload it here too, this workbook was just created from scratch just incase its the addin I've got making some weird error -
Crystal Reports 2008 fails when called from e Web Service under 64bit OS
I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don -
Bring Excel 2007 to the front when called from LabView v9 in Windows 7
I am building a duplicate system using Windows 7, LabView v9 and Excel v2007. The original system used WinXP, Excel 2007 and LabView v8.6. The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible. This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front. The icon blinks in the Win7 taskbar and when selected displays over LabView. If I minimize the Labview window, Excel is there. This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar. The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode. At the customers request, the new system uses the .xlsm extension on the Excel template files. I have tried using application.visible = True in the macro as well. Could be a setting in Labview? Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview.
HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
Thank you in advance
Stephen
Solved!
Go to Solution.I will try the windowstate change. Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls?
I am not sure about the API since the discussion there is with regard to DDE. (Taken from the link document: If you want to call a DLL that contains ActiveX
objects, use the Automation
Open VI with the Property
Node and the Invoke
Node.). I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be. Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work? I may be trying this already but in Excel through the use of the macro I call from LabView. It contains application.visible = True at the beginning before reading files and plotting data.
I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro. The puzzle for me is the blinking Excel icon in the task bar. This means active and running but not visible or something wrong as well. There are a few #VALUE cells if not all test in the system are run. Again not a problem in Excel 2007-WinXP-LV8.6
Thank you again one and all. -
HR_INFOTYPE_OPERATION not working when called from Dynamic action
Hi ,
Senario : I would like to execute a form from dynamic action which
creates a record in 0015 (Additional payment IT) .
I have writen the code as shown below am using FM HR_INFOTYPE_OPERATION
. When i execute the program from se38 it is creating a record, however it is
not created when it is called from dynamic action..when i debugged the code in
inside the FM HR_INFOTYPE_OPERATION there is a FM HR_MAINTAIN_MASTERDATA where
they are using call dialog (statement) and
sy-oncom = 'N' when called from Dynamic action and
sy-oncom = 'S' when called executed directly.
I tried to change the sy-oncom to S while run from Dynamic action it created
the record.
So Can anyone explain me abt sy-oncom and how can i resolve the issue..
code..
REPORT ZHRPYENH01 .
perFORM TERMIATION_9000.
INCLUDE DBPNPMAC.
FORM Termiation_9000 *
FORM TERMIATION_9000.
INFOTYPES : 0015.
*data : i .
*i ='c'.
*break-point.
*message i000(000) with i.
TABLES : PRELP.
DATA : P9000 TYPE PA9000." with header line.
DATA : P0000 TYPE STANDARD TABLE OF P0000 WITH HEADER LINE.
DATA : P0015 TYPE STANDARD TABLE OF P0015 WITH HEADER LINE.
DATA : HIRE_DATE LIKE SY-DATUM,
TERM_DATE LIKE SY-DATUM.
DATA : MOLGA LIKE T500L-MOLGA VALUE '25',
SEQNR LIKE PC261-SEQNR.
DATA : RGDIR TYPE STANDARD TABLE OF PC261 WITH HEADER LINE.
DATA : ACTUAL_PERIOD LIKE PA9000-RETENTION.
DATA : PNP-SW-FOUND TYPE SY-SUBRC ,
PNP-SY-TABIX TYPE SY-TABIX.
DATA : TER_PERNR LIKE PA0001-PERNR.
DATA : REF_PERNR LIKE PA0001-PERNR.
data : key type BAPIPAKEY.
data : payed_amount type p0015-BETRG.
data : future_payment_amount type p0015-BETRG.
data : p0002 like pa0002.
types : begin of t_deduction ,
deducation_date like p0015-begda,
future_payment_amount type p0015-BETRG.
types : end of t_deduction.
data : future_deduction type standard table of t_deduction with
*header line.
data : future_deduction type t_deduction .
data : RETURN type BAPIRETURN1.
*data : deduction_p0015 like standard table of p0015 with header line.
data : deduction_p0015 like p0015 .
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
****Prepare 0015 data for deduction
*deduction for payed amount
clear deduction_p0015.
*refresh deduction_p0015.
deduction_p0015-pernr = REF_PERNR.
*deduction_p0015-pernr = TER_PERNR.
deduction_p0015-lgart = 'M120'.
deduction_p0015-begda = sy-datum + 1 .
deduction_p0015-endda = sy-datum + 1 .
deduction_p0015-BETRG = payed_amount.
deduction_p0015-WAERS = 'SGD'.
deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
**deduction for future payment amount
*loop at future_deduction.
*clear deduction_p0015.
*deduction_p0015-pernr = REF_PERNR.
**deduction_p0015-pernr = TER_PERNR.
*deduction_p0015-lgart = 'M120'.
*deduction_p0015-begda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-endda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-BETRG = future_deduction-future_payment_amount.
*deduction_p0015-WAERS = 'SGD'.
*deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
*endloop.
Create a deduction wage type in 0015 for the employee
break-point.
CLEAR RETURN.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
NUMBER = REF_PERNR
VALIDITYBEGIN = '18000101'
IMPORTING
RETURN = return
if not return is initial.
message E000(000) with
'Referred Employee could not be locked for referal payment deducation,
please try after some time'.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '0015'
NUMBER = REF_PERNR
SUBTYPE = 'M120'
OBJECTID =
LOCKINDICATOR =
VALIDITYEND = SY-DATUM
VALIDITYBEGIN = SY-DATUM
RECORDNUMBER =
RECORD = deduction_p0015
OPERATION = 'COPY'
TCLAS = 'A'
DIALOG_MODE = '2'
NOCOMMIT =
VIEW_IDENTIFIER =
SECONDARY_RECORD =
IMPORTING
RETURN = return
KEY = key
break-point.
COMMIT WORK.
if not return is initial.
*return-TYPE
*ID
*NUMBER
*MESSAGE
message I000(000) with return-MESSAGE.
endif.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
NUMBER = REF_PERNR
VALIDITYBEGIN = '18000101'
IMPORTING
RETURN = return
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Thanks and regards
-Senthil Bala
Message was edited by: senthil balaHi Senthil
Why at all U want a subroutine to create a record in IT0015 through Dynamic action.There are some standard codes available to update infotypes.
Let me give U an example
14 9CON BETRG 4 2 I INS,0015 This will create a record in IT0015 when IT0014 is updated with Wagetype 9CON
14 9CON BETRG 4 3 W P0015-LGART='5400' Set wagetype for IT0015(Here U can use a subroutine call to set the wagetype)
14 9CON BETRG 4 4 W P0015-BETRG=P0014-BETRG set amount for IT0015(Here U can use a subroutine call to get the amount)
14 9CON BETRG 4 5 W P0015-BEGDA=P0014-ENDDA set the dates(Here U can use a subroutine call to set the dates)
Hope this will help U.
Please award points if helpful -
JTextField update problem when called from PropertyChangeEvent
Hi,
I'm trying to create forms that can be dynamically loaded with Class.forname(formName).
Those forms should always inherit some methods that make it easy to pass data to
them and receive data from them. The idea is that the data comes from a table which
sends a hashmap (String column/JTextField-name + String Value pairs) with firePropertyChanged
as soon as a new row is seleceted. The JTextFields in the form are marked with setName("FieldName") that has to correspond to the name of the columns of the table.
My problem is that I can't update the fields in my form when I'm calling getRow(HashMap)
from within propertyChangeEvent but that's necessary to keep the forms flexible.
JTextFieldName.setText(newText) just won't work. But it works when I call getRow(HashMap)
from the constructor. SwingWorker and threads to update the form didn't help.
I don't need to call pack() / update() / repaint() on the JFrame, do I ??
update() / validate() / repaint() etc. didn't work on the JTextField themselves.
Below is the code for one of the test-forms (just a JPanel that is inserted in a frame)
with all of it's methods. Does anybody have a solution to this problem ??
Thanks for taking time for that !!
Benjamin
* testTable.java
* Created on 15. April 2004, 16:12
package viewcontrol.GUI;
* @author gerbarmb
import javax.swing.*;
import java.awt.*;
import java.beans.*;
import java.util.*;
public class testTable extends javax.swing.JPanel
implements
java.awt.event.KeyListener,
java.beans.PropertyChangeListener {
* public static void main(String[] argv) { testTable tt = new testTable();
* JFrame jf = new JFrame(); jf.setContentPane(tt); jf.setVisible(true); }
/** Creates new customizer testTable */
public testTable() {
initComponents();
HashMap hm = new HashMap();
* Only for debugging, to see that the method getRow() works when
* called from the constructor.
hm.put("ttext", "TEst");
this.getRow(hm);
* This method is called from within the constructor to initialize the form.
* WARNING: Do NOT modify this code. The content of this method is always
* regenerated by the FormEditor.
private void initComponents() {//GEN-BEGIN:initComponents
java.awt.GridBagConstraints gridBagConstraints;
jLabel1 = new javax.swing.JLabel();
textIn = new javax.swing.JTextField();
jLabel2 = new javax.swing.JLabel();
intIn = new javax.swing.JTextField();
jLabel3 = new javax.swing.JLabel();
numIn = new javax.swing.JTextField();
jLabel4 = new javax.swing.JLabel();
dateIn = new javax.swing.JTextField();
jLabel5 = new javax.swing.JLabel();
dateTimeIn = new javax.swing.JTextField();
jLabel6 = new javax.swing.JLabel();
jCheckBox1 = new javax.swing.JCheckBox();
keepValues = new javax.swing.JCheckBox();
jButton1 = new javax.swing.JButton();
setLayout(new java.awt.GridBagLayout());
jLabel1.setText("Text");
add(jLabel1, new java.awt.GridBagConstraints());
textIn.setName("ttext");
textIn.setPreferredSize(new java.awt.Dimension(100, 21));
textIn.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
textInActionPerformed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridwidth = 2;
add(textIn, gridBagConstraints);
jLabel2.setText("Integer");
add(jLabel2, new java.awt.GridBagConstraints());
intIn.setName("tint");
intIn.setPreferredSize(new java.awt.Dimension(50, 21));
add(intIn, new java.awt.GridBagConstraints());
jLabel3.setText("Number");
add(jLabel3, new java.awt.GridBagConstraints());
numIn.setName("tnum");
numIn.setPreferredSize(new java.awt.Dimension(50, 21));
add(numIn, new java.awt.GridBagConstraints());
jLabel4.setText("Date");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 0;
gridBagConstraints.gridy = 1;
add(jLabel4, gridBagConstraints);
dateIn.setName("tdate");
dateIn.setPreferredSize(new java.awt.Dimension(50, 21));
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 1;
gridBagConstraints.gridy = 1;
add(dateIn, gridBagConstraints);
jLabel5.setText("DateTime");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 2;
gridBagConstraints.gridy = 1;
add(jLabel5, gridBagConstraints);
dateTimeIn.setName("tidate");
dateTimeIn.setPreferredSize(new java.awt.Dimension(80, 21));
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridy = 1;
add(dateTimeIn, gridBagConstraints);
jLabel6.setText("Bit");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridy = 1;
add(jLabel6, gridBagConstraints);
jCheckBox1.setName("tbit");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridy = 1;
add(jCheckBox1, gridBagConstraints);
keepValues.setText("keep values");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 7;
gridBagConstraints.gridy = 3;
add(keepValues, gridBagConstraints);
jButton1.setText("Send");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 7;
gridBagConstraints.gridy = 2;
add(jButton1, gridBagConstraints);
}//GEN-END:initComponents
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_jButton1ActionPerformed
sendRow();
}//GEN-LAST:event_jButton1ActionPerformed
private boolean sendRow() {
java.util.HashMap hm = new java.util.HashMap();
Component[] cs = this.getComponents();
for (int i = 0; i < cs.length; i++) {
if (((Component) cs).getName() != null) {
if (cs[i] instanceof JCheckBox) {
String value = ((JCheckBox) cs[i]).isSelected() ? "1" : "0";
hm.put(cs[i].getName(), value);
} else if (cs[i] instanceof JCheckBox) {
hm.put(cs[i].getName(), ((JTextField) cs[i]).getText());
} // end for
firePropertyChange("rowChanged", null, hm);
return true;
private void getRow(java.util.HashMap hm) {
//if (! this.keepValues.isSelected()) {
Component[] cs = this.getComponents();
for (int i = 0; i < cs.length; i++) {
if (cs[i].getName() != null && hm.containsKey(cs[i].getName())) {
Component component = cs[i];
String componentName = cs[i].getName();
String componentValue = (String) hm.get(component.getName());
if (cs[i] instanceof JTextField) {
// output for debugging
System.out.println("Setting " + cs[i].getName() + " = "
+ componentValue);
((JTextField) component).setText(componentValue);
} else if (cs[i] instanceof JCheckBox) {
// output for debugging
System.out.println("JCheckBox found");
JCheckBox cb = (JCheckBox) component;
boolean selected = (componentValue == null ? false : (componentValue.equals("1")
? true
: false));
((JCheckBox) component).setSelected(selected);
} // end for
/* Uncomment this code snippet to retrieve the text that has been set
for the components (that means JTextFields)
This is just for debugging !
Component[] cs = this.getComponents(); for (int i = 0; i < cs.length;
i++) { if (cs[i].getName() != null) { if (cs[i] instanceof
JTextField) { System.out.println("Value of " +cs[i].getName() + " = " +
((JTextField) cs[i]).getText()); } } } // end for
private void textInActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_textInActionPerformed
}//GEN-LAST:event_textInActionPerformed
public void keyPressed(java.awt.event.KeyEvent e) {
if (e.getKeyCode() == java.awt.event.KeyEvent.VK_ENTER) {
sendRow();
public void keyReleased(java.awt.event.KeyEvent e) {
public void keyTyped(java.awt.event.KeyEvent e) {
public void propertyChange(java.beans.PropertyChangeEvent evt) {
if (evt.getPropertyName().equals("newRow")) {
final PropertyChangeEvent finalEvt = evt;
Runnable makeChanges = new Runnable () {
public void run() {
getRow((java.util.HashMap) finalEvt.getNewValue());
// Variables declaration - do not modify//GEN-BEGIN:variables
private javax.swing.JTextField dateIn;
private javax.swing.JTextField dateTimeIn;
private javax.swing.JTextField intIn;
private javax.swing.JButton jButton1;
private javax.swing.JCheckBox jCheckBox1;
private javax.swing.JLabel jLabel1;
private javax.swing.JLabel jLabel2;
private javax.swing.JLabel jLabel3;
private javax.swing.JLabel jLabel4;
private javax.swing.JLabel jLabel5;
private javax.swing.JLabel jLabel6;
private javax.swing.JCheckBox keepValues;
private javax.swing.JTextField numIn;
private javax.swing.JTextField textIn;
// End of variables declaration//GEN-END:variablesThe problem of the change in the form not being comitted is that
I forgot SwingUtilities.invokeLater(makeChanges); in the bottom
part in public void propertyChange(java.beans.PropertyChangeEvent evt)
after having created a new Runnable.
Changes to the UI often have to be comitted by SwingUtitlities.invokeLater()
though I don't know that much about Swing yet.
Thanks to everybody who tried to solve that problem.
Benjamin -
Query response time takes more time when calling from package
SELECT
/* UTILITIES_PKG.GET_COUNTRY_CODE(E.EMP_ID,E.EMP_NO) COUNTRY_ID */
(SELECT DISTINCT IE.COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID =E.EMP_ID
AND IE.EMP_NO = E.EMP_NO
AND IE.STATUS = 'OPEN' ) COUNTRY_ID
FROM EMPLOYEE E
CREATE OR REPLACE PACKAGE BODY UTILITIES_PKG AS
FUNCTION GET_COUNTRY_CODE(P_EMP_ID IN VARCHAR2, P_EMP_NO IN VARCHAR2)
RETURN VARCHAR2 IS
L_COUNTRY_ID VARCHAR2(25) := '';
BEGIN
SELECT DISTINCT IE.COUNTRY_ID
INTO L_COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID = P_EMP_ID
AND IE.EMP_NO = P_EMP_NO
AND IE.STATUS = 'OPEN';
RETURN L_COUNTRY_ID;
EXCEPTION
WHEN OTHERS THEN
RETURN 'CONT';
END;
END UTILITIES_PKG;
when I run above query its coming in 1.2 seconds.but when comment subquery and call from package its taking 9 seconds.query returns more than 2000 records.i am not able to find the reason why it is taking more time when calling from package?You are getting a different plan when you run it as PL/SQL most likely. Comment your statement:
SELECT /* your comment here */then find them in V$SQL and get the SQL IDs. You can then use DBMS_XPLAN.DISPLAY_CURSOR to see what is actually happening.
http://www.psoug.org/reference/dbms_xplan.html -
SESSION EXPIRED and CPU Utilisation is 100% when called from Pro*C
Dear Colleague
We are having a production system developed using Pro*c and PL/SOL packages in HP Unix.
The system is doing the following,
A file will be decoded using Proc and data will be load into 3 temporary tables (permanent table used for temporary) using SQLLoader. Then it calls a PL/SQL package which will process the data in the temporary tables and will store the summary information in Transaction table and will returns a unique id to the calling Pro*c module. The whole process is completed in a single process/oracle session.
The PL/SQL package, join the 3 Temporary tables and retrieve the data into an Oracle object(Collection) and process it. Then the processing summary will be loaded into Transaction table and return the Primary key.
Now the problem is, when the temporary tables are loaded with more than 200,000 rows, in some cases the system is running for hours before it finish. And during the process the session shows as EXPIRED in the database and CPU utilization for the respective ProcessId in Unix is almost 100%. Then after a while the session comes alive and finishes the process.
And for some other cases, with same row count, the entire process finished in seconds.
If the same process (PL/SQL package) when run directly using a separate session inside the database(and the temporary tables are still available), rather than calling from Pro*c, it finishes in seconds, where it took hours when called from Pro*c.
It will be highly appreciated, if anyone let me know, what actually is wrong. whether it is the resource allocation or should there any known problem in calling huge PL/SQL packages from Pro*C.
we are using Oracle 10g and HP-UX ed42 B.11.31 U System.
regards
SajidDear Colleague
I just want to rephrase the problem again.
We have a Pro*C application. This will read the binary file and dump the data in ascii format to a data file. Then, within from the pro*C, 14 Dynamic tables will be created using EXEC SQL EXECUTE IMMEDIATE statement, each having almost a maximum of 45 columns. Also, created INDEXES to the tables in the same way from Pro*C.
And Control file will be created as follows
OPTIONS (SILENT=(FEEDBACK)) UNRECOVERABLE
LOAD DATA
INTO TABLE FILENAME_BCI_USED
FIELDS TERMINATED BY '|'
TRAILING NULLCOLSColumns Listed
Then Sql loader will be called using system commands (from pro*C itself) to loead the data into the table, as follows.
sprintf(syscommand,"sqlldr %s CONTROL=%s DATA=%s log=%s rows=5000 direct=true", glb_connect_string,ctl_file,data_file, log_file );
ret_value = system(syscommand);data loaded successfully.
Then the Pro*C will call a PL/SQL package for processing the data.
The PL/SQL package, to process the data, dynamically construct the below query and use it for the reference cursor to retrieve data and load into a collection.
v_sql_query := 'SELECT '|| '/*+ index(b '||p_File_Name ||'_1) index(b '||p_File_Name ||'_2) index(s '||p_File_Name ||'_3) index(s '||p_File_Name ||'_4) index(s '||p_File_Name ||'_5) index(s '||p_File_Name ||'_6) index(e '||p_File_Name ||'_7)*/' || '
iot_call_record(b.rec_no ,
b.rec_type ,
substr(b.field1,1,15) ,
nvl(substr((select s0.field1 from ' || SU_Table ||
' s0 where s0.rec_no = s.rec_no and s0.sub_rec_type = 203) ,1, 25),
substr(b.field2, 1, 25)),
substr(b.field3,1,25) ,
b.field4 ,
b.field5 ,
s.field1 ,
s.field2 ,
(select sum(s1.field1) from ' || SU_Table ||
' s1 where s1.field2 = s.rec_no and trim(s1.field2) = ''00'' ) ,
s.field3 ,
e.field2/power(10,e.field3) ,
s.field4 ,
s.field5 ,
s.field6 ,
s.field7 ,
s.field8 ,
s.field9 ,
s.field10 ,
nvl(b.field6,''F'') ,
NULL ,
s.field11 ,
(select sum(s2.field11) from ' || SU_Table || ' s2 where s2.rec_no = s.rec_no) ,
NULL)
FROM ' || BCI_Table || ' b , ' || SU_Table || ' s, ' || EXCH_Table ||
' e WHERE b.filename = s.filename
AND b.rec_no = s.rec_no
AND (b.field7 = 0 OR b.field7 = 1)
AND TRIM(s.chg_type) = ''00''
AND (s.field1 = e.field2_Code )
AND not(s.field4 = ''V'' and s.field12 > 1)
AND not(s.field4 = ''W'' and s.field12 > 1)
AND not(b.rec_type = 75 and s.field12 > 1)
AND not(b.rec_type = 75 and s.field4 =''D'')
AND s.sub_rec_type <> 203
and (s.field12 = 1 or b.rec_type not in (20,30))';
OPEN cur_call_events FOR v_sql_query;
LOOP
g_tab_call_events.DELETE;
-- Execute immediate v_sql_query bulk collect into g_tab_call_events;
FETCH cur_call_events BULK COLLECT
INTO g_tab_call_events limit 5000;
EXIT WHEN g_tab_call_events.COUNT = 0;
BEGIN
SAVEPOINT Block_Begin;
process_records(p_file_name,
g_tab_call_events);
EXCEPTION
WHEN Severe_Error THEN
Write_error('S');
ROLLBACK TO Block_Begin;
WHEN Warning THEN
Write_error('W');
WHEN NO_DATA_FOUND THEN
Write_error('S');
ROLLBACK TO Block_Begin;
END;
END LOOP;And the above module is behaving strangely.
With almost 150K or more rows in BCI_Table & SU_Table each and less than 10 rows in EXCH_Table, the application takes more than 100 minutes to complete the process.
When we checked the session activity, it is showing the same query for a very long time.
Where as files with 100K or less rows are getting processed in a minute.
And the performance for 150K+ rows is inconsistent, that when we isolate the package and run it directly calling from oracle, it is getting executed in less than 4 minutes. Whereas it takes 100+ minutes from Pro*C.
The execution plan for the above query is given below
Object Owner Object Name Cost Cardinality Bytes CPU cost IO cost
SELECT STATEMENT, GOAL = HINT: FIRST_ROWS 494 2497 494406 143334576 483
TABLE ACCESS BY INDEX ROWID SCHEMA1 FILENAME_SU_USED 4 1 21 30610 4
INDEX RANGE SCAN SCHEMA1 FILENAME_3 3 1 21764 3
SORT AGGREGATE 1 13
INDEX RANGE SCAN SCHEMA1 FILENAME_5 3 1 13 22064 3
SORT AGGREGATE 1 7
TABLE ACCESS BY INDEX ROWID SCHEMA1 FILENAME_SU_USED 4 1 7 30706 4
INDEX RANGE SCAN SCHEMA1 FILENAME_3 3 1 21764 3
CONCATENATION
HASH JOIN 355 2496 1307904 103068617 347
TABLE ACCESS FULL SCHEMA1 FILENAME_EXCH_USED 3 2 26 35987 3
HASH JOIN 352 2496 813696 96532618 344
VIEW SYS VW_NSO_1 4 20 880 12549326 3
HASH UNIQUE 4 20 220 12549326 3
TABLE ACCESS FULL SCHEMA2 IOT_SERVICE_MATRIX 3 20 220 45207 3
HASH JOIN 347 15850 2234850 76145180 341
TABLE ACCESS FULL SCHEMA1 FILENAME_SU_USED 130 16584 1111128 33625872 127
TABLE ACCESS FULL SCHEMA1 FILENAME_BCI_USED 217 23757 1758018 31405896 214
NESTED LOOPS 139 1 198 40265959 136
NESTED LOOPS 135 1 154 27716633 133
NESTED LOOPS 132 1 141 27680646 130
TABLE ACCESS FULL SCHEMA1 FILENAME_SU_USED 129 1 67 27655992 127
TABLE ACCESS BY INDEX ROWID SCHEMA1 FILENAME_BCI_USED 3 1 74 24654 3
INDEX RANGE SCAN SCHEMA1 FILENAME_1 2 1 15493 2
TABLE ACCESS FULL SCHEMA1 FILENAME_EXCH_USED 3 1 13 35987 3
VIEW SYS VW_NSO_1 4 1 44 12549326 3
SORT UNIQUE 4 20 220 12549326 3
TABLE ACCESS FULL SCHEMA2 IOT_SERVICE_MATRIX 3 20 220 45207 3Regards
Sajid
Edited by: user12039545 on Jul 11, 2010 12:05 AM
Edited by: user12039545 on Jul 11, 2010 12:15 AM
Edited by: user12039545 on Jul 11, 2010 12:32 AM
Edited by: user12039545 on Jul 11, 2010 12:34 AM
Edited by: user12039545 on Jul 11, 2010 12:37 AM -
BAPI returns less number of records when called from WebDynpro
Hi,
We have a BAPI which updates some tables and then bring back output in the form of a table.
When we execute BAPI from R/3 we get all records. When we execute the BAPI using webdynpro, for the same input values, we are always getting 22 records. This count remains same always.
When we had put a breakpoint in the BAPI and tested it using webdynpro, we get few more records. Wondering what is the prob?
Any help?
regards,
ShabeerHi,
Are you using the same user when running the BAPI form R/3 and from the portal?
We had a similar problem when the user from the portal didn't have the necessary authorizations.
Adi. -
Advanced table:not able to view more than 10 rows when called from workflow
Hi everyone,
I'm calling a page that contains advanced table and its controller class from two places.
First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and when we click on Next link, other rows are shown. This is becuase I have given the records displayed property on adavanced table = 10. I'm fine till here.
Second one is I'm calling this page again from a workflow notificaiton. There is a link called view more details on the workflow notification , click of this link will open the page with 10 records displayed. But when user tries to click on Next it doesn't work. It just doesn't refresh.
Its very wierd,. not able to understand what could be wrong when calling from wf notificiton. Its the same page and conroller code used in both the places.
Please help me!!
Thanks
SunnyThanks for your response Kristofer. You are correct, there was a difference in the parameters and the issue is resolved now.
-
Set the default field value to transaction code field, when calling from WD
Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
SanketHi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
host TYPE string,
port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
IMPORTING host = host
port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well? -
Subtemplate footer is not coming when calling from the main template
Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
AmbadasHi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas
Maybe you are looking for
-
just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name: iMac Model Identifier: iMac7,1 Processor Name: Intel Core 2 Duo Processor Speed: 2 GHz Number Of Processors: 1 T
-
Has anyone experienced Apple Mail flattening .PSD file attachment when sending?
One of my students encountered the case when Apple Mail flattens .PSD file when sending an attachment. Running latest Mac OS X 10.6.2 (10C540) Mail Version 4.2 (1077). Multi layered .PSD file 120K was saved on desktop and than attached to email. None
-
How to display name in the posting rather than number
Hello All, I want my name to be dispayed instead of 403868, what should I do? Regards
-
Setting Page Size as a Percentage vs. pixels for optimal viewing
Is there a way to set the size of my web pages as percentages so that when viewer open my site, the pages will automatically resize itself to fit the computer on which it is being viewed? Thanks in advance! :)L
-
Cannot get to Acrobat X Pro after Installing
I installed Acrobat X Pro on a server. Icon is white and says Acrobat X Pro but when I open it it is only reader. I do not have Reader installed on the server. I also have already gone to edit:preferences:general and chose the default to Acrobat X Pr